mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Philipp Zabel <p.zabel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Subject: [PATCH 3/3] video: tc358767: add eDP video encoder driver
Date: Wed, 24 Aug 2016 12:40:19 +0200	[thread overview]
Message-ID: <1472035219-23917-3-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1472035219-23917-1-git-send-email-p.zabel@pengutronix.de>

From: Andrey Gusakov <andrey.gusakov@cogentembedded.com>

This patch adds support for the Toshiba TC358767 eDP bridge,
connected via DPI.

Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/video/Kconfig    |    8 +
 drivers/video/Makefile   |    1 +
 drivers/video/tc358767.c | 1313 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1322 insertions(+)
 create mode 100644 drivers/video/tc358767.c

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7ff67e5..2457bb9 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -127,6 +127,14 @@ config DRIVER_VIDEO_MTL017
 	  The MTL017 is a parallel to lvds video encoder chip found on the
 	  Efika MX Smartbook.
 
+config DRIVER_VIDEO_TC358767
+	bool "TC358767A Display Port encoder"
+	select VIDEO_VPL
+	depends on I2C
+	depends on OFTREE
+	help
+	  The TC358767A is a DSI/DPI to eDP video encoder chip
+
 config DRIVER_VIDEO_SIMPLE_PANEL
 	bool "Simple panel support"
 	select VIDEO_VPL
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a64fc5f..1bf2e1f 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DRIVER_VIDEO_BACKLIGHT_PWM) += backlight-pwm.o
 obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbconsole.o
 obj-$(CONFIG_VIDEO_VPL) += vpl.o
 obj-$(CONFIG_DRIVER_VIDEO_MTL017) += mtl017.o
+obj-$(CONFIG_DRIVER_VIDEO_TC358767) += tc358767.o
 obj-$(CONFIG_DRIVER_VIDEO_SIMPLE_PANEL) += simple-panel.o
 
 obj-$(CONFIG_DRIVER_VIDEO_ATMEL) += atmel_lcdfb.o atmel_lcdfb_core.o
diff --git a/drivers/video/tc358767.c b/drivers/video/tc358767.c
new file mode 100644
index 0000000..f2ea198
--- /dev/null
+++ b/drivers/video/tc358767.c
@@ -0,0 +1,1313 @@
+/*
+ * tc358767 eDP encoder driver
+ *
+ * Copyright (C) 2016 CogentEmbedded Inc
+ * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+ *
+ * Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <malloc.h>
+#include <errno.h>
+#include <i2c/i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <gpio.h>
+#include <of_gpio.h>
+#include <video/media-bus-format.h>
+#include <video/vpl.h>
+#include <asm-generic/div64.h>
+
+#define DP_LINK_BW_SET			0x100
+#define DP_TRAINING_PATTERN_SET		0x102
+
+#define DP_DOWNSPREAD_CTRL		0x107
+#define DP_SPREAD_AMP_0_5		(1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	0x108
+#define DP_SET_ANSI_8B10B		(1 << 0)
+
+#define DP_LANE0_1_STATUS		0x202
+#define DP_LANE2_3_STATUS		0x202
+#define DP_LANE_CR_DONE			(1 << 0)
+#define DP_LANE_CHANNEL_EQ_DONE		(1 << 1)
+#define DP_LANE_SYMBOL_LOCKED		(1 << 2)
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |           \
+			    DP_LANE_CHANNEL_EQ_DONE |   \
+			    DP_LANE_SYMBOL_LOCKED)
+
+#define DP_LAINE_ALIGN_STATUS_UPDATED	0x204
+#define DP_INTERLANE_ALIGN_DONE		(1 << 0)
+
+#define DP_LINK_SCRAMBLING_DISABLE      0x20
+#define DP_TRAINING_PATTERN_1		1
+#define DP_TRAINING_PATTERN_2		2
+
+#define DP_EDP_CONFIGURATION_SET		0x10a
+#define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE     (1 << 0)
+
+/* Registers */
+
+/* Display Parallel Interface */
+#define DPIPXLFMT		0x0440
+#define VS_POL_ACTIVE_LOW		(1 << 10)
+#define HS_POL_ACTIVE_LOW		(1 << 9)
+#define DE_POL_ACTIVE_HIGH		(0 << 8)
+#define SUB_CFG_TYPE_CONFIG1		(0 << 2) /* LSB aligned */
+#define SUB_CFG_TYPE_CONFIG2		(1 << 2) /* Loosely Packed */
+#define SUB_CFG_TYPE_CONFIG3		(2 << 2) /* LSB aligned 8-bit */
+#define DPI_BPP_RGB888			(0 << 0)
+#define DPI_BPP_RGB666			(1 << 0)
+#define DPI_BPP_RGB565			(2 << 0)
+
+/* Video Path */
+#define VPCTRL0			0x0450
+#define OPXLFMT_RGB666			(0 << 8)
+#define OPXLFMT_RGB888			(1 << 8)
+#define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
+#define FRMSYNC_ENABLED			(1 << 4) /* Video Timing Gen Enabled */
+#define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
+#define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
+#define HTIM01			0x0454
+#define HTIM02			0x0458
+#define VTIM01			0x045c
+#define VTIM02			0x0460
+#define VFUEN0			0x0464
+#define VFUEN				BIT(0)   /* Video Frame Timing Upload */
+
+/* System */
+#define TC_IDREG		0x0500
+#define SYSCTRL			0x0510
+#define DP0_AUDSRC_NO_INPUT		(0 << 3)
+#define DP0_AUDSRC_I2S_RX		(1 << 3)
+#define DP0_VIDSRC_NO_INPUT		(0 << 0)
+#define DP0_VIDSRC_DSI_RX		(1 << 0)
+#define DP0_VIDSRC_DPI_RX		(2 << 0)
+#define DP0_VIDSRC_COLOR_BAR		(3 << 0)
+
+/* Control */
+#define DP0CTL			0x0600
+#define VID_MN_GEN			BIT(6)   /* Auto-generate M/N values */
+#define EF_EN				BIT(5)   /* Enable Enhanced Framing */
+#define VID_EN				BIT(1)   /* Video transmission enable */
+#define DP_EN				BIT(0)   /* Enable DPTX function */
+
+/* Clocks */
+#define DP0_VIDMNGEN0		0x0610
+#define DP0_VIDMNGEN1		0x0614
+#define DP0_VMNGENSTATUS	0x0618
+
+/* Main Channel */
+#define DP0_SECSAMPLE		0x0640
+#define DP0_VIDSYNCDELAY	0x0644
+#define DP0_TOTALVAL		0x0648
+#define DP0_STARTVAL		0x064c
+#define DP0_ACTIVEVAL		0x0650
+#define DP0_SYNCVAL		0x0654
+#define DP0_MISC		0x0658
+#define TU_SIZE_RECOMMENDED		(0x3f << 16) /* LSCLK cycles per TU */
+#define BPC_6				(0 << 5)
+#define BPC_8				(1 << 5)
+
+/* AUX channel */
+#define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG1		0x0664
+#define AUX_RX_FILTER_EN		BIT(16)
+
+#define DP0_AUXADDR		0x0668
+#define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
+#define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
+#define DP0_AUXSTATUS		0x068c
+#define AUX_STATUS_MASK			0xf0
+#define AUX_STATUS_SHIFT		4
+#define AUX_TIMEOUT			BIT(1)
+#define AUX_BUSY			BIT(0)
+#define DP0_AUXI2CADR		0x0698
+
+/* Link Training */
+#define DP0_SRCCTRL		0x06a0
+#define DP0_SRCCTRL_SCRMBLDIS		BIT(13)
+#define DP0_SRCCTRL_EN810B		BIT(12)
+#define DP0_SRCCTRL_NOTP		(0 << 8)
+#define DP0_SRCCTRL_TP1			(1 << 8)
+#define DP0_SRCCTRL_TP2			(2 << 8)
+#define DP0_SRCCTRL_LANESKEW		BIT(7)
+#define DP0_SRCCTRL_SSCG		BIT(3)
+#define DP0_SRCCTRL_LANES_1		(0 << 2)
+#define DP0_SRCCTRL_LANES_2		(1 << 2)
+#define DP0_SRCCTRL_BW27		(1 << 1)
+#define DP0_SRCCTRL_BW162		(0 << 1)
+#define DP0_SRCCTRL_AUTOCORRECT		BIT(0)
+#define DP0_LTSTAT		0x06d0
+#define LT_LOOPDONE			BIT(13)
+#define LT_STATUS_MASK			(0x1f << 8)
+#define LT_CHANNEL1_EQ_BITS		(DP_CHANNEL_EQ_BITS << 4)
+#define LT_INTERLANE_ALIGN_DONE		BIT(3)
+#define LT_CHANNEL0_EQ_BITS		(DP_CHANNEL_EQ_BITS)
+#define DP0_SNKLTCHGREQ		0x06d4
+#define DP0_LTLOOPCTRL		0x06d8
+#define DP0_SNKLTCTRL		0x06e4
+
+/* PHY */
+#define DP_PHY_CTRL		0x0800
+#define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
+#define BGREN				BIT(25)  /* AUX PHY BGR Enable */
+#define PWR_SW_EN			BIT(24)  /* PHY Power Switch Enable */
+#define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
+#define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
+#define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
+#define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
+
+/* PLL */
+#define DP0_PLLCTRL		0x0900
+#define DP1_PLLCTRL		0x0904	/* not defined in DS */
+#define PXL_PLLCTRL		0x0908
+#define PLLUPDATE			BIT(2)
+#define PLLBYP				BIT(1)
+#define PLLEN				BIT(0)
+#define PXL_PLLPARAM		0x0914
+#define IN_SEL_REFCLK			(0 << 14)
+#define SYS_PLLPARAM		0x0918
+#define REF_FREQ_38M4			(0 << 8) /* 38.4 MHz */
+#define REF_FREQ_19M2			(1 << 8) /* 19.2 MHz */
+#define REF_FREQ_26M			(2 << 8) /* 26 MHz */
+#define REF_FREQ_13M			(3 << 8) /* 13 MHz */
+#define SYSCLK_SEL_LSCLK		(0 << 4)
+#define LSCLK_DIV_1			(0 << 0)
+#define LSCLK_DIV_2			(1 << 0)
+
+/* Test & Debug */
+#define TSTCTL			0x0a00
+#define PLL_DBG			0x0a04
+
+struct tc_edp_link {
+	u8			rate;
+	u8			rev;
+	u8			lanes;
+	u8			enhanced;
+	u8			assr;
+	int			scrambler_dis;
+	int			spread;
+	int			coding8b10b;
+	u8			swing;
+	u8			preemp;
+};
+
+struct tc_data {
+	struct i2c_client	*client;
+	struct device_d		*dev;
+	/* DP AUX channel */
+	struct i2c_adapter	adapter;
+	struct vpl		vpl;
+
+	/* link settings */
+	struct tc_edp_link	link;
+
+	/* mode */
+	struct fb_videomode	*mode;
+
+	u32			rev;
+	u8			assr;
+
+	char			*edid;
+
+	int			sd_gpio;
+	int			sd_active_high;
+	int			reset_gpio;
+	int			reset_active_high;
+	struct clk		*refclk;
+};
+#define to_tc_i2c_struct(a)	container_of(a, struct tc_data, adapter)
+
+static int tc_write_reg(struct tc_data *data, u16 reg, u32 value)
+{
+	int ret;
+	u8 buf[4];
+
+	buf[0] = value & 0xff;
+	buf[1] = (value >> 8) & 0xff;
+	buf[2] = (value >> 16) & 0xff;
+	buf[3] = (value >> 24) & 0xff;
+
+	ret = i2c_write_reg(data->client, reg | I2C_ADDR_16_BIT, buf, 4);
+	if (ret != 4) {
+		dev_err(data->dev, "error writing reg 0x%04x: %d\n",
+			reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+
+static int tc_read_reg(struct tc_data *data, u16 reg, u32 *value)
+{
+	int ret;
+	u8 buf[4];
+
+	ret = i2c_read_reg(data->client, reg | I2C_ADDR_16_BIT, buf, 4);
+	if (ret != 4) {
+		dev_err(data->dev, "error reading reg 0x%04x: %d\n",
+			reg, ret);
+		return ret;
+	}
+
+	*value = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+
+	return 0;
+}
+
+/* simple macros to avoid error checks */
+#define tc_write(reg, var)	do {		\
+	ret = tc_write_reg(tc, reg, var);	\
+	if (ret)				\
+		goto err;			\
+	} while (0)
+#define tc_read(reg, var)	do {		\
+	ret = tc_read_reg(tc, reg, var);	\
+	if (ret)				\
+		goto err;			\
+	} while (0)
+
+static int tc_aux_get_status(struct tc_data *tc)
+{
+	int ret;
+	u32 value;
+
+	tc_read(DP0_AUXSTATUS, &value);
+	if ((value & 0x01) == 0x00) {
+		switch (value & 0xf0) {
+		case 0x00:
+			/* Ack */
+			return 0;
+		case 0x40:
+			/* Nack */
+			return -EIO;
+		case 0x80:
+			dev_err(tc->dev, "i2c defer\n");
+			return -EAGAIN;
+		}
+		return 0;
+	}
+
+	if (value & 0x02) {
+		dev_err(tc->dev, "i2c access timeout!\n");
+		return -ETIME;
+	}
+	return -EBUSY;
+err:
+	return ret;
+}
+
+static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
+{
+	int ret;
+	u32 value;
+
+	do {
+		tc_read(DP0_AUXSTATUS, &value);
+		if ((value & AUX_BUSY) == 0x00)
+			return 0;
+		mdelay(1);
+	} while (timeout_ms--);
+
+	return -EBUSY;
+err:
+	return ret;
+}
+
+static int tc_aux_read(struct tc_data *tc, int reg, char *data, int size)
+{
+	int i = 0;
+	int ret;
+	u32 tmp;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	/* store address */
+	tc_write(DP0_AUXADDR, reg);
+	/* start transfer */
+	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | 0x09);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc);
+	if (ret)
+		goto err;
+
+	/* read data */
+	while (i < size) {
+		if ((i % 4) == 0)
+			tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+		data[i] = tmp & 0xFF;
+		tmp = tmp >> 8;
+		i++;
+	}
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_read error: %d\n", ret);
+	return ret;
+}
+
+static int tc_aux_write(struct tc_data *tc, int reg, char *data, int size)
+{
+	int i = 0;
+	int ret;
+	u32 tmp = 0;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	i = 0;
+	/* store data */
+	while (i < size) {
+		tmp = tmp | (data[i] << (8 * (i & 0x03)));
+		i++;
+		if (((i % 4) == 0) ||
+		    (i == size)) {
+			tc_write(DP0_AUXWDATA(i >> 2), tmp);
+			tmp = 0;
+		}
+	}
+	/* store address */
+	tc_write(DP0_AUXADDR, reg);
+	/* start transfer */
+	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | 0x08);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_write error: %d\n", ret);
+	return ret;
+}
+
+static int tc_aux_i2c_read(struct tc_data *tc, struct i2c_msg *msg)
+{
+	int i = 0;
+	int ret;
+	u32 tmp;
+
+	if (msg->flags & I2C_M_DATA_ONLY)
+		return -EINVAL;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	/* store address */
+	tc_write(DP0_AUXADDR, msg->addr);
+
+	/* start transfer */
+	tc_write(DP0_AUXCFG0, ((msg->len - 1) << 8) | 0x01);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc);
+	if (ret)
+		goto err;
+
+	/* read data */
+	while (i < msg->len) {
+		if ((i % 4) == 0)
+			tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+		msg->buf[i] = tmp & 0xFF;
+		tmp = tmp >> 8;
+		i++;
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_i2c_write(struct tc_data *tc, struct i2c_msg *msg)
+{
+	int i = 0;
+	int ret;
+	u32 tmp = 0;
+
+	if (msg->flags & I2C_M_DATA_ONLY)
+		return -EINVAL;
+
+	if (msg->len > 16) {
+		dev_err(tc->dev, "this bus support max 16 bytes per transfer\n");
+		return -EINVAL;
+	}
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	/* store data */
+	while (i < msg->len) {
+		tmp = (tmp << 8) | msg->buf[i];
+		i++;
+		if (((i % 4) == 0) ||
+		    (i == msg->len)) {
+			tc_write(DP0_AUXWDATA(i >> 2), tmp);
+			tmp = 0;
+		}
+	}
+	/* store address */
+	tc_write(DP0_AUXADDR, msg->addr);
+	/* start transfer */
+	tc_write(DP0_AUXCFG0, ((msg->len - 1) << 8) | 0x00);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_i2c_xfer(struct i2c_adapter *adapter,
+			struct i2c_msg *msgs, int num)
+{
+	struct tc_data *tc = to_tc_i2c_struct(adapter);
+	unsigned int i;
+	int ret;
+
+	/* check */
+	for (i = 0; i < num; i++) {
+		if (msgs[i].len > 16) {
+			dev_err(tc->dev, "this bus support max 16 bytes per transfer\n");
+			return -EINVAL;
+		}
+	}
+
+	/* read/write data */
+	for (i = 0; i < num; i++) {
+		/* write/read data */
+		if (msgs[i].flags & I2C_M_RD)
+			ret = tc_aux_i2c_read(tc, &msgs[i]);
+		else
+			ret = tc_aux_i2c_write(tc, &msgs[i]);
+		if (ret)
+			goto err;
+	}
+
+err:
+	return (ret < 0) ? ret : num;
+}
+
+static const char * const training_pattern1_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Max voltage reached error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static const char * const training_pattern2_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Clock recovery failed error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static u32 tc_srcctrl(struct tc_data *tc)
+{
+	/*
+	 * No training pattern, skew lane 1 data by two LSCLK cycles with
+	 * respect to lane 0 data, AutoCorrect Mode = 0
+	 */
+	u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW;
+
+	if (tc->link.scrambler_dis)
+		reg |= DP0_SRCCTRL_SCRMBLDIS;	/* Scrambler Disabled */
+	if (tc->link.coding8b10b)
+		/* Enable 8/10B Encoder (TxData[19:16] not used) */
+		reg |= DP0_SRCCTRL_EN810B;
+	if (tc->link.spread)
+		reg |= DP0_SRCCTRL_SSCG;	/* Spread Spectrum Enable */
+	if (tc->link.lanes == 2)
+		reg |= DP0_SRCCTRL_LANES_2;	/* Two Main Channel Lanes */
+	if (tc->link.rate != 0x06)
+		reg |= DP0_SRCCTRL_BW27;	/* 2.7 Gbps link */
+	return reg;
+}
+
+static void tc_wait_pll_lock(struct tc_data *tc)
+{
+	/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
+	mdelay(100);
+}
+
+static int tc_stream_clock_calc(struct tc_data *tc)
+{
+	int ret;
+	/*
+	 * If the Stream clock and Link Symbol clock are
+	 * asynchronous with each other, the value of M changes over
+	 * time. This way of generating link clock and stream
+	 * clock is called Asynchronous Clock mode. The value M
+	 * must change while the value N stays constant. The
+	 * value of N in this Asynchronous Clock mode must be set
+	 * to 2^15 or 32,768.
+	 *
+	 * LSCLK = 1/10 of high speed link clock
+	 *
+	 * f_STRMCLK = M/N * f_LSCLK
+	 * M/N = f_STRMCLK / f_LSCLK
+	 *
+	 */
+	tc_write(DP0_VIDMNGEN1, 32768);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+	unsigned long rate;
+	u32 value;
+	int ret;
+	int timeout;
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
+		return -EINVAL;
+	}
+
+	/* Setup DP-PHY / PLL */
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+
+	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+
+	/*
+	 * Initially PLLs are in bypass. Force PLL parameter update,
+	 * disable PLL bypass, enable PLL
+	 */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	timeout = 1000;
+	do {
+		tc_read(DP_PHY_CTRL, &value);
+		udelay(1);
+	} while ((!(value & (1 << 16))) && (--timeout));
+
+	if (timeout == 0) {
+		dev_err(tc->dev, "Timeout waiting for PHY to become ready");
+		return -ETIMEDOUT;
+	}
+
+	/* Setup AUX link */
+	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
+		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
+		 (0x3f << 0));	/* Aux Response Timeout Timer */
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
+	return ret;
+}
+
+static int tc_get_display_props(struct tc_data *tc)
+{
+	int ret;
+	/* temp buffer */
+	u8 tmp[8];
+
+	/* Read DP Rx Link Capability */
+	ret = tc_aux_read(tc, 0x000, tmp, 8);
+	if (ret)
+		goto err_dpcd_read;
+	/* check rev 1.0 or 1.1 */
+	if ((tmp[1] != 0x06) && (tmp[1] != 0x0a))
+		goto err_dpcd_inval;
+
+	tc->assr = !(tc->rev & 0x02);
+	tc->link.rev = tmp[0];
+	tc->link.rate = tmp[1];
+	tc->link.lanes = tmp[2] & 0x0f;
+	tc->link.enhanced = !!(tmp[2] & 0x80);
+	tc->link.spread = tmp[3] & 0x01;
+	tc->link.coding8b10b = tmp[6] & 0x01;
+	tc->link.scrambler_dis = 0;
+	/* read assr */
+	ret = tc_aux_read(tc, DP_EDP_CONFIGURATION_SET, tmp, 1);
+	if (ret)
+		goto err_dpcd_read;
+	tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+
+	dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
+		tc->link.rev >> 4,
+		tc->link.rev & 0x0f,
+		(tc->link.rate == 0x06) ? "1.62Gbps" : "2.7Gbps",
+		tc->link.lanes,
+		tc->link.enhanced ? "enhanced" : "non-enhanced");
+	dev_dbg(tc->dev, "ANSI 8B/10B: %d\n", tc->link.coding8b10b);
+	dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
+		tc->link.assr, tc->assr);
+
+	return 0;
+
+err_dpcd_read:
+	dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_inval:
+	dev_err(tc->dev, "invalid DPCD\n");
+	return -EINVAL;
+}
+
+static int tc_set_video_mode(struct tc_data *tc, struct fb_videomode *mode)
+{
+	int ret;
+	int htotal;
+	int vtotal;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	htotal = mode->hsync_len + mode->left_margin + mode->xres +
+		mode->right_margin;
+	vtotal = mode->vsync_len + mode->upper_margin + mode->yres +
+		mode->lower_margin;
+
+	dev_dbg(tc->dev, "set mode %dx%d\n", mode->xres, mode->yres);
+	dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
+		mode->left_margin, mode->right_margin, mode->hsync_len);
+	dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
+		mode->upper_margin, mode->lower_margin, mode->vsync_len);
+	dev_dbg(tc->dev, "total: %dx%d\n", htotal, vtotal);
+
+
+	/* LCD Ctl Frame Size */
+	tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
+		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	tc_write(HTIM01, (mode->left_margin << 16) |		/* H back porch */
+			 (mode->hsync_len << 0));		/* Hsync */
+	tc_write(HTIM02, (mode->right_margin << 16) |		/* H front porch */
+			 (mode->xres << 0));			/* width */
+	tc_write(VTIM01, (mode->upper_margin << 16) |		/* V back porch */
+			 (mode->vsync_len << 0));		/* Vsync */
+	tc_write(VTIM02, (mode->lower_margin << 16) |		/* V front porch */
+			 (mode->yres << 0));			/* height */
+	tc_write(VFUEN0, VFUEN);		/* update settings */
+
+	/* Test pattern settings */
+	tc_write(TSTCTL,
+		 (120 << 24) |	/* Red Color component value */
+		 (20 << 16) |	/* Green Color component value */
+		 (99 << 8) |	/* Blue Color component value */
+		 (1 << 4) |	/* Enable I2C Filter */
+		 (2 << 0) |	/* Color bar Mode */
+		 0);
+
+	/* DP Main Stream Attributes */
+	vid_sync_dly = mode->hsync_len + mode->left_margin + mode->xres;
+	tc_write(DP0_VIDSYNCDELAY,
+		 (0x003e << 16) |	/* thresh_dly */
+		 (vid_sync_dly << 0));
+
+	tc_write(DP0_TOTALVAL, (vtotal << 16) | (htotal));
+
+	tc_write(DP0_STARTVAL,
+		 ((mode->upper_margin + mode->vsync_len) << 16) |
+		 ((mode->left_margin + mode->hsync_len) << 0));
+
+	tc_write(DP0_ACTIVEVAL, (mode->yres << 16) | (mode->xres));
+
+	tc_write(DP0_SYNCVAL, (mode->vsync_len << 16) | (mode->hsync_len << 0));
+
+	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+	max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
+	tc_write(DP0_MISC, (max_tu_symbol << 23) | TU_SIZE_RECOMMENDED | BPC_8);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_link_training(struct tc_data *tc, int pattern)
+{
+	const char * const *errors;
+	u32 srcctrl = tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+		      DP0_SRCCTRL_AUTOCORRECT;
+	int timeout;
+	int retry;
+	u32 value;
+	int ret;
+
+	if (pattern == DP_TRAINING_PATTERN_1) {
+		srcctrl |= DP0_SRCCTRL_TP1;
+		errors = training_pattern1_errors;
+	} else {
+		srcctrl |= DP0_SRCCTRL_TP2;
+		errors = training_pattern2_errors;
+	}
+
+	/* Set DPCD 0x102 for Training Part 1 or 2 */
+	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE | pattern);
+
+	tc_write(DP0_LTLOOPCTRL,
+		 (0x0f << 28) |	/* Defer Iteration Count */
+		 (0x0f << 24) |	/* Loop Iteration Count */
+		 (0x0d << 0));	/* Loop Timer Delay */
+
+	retry = 5;
+	do {
+		/* Set DP0 Training Pattern */
+		tc_write(DP0_SRCCTRL, srcctrl);
+
+		/* Enable DP0 to start Link Training */
+		tc_write(DP0CTL, DP_EN);
+
+		/* wait */
+		timeout = 1000;
+		do {
+			tc_read(DP0_LTSTAT, &value);
+			udelay(1);
+		} while ((!(value & LT_LOOPDONE)) && (--timeout));
+		if (timeout == 0) {
+			dev_err(tc->dev, "Link training timeout!\n");
+		} else {
+			int pattern = (value >> 11) & 0x3;
+			int error = (value >> 8) & 0x7;
+
+			dev_dbg(tc->dev,
+				"Link training phase %d done after %d uS: %s\n",
+				pattern, 1000 - timeout, errors[error]);
+			if (pattern == DP_TRAINING_PATTERN_1 && error == 0)
+				break;
+			if (pattern == DP_TRAINING_PATTERN_2) {
+				value &= LT_CHANNEL1_EQ_BITS |
+					 LT_INTERLANE_ALIGN_DONE |
+					 LT_CHANNEL0_EQ_BITS;
+				/* in case of two lanes */
+				if ((tc->link.lanes == 2) &&
+				    (value == (LT_CHANNEL1_EQ_BITS |
+					       LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+				/* in case of one line */
+				if ((tc->link.lanes == 1) &&
+				    (value == (LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+			}
+		}
+		/* restart */
+		tc_write(DP0CTL, 0);
+		udelay(10);
+	} while (--retry);
+	if (retry == 0) {
+		dev_err(tc->dev, "Failed to finish training phase %d\n",
+			pattern);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_main_link_setup(struct tc_data *tc)
+{
+	struct device_d *dev = tc->dev;
+	unsigned int rate;
+	u32 dp_phy_ctrl;
+	int timeout;
+	bool aligned;
+	bool ready;
+	u32 value;
+	int ret;
+	u8 tmp[8];
+
+	/* display mode should be set at this point */
+	if (!tc->mode)
+		return -EINVAL;
+
+	/* from excel file - DP0_SrcCtrl */
+	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
+		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
+		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
+	/* from excel file - DP1_SrcCtrl */
+	tc_write(0x07a0, 0x00003083);
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		return -EINVAL;
+	}
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+	/* Setup Main Link */
+	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	mdelay(100);
+
+	/* PLL setup */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	/* Reset/Enable Main Links */
+	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	udelay(100);
+	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	timeout = 1000;
+	do {
+		tc_read(DP_PHY_CTRL, &value);
+		udelay(1);
+	} while ((!(value & PHY_RDY)) && (--timeout));
+
+	if (timeout == 0) {
+		dev_err(dev, "timeout waiting for phy become ready");
+		return -ETIMEDOUT;
+	}
+
+	/* Set misc: 8 bits per color */
+	tc_read(DP0_MISC, &value);
+	value |= BPC_8;
+	tc_write(DP0_MISC, value);
+
+	/*
+	 * ASSR mode
+	 * on TC358767 side ASSR configured through strap pin
+	 * seems there is no way to change this setting from SW
+	 *
+	 * check is tc configured for same mode
+	 */
+	if (tc->assr != tc->link.assr) {
+		dev_dbg(dev, "Trying to set display to ASSR: %d\n",
+			tc->assr);
+		/* try to set ASSR on display side */
+		tmp[0] = tc->assr;
+		ret = tc_aux_write(tc, DP_EDP_CONFIGURATION_SET, tmp, 1);
+		if (ret)
+			goto err_dpcd_read;
+		/* read back */
+		ret = tc_aux_read(tc, DP_EDP_CONFIGURATION_SET, tmp, 1);
+		if (ret)
+			goto err_dpcd_read;
+
+		if (tmp[0] != tc->assr) {
+			dev_warn(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
+				 tc->assr);
+			/* trying with disabled scrambler */
+			tc->link.scrambler_dis = 1;
+		}
+	}
+
+	/* Setup Link & DPRx Config for Training */
+	/* LINK_BW_SET */
+	tmp[0] = tc->link.rate;
+	/* LANE_COUNT_SET */
+	tmp[1] = tc->link.lanes;
+	if (tc->link.enhanced)
+		tmp[1] |= (1 << 7);
+	ret = tc_aux_write(tc, DP_LINK_BW_SET, tmp, 2);
+	if (ret)
+		goto err_dpcd_write;
+
+	/* DOWNSPREAD_CTRL */
+	tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
+	/* MAIN_LINK_CHANNEL_CODING_SET */
+	tmp[1] = tc->link.coding8b10b ? DP_SET_ANSI_8B10B : 0x00;
+	ret = tc_aux_write(tc, DP_DOWNSPREAD_CTRL, tmp, 2);
+	if (ret)
+		goto err_dpcd_write;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
+	if (ret)
+		goto err;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_2);
+	if (ret)
+		goto err;
+
+	/* Clear DPCD 0x102 */
+	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
+	tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
+	ret = tc_aux_write(tc, DP_TRAINING_PATTERN_SET, tmp, 1);
+	if (ret)
+		goto err_dpcd_write;
+
+	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+
+	/* Wait */
+	timeout = 100;
+	do {
+		udelay(1);
+		/* Read DPCD 0x200-0x206 */
+		ret = tc_aux_read(tc, 0x200, tmp, 7);
+		if (ret)
+			goto err_dpcd_read;
+		ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
+				     DP_CHANNEL_EQ_BITS));      /* Lane0 */
+		aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
+	} while ((--timeout) && !(ready && aligned));
+
+	if (timeout == 0) {
+		dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
+		dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
+			 tmp[1]);
+		dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
+		dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
+			 tmp[4]);
+		dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
+		dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
+			 tmp[6]);
+
+		if (!ready)
+			dev_err(dev, "Lane0/1 not ready\n");
+		if (!aligned)
+			dev_err(dev, "Lane0/1 not aligned\n");
+		return -EAGAIN;
+	}
+
+	ret = tc_set_video_mode(tc, tc->mode);
+	if (ret)
+		goto err;
+
+	/* Set M/N */
+	ret = tc_stream_clock_calc(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err_dpcd_read:
+	dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_write:
+	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
+err:
+	return ret;
+}
+
+static int tc_main_link_stream(struct tc_data *tc, int state)
+{
+	int ret;
+	u32 value;
+
+	dev_dbg(tc->dev, "stream: %d\n", state);
+
+	if (state) {
+		value = VID_MN_GEN | DP_EN;
+		if (tc->link.enhanced)
+			value |= EF_EN;
+		tc_write(DP0CTL, value);
+		/*
+		 * VID_EN assertion should be delayed by at least N * LSCLK
+		 * cycles from the time VID_MN_GEN is enabled in order to
+		 * generate stable values for VID_M. LSCLK is 270 MHz or
+		 * 162 MHz, VID_N is set to 32768 in  tc_stream_clock_calc(),
+		 * so a delay of at least 203 us should suffice.
+		 */
+		mdelay(1);
+		value |= VID_EN;
+		tc_write(DP0CTL, value);
+		/* Set input interface, currently DPI only */
+		value = DP0_AUDSRC_NO_INPUT | DP0_VIDSRC_DPI_RX;
+		tc_write(SYSCTRL, value);
+	} else {
+		tc_write(DP0CTL, 0);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+#define DDC_BLOCK_READ		5
+#define DDC_SEGMENT_ADDR	0x30
+#define DDC_ADDR		0x50
+#define EDID_LENGTH		0x80
+
+static int tc_read_edid(struct tc_data *tc)
+{
+	int i = 0;
+	int ret;
+	int block;
+	unsigned char start = 0;
+	unsigned char segment = 0;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= DDC_SEGMENT_ADDR,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &segment,
+		}, {
+			.addr	= DDC_ADDR,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= DDC_ADDR,
+			.flags	= I2C_M_RD,
+		}
+	};
+	tc->edid = xmalloc(EDID_LENGTH);
+
+	do {
+		block = min(DDC_BLOCK_READ, EDID_LENGTH - i);
+
+		msgs[2].buf = tc->edid + i;
+		msgs[2].len = block;
+
+		ret = i2c_transfer(&tc->adapter, msgs, 3);
+		if (ret < 0)
+			goto err;
+
+		i += DDC_BLOCK_READ;
+		start = i;
+	} while (i < EDID_LENGTH);
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "eDP display EDID:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, tc->edid,
+		       EDID_LENGTH, true);
+#endif
+
+	return 0;
+err:
+	free(tc->edid);
+	tc->edid = NULL;
+	dev_err(tc->dev, "tc_read_edid failed: %d\n", ret);
+	return ret;
+}
+
+static int tc_get_videomodes(struct tc_data *tc, struct display_timings *timings)
+{
+	int ret;
+
+	/* edid_read_i2c does not work due to limitation of eDP i2c */
+	if (!tc->edid) {
+		ret = tc_read_edid(tc);
+		if (ret) {
+			dev_err(tc->dev, "EDID read error: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = edid_to_display_timings(timings, tc->edid);
+	if (ret < 0) {
+		dev_err(tc->dev, "Failed to parse EDID: %d\n", ret);
+		return ret;
+	}
+
+	/* hsync, vsync active low */
+	timings->modes->sync &= ~(FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT);
+
+	return ret;
+}
+
+static int tc_ioctl(struct vpl *vpl, unsigned int port,
+			unsigned int cmd, void *ptr)
+{
+	struct tc_data *tc = container_of(vpl, struct tc_data, vpl);
+	u32 *bus_format;
+	int ret = 0;
+
+	switch (cmd) {
+	case VPL_PREPARE:
+		tc->mode = ptr;
+		break;
+	case VPL_ENABLE:
+		ret = tc_main_link_setup(tc);
+		if (ret < 0)
+			break;
+
+		ret = tc_main_link_stream(tc, 1);
+		break;
+	case VPL_DISABLE:
+		ret = tc_main_link_stream(tc, 0);
+		break;
+	case VPL_GET_VIDEOMODES:
+		ret = tc_get_videomodes(tc, ptr);
+		break;
+	case VPL_GET_BUS_FORMAT:
+		bus_format = ptr;
+		*bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int tc_probe(struct device_d *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tc_data *tc;
+	enum of_gpio_flags flags;
+	int ret;
+
+	tc = xzalloc(sizeof(struct tc_data));
+	if (!tc)
+		return -ENOMEM;
+
+	tc->client = client;
+	tc->dev = dev;
+
+	/* Shut down GPIO is optional */
+	tc->sd_gpio = of_get_named_gpio_flags(dev->device_node,
+			"shutdown-gpios", 0, &flags);
+	if (gpio_is_valid(tc->sd_gpio)) {
+		if (!(flags & OF_GPIO_ACTIVE_LOW))
+			tc->sd_active_high = 1;
+	}
+
+	/* Reset GPIO is optional */
+	tc->reset_gpio = of_get_named_gpio_flags(dev->device_node,
+			"reset-gpios", 0, &flags);
+	if (gpio_is_valid(tc->reset_gpio)) {
+		if (!(flags & OF_GPIO_ACTIVE_LOW))
+			tc->reset_active_high = 1;
+	}
+
+	if (gpio_is_valid(tc->sd_gpio)) {
+		ret = gpio_request(tc->sd_gpio, "tc358767");
+		if (ret) {
+			dev_err(tc->dev, "SD (%d) can not be requested\n", tc->sd_gpio);
+			return ret;
+		}
+		gpio_direction_output(tc->sd_gpio, 0);
+	}
+
+	tc->refclk = of_clk_get_by_name(dev->device_node, "ref");
+	if (IS_ERR(tc->refclk)) {
+		ret = PTR_ERR(tc->refclk);
+		dev_err(dev, "Failed to get refclk: %d\n", ret);
+		goto err;
+	}
+
+	ret = tc_read_reg(tc, TC_IDREG, &tc->rev);
+	if (ret) {
+		dev_err(tc->dev, "can not read device ID\n");
+		goto err;
+	}
+
+	if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
+		dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = tc_aux_link_setup(tc);
+	if (ret)
+		goto err;
+
+	/* Register DP AUX channel */
+	tc->adapter.master_xfer = tc_aux_i2c_xfer;
+	tc->adapter.nr = -1; /* any free */
+	tc->adapter.dev.parent = dev;
+	tc->adapter.dev.device_node = dev->device_node;
+	/* Add I2C adapter */
+	ret = i2c_add_numbered_adapter(&tc->adapter);
+	if (ret < 0) {
+		dev_err(tc->dev, "registration failed\n");
+		goto err;
+	}
+
+	ret = tc_get_display_props(tc);
+	if (ret)
+		goto err;
+
+	/* add vlp */
+	tc->vpl.node = dev->device_node;
+	tc->vpl.ioctl = tc_ioctl;
+	return vpl_register(&tc->vpl);
+
+err:
+	free(tc);
+	return ret;
+}
+
+static struct driver_d tc_driver = {
+	.name		= "tc358767",
+	.probe		= tc_probe,
+};
+
+static int tc_init(void)
+{
+	return i2c_driver_register(&tc_driver);
+}
+device_initcall(tc_init);
-- 
2.8.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-08-24 10:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-24 10:40 [PATCH 1/3] video: switch to media bus formats Philipp Zabel
2016-08-24 10:40 ` [PATCH 2/3] video: add VPL ioctl to get bus format Philipp Zabel
2016-08-24 10:40 ` Philipp Zabel [this message]
2016-08-25  6:28 ` [PATCH 1/3] video: switch to media bus formats Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472035219-23917-3-git-send-email-p.zabel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=andrey.gusakov@cogentembedded.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox