From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1beOe3-0002mr-4n for barebox@lists.infradead.org; Mon, 29 Aug 2016 15:38:43 +0000 From: Sascha Hauer Date: Mon, 29 Aug 2016 17:38:17 +0200 Message-Id: <1472485099-10551-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/3] ARM: i.MX6 Santaro: Add enable-delay for the display To: Barebox List The display needs a time to settle, set an enable-delay of 200ms to avoid flickering. Signed-off-by: Sascha Hauer --- arch/arm/dts/imx6q-guf-santaro.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/imx6q-guf-santaro.dts b/arch/arm/dts/imx6q-guf-santaro.dts index 2bd1a26..e8a2b96 100644 --- a/arch/arm/dts/imx6q-guf-santaro.dts +++ b/arch/arm/dts/imx6q-guf-santaro.dts @@ -63,6 +63,7 @@ compatible = "simple-panel"; backlight = <&backlight>; enable-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; + enable-delay = <200>; port { panel_in: endpoint { -- 2.8.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox