* [PATCH] usb: i.MX chipidea: Enable VBUS regulator when needed
@ 2016-09-05 6:24 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2016-09-05 6:24 UTC (permalink / raw)
To: Barebox List
We should enable VBUS only in host mode, not unconditionally
during probe(). Fix that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/imx/chipidea-imx.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index a799abe..9857fe5 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -150,13 +150,23 @@ static int imx_chipidea_probe_dt(struct imx_chipidea *ci)
static int ci_register_role(struct imx_chipidea *ci)
{
+ int ret;
+
if (ci->role_registered)
return -EBUSY;
if (ci->mode == IMX_USB_MODE_HOST) {
if (IS_ENABLED(CONFIG_USB_EHCI)) {
ci->role_registered = 1;
- return ehci_register(ci->dev, &ci->data);
+ ret = regulator_enable(ci->vbus);
+ if (ret)
+ return ret;
+
+ ret = ehci_register(ci->dev, &ci->data);
+ if (!ret)
+ return 0;
+
+ regulator_disable(ci->vbus);
} else {
dev_err(ci->dev, "Host support not available\n");
return -ENODEV;
@@ -242,9 +252,8 @@ static int imx_chipidea_probe(struct device_d *dev)
}
ci->vbus = regulator_get(dev, "vbus");
-
- if (!IS_ERR(ci->vbus))
- regulator_enable(ci->vbus);
+ if (IS_ERR(ci->vbus))
+ ci->vbus = NULL;
iores = dev_request_mem_resource(dev, 0);
if (IS_ERR(iores))
--
2.8.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-09-05 6:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-05 6:24 [PATCH] usb: i.MX chipidea: Enable VBUS regulator when needed Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox