mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/9] efi: move clocksource out of arch
Date: Fri, 10 Feb 2017 11:37:43 +0100	[thread overview]
Message-ID: <1486723070-32548-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1486723070-32548-1-git-send-email-plagnioj@jcrosoft.com>

as efi is not an arch but a boot mode from where barebox is started

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/efi/Kconfig                                        | 1 +
 arch/efi/efi/Makefile                                   | 1 -
 drivers/clocksource/Kconfig                             | 4 ++++
 drivers/clocksource/Makefile                            | 1 +
 arch/efi/efi/clocksource.c => drivers/clocksource/efi.c | 0
 5 files changed, 6 insertions(+), 1 deletion(-)
 rename arch/efi/efi/clocksource.c => drivers/clocksource/efi.c (100%)

diff --git a/arch/efi/Kconfig b/arch/efi/Kconfig
index d8d0592e5..01301c04f 100644
--- a/arch/efi/Kconfig
+++ b/arch/efi/Kconfig
@@ -7,6 +7,7 @@ config ARCH_EFI
 	select EFI_DEVICEPATH
 	select PRINTF_UUID
 	select GENERIC_FIND_NEXT_BIT
+	select CLOCKSOURCE_EFI
 
 config ARCH_TEXT_BASE
 	hex
diff --git a/arch/efi/efi/Makefile b/arch/efi/efi/Makefile
index f088c7a94..51db60b88 100644
--- a/arch/efi/efi/Makefile
+++ b/arch/efi/efi/Makefile
@@ -1,4 +1,3 @@
-obj-y += clocksource.o
 obj-y += efi.o
 obj-y += efi-device.o
 obj-y += efi-image.o
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f1ab554f9..ae1f10eae 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -34,6 +34,10 @@ config CLOCKSOURCE_DUMMY_RATE
 	  The option CONFIG_CLOCKSOURCE_DUMMY_RATE is used to adjust this clocksource.
 	  The bigger rate valuest makes clocksource "faster".
 
+config CLOCKSOURCE_EFI
+	bool
+	depends on ARCH_EFI
+
 config CLOCKSOURCE_MVEBU
 	bool
 	depends on ARCH_MVEBU
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 39982ffb2..e83fdeeec 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
 obj-$(CONFIG_CLOCKSOURCE_BCM283X) += bcm2835.o
 obj-$(CONFIG_CLOCKSOURCE_CLPS711X) += clps711x.o
 obj-$(CONFIG_CLOCKSOURCE_DIGIC)   += digic.o
+obj-$(CONFIG_CLOCKSOURCE_EFI) += efi.o
 obj-$(CONFIG_CLOCKSOURCE_MVEBU)   += mvebu.o
 obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
 obj-$(CONFIG_CLOCKSOURCE_ORION)   += orion.o
diff --git a/arch/efi/efi/clocksource.c b/drivers/clocksource/efi.c
similarity index 100%
rename from arch/efi/efi/clocksource.c
rename to drivers/clocksource/efi.c
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-02-10 10:32 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-10  9:56 [PATCH 0/9] EFI: drop arch efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37 ` [PATCH 1/9] efi: move block io driver to driver/block Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2017-02-10 10:37   ` [PATCH 3/9] efi: move bus driver to driver/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 4/9] efi: move debug_ll.h to include/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 5/9] efi: move startup and payload to common/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 6/9] x86: move bios bootup code to arch/x86/bios Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 7/9] efi: move x86 efi boot support to x86 arch Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 8/9] ARCH: efi: Finally drop it as now we can build efi bootup from x86 Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 9/9] efi: bus: add firmware vendor and resision and tables info Jean-Christophe PLAGNIOL-VILLARD
2017-02-14  7:39 ` [PATCH 0/9] EFI: drop arch efi Sascha Hauer
2017-02-15 13:04 ` Sascha Hauer
2017-02-15 19:27   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486723070-32548-2-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox