From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 7/8] efi: clocksoure: use event for timer
Date: Mon, 27 Feb 2017 11:19:29 +0100 [thread overview]
Message-ID: <1488190770-4034-7-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1488190770-4034-1-git-send-email-plagnioj@jcrosoft.com>
with this we can be hw generic
If the EFI implement timestamp protocol we could use instead of event
but even EDK2 Never Ever compile it for any target.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
common/efi/efi.c | 8 ++++
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/efi.c | 110 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 123 insertions(+)
create mode 100644 drivers/clocksource/efi.c
diff --git a/common/efi/efi.c b/common/efi/efi.c
index 4b589b600..05c58250f 100644
--- a/common/efi/efi.c
+++ b/common/efi/efi.c
@@ -353,6 +353,14 @@ efi_status_t efi_main(efi_handle_t image, efi_system_table_t *sys_table)
return EFI_SUCCESS;
}
+static int efi_core_init(void)
+{
+ struct device_d *dev = device_alloc("efi-cs", DEVICE_ID_SINGLE);
+
+ return platform_device_register(dev);
+}
+core_initcall(efi_core_init);
+
static int efi_postcore_init(void)
{
char *uuid;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 9b7f0a9d7..b12a85403 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -34,6 +34,10 @@ config CLOCKSOURCE_DUMMY_RATE
The option CONFIG_CLOCKSOURCE_DUMMY_RATE is used to adjust this clocksource.
The bigger rate valuest makes clocksource "faster".
+config CLOCKSOURCE_EFI
+ bool "Generic EFI Driver"
+ depends on EFI_BOOTUP
+
config CLOCKSOURCE_EFI_X86
bool "EFI X86 HW driver"
depends on EFI_BOOTUP && X86
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 1fd18296e..f69b33d0b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
obj-$(CONFIG_CLOCKSOURCE_BCM283X) += bcm2835.o
obj-$(CONFIG_CLOCKSOURCE_CLPS711X) += clps711x.o
obj-$(CONFIG_CLOCKSOURCE_DIGIC) += digic.o
+obj-$(CONFIG_CLOCKSOURCE_EFI) += efi.o
obj-$(CONFIG_CLOCKSOURCE_EFI_X86) += efi_x86.o
obj-$(CONFIG_CLOCKSOURCE_MVEBU) += mvebu.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
diff --git a/drivers/clocksource/efi.c b/drivers/clocksource/efi.c
new file mode 100644
index 000000000..df65dd86c
--- /dev/null
+++ b/drivers/clocksource/efi.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPL v2
+ */
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <clock.h>
+#include <efi.h>
+#include <efi/efi.h>
+#include <efi/efi-device.h>
+#include <linux/err.h>
+
+static uint64_t ticks = 1;
+static void *efi_cs_evt;
+
+static uint64_t efi_cs_read(void)
+{
+ return ticks;
+}
+
+static void efi_cs_inc(void *event, void *ctx)
+{
+ ticks++;
+}
+
+/* count ticks during a 1dms */
+static uint64_t ticks_freq(void)
+{
+ uint64_t ticks_start, ticks_end;
+
+ ticks_start = ticks;
+ BS->stall(1000);
+ ticks_end = ticks;
+
+ return (ticks_end - ticks_start) * 1000;
+}
+
+/* count ticks during a 20ms delay as on qemu x86_64 the max is 100Hz */
+static uint64_t ticks_freq_x86(void)
+{
+ uint64_t ticks_start, ticks_end;
+
+ ticks_start = ticks;
+ BS->stall(20 * 1000);
+ ticks_end = ticks;
+
+ return (ticks_end - ticks_start) * 50;
+}
+
+static int efi_cs_init(struct clocksource *cs)
+{
+ efi_status_t efiret;
+ uint64_t freq;
+
+ efiret = BS->create_event(EFI_EVT_TIMER | EFI_EVT_NOTIFY_SIGNAL,
+ EFI_TPL_CALLBACK, efi_cs_inc, NULL, &efi_cs_evt);
+
+ if (EFI_ERROR(efiret))
+ return -efi_errno(efiret);
+
+ efiret = BS->set_timer(efi_cs_evt, EFI_TIMER_PERIODIC, 10);
+ if (EFI_ERROR(efiret)) {
+ BS->close_event(efi_cs_evt);
+ return -efi_errno(efiret);
+ }
+
+ freq = 1000 * 1000;
+ if (ticks_freq() < 800 * 1000) {
+ uint64_t nb_100ns;
+
+ freq = ticks_freq_x86();
+ nb_100ns = 10 * 1000 * 1000 / freq;
+ pr_warn("EFI Event timer too slow freq = %llu Hz\n", freq);
+ efiret = BS->set_timer(efi_cs_evt, EFI_TIMER_PERIODIC, nb_100ns);
+ if (EFI_ERROR(efiret)) {
+ BS->close_event(efi_cs_evt);
+ return -efi_errno(efiret);
+ }
+ }
+
+ cs->mult = clocksource_hz2mult(freq, cs->shift);
+
+ return 0;
+}
+
+static struct clocksource efi_cs = {
+ .read = efi_cs_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .shift = 0,
+ .init = efi_cs_init,
+};
+
+static int efi_cs_probe(struct device_d *dev)
+{
+ return init_clock(&efi_cs);
+}
+
+static struct driver_d efi_cs_driver = {
+ .name = "efi-cs",
+ .probe = efi_cs_probe,
+};
+
+static int efi_cs_initcall(void)
+{
+ return platform_driver_register(&efi_cs_driver);
+}
+/* for efi the time must be init at core initcall level */
+late_initcall(efi_cs_initcall);
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-02-27 10:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-27 10:14 [PATCH 0/8] add generic EFI timer Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` [PATCH 1/8] efi: add prototype and definition for creating and closing event Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` [PATCH 2/8] efi: add prototype and definition for setting timer Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` [PATCH 3/8] efi: move LoaderTimeInitUSec and LoaderDevicePartUUID to postcore initcall Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` [PATCH 4/8] efi: move x86 clocksource init at core initcall level Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` [PATCH 5/8] clocksource: allow to have multiple device from clock source Jean-Christophe PLAGNIOL-VILLARD
2017-02-28 7:09 ` Sascha Hauer
2017-03-01 15:52 ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-02 7:36 ` Sascha Hauer
2017-02-27 10:19 ` [PATCH 6/8] efi: move x86 clocksource to device/driver Jean-Christophe PLAGNIOL-VILLARD
2017-02-27 10:19 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2017-03-13 10:30 ` [PATCH 7/8] efi: clocksoure: use event for timer Michael Olbrich
2017-03-13 10:52 ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-13 13:16 ` [PATCH] fixup! efi: clocksoure: add EFI event timer Michael Olbrich
2017-03-13 15:55 ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-14 7:16 ` Sascha Hauer
2017-02-27 10:19 ` [PATCH 8/8] efi: add veriable to report secure boot support and status Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488190770-4034-7-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox