[PATCH 2/2] efi: add serial driver support

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

So now we can stop to use the efi-stdio as this driver
print on the Framebuffer and the serial at the same time.

This is specially usefull if we want to use the framebuffer via efi-gop for
something else.

Do not forget to disable the efi-stdio device before enabling the console
otherwise you will get double printing.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/serial/Kconfig      |   4 +
 drivers/serial/Makefile     |   1 +
 drivers/serial/serial_efi.c | 241 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 246 insertions(+)
 create mode 100644 drivers/serial/serial_efi.c

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ced30530a..cfddc2ee9 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -21,6 +21,10 @@ config DRIVER_SERIAL_AR933X
 	  If you have an Atheros AR933X SOC based board and want to use the
 	  built-in UART of the SoC, say Y to this option.
 
+config DRIVER_SERIAL_EFI
+	bool "EFI serial"
+	depends on EFI_BOOTUP
+
 config DRIVER_SERIAL_IMX
 	depends on ARCH_IMX
 	default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7d1bae195..3d9f735ed 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_DRIVER_SERIAL_ARM_DCC)		+= arm_dcc.o
 obj-$(CONFIG_SERIAL_AMBA_PL011)			+= amba-pl011.o
 obj-$(CONFIG_DRIVER_SERIAL_AR933X)		+= serial_ar933x.o
+obj-$(CONFIG_DRIVER_SERIAL_EFI)			+= serial_efi.o
 obj-$(CONFIG_DRIVER_SERIAL_IMX)			+= serial_imx.o
 obj-$(CONFIG_DRIVER_SERIAL_STM378X)		+= stm-serial.o
 obj-$(CONFIG_DRIVER_SERIAL_ATMEL)		+= atmel.o
diff --git a/drivers/serial/serial_efi.c b/drivers/serial/serial_efi.c
new file mode 100644
index 000000000..35387bfd5
--- /dev/null
+++ b/drivers/serial/serial_efi.c
@@ -0,0 +1,241 @@
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <efi.h>
+#include <efi/efi.h>
+#include <efi/efi-device.h>
+
+//
+// define for Control bits, grouped by read only, write only, and read write
+//
+//
+// Read Only
+//
+#define EFI_SERIAL_CLEAR_TO_SEND        0x00000010
+#define EFI_SERIAL_DATA_SET_READY       0x00000020
+#define EFI_SERIAL_RING_INDICATE        0x00000040
+#define EFI_SERIAL_CARRIER_DETECT       0x00000080
+#define EFI_SERIAL_INPUT_BUFFER_EMPTY   0x00000100
+#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY  0x00000200
+
+//
+// Write Only
+//
+#define EFI_SERIAL_REQUEST_TO_SEND      0x00000002
+#define EFI_SERIAL_DATA_TERMINAL_READY  0x00000001
+
+//
+// Read Write
+//
+#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE     0x00001000
+#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE     0x00002000
+#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE 0x00004000
+
+typedef enum {
+	DefaultParity,
+	NoParity,
+	EvenParity,
+	OddParity,
+	MarkParity,
+	SpaceParity
+} efi_parity_type;
+
+typedef enum {
+	DefaultStopBits,
+	OneStopBit,
+	OneFiveStopBits,
+	TwoStopBits
+} efi_stop_bits_type;
+
+struct efi_serial_io_mode {
+	uint32_t controlmask;
+	uint32_t timeout;
+	uint64_t baudrate;
+	uint32_t receivefifodepth;
+	uint32_t databits;
+	uint32_t parity;
+	uint32_t stopbits;
+};
+
+struct efi_serial_io_protocol {
+	uint32_t revision;
+
+	efi_status_t (EFIAPI *reset) (struct efi_serial_io_protocol *This);
+	efi_status_t (EFIAPI *set_attributes) (struct efi_serial_io_protocol *This,
+			uint64_t baudrate, uint32_t receivefifodepth,
+			uint32_t timeout, efi_parity_type parity,
+			uint8_t databits, efi_stop_bits_type stopbits);
+	efi_status_t (EFIAPI *setcontrol) (struct efi_serial_io_protocol *This,
+			uint32_t control);
+	efi_status_t (EFIAPI *getcontrol) (struct efi_serial_io_protocol *This,
+			uint32_t *control);
+	efi_status_t (EFIAPI *write) (struct efi_serial_io_protocol *This,
+			unsigned long *buffersize, void *buffer);
+	efi_status_t (EFIAPI *read) (struct efi_serial_io_protocol *This,
+			unsigned long *buffersize, void *buffer);
+
+	struct efi_serial_io_mode *mode;
+};
+
+/*
+ * We wrap our port structure around the generic console_device.
+ */
+struct efi_serial_port {
+	struct efi_serial_io_protocol *serial;
+	struct console_device	uart;		/* uart */
+	struct efi_device *efidev;
+};
+
+static inline struct efi_serial_port *
+to_efi_serial_port(struct console_device *uart)
+{
+	return container_of(uart, struct efi_serial_port, uart);
+}
+
+static int efi_serial_setbaudrate(struct console_device *cdev, int baudrate)
+{
+	struct efi_serial_port *uart = to_efi_serial_port(cdev);
+	struct efi_serial_io_protocol *serial = uart->serial;
+	efi_status_t efiret;
+
+	efiret = serial->set_attributes(serial, baudrate, 0, 0, NoParity, 8,
+					OneStopBit);
+	if (EFI_ERROR(efiret))
+		return -efi_errno(efiret);
+
+	return 0;
+}
+
+static void efi_serial_putc(struct console_device *cdev, char c)
+{
+	struct efi_serial_port *uart = to_efi_serial_port(cdev);
+	struct efi_serial_io_protocol *serial = uart->serial;
+	uint32_t control;
+	efi_status_t efiret;
+	unsigned long buffersize = sizeof(char);
+
+	do {
+		efiret = serial->getcontrol(serial, &control);
+		if (EFI_ERROR(efiret))
+			return;
+
+	} while(!(control & EFI_SERIAL_CLEAR_TO_SEND));
+
+	serial->write(serial, &buffersize, &c);
+}
+
+static int efi_serial_puts(struct console_device *cdev, const char *s)
+{
+	struct efi_serial_port *uart = to_efi_serial_port(cdev);
+	struct efi_serial_io_protocol *serial = uart->serial;
+	uint32_t control;
+	efi_status_t efiret;
+	unsigned long buffersize = strlen(s) * sizeof(char);
+
+	do {
+		efiret = serial->getcontrol(serial, &control);
+		if (EFI_ERROR(efiret))
+			return 0;
+
+	} while(!(control & EFI_SERIAL_CLEAR_TO_SEND));
+
+	serial->write(serial, &buffersize, (void*)s);
+
+	return strlen(s);
+}
+
+static int efi_serial_getc(struct console_device *cdev)
+{
+	struct efi_serial_port *uart = to_efi_serial_port(cdev);
+	struct efi_serial_io_protocol *serial = uart->serial;
+	uint32_t control;
+	efi_status_t efiret;
+	unsigned long buffersize = sizeof(char);
+	char c;
+
+	do {
+		efiret = serial->getcontrol(serial, &control);
+		if (EFI_ERROR(efiret))
+			return (int)-1;
+
+	} while(!(control & EFI_SERIAL_DATA_SET_READY));
+
+	serial->read(serial, &buffersize, &c);
+
+	return (int)c;
+}
+
+static int efi_serial_tstc(struct console_device *cdev)
+{
+	struct efi_serial_port *uart = to_efi_serial_port(cdev);
+	struct efi_serial_io_protocol *serial = uart->serial;
+	uint32_t control;
+	efi_status_t efiret;
+
+	efiret = serial->getcontrol(serial, &control);
+	if (EFI_ERROR(efiret))
+		return 0;
+
+	return !(control & EFI_SERIAL_INPUT_BUFFER_EMPTY);
+}
+
+static int efi_serial_probe(struct efi_device *efidev)
+{
+	struct efi_serial_port *uart;
+	struct console_device *cdev;
+
+	uart = xzalloc(sizeof(struct efi_serial_port));
+
+	cdev = &uart->uart;
+	cdev->dev = &efidev->dev;
+	cdev->tstc = efi_serial_tstc;
+	cdev->putc = efi_serial_putc;
+	cdev->puts = efi_serial_puts;
+	cdev->getc = efi_serial_getc;
+	cdev->setbrg = efi_serial_setbaudrate;
+
+	uart->serial = efidev->protocol;
+
+	uart->serial->reset(uart->serial);
+
+	/* Enable UART */
+
+	console_register(cdev);
+
+	return 0;
+}
+
+static struct efi_driver efi_serial_driver = {
+        .driver = {
+		.name  = "efi-serial",
+	},
+        .probe = efi_serial_probe,
+	.guid = EFI_SERIAL_IO_PROTOCOL_GUID,
+};
+device_efi_driver(efi_serial_driver);
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox