From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from vs81.iboxed.net ([185.82.85.146]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dJ2P1-0000kq-Vc for barebox@lists.infradead.org; Thu, 08 Jun 2017 18:43:31 +0000 From: Alexander Kurz Date: Thu, 8 Jun 2017 20:41:37 +0200 Message-Id: <1496947297-23502-4-git-send-email-akurz@blala.de> In-Reply-To: <1496947297-23502-1-git-send-email-akurz@blala.de> References: <1496947297-23502-1-git-send-email-akurz@blala.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 4/4] ARM: i.MX6 Wandboard: add Documentation To: barebox@lists.infradead.org Cc: Alexander Kurz Signed-off-by: Alexander Kurz --- Documentation/boards/imx/Wandboard.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/boards/imx/Wandboard.rst diff --git a/Documentation/boards/imx/Wandboard.rst b/Documentation/boards/imx/Wandboard.rst new file mode 100644 index 0000000..574318a --- /dev/null +++ b/Documentation/boards/imx/Wandboard.rst @@ -0,0 +1,21 @@ +Wandboard +========= + +The Wandboard is a carrier board available with three different +System-on-Module options, the Wandboard Solo (i.MX6S, 512MiB DDR3), +the Wandboard Dual (i.MX6DL, 1GiB DDR3) and Wandboard Quad (i.MX6Q, 2GiB DDR3). + +The device boots from the SD card slot on the System-on-Module board, it +will not boot from the slot on the carrier board. + +To boot barebox on any wandboard, build imx_v7_defconfig +and copy the barebox imx-image to the i.MX boot location of a SD card, e.g. +dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0 + +Only one image exists, supporting all three Wandboard variants, barebox will +detect the Wandboard variant depending on the SoC variant. +This image is only usable for SD-boot. It will not boot via imx-usb-loader. + +Connect to the serial port using a null-modem cable to get console access. + +For further documentation, including board schematics see http://wandboard.org/ -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox