Re: [PATCH 2/2] i.MX: HABv4: always print HAB status at boot time

[Denis OSTERLAND <denis.osterland@diehl.com>]

Am Sonntag, den 25.11.2018, 23:59 +0100 schrieb Roland Hieber:
> Currently, board code needs to call habv4_get_status() explicitely, but
> there is no reason that it cannot be called automatically at startup
> when HABv4 is enabled. This way the call cannot be forgotten and we can
> make sure to report all potentially occuring HAB warnings and errors.
Looks like the easier way, than trying to get this to work as a command.
I hope I found some time to test it.

Regards Denis

> 
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
>  drivers/hab/habv3.c |  4 ++++
>  drivers/hab/habv4.c | 41 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
> 
> diff --git a/drivers/hab/habv3.c b/drivers/hab/habv3.c
> index 82ae245f8a..c190c78d40 100644
> --- a/drivers/hab/habv3.c
> +++ b/drivers/hab/habv3.c
> @@ -78,5 +78,9 @@ int imx_habv3_get_status(uint32_t status)
>  
>  int imx25_hab_get_status(void)
>  {
> +	if (!cpu_is_mx25()) {
> +		return 0;
> +	}
>  	return imx_habv3_get_status(readl(IOMEM(0x780018d4)));
>  }
> +postmmu_initcall(imx25_hab_get_status);
> diff --git a/drivers/hab/habv4.c b/drivers/hab/habv4.c
> index e64f34870e..09f598631b 100644
> --- a/drivers/hab/habv4.c
> +++ b/drivers/hab/habv4.c
> @@ -20,6 +20,7 @@
>  
>  #include <common.h>
>  #include <hab.h>
> +#include <init.h>
>  #include <types.h>
>  
>  #include <mach/generic.h>
> @@ -500,9 +501,49 @@ int imx6_hab_get_status(void)
>  	return -EINVAL;
>  }
>  
> +static int init_imx6_hab_get_status(void)
> +{
> +	int ret = 0;
> +
> +	if (!cpu_is_mx6())
> +		/* can happen in multi-image builds and is not an error */
> +		return 0;
> +
> +	ret = imx6_hab_get_status();
> +
> +	/* nobody will check the return value if there were HAB errors, but the
> +	 * initcall will fail spectaculously with a strange error message. */
> +	if (ret == -EPERM)
> +		return 0;
> +	return ret;
> +}
> +/* need to run before MMU setup because i.MX6 ROM code is mapped near 0x0,
> + * which will no longer be accessible when the MMU sets the zero page to
> + * faulting. */
> +postconsole_initcall(init_imx6_hab_get_status);
> +
>  int imx28_hab_get_status(void)
>  {
>  	const struct habv4_rvt *rvt = (void *)HABV4_RVT_IMX28;
>  
>  	return habv4_get_status(rvt);
>  }
> +
> +static int init_imx28_hab_get_status(void)
> +{
> +	int ret = 0;
> +
> +	if (!cpu_is_mx28())
> +		/* can happen in multi-image builds and is not an error */
> +		return 0;
> +
> +	ret = imx28_hab_get_status();
> +
> +	/* nobody will check the return value if there were HAB errors, but the
> +	 * initcall will fail spectaculously with a strange error message. */
> +	if (ret == -EPERM)
> +		return 0;
> +	return ret;
> +}
> +/* i.MX28 ROM code can be run after MMU setup to make use of caching */
> +postmmu_initcall(init_imx28_hab_get_status);

Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________

Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited. 
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox