From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mo6-p00-ob.smtp.rzone.de ([2a01:238:20a:202:5300::2]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gS1E2-0001pr-94 for barebox@lists.infradead.org; Wed, 28 Nov 2018 14:54:05 +0000 Received: from odin.home.erwinrol.com by smtp.strato.de (RZmta 44.6 DYNA|AUTH) with ESMTPSA id L03290uASErk6zU (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (curve secp521r1 with 521 ECDH bits, eq. 15360 bits RSA)) (Client did not present a certificate) for ; Wed, 28 Nov 2018 15:53:46 +0100 (CET) Message-ID: <1543416825.5085.11.camel@erwinrol.com> From: Erwin Rol Date: Wed, 28 Nov 2018 15:53:45 +0100 Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: imx6ul (phytec Segin board) USB/DFU To: Barebox List Hallo All, I am trying to get USB device (DFU) to work on my Phytec Segin board (imx6ul SOC). I can upload barebox with imx-usb-loader and it starts fine (so USB hardware is working) Than when barebox runs I want to put that same USB port in DFU mode and update the nand flash (barebox, env, kernel, rootfs) via DFU. But I can't get it to work, I assume USB device mode setup is missing from the board setup, but I can't really find info on how to add it. Any hints are very welcome. - Erwin _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox