[PATCH v2] firmware-zynqmp: port from linux

["Thomas Hämmerle" <Thomas.Haemmerle@wolfvision.net>]

From: Thomas Haemmerle <thomas.haemmerle@wolfvision.net>

Port Xilinx Zynq MPSoC Firmware layer driver from linux.

Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net>
---
 arch/arm/Kconfig                                   |   1 +
 arch/arm/mach-zynqmp/Makefile                      |   2 +-
 arch/arm/mach-zynqmp/firmware-zynqmp.c             | 601 +++++++++++++++++++++
 .../arm/mach-zynqmp/include/mach/firmware-zynqmp.h |  66 +++
 4 files changed, 669 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-zynqmp/firmware-zynqmp.c
 create mode 100644 arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f5c1471..9d3f5b2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -250,6 +250,7 @@ config ARCH_ZYNQMP
 	select CPU_V8
 	select HAS_DEBUG_LL
 	select HAVE_PBL_MULTI_IMAGES
+	select ARM_SMCCC
 	select COMMON_CLK
 	select COMMON_CLK_OF_PROVIDER
 	select CLKDEV_LOOKUP
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index c601374..021efc9 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
-obj- := __dummy__.o
+obj-y += firmware-zynqmp.o
diff --git a/arch/arm/mach-zynqmp/firmware-zynqmp.c b/arch/arm/mach-zynqmp/firmware-zynqmp.c
new file mode 100644
index 0000000..a3ee992
--- /dev/null
+++ b/arch/arm/mach-zynqmp/firmware-zynqmp.c
@@ -0,0 +1,601 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (c) 2018 Thomas Haemmerle <thomas.haemmerle@wolfvision.net>
+ *
+ * based on Linux xlnx-zynqmp
+ *
+ *  Michal Simek <michal.simek@xilinx.com>
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/arm-smccc.h>
+
+#include <mach/firmware-zynqmp.h>
+
+#define ZYNQMP_PM_VERSION_MAJOR	1
+#define ZYNQMP_PM_VERSION_MINOR	0
+
+#define ZYNQMP_PM_VERSION	((ZYNQMP_PM_VERSION_MAJOR << 16) | \
+					ZYNQMP_PM_VERSION_MINOR)
+
+#define ZYNQMP_TZ_VERSION_MAJOR 1
+#define ZYNQMP_TZ_VERSION_MINOR 0
+
+#define ZYNQMP_TZ_VERSION	((ZYNQMP_TZ_VERSION_MAJOR << 16) | \
+				ZYNQMP_TZ_VERSION_MINOR)
+
+#define PAYLOAD_ARG_CNT         4
+
+/* SMC SIP service Call Function Identifier Prefix */
+#define PM_SIP_SVC		0xC2000000
+
+enum pm_ret_status {
+	XST_PM_SUCCESS = 0,
+	XST_PM_INTERNAL = 2000,
+	XST_PM_CONFLICT,
+	XST_PM_NO_ACCESS,
+	XST_PM_INVALID_NODE,
+	XST_PM_DOUBLE_REQ,
+	XST_PM_ABORT_SUSPEND,
+};
+
+enum pm_api_id {
+	PM_GET_API_VERSION = 1,
+	PM_FPGA_LOAD = 22,
+	PM_FPGA_GET_STATUS,
+	PM_IOCTL = 34,
+	PM_QUERY_DATA,
+	PM_CLOCK_ENABLE,
+	PM_CLOCK_DISABLE,
+	PM_CLOCK_GETSTATE,
+	PM_CLOCK_SETDIVIDER,
+	PM_CLOCK_GETDIVIDER,
+	PM_CLOCK_SETRATE,
+	PM_CLOCK_GETRATE,
+	PM_CLOCK_SETPARENT,
+	PM_CLOCK_GETPARENT,
+	PM_EFUSE_ACCESS = 53,
+	PM_GET_TRUSTZONE_VERSION = 0xA03,
+};
+
+/**
+ * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
+ * @ret_status:		PMUFW return code
+ *
+ * Return: corresponding Linux error code
+ */
+static int zynqmp_pm_ret_code(u32 ret_status)
+{
+	switch (ret_status) {
+	case XST_PM_SUCCESS:
+	case XST_PM_DOUBLE_REQ:
+		return 0;
+	case XST_PM_NO_ACCESS:
+		return -EACCES;
+	case XST_PM_ABORT_SUSPEND:
+		return -ECANCELED;
+	case XST_PM_INTERNAL:
+	case XST_PM_CONFLICT:
+	case XST_PM_INVALID_NODE:
+	default:
+		return -EINVAL;
+	}
+}
+
+static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
+				    u32 *ret_payload)
+{
+	return -ENODEV;
+}
+
+/*
+ * PM function call wrapper
+ * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
+ */
+static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
+
+/**
+ * do_fw_call_smc() - Call system-level platform management layer (SMC)
+ * @arg0:		Argument 0 to SMC call
+ * @arg1:		Argument 1 to SMC call
+ * @arg2:		Argument 2 to SMC call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function via SMC call (no hypervisor present).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
+				   u32 *ret_payload)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+	if (ret_payload) {
+		ret_payload[0] = lower_32_bits(res.a0);
+		ret_payload[1] = upper_32_bits(res.a0);
+		ret_payload[2] = lower_32_bits(res.a1);
+		ret_payload[3] = upper_32_bits(res.a1);
+	}
+
+	return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * do_fw_call_hvc() - Call system-level platform management layer (HVC)
+ * @arg0:		Argument 0 to HVC call
+ * @arg1:		Argument 1 to HVC call
+ * @arg2:		Argument 2 to HVC call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function via HVC
+ * HVC-based for communication through hypervisor
+ * (no direct communication with ATF).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
+				   u32 *ret_payload)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+	if (ret_payload) {
+		ret_payload[0] = lower_32_bits(res.a0);
+		ret_payload[1] = upper_32_bits(res.a0);
+		ret_payload[2] = lower_32_bits(res.a1);
+		ret_payload[3] = upper_32_bits(res.a1);
+	}
+
+	return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
+ *			   caller function depending on the configuration
+ * @pm_api_id:		Requested PM-API call
+ * @arg0:		Argument 0 to requested PM-API call
+ * @arg1:		Argument 1 to requested PM-API call
+ * @arg2:		Argument 2 to requested PM-API call
+ * @arg3:		Argument 3 to requested PM-API call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function for SMC or HVC call, depending on
+ * configuration.
+ * Following SMC Calling Convention (SMCCC) for SMC64:
+ * Pm Function Identifier,
+ * PM_SIP_SVC + PM_API_ID =
+ *	((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
+ *	((SMC_64) << FUNCID_CC_SHIFT)
+ *	((SIP_START) << FUNCID_OEN_SHIFT)
+ *	((PM_API_ID) & FUNCID_NUM_MASK))
+ *
+ * PM_SIP_SVC	- Registered ZynqMP SIP Service Call.
+ * PM_API_ID	- Platform Management API ID.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload)
+{
+	/*
+	 * Added SIP service call Function Identifier
+	 * Make sure to stay in x0 register
+	 */
+	u64 smc_arg[4];
+
+	smc_arg[0] = PM_SIP_SVC | pm_api_id;
+	smc_arg[1] = ((u64)arg1 << 32) | arg0;
+	smc_arg[2] = ((u64)arg3 << 32) | arg2;
+
+	return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
+}
+
+static u32 pm_api_version;
+static u32 pm_tz_version;
+
+/**
+ * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
+ * @version:	Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_api_version(u32 *version)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!version)
+		return -EINVAL;
+
+	/* Check is PM API version already verified */
+	if (pm_api_version > 0) {
+		*version = pm_api_version;
+		return 0;
+	}
+	ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
+	*version = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
+ * @version:	Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_trustzone_version(u32 *version)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!version)
+		return -EINVAL;
+
+	/* Check is PM trustzone version already verified */
+	if (pm_tz_version > 0) {
+		*version = pm_tz_version;
+		return 0;
+	}
+	ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
+				  0, 0, ret_payload);
+	*version = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * get_set_conduit_method() - Choose SMC or HVC based communication
+ * @np:		Pointer to the device_node structure
+ *
+ * Use SMC or HVC-based functions to communicate with EL2/EL3.
+ *
+ * Return: Returns 0 on success or error code
+ */
+static int get_set_conduit_method(struct device_node *np)
+{
+	const char *method;
+
+	if (of_property_read_string(np, "method", &method)) {
+		pr_warn("%s missing \"method\" property\n", __func__);
+		return -ENXIO;
+	}
+
+	if (!strcmp("hvc", method)) {
+		do_fw_call = do_fw_call_hvc;
+	} else if (!strcmp("smc", method)) {
+		do_fw_call = do_fw_call_smc;
+	} else {
+		pr_warn("%s Invalid \"method\" property: %s\n",
+			__func__, method);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * zynqmp_pm_query_data() - Get query data from firmware
+ * @qdata:	Variable to the zynqmp_pm_query_data structure
+ * @out:	Returned output value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
+{
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
+				  qdata.arg2, qdata.arg3, out);
+
+	/*
+	 * For clock name query, all bytes in SMC response are clock name
+	 * characters and return code is always success. For invalid clocks,
+	 * clock name bytes would be zeros.
+	 */
+	return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
+}
+
+/**
+ * zynqmp_pm_clock_enable() - Enable the clock for given id
+ * @clock_id:	ID of the clock to be enabled
+ *
+ * This function is used by master to enable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_enable(u32 clock_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_disable() - Disable the clock for given id
+ * @clock_id:	ID of the clock to be disable
+ *
+ * This function is used by master to disable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_disable(u32 clock_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getstate() - Get the clock state for given id
+ * @clock_id:	ID of the clock to be queried
+ * @state:	1/0 (Enabled/Disabled)
+ *
+ * This function is used by master to get the state of clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
+				  0, 0, ret_payload);
+	*state = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setdivider() - Set the clock divider for given id
+ * @clock_id:	ID of the clock
+ * @divider:	divider value
+ *
+ * This function is used by master to set divider for any clock
+ * to achieve desired rate.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
+				   0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getdivider() - Get the clock divider for given id
+ * @clock_id:	ID of the clock
+ * @divider:	divider value
+ *
+ * This function is used by master to get divider values
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
+				  0, 0, ret_payload);
+	*divider = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setrate() - Set the clock rate for given id
+ * @clock_id:	ID of the clock
+ * @rate:	rate value in hz
+ *
+ * This function is used by master to set rate for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
+				   lower_32_bits(rate),
+				   upper_32_bits(rate),
+				   0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getrate() - Get the clock rate for given id
+ * @clock_id:	ID of the clock
+ * @rate:	rate value in hz
+ *
+ * This function is used by master to get rate
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
+				  0, 0, ret_payload);
+	*rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setparent() - Set the clock parent for given id
+ * @clock_id:	ID of the clock
+ * @parent_id:	parent id
+ *
+ * This function is used by master to set parent for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
+				   parent_id, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getparent() - Get the clock parent for given id
+ * @clock_id:	ID of the clock
+ * @parent_id:	parent id
+ *
+ * This function is used by master to get parent index
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
+				  0, 0, ret_payload);
+	*parent_id = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * zynqmp_is_valid_ioctl() - Check whether IOCTL ID is valid or not
+ * @ioctl_id:	IOCTL ID
+ *
+ * Return: 1 if IOCTL is valid else 0
+ */
+static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
+{
+	switch (ioctl_id) {
+	case IOCTL_SET_PLL_FRAC_MODE:
+	case IOCTL_GET_PLL_FRAC_MODE:
+	case IOCTL_SET_PLL_FRAC_DATA:
+	case IOCTL_GET_PLL_FRAC_DATA:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+/**
+ * zynqmp_pm_ioctl() - PM IOCTL API for device control and configs
+ * @node_id:	Node ID of the device
+ * @ioctl_id:	ID of the requested IOCTL
+ * @arg1:	Argument 1 to requested IOCTL call
+ * @arg2:	Argument 2 to requested IOCTL call
+ * @out:	Returned output value
+ *
+ * This function calls IOCTL to firmware for device control and configuration.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2,
+			   u32 *out)
+{
+	if (!zynqmp_is_valid_ioctl(ioctl_id))
+		return -EINVAL;
+
+	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, ioctl_id,
+				   arg1, arg2, out);
+}
+
+static const struct zynqmp_eemi_ops eemi_ops = {
+	.get_api_version = zynqmp_pm_get_api_version,
+	.query_data = zynqmp_pm_query_data,
+	.clock_enable = zynqmp_pm_clock_enable,
+	.clock_disable = zynqmp_pm_clock_disable,
+	.clock_getstate = zynqmp_pm_clock_getstate,
+	.clock_setdivider = zynqmp_pm_clock_setdivider,
+	.clock_getdivider = zynqmp_pm_clock_getdivider,
+	.clock_setrate = zynqmp_pm_clock_setrate,
+	.clock_getrate = zynqmp_pm_clock_getrate,
+	.clock_setparent = zynqmp_pm_clock_setparent,
+	.clock_getparent = zynqmp_pm_clock_getparent,
+	.ioctl = zynqmp_pm_ioctl,
+};
+
+/**
+ * zynqmp_pm_get_eemi_ops - Get eemi ops functions
+ *
+ * Return: Pointer of eemi_ops structure
+ */
+const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
+{
+	return &eemi_ops;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops);
+
+
+static int zynqmp_firmware_probe(struct device_d *dev)
+{
+	int ret;
+
+	ret = get_set_conduit_method(dev->device_node);
+	if (ret)
+		goto out;
+
+	zynqmp_pm_get_api_version(&pm_api_version);
+	if (pm_api_version < ZYNQMP_PM_VERSION) {
+		dev_err(dev, "Platform Management API version error."
+				"Expected: v%d.%d - Found: v%d.%d\n",
+				ZYNQMP_PM_VERSION_MAJOR,
+				ZYNQMP_PM_VERSION_MINOR,
+				pm_api_version >> 16, pm_api_version & 0xFFFF);
+		ret = -EIO;
+		goto out;
+	}
+	dev_dbg(dev, "Platform Management API v%d.%d\n",
+			pm_api_version >> 16, pm_api_version & 0xFFFF);
+
+	ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
+	if (ret) {
+		dev_err(dev, "Legacy trustzone found without version support\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (pm_tz_version < ZYNQMP_TZ_VERSION) {
+		dev_err(dev, "Trustzone version error."
+				"Expected: v%d.%d - Found: v%d.%d\n",
+				ZYNQMP_TZ_VERSION_MAJOR,
+				ZYNQMP_TZ_VERSION_MINOR,
+				pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+		ret = -EIO;
+		goto out;
+	}
+	dev_dbg(dev, "Trustzone version v%d.%d\n",
+			pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+out:
+	if (ret)
+		do_fw_call = do_fw_call_fail;
+	return ret;
+}
+
+static struct of_device_id zynqmp_firmware_id_table[] = {
+	{ .compatible = "xlnx,zynqmp-firmware", },
+	{}
+};
+
+static struct driver_d zynqmp_firmware_driver = {
+	.name = "zynqmp_firmware",
+	.probe = zynqmp_firmware_probe,
+	.of_compatible = DRV_OF_COMPAT(zynqmp_firmware_id_table),
+};
+
+static int zynqmp_firmware_init(void)
+{
+	return platform_driver_register(&zynqmp_firmware_driver);
+}
+core_initcall(zynqmp_firmware_init);
diff --git a/arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h b/arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h
new file mode 100644
index 0000000..7a65f78
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (c) 2018 Thomas Haemmerle <thomas.haemmerle@wolfvision.net>
+ *
+ * based on Linux xlnx-zynqmp
+ *
+ *  Michal Simek <michal.simek@xilinx.com>
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#ifndef FIRMWARE_ZYNQMP_H_
+#define FIRMWARE_ZYNQMP_H_
+
+enum pm_ioctl_id {
+	IOCTL_SET_PLL_FRAC_MODE = 8,
+	IOCTL_GET_PLL_FRAC_MODE,
+	IOCTL_SET_PLL_FRAC_DATA,
+	IOCTL_GET_PLL_FRAC_DATA,
+};
+
+enum pm_query_id {
+	PM_QID_INVALID,
+	PM_QID_CLOCK_GET_NAME,
+	PM_QID_CLOCK_GET_TOPOLOGY,
+	PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
+	PM_QID_CLOCK_GET_PARENTS,
+	PM_QID_CLOCK_GET_ATTRIBUTES,
+	PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
+};
+
+/**
+ * struct zynqmp_pm_query_data - PM query data
+ * @qid:	query ID
+ * @arg1:	Argument 1 of query data
+ * @arg2:	Argument 2 of query data
+ * @arg3:	Argument 3 of query data
+ */
+struct zynqmp_pm_query_data {
+	u32 qid;
+	u32 arg1;
+	u32 arg2;
+	u32 arg3;
+};
+
+struct zynqmp_eemi_ops {
+	int (*get_api_version)(u32 *version);
+	int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+	int (*clock_enable)(u32 clock_id);
+	int (*clock_disable)(u32 clock_id);
+	int (*clock_getstate)(u32 clock_id, u32 *state);
+	int (*clock_setdivider)(u32 clock_id, u32 divider);
+	int (*clock_getdivider)(u32 clock_id, u32 *divider);
+	int (*clock_setrate)(u32 clock_id, u64 rate);
+	int (*clock_getrate)(u32 clock_id, u64 *rate);
+	int (*clock_setparent)(u32 clock_id, u32 parent_id);
+	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
+	int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out);
+};
+
+const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
+
+#endif /* FIRMWARE_ZYNQMP_H_ */
-- 
2.7.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox