mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
Date: Tue, 2 Jul 2019 14:37:38 +0200	[thread overview]
Message-ID: <1562071065-367410-1-git-send-email-s.riedmueller@phytec.de> (raw)

The phyCORE-i.MX 6Solo/DualLight is available with low-cost and
full-featured phyBOARD-Mira. One crucial difference is the supported
max. ethernet speed. On the full-featured Mira it is 1000 MBit/s but on
the low-cost Mira it is only 100 MBit/s. To cover this difference two
different images are necessary for low-cost and full-featured. Thus a
low-cost variant is added for the phyCORE-i.MX 6Solo with NAND and the
phyCORE-i.MX 6 DualLight with eMMC.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 arch/arm/boards/phytec-som-imx6/lowlevel.c         |  2 +
 arch/arm/dts/Makefile                              |  2 +
 arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts    |  2 +-
 arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts | 65 ++++++++++++++++++++++
 arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts | 57 +++++++++++++++++++
 arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts    |  2 +-
 images/Makefile.imx                                | 10 ++++
 7 files changed, 138 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts
 create mode 100644 arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts

diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c
index 915534ea9455..0f8d591b3a71 100644
--- a/arch/arm/boards/phytec-som-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c
@@ -109,8 +109,10 @@ PHYTEC_ENTRY(start_phytec_phyboard_subra_512mb_1bank, imx6dl_phytec_phyboard_sub
 PHYTEC_ENTRY(start_phytec_phyboard_subra_1gib_1bank, imx6q_phytec_phyboard_subra, SZ_1G, false);
 
 PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_nand_256mb, imx6dl_phytec_phycore_som_nand, SZ_256M, true);
+PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_lc_nand_256mb, imx6dl_phytec_phycore_som_lc_nand, SZ_256M, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_nand_1gib, imx6dl_phytec_phycore_som_nand, SZ_1G, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_emmc_1gib, imx6dl_phytec_phycore_som_emmc, SZ_1G, true);
+PHYTEC_ENTRY(start_phytec_phycore_imx6dl_som_lc_emmc_1gib, imx6dl_phytec_phycore_som_lc_emmc, SZ_1G, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_nand_1gib, imx6q_phytec_phycore_som_nand, SZ_1G, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6qp_som_nand_1gib, imx6qp_phytec_phycore_som_nand, SZ_1G, true);
 PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_1gib, imx6q_phytec_phycore_som_emmc, SZ_1G, true);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 561653930b20..2a2d7a55b820 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -63,7 +63,9 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
 				imx6q-phytec-phycore-som-emmc.dtb.o \
 				imx6qp-phytec-phycore-som-nand.dtb.o \
 				imx6dl-phytec-phycore-som-nand.dtb.o \
+				imx6dl-phytec-phycore-som-lc-nand.dtb.o \
 				imx6dl-phytec-phycore-som-emmc.dtb.o \
+				imx6dl-phytec-phycore-som-lc-emmc.dtb.o \
 				imx6ul-phytec-phycore-som.dtb.o \
 				imx6ull-phytec-phycore-som-lc.dtb.o \
 				imx6ull-phytec-phycore-som.dtb.o
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
index e602b77e9940..a04e37f80363 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
@@ -30,7 +30,7 @@
 };
 
 &ethphy {
-	max-speed = <100>;
+	max-speed = <1000>;
 };
 
 &fec {
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts
new file mode 100644
index 000000000000..5d9727ec5b80
--- /dev/null
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-lc-emmc.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH,
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <arm/imx6dl.dtsi>
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 DualLite/SOLO with eMMC low-cost";
+	compatible = "phytec,imx6dl-pcm058-emmc", "fsl,imx6dl";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&eeprom {
+	status = "okay";
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&flash {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "barebox";
+		reg = <0x0 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "barebox-environment";
+		reg = <0xe0000 0x20000>;
+	};
+};
+
+&usdhc4 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts
new file mode 100644
index 000000000000..e119e4c0d4fc
--- /dev/null
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-lc-nand.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH,
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <arm/imx6dl.dtsi>
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 Duallite/SOLO with NAND low-cost";
+	compatible = "phytec,imx6dl-pcm058-nand", "fsl,imx6dl";
+};
+
+&eeprom {
+	status = "okay";
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "barebox";
+		reg = <0x0 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "barebox-environment";
+		reg = <0xe0000 0x20000>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
index 77f143438b50..287d876e41ed 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
@@ -25,7 +25,7 @@
 };
 
 &ethphy {
-	max-speed = <100>;
+	max-speed = <1000>;
 };
 
 &fec {
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 9a7187ac7807..95ed6392e3c6 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -443,11 +443,21 @@ CFG_start_phytec_phycore_imx6dl_som_nand_1gib.pblb.imximg = $(board)/phytec-som-
 FILE_barebox-phytec-phycore-imx6dl-som-nand-1gib.img = start_phytec_phycore_imx6dl_som_nand_1gib.pblb.imximg
 image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6dl-som-nand-1gib.img
 
+pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6dl_som_lc_nand_256mb
+CFG_start_phytec_phycore_imx6dl_som_lc_nand_256mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058dl-256mb.imxcfg
+FILE_barebox-phytec-phycore-imx6dl-som-lc-nand-256mb.img = start_phytec_phycore_imx6dl_som_lc_nand_256mb.pblb.imximg
+image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6dl-som-lc-nand-256mb.img
+
 pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6dl_som_emmc_1gib
 CFG_start_phytec_phycore_imx6dl_som_emmc_1gib.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058dl-1gib.imxcfg
 FILE_barebox-phytec-phycore-imx6dl-som-emmc-1gib.img = start_phytec_phycore_imx6dl_som_emmc_1gib.pblb.imximg
 image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6dl-som-emmc-1gib.img
 
+pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6dl_som_lc_emmc_1gib
+CFG_start_phytec_phycore_imx6dl_som_lc_emmc_1gib.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058dl-1gib.imxcfg
+FILE_barebox-phytec-phycore-imx6dl-som-lc-emmc-1gib.img = start_phytec_phycore_imx6dl_som_lc_emmc_1gib.pblb.imximg
+image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6dl-som-lc-emmc-1gib.img
+
 pblb-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6q_samx6i
 CFG_start_imx6q_samx6i.pblb.imximg = $(board)/kontron-samx6i/flash-header-samx6i-quad.imxcfg
 FILE_barebox-imx6q-samx6i.img = start_imx6q_samx6i.pblb.imximg
-- 
2.7.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2019-07-02 12:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-02 12:37 Stefan Riedmueller [this message]
2019-07-02 12:37 ` [PATCH 2/8] ARM: dts: imx6qdl: phycore: Add state framework Stefan Riedmueller
2019-07-02 12:37 ` [PATCH 3/8] ARM: dts: imx6ul: phycore: Add eeprom label Stefan Riedmueller
2019-07-02 12:37 ` [PATCH 4/8] ARM: dts: imx6ul: phycore: Add state framework Stefan Riedmueller
2019-07-09  8:57   ` Roland Hieber
2019-07-02 12:37 ` [PATCH 5/8] ARM: imx6ul: phycore: Prepare for eMMC module Stefan Riedmueller
2019-07-02 12:37 ` [PATCH 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support Stefan Riedmueller
2019-07-02 12:37 ` [PATCH 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC Stefan Riedmueller
2019-07-02 12:37 ` [PATCH 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC Stefan Riedmueller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1562071065-367410-1-git-send-email-s.riedmueller@phytec.de \
    --to=s.riedmueller@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox