From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 7/8] ARM: dts: imx6ul: phycore: Add support for eMMC
Date: Wed, 10 Jul 2019 13:17:34 +0200 [thread overview]
Message-ID: <1562757455-445159-7-git-send-email-s.riedmueller@phytec.de> (raw)
In-Reply-To: <1562757455-445159-1-git-send-email-s.riedmueller@phytec.de>
Add support for phyCORE-i.MX 6UL/ULL modules with eMMC instead of NAND
flash.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
No changes in v2
---
arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 42 +++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
index 1ef9d547822e..0ec7eae1eff0 100644
--- a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -25,6 +25,12 @@
device-path = &usdhc1, "partname:barebox-environment";
status = "disabled";
};
+
+ environment-sd2 {
+ compatible = "barebox,environment";
+ device-path = &usdhc2, "partname:barebox-environment";
+ status = "disabled";
+ };
};
};
@@ -125,6 +131,27 @@
};
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
@@ -196,6 +223,21 @@
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+ >;
+ };
};
};
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-07-10 11:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 11:17 [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore Stefan Riedmueller
2019-07-10 11:17 ` [PATCH v2 2/8] ARM: dts: imx6qdl: phycore: Add state framework Stefan Riedmueller
2019-07-10 11:17 ` [PATCH v2 3/8] ARM: dts: imx6ul: phycore: Add eeprom label Stefan Riedmueller
2019-07-10 11:17 ` [PATCH v2 4/8] ARM: dts: imx6ul: phycore: Add state framework Stefan Riedmueller
2019-07-10 11:17 ` [PATCH v2 5/8] ARM: imx6ul: phycore: Prepare for eMMC module Stefan Riedmueller
2019-07-10 11:17 ` [PATCH v2 6/8] ARM: phytec-som-imx: imx6ul: Add eMMC support Stefan Riedmueller
2019-07-10 11:17 ` Stefan Riedmueller [this message]
2019-07-10 11:17 ` [PATCH v2 8/8] ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC Stefan Riedmueller
2019-07-11 6:43 ` [PATCH v2 1/8] ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore Sascha Hauer
2019-07-11 10:07 ` Stefan Riedmüller
2019-07-12 6:16 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562757455-445159-7-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox