From: Du Huanpeng <u74147@gmail.com>
To: barebox@lists.infradead.org
Cc: Du Huanpeng <u74147@gmail.com>
Subject: [PATCH] ls1b200: dts: add serials and nand nodes
Date: Wed, 28 Oct 2020 20:15:59 +0800 [thread overview]
Message-ID: <1603887359-12609-1-git-send-email-u74147@gmail.com> (raw)
add all serials and sort them by base address.
UART0_1, UART0_2, UART0_3 renamed to
serial6, serial7, serial8.
UART1_1, UART1_2, UART1_3 renamed to
serial9, serial10, serial11.
because the nand and pll share the some base
address, so add it as well.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
---
arch/mips/dts/ls1b.dtsi | 158 ++++++++++++++++++++++++++++++++++++++----------
1 file changed, 125 insertions(+), 33 deletions(-)
diff --git a/arch/mips/dts/ls1b.dtsi b/arch/mips/dts/ls1b.dtsi
index 8b772af..0bd3d08 100644
--- a/arch/mips/dts/ls1b.dtsi
+++ b/arch/mips/dts/ls1b.dtsi
@@ -11,43 +11,135 @@
device_type = "soc";
ranges;
- serial0: serial@1fe40000 {
- compatible = "ns16550a";
- reg = <0x1fe40000 0x8>;
- reg-shift = <0>;
- clock-frequency = <83000000>;
- status = "disabled";
- };
+ xbar {
+ compatible = "loongson,xbar-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- serial1: serial@1fe44000 {
- compatible = "ns16550a";
- reg = <0x1fe44000 0x8>;
- reg-shift = <0>;
- clock-frequency = <83000000>;
- status = "disabled";
- };
+ axi-mux {
+ compatible = "loongson,axi-mux", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- serial2: serial@1fe48000 {
- compatible = "ns16550a";
- reg = <0x1fe48000 0x8>;
- reg-shift = <0>;
- clock-frequency = <83000000>;
- status = "disabled";
- };
- serial3: serial@1fe4c000 {
- compatible = "ns16550a";
- reg = <0x1fe4c000 0x8>;
- reg-shift = <0>;
- clock-frequency = <83000000>;
- status = "disabled";
- };
+ apb@0x1fe40000 {
+ compatible = "loongson,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ serial0: serial@1fe40000 {
+ compatible = "ns16550a";
+ reg = <0x1fe40000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial6: serial@1fe41000 {
+ compatible = "ns16550a";
+ reg = <0x1fe41000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial7: serial@1fe42000 {
+ compatible = "ns16550a";
+ reg = <0x1fe42000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial8: serial@1fe43000 {
+ compatible = "ns16550a";
+ reg = <0x1fe43000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial1: serial@1fe44000 {
+ compatible = "ns16550a";
+ reg = <0x1fe44000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial9: serial@1fe45000 {
+ compatible = "ns16550a";
+ reg = <0x1fe45000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial10: serial@1fe46000 {
+ compatible = "ns16550a";
+ reg = <0x1fe46000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial11: serial@1fe47000 {
+ compatible = "ns16550a";
+ reg = <0x1fe47000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial2: serial@1fe48000 {
+ compatible = "ns16550a";
+ reg = <0x1fe48000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial3: serial@1fe4c000 {
+ compatible = "ns16550a";
+ reg = <0x1fe4c000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial4: serial@1fe6c000 {
+ compatible = "ns16550a";
+ reg = <0x1fe6c000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ serial5: serial@1fe7c000 {
+ compatible = "ns16550a";
+ reg = <0x1fe7c000 0x8>;
+ reg-shift = <0>;
+ clocks = <&pll LS1B_CLK_APB_DIV>;
+ status = "disabled";
+ };
+
+ nand: nand@1fe78000 {
+ compatible = "loongson,ls1b-nand";
+ reg = <0x1fe78000 0x30>, <0x1fe78040 0x8>;
+ reg-names = "ctrl", "dma";
+ };
- pll: pll@1fe78030 {
- compatible = "loongson,ls1b-pll";
- #clock-cells = <1>;
- reg = <0x1fe78030 0x8>;
- clocks = <&oscillator>;
+ pll: pll@1fe78030 {
+ compatible = "loongson,ls1b-pll";
+ #clock-cells = <1>;
+ reg = <0x1fe78030 0x8>;
+ clocks = <&oscillator>;
+ };
+ };
+ };
};
};
};
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-10-28 12:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-28 12:15 Du Huanpeng [this message]
2020-10-28 14:14 ` Du Huanpeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1603887359-12609-1-git-send-email-u74147@gmail.com \
--to=u74147@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox