mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Alexander Shiyan" <shc_work@mail.ru>
To: gianluca <gianlucarenzi@eurek.it>
Cc: barebox@lists.infradead.org
Subject: Re: i.MX6Q ldb after 2019.02
Date: Fri, 13 Nov 2020 12:56:39 +0300	[thread overview]
Message-ID: <1605261399.931551260@f475.i.mail.ru> (raw)
In-Reply-To: <809d5654-6885-daf6-43d4-457faa274b1f@eurek.it>

>Пятница, 13 ноября 2020, 12:15 +03:00 от gianluca <gianlucarenzi@eurek.it>:
>
>On 11/13/20 9:51 AM, Alexander Shiyan wrote:
>> Hello All.
>> 
>> I am having problems updating the barebox from version 2019.02 to version 2020.10.
>> The barebox i.MX6 CLK driver now uses several patches compared to the previous
>> version to fix the err009219 bug, and the display no more works as before.
>> I use a board based on i.MX6Q revision 1.2. With the old bootloader, the LVDS channel
>> is initialized and I can display the splash screen in the barebox. After loading the kernel,
>> everything works too.
>> I added source selection for LVDS channels and the kernel works with these additions.
>> &clks {
>> assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
>>   <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
>> assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
>>  <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
>> };
>> 
>> The splash screen in new version is not displayed in the barebox.
>> So, the question, what I do incorrect and how to fix this?
>> Old clk_dump:
>>      pll5_video (rate 716800008, enabled)
>>          pll5_post_div (rate 179200002, enabled)
>>              pll5_video_div (rate 44800001, enabled)
>>                  ldb_di0_sel (rate 44800001, enabled)
>>                      ldb_di0_div_3_5 (rate 12800000, enabled)
>>                          ldb_di0_podf (rate 6400000, enabled)
>>                              ipu1_di0_sel (rate 6400000, enabled)
>>                                  ipu1_di0 (rate 6400000, enabled)
>>                                      2400000.ipu@2400000.of_di0_pixel (rate 6400000, enabled)
>>                              ldb_di0 (rate 6400000, enabled)
>> New:
>>      pll5_video (rate 716800008, enable_count: 1, unknown)
>>          pll5_post_div (rate 358400004, enable_count: 1, always enabled)
>This is a div2. Should be div4
>
>>              pll5_video_div (rate 179200002, enable_count: 1, always enabled)
>>                  ldb_di0_sel (rate 179200002, enable_count: 1, always enabled)
>>                      ldb_di0_div_3_5 (rate 51200000, enable_count: 1, always enabled)
>>                          ldb_di0_podf (rate 25600000, enable_count: 1, always enabled)
>>                              ipu1_di0_sel (rate 25600000, enable_count: 1, always enabled)
>>                                  ipu1_di0 (rate 25600000, enable_count: 1, enabled)
>>                                      2400000.ipu@2400000.of_di0_pixel (rate 6400000, enable_count: 1, always enabled)
>>                              ldb_di0 (rate 25600000, enable_count: 0, enabled)
>> 
>> Can anyone help me to resolve this?
>
>Try to use pll5_post_div as div4 of the original pll5_video. All others 
>should be adapting correctly then.

With the help of the clk_set_rate, I achieved a complete frequency match for the old and new versions.
... But the screen is black and no splash is shown.

Thanks anyway!
---
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-11-13  9:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-13  8:51 Alexander Shiyan
2020-11-13  9:13 ` gianluca
2020-11-13  9:56   ` Alexander Shiyan [this message]
2020-11-13 11:01 ` Ahmad Fatoum
2020-11-13 11:55   ` Alexander Shiyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1605261399.931551260@f475.i.mail.ru \
    --to=shc_work@mail.ru \
    --cc=barebox@lists.infradead.org \
    --cc=gianlucarenzi@eurek.it \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox