mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Renaud Barbier <renaud.barbier@abaco.com>
To: barebox@lists.infradead.org
Cc: Renaud Barbier <renaud.barbier@abaco.com>
Subject: [PATCH 3/3] ls1046ardb: enable IFC NAND.
Date: Fri, 13 Aug 2021 09:16:48 +0100	[thread overview]
Message-ID: <1628842608-17031-4-git-send-email-renaud.barbier@abaco.com> (raw)
In-Reply-To: <1628842608-17031-1-git-send-email-renaud.barbier@abaco.com>

Set the NAND timings and enable the IFC NAND driver.

Signed-off-by: Renaud Barbier <renaud.barbier@abaco.com>
---
 arch/arm/configs/layerscape_defconfig | 11 +++++++
 arch/arm/mach-layerscape/Makefile     |  1 +
 arch/arm/mach-layerscape/nand.c       | 44 +++++++++++++++++++++++++++
 3 files changed, 56 insertions(+)
 create mode 100644 arch/arm/mach-layerscape/nand.c

diff --git a/arch/arm/configs/layerscape_defconfig b/arch/arm/configs/layerscape_defconfig
index 394cd95c98..fb8e885353 100644
--- a/arch/arm/configs/layerscape_defconfig
+++ b/arch/arm/configs/layerscape_defconfig
@@ -34,6 +34,10 @@ CONFIG_CMD_GO=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_UIMAGE=y
 CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBIFORMAT=y
+CONFIG_CMD_UMOUNT=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_LOADENV=y
 CONFIG_CMD_PRINTENV=y
@@ -69,6 +73,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_LED=y
 CONFIG_CMD_SPI=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_LED_TRIGGER=y
 CONFIG_CMD_WD=y
 CONFIG_CMD_BAREBOX_UPDATE=y
@@ -85,6 +90,10 @@ CONFIG_DP83867_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_DRIVER_SPI_FSL_QUADSPI=y
+CONFIG_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_I2C=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MUX=y
@@ -112,5 +121,7 @@ CONFIG_FS_NFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_WRITE=y
 CONFIG_FS_FAT_LFN=y
+CONFIG_FS_UBIFS=y
+CONFIG_FS_UBIFS_COMPRESSION_LZO=y
 CONFIG_ZLIB=y
 CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-layerscape/Makefile b/arch/arm/mach-layerscape/Makefile
index 854a327c91..99da7b2af0 100644
--- a/arch/arm/mach-layerscape/Makefile
+++ b/arch/arm/mach-layerscape/Makefile
@@ -6,3 +6,4 @@ obj-pbl-y += boot.o
 pbl-y += xload-qspi.o xload.o
 obj-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa.o ppa-entry.o
 obj-$(CONFIG_BOOTM) += pblimage.o
+obj-$(CONFIG_NAND_FSL_IFC) += nand.o
diff --git a/arch/arm/mach-layerscape/nand.c b/arch/arm/mach-layerscape/nand.c
new file mode 100644
index 0000000000..b36c6b3c46
--- /dev/null
+++ b/arch/arm/mach-layerscape/nand.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <init.h>
+#include <of_address.h>
+#include <linux/fsl_ifc.h>
+
+static int rdb_nand_init(void)
+{
+	struct device_node *np;
+	void __iomem *ifc;
+
+	if (!of_machine_is_compatible("fsl,ls1046a-rdb"))
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ifc");
+	if (!np)
+		return -EINVAL;
+
+	ifc = of_iomap(np, 0);
+	if (!ifc)
+		return -EINVAL;
+
+	set_ifc_cspr(ifc, IFC_CS0, CSPR_PHYS_ADDR(0x7e800000) |
+			CSPR_PORT_SIZE_8 | CSPR_MSEL_NAND | CSPR_V);
+	set_ifc_csor(ifc, IFC_CS0, CSOR_NAND_ECC_ENC_EN | CSOR_NAND_ECC_DEC_EN |
+			CSOR_NAND_ECC_MODE_8 |
+			CSOR_NAND_RAL_3 | CSOR_NAND_PGS_4K |
+			CSOR_NAND_SPRZ_224 |  CSOR_NAND_PB(64) |
+			CSOR_NAND_TRHZ_20);
+	set_ifc_amask(ifc, IFC_CS0, IFC_AMASK(64*1024));
+	set_ifc_ftim(ifc, IFC_CS0, IFC_FTIM0, FTIM0_NAND_TCCST(0x07) |
+			FTIM0_NAND_TWP(0x18) | FTIM0_NAND_TWCHT(0x07) |
+			FTIM0_NAND_TWH(0x0a));
+	set_ifc_ftim(ifc, IFC_CS0, IFC_FTIM1, FTIM1_NAND_TADLE(0x32) |
+			FTIM1_NAND_TWBE(0x39) | FTIM1_NAND_TRR(0x0e)|
+			FTIM1_NAND_TRP(0x18));
+	set_ifc_ftim(ifc, IFC_CS0, IFC_FTIM2, FTIM2_NAND_TRAD(0xf) |
+			FTIM2_NAND_TREH(0xa) | FTIM2_NAND_TWHRE(0x1e));
+	set_ifc_ftim(ifc, IFC_CS0, IFC_FTIM3, 0);
+
+	return 0;
+}
+postcore_initcall(rdb_nand_init);
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-08-13  8:19 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-13  8:16 [PATCH v3 0/3] NXP IFC nand driver Renaud Barbier
2021-08-13  8:16 ` [PATCH 1/3] ARM: atomic.h: add 64-bit counter support Renaud Barbier
2021-08-13  8:16 ` [PATCH 2/3] nand: add NXP IFC nand driver Renaud Barbier
2021-08-13  8:16 ` Renaud Barbier [this message]
2021-08-23 14:03   ` [PATCH 3/3] ls1046ardb: enable IFC NAND Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2021-08-02 10:40 [PATCH v2 0/3] NXP IFC nand driver Renaud Barbier
2021-08-02 10:40 ` [PATCH 3/3] ls1046ardb: enable IFC NAND Renaud Barbier
2021-08-09 10:49   ` Ahmad Fatoum
2021-08-10 10:33     ` Barbier, Renaud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1628842608-17031-4-git-send-email-renaud.barbier@abaco.com \
    --to=renaud.barbier@abaco.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox