mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Stefan Kerkmann <s.kerkmann@pengutronix.de>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/2] habv4: correct habv4 rom vector table
Date: Fri, 12 Jan 2024 17:04:41 +0100	[thread overview]
Message-ID: <17c001bc-e000-4d19-9710-b6a0bd7906ee@pengutronix.de> (raw)
In-Reply-To: <e7e3a93a-8764-488a-9f03-46656421adbd@pengutronix.de>

On 12.01.24 16:26, Stefan Kerkmann wrote:
> Hello Ahmad,
> 
> On 11.01.24 16:57, Ahmad Fatoum wrote:
>> Hello Stefan,
>>
>>> diff --git a/drivers/hab/habv4.c b/drivers/hab/habv4.c
>>> index ed6d4db77c..dfa0207435 100644
>>> --- a/drivers/hab/habv4.c
>>> +++ b/drivers/hab/habv4.c
>>> @@ -144,31 +144,41 @@ struct hab_header {
>>>       uint8_t par;
>>>   } __packed;
>>>   -typedef enum hab_status hab_loader_callback_fn(void **start, uint32_t *bytes, const void *boot_data);
>>> +typedef enum hab_status hab_loader_callback_fn(void **start, size_t *bytes, const void *boot_data);
>>> +typedef void (*hab_image_entry_fn)(void);
>>
>> While it only matter for forward declaration, perhaps, change this
>> to be a non-pointer like hab_loader_callback_fn above?
> 
> Done in v2.
> 
>>> +    enum hab_status (*run_dcd)(const uint8_t *dcd);
>>> +    enum hab_status (*run_csf)(const uint8_t *csf, uint8_t cid, uint32_t srkmask);
>>>       enum hab_status (*assert)(enum hab_assertion assertion, const void *data, uint32_t count);
>>> -    enum hab_status (*report_event)(enum hab_status status, uint32_t index, void *event, uint32_t *bytes);
>>> +    enum hab_status (*report_event)(enum hab_status status, uint32_t index, uint8_t *event, size_t *bytes);
>>>       enum hab_status (*report_status)(enum hab_config *config, enum habv4_state *state);
>>>       void (*failsafe)(void);
>>> +    hab_image_entry_fn(* authenticate_image_no_dcd)(uint8_t cid, ptrdiff_t ivt_offset, void **start, size_t *bytes, hab_loader_callback_fn loader);
>>
>> And here you rely on a function pointer being automatically derived.
>> While that's ok from a correctness point of view, for symmetry, it
>> would be better to stick to one type.
> 
> Done in v2.
> 
>>> +    uint32_t(* get_version)(void);
>>
>> Nitpick: space after uint32_t and not before get_version.
>>
> 
> Done in v2.
> 
>>> +    enum hab_status (*authenticate_container)(uint8_t cid, ptrdiff_t ivt_offset, void **start, size_t *bytes, hab_loader_callback_fn loader, uint32_t srkmask, int skip_dcd);
>>>   } __packed;
>>>   -#define FSL_SIP_HAB             0xC2000007
>>
>> This is removed without replacement?
>>
> 
> No it is still there, the diff is a bit misleading.

Ah, its whitespace was changed..

> 
> Regards,
> Stefan
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




  reply	other threads:[~2024-01-12 16:06 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-11 15:42 [PATCH 0/2] Use HABv4 report_event implementation for imx8mm and imx8mn Stefan Kerkmann
2024-01-11 15:42 ` [PATCH 1/2] habv4: correct habv4 rom vector table Stefan Kerkmann
2024-01-11 15:57   ` Ahmad Fatoum
2024-01-12 15:26     ` Stefan Kerkmann
2024-01-12 16:04       ` Ahmad Fatoum [this message]
2024-01-12  6:53   ` Marc Kleine-Budde
2024-01-11 15:42 ` [PATCH 2/2] habv4: use hab rom implementation of report_event Stefan Kerkmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17c001bc-e000-4d19-9710-b6a0bd7906ee@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=s.kerkmann@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox