mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 2/5] Add EP93xx ethernet driver
@ 2010-01-09 23:28 Matthias Kaehlcke
  2010-01-11 10:12 ` Sascha Hauer
  0 siblings, 1 reply; 3+ messages in thread
From: Matthias Kaehlcke @ 2010-01-09 23:28 UTC (permalink / raw)
  To: barebox

Added ethernet driver for EP93xx SoCs

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
---
 drivers/net/Kconfig  |    5 +
 drivers/net/Makefile |    1 +
 drivers/net/ep93xx.c |  686 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ep93xx.h |  155 ++++++++++++
 include/common.h     |    1 +
 5 files changed, 848 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/ep93xx.c
 create mode 100644 drivers/net/ep93xx.h

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ed7656e..0955562 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -64,6 +64,11 @@ config DRIVER_NET_FEC_IMX
 	depends on ARCH_HAS_FEC_IMX
 	select MIIPHY
 
+config DRIVER_NET_EP93XX
+	bool "EP93xx Ethernet driver"
+	depends on ARCH_EP93XX
+	select MIIPHY
+
 config DRIVER_NET_MACB
 	bool "macb Ethernet driver"
 	depends on ARCH_AT91
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6751920..1b6f104 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DRIVER_NET_NETX)		+= netx_eth.o
 obj-$(CONFIG_DRIVER_NET_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_DRIVER_NET_MPC5200)	+= fec_mpc5200.o
 obj-$(CONFIG_DRIVER_NET_FEC_IMX)	+= fec_imx.o
+obj-$(CONFIG_DRIVER_NET_EP93XX)		+= ep93xx.o
 obj-$(CONFIG_DRIVER_NET_MACB)		+= macb.o
 obj-$(CONFIG_DRIVER_NET_TAP)		+= tap.o
 obj-$(CONFIG_MIIPHY)			+= miiphy.o
diff --git a/drivers/net/ep93xx.c b/drivers/net/ep93xx.c
new file mode 100644
index 0000000..63a0d1b
--- /dev/null
+++ b/drivers/net/ep93xx.c
@@ -0,0 +1,686 @@
+/*
+ * Cirrus Logic EP93xx ethernet MAC / MII driver.
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver,
+ * which is
+ *
+ * (C) Copyright 2002 2003
+ * Adam Bezanson, Network Audio Technologies, Inc.
+ * <bezanson@netaudiotech.com>
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <init.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <linux/types.h>
+#include <mach/ep93xx-regs.h>
+#include "ep93xx.h"
+
+static int ep93xx_eth_send_packet(struct eth_device *edev,
+				void *packet, int length);
+static int ep93xx_eth_rcv_packet(struct eth_device *edev);
+
+static int ep93xx_phy_read(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t *value);
+static int ep93xx_phy_write(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t value);
+
+static inline struct ep93xx_eth_priv *ep93xx_get_priv(struct eth_device *edev)
+{
+	return (struct ep93xx_eth_priv *)edev->priv;
+}
+
+static inline struct mac_regs *ep93xx_get_regs(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+
+	return priv->regs;
+}
+
+#if defined(EP93XX_MAC_DEBUG)
+/**
+ * Dump ep93xx_mac values to the terminal.
+ */
+inline void dump_dev(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_dev()\n");
+	printf("  rx_dq.base	     %08X\n", priv->rx_dq.base);
+	printf("  rx_dq.current	     %08X\n", priv->rx_dq.current);
+	printf("  rx_dq.end	     %08X\n", priv->rx_dq.end);
+	printf("  rx_sq.base	     %08X\n", priv->rx_sq.base);
+	printf("  rx_sq.current	     %08X\n", priv->rx_sq.current);
+	printf("  rx_sq.end	     %08X\n", priv->rx_sq.end);
+
+	for (i = 0; i < NUMRXDESC; i++)
+		printf("  rx_buffer[%2.d]      %08X\n", i, NetRxPackets[i]);
+
+	printf("  tx_dq.base	     %08X\n", priv->tx_dq.base);
+	printf("  tx_dq.current	     %08X\n", priv->tx_dq.current);
+	printf("  tx_dq.end	     %08X\n", priv->tx_dq.end);
+	printf("  tx_sq.base	     %08X\n", priv->tx_sq.base);
+	printf("  tx_sq.current	     %08X\n", priv->tx_sq.current);
+	printf("  tx_sq.end	     %08X\n", priv->tx_sq.end);
+}
+
+/**
+ * Dump all RX descriptor queue entries to the terminal.
+ */
+inline void dump_rx_descriptor_queue(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_rx_descriptor_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMRXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->rx_dq.base + i),
+			(priv->rx_dq.base + i)->word1,
+			(priv->rx_dq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all RX status queue entries to the terminal.
+ */
+inline void dump_rx_status_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_rx_status_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMRXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->rx_sq.base + i),
+			(priv->rx_sq.base + i)->word1,
+			(priv->rx_sq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all TX descriptor queue entries to the terminal.
+ */
+inline void dump_tx_descriptor_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_tx_descriptor_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMTXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->tx_dq.base + i),
+			(priv->tx_dq.base + i)->word1,
+			(priv->tx_dq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all TX status queue entries to the terminal.
+ */
+inline void dump_tx_status_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_tx_status_queue()\n");
+	printf("  descriptor address	 word1\n");
+	for (i = 0; i < NUMTXDESC; i++) {
+		printf("  [ %08X ]	     %08X\n",
+			(priv->rx_sq.base + i),
+			(priv->rx_sq.base + i)->word1);
+	}
+}
+#else
+#define dump_dev(x)
+#define dump_rx_descriptor_queue()
+#define dump_rx_status_queue()
+#define dump_tx_descriptor_queue()
+#define dump_tx_status_queue()
+#endif	/* defined(EP93XX_MAC_DEBUG) */
+
+/**
+ * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
+ * it's cleared.
+ */
+static void ep93xx_eth_reset(struct eth_device *edev)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	uint32_t value;
+
+	pr_debug("+ep93xx_eth_reset\n");
+
+	value = readl(&regs->selfctl);
+	value |= SELFCTL_RESET;
+	writel(value, &regs->selfctl);
+
+	while (readl(&regs->selfctl) & SELFCTL_RESET)
+		; /* noop */
+
+	pr_debug("-ep93xx_eth_reset\n");
+}
+
+static int ep93xx_eth_init_dev(struct eth_device *edev)
+{
+	pr_debug("+ep93xx_eth_init_dev\n");
+
+	pr_debug("-ep93xx_eth_init_dev\n");
+
+	return 0;
+}
+
+static int ep93xx_eth_open(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int i;
+
+	pr_debug("+ep93xx_eth_open\n");
+
+	ep93xx_eth_reset(edev);
+
+	/* Reset the descriptor queues' current and end address values */
+	priv->tx_dq.current = priv->tx_dq.base;
+	priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);
+
+	priv->tx_sq.current = priv->tx_sq.base;
+	priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);
+
+	priv->rx_dq.current = priv->rx_dq.base;
+	priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);
+
+	priv->rx_sq.current = priv->rx_sq.base;
+	priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);
+
+	/*
+	 * Set the transmit descriptor and status queues' base address,
+	 * current address, and length registers.  Set the maximum frame
+	 * length and threshold. Enable the transmit descriptor processor.
+	 */
+	writel((uint32_t)priv->tx_dq.base, &regs->txdq.badd);
+	writel((uint32_t)priv->tx_dq.base, &regs->txdq.curadd);
+	writel(sizeof(struct tx_descriptor) * NUMTXDESC, &regs->txdq.blen);
+
+	writel((uint32_t)priv->tx_sq.base, &regs->txstsq.badd);
+	writel((uint32_t)priv->tx_sq.base, &regs->txstsq.curadd);
+	writel(sizeof(struct tx_status) * NUMTXDESC, &regs->txstsq.blen);
+
+	writel(0x00040000, &regs->txdthrshld);
+	writel(0x00040000, &regs->txststhrshld);
+
+	writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &regs->maxfrmlen);
+	writel(BMCTL_TXEN, &regs->bmctl);
+
+	/*
+	 * Set the receive descriptor and status queues' base address,
+	 * current address, and length registers.  Enable the receive
+	 * descriptor processor.
+	 */
+	writel((uint32_t)priv->rx_dq.base, &regs->rxdq.badd);
+	writel((uint32_t)priv->rx_dq.base, &regs->rxdq.curadd);
+	writel(sizeof(struct rx_descriptor) * NUMRXDESC, &regs->rxdq.blen);
+
+	writel((uint32_t)priv->rx_sq.base, &regs->rxstsq.badd);
+	writel((uint32_t)priv->rx_sq.base, &regs->rxstsq.curadd);
+	writel(sizeof(struct rx_status) * NUMRXDESC, &regs->rxstsq.blen);
+
+	writel(0x00040000, &regs->rxdthrshld);
+
+	writel(BMCTL_RXEN, &regs->bmctl);
+
+	writel(0x00040000, &regs->rxststhrshld);
+
+	/* Wait until the receive descriptor processor is active */
+	while (!(readl(&regs->bmsts) & BMSTS_RXACT))
+		; /* noop */
+
+	/*
+	 * Initialize the RX descriptor queue. Clear the TX descriptor queue.
+	 * Clear the RX and TX status queues. Enqueue the RX descriptor and
+	 * status entries to the MAC.
+	 */
+	for (i = 0; i < NUMRXDESC; i++) {
+		/* set buffer address */
+		(priv->rx_dq.base + i)->word1 = (uint32_t)NetRxPackets[i];
+
+		/* set buffer length, clear buffer index and NSOF */
+		(priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
+	}
+
+	memset(priv->tx_dq.base, 0,
+		(sizeof(struct tx_descriptor) * NUMTXDESC));
+	memset(priv->rx_sq.base, 0,
+		(sizeof(struct rx_status) * NUMRXDESC));
+	memset(priv->tx_sq.base, 0,
+		(sizeof(struct tx_status) * NUMTXDESC));
+
+	writel(NUMRXDESC, &regs->rxdqenq);
+	writel(NUMRXDESC, &regs->rxstsqenq);
+
+	/* Turn on RX and TX */
+	writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
+		RXCTL_RCRCA | RXCTL_MA, &regs->rxctl);
+	writel(TXCTL_STXON, &regs->txctl);
+
+	/* Dump data structures if we're debugging */
+	dump_dev();
+	dump_rx_descriptor_queue();
+	dump_rx_status_queue();
+	dump_tx_descriptor_queue();
+	dump_tx_status_queue();
+
+	pr_debug("-ep93xx_eth_open\n");
+
+	return 0;
+}
+
+/**
+ * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
+ * registers.
+ */
+static void ep93xx_eth_halt(struct eth_device *edev)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+
+	pr_debug("+ep93xx_eth_halt\n");
+
+	writel(0x00000000, &regs->rxctl);
+	writel(0x00000000, &regs->txctl);
+
+	pr_debug("-ep93xx_eth_halt\n");
+}
+
+static int ep93xx_eth_get_ethaddr(struct eth_device *edev,
+				unsigned char *mac_addr)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	uint32_t value;
+
+	value = readl(&regs->indad);
+	mac_addr[0] = value & 0xFF;
+	mac_addr[1] = (value >> 8) & 0xFF;
+	mac_addr[2] = (value >> 16) & 0xFF;
+	mac_addr[3] = (value >> 24) & 0xFF;
+
+	value = readl(&regs->indad_upper);
+	mac_addr[4] = value & 0xFF;
+	mac_addr[5] = (value >> 8) & 0xFF;
+
+	return 0;
+}
+
+static int ep93xx_eth_set_ethaddr(struct eth_device *edev,
+				unsigned char *mac_addr)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+
+	writel(AFP_IAPRIMARY, &regs->afp);
+
+	writel(mac_addr[0] | (mac_addr[1] << 8) |
+		(mac_addr[2] << 16) | (mac_addr[3] << 24),
+		&regs->indad);
+	writel(mac_addr[4] | (mac_addr[5] << 8), &regs->indad_upper);
+
+	return 0;
+}
+
+static int ep93xx_eth_probe(struct device_d *dev)
+{
+	struct eth_device *edev;
+	struct ep93xx_eth_priv *priv;
+	int ret = ETH_STATUS_FAILURE;
+
+	pr_debug("ep93xx_eth_probe()\n");
+
+	edev = xzalloc(sizeof(struct eth_device) +
+		sizeof(struct ep93xx_eth_priv));
+	dev->type_data = edev;
+	edev->priv = (struct ep93xx_eth_priv *)(edev + 1);
+
+	priv = edev->priv;
+	priv->regs = (struct mac_regs *)MAC_BASE;
+
+	edev->init = ep93xx_eth_init_dev;
+	edev->open = ep93xx_eth_open;
+	edev->send = ep93xx_eth_send_packet;
+	edev->recv = ep93xx_eth_rcv_packet;
+	edev->halt = ep93xx_eth_halt;
+	edev->get_ethaddr = ep93xx_eth_get_ethaddr;
+	edev->set_ethaddr = ep93xx_eth_set_ethaddr;
+
+	priv->miiphy.read = ep93xx_phy_read;
+	priv->miiphy.write = ep93xx_phy_write;
+	priv->miiphy.address = 0;
+	priv->miiphy.flags = 0;
+
+	priv->tx_dq.base = calloc(NUMTXDESC,
+				sizeof(struct tx_descriptor));
+	if (priv->tx_dq.base == NULL) {
+		pr_err("calloc() failed: tx_dq.base");
+		goto eth_probe_failed_0;
+	}
+
+	priv->tx_sq.base = calloc(NUMTXDESC,
+				sizeof(struct tx_status));
+	if (priv->tx_sq.base == NULL) {
+		pr_err("calloc() failed: tx_sq.base");
+		goto eth_probe_failed_1;
+	}
+
+	priv->rx_dq.base = calloc(NUMRXDESC,
+				sizeof(struct rx_descriptor));
+	if (priv->rx_dq.base == NULL) {
+		pr_err("calloc() failed: rx_dq.base");
+		goto eth_probe_failed_2;
+	}
+
+	priv->rx_sq.base = calloc(NUMRXDESC,
+				sizeof(struct rx_status));
+	if (priv->rx_sq.base == NULL) {
+		pr_err("calloc() failed: rx_sq.base");
+		goto eth_probe_failed_3;
+	}
+
+	miiphy_register(&priv->miiphy);
+	eth_register(edev);
+
+	ret = ETH_STATUS_SUCCESS;
+
+	goto eth_probe_done;
+
+eth_probe_failed_3:
+	free(priv->rx_dq.base);
+	/* Fall through */
+
+eth_probe_failed_2:
+	free(priv->tx_sq.base);
+	/* Fall through */
+
+eth_probe_failed_1:
+	free(priv->tx_dq.base);
+	/* Fall through */
+
+eth_probe_failed_0:
+	/* Fall through */
+
+eth_probe_done:
+	return ret;
+}
+
+/**
+ * Copy a frame of data from the MAC into the protocol layer for further
+ * processing.
+ *
+ * TODO: Enhance this to deal with as many packets as are available at
+ * the MAC at one time? */
+static int ep93xx_eth_rcv_packet(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int ret = ETH_STATUS_FAILURE;
+
+	pr_debug("+ep93xx_eth_rcv_packet\n");
+
+	if (RX_STATUS_RFP(priv->rx_sq.current)) {
+		if (RX_STATUS_RWE(priv->rx_sq.current)) {
+			/*
+			 * We have a good frame. Extract the frame's length
+			 * from the current rx_status_queue entry, and copy
+			 * the frame's data into NetRxPackets[] of the
+			 * protocol stack. We track the total number of
+			 * bytes in the frame (nbytes_frame) which will be
+			 * used when we pass the data off to the protocol
+			 * layer via NetReceive().
+			 */
+			NetReceive((uchar *)priv->rx_dq.current->word1,
+				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
+			pr_debug("reporting %d bytes...\n",
+				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
+
+			ret = ETH_STATUS_SUCCESS;
+
+		} else {
+			/* Do we have an erroneous packet? */
+			pr_err("packet rx error, status %08X %08X\n",
+				priv->rx_sq.current->word1,
+				priv->rx_sq.current->word2);
+			dump_rx_descriptor_queue();
+			dump_rx_status_queue();
+		}
+
+		/*
+		 * Clear the associated status queue entry, and
+		 * increment our current pointers to the next RX
+		 * descriptor and status queue entries (making sure
+		 * we wrap properly).
+		 */
+		memset((void *)priv->rx_sq.current, 0,
+			sizeof(struct rx_status));
+
+		priv->rx_sq.current++;
+		if (priv->rx_sq.current >= priv->rx_sq.end)
+			priv->rx_sq.current = priv->rx_sq.base;
+
+		priv->rx_dq.current++;
+		if (priv->rx_dq.current >= priv->rx_dq.end)
+			priv->rx_dq.current = priv->rx_dq.base;
+
+		/*
+		 * Finally, return the RX descriptor and status entries
+		 * back to the MAC engine, and loop again, checking for
+		 * more descriptors to process.
+		 */
+		writel(1, &regs->rxdqenq);
+		writel(1, &regs->rxstsqenq);
+	} else {
+		ret = ETH_STATUS_SUCCESS;
+	}
+
+	pr_debug("-ep93xx_eth_rcv_packet %d\n", ret);
+
+	return ret;
+}
+
+/**
+ * Send a block of data via ethernet.
+ *
+ * TODO: Enhance this to deal with as much data as are available at one time? */
+static int ep93xx_eth_send_packet(struct eth_device *edev,
+				void *packet, int length)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int ret = ETH_STATUS_FAILURE;
+
+	pr_debug("+ep93xx_eth_send_packet\n");
+
+	/*
+	 * Initialize the TX descriptor queue with the new packet's info.
+	 * Clear the associated status queue entry. Enqueue the packet
+	 * to the MAC for transmission.
+	 */
+
+	/* set buffer address */
+	priv->tx_dq.current->word1 = (uint32_t)packet;
+
+	/* set buffer length and EOF bit */
+	priv->tx_dq.current->word2 = length | TX_DESC_EOF;
+
+	/* clear tx status */
+	priv->tx_sq.current->word1 = 0;
+
+	/* enqueue the TX descriptor */
+	writel(1, &regs->txdqenq);
+
+	/* wait for the frame to become processed */
+	while (!TX_STATUS_TXFP(priv->tx_sq.current))
+		; /* noop */
+
+	if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
+		pr_err("packet tx error, status %08X\n",
+			priv->tx_sq.current->word1);
+		dump_tx_descriptor_queue();
+		dump_tx_status_queue();
+
+		/* TODO: Add better error handling? */
+		goto eth_send_failed_0;
+	}
+
+	ret = ETH_STATUS_SUCCESS;
+	/* Fall through */
+
+eth_send_failed_0:
+	pr_debug("-ep93xx_eth_send_packet %d\n", ret);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * EP93xx ethernet MII functionality.
+ */
+
+/**
+ * Maximum MII address we support
+ */
+#define MII_ADDRESS_MAX			(31)
+
+/**
+ * Maximum MII register address we support
+ */
+#define MII_REGISTER_MAX		(31)
+
+/**
+ * Ethernet MII interface return values for public functions.
+ */
+enum mii_status {
+	MII_STATUS_SUCCESS = 0,
+	MII_STATUS_FAILURE = 1,
+};
+
+/**
+ * Read a 16-bit value from an MII register.
+ */
+static int ep93xx_phy_read(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t *value)
+{
+	struct mac_regs *regs = ep93xx_get_regs(mdev->edev);
+	int ret = MII_STATUS_FAILURE;
+	uint32_t self_ctl;
+
+	pr_debug("+ep93xx_phy_read\n");
+
+	/*
+	 * Save the current SelfCTL register value.  Set MAC to suppress
+	 * preamble bits.  Wait for any previous MII command to complete
+	 * before issuing the new command.
+	 */
+	self_ctl = readl(&regs->selfctl);
+#if defined(CONFIG_MII_SUPPRESS_PREAMBLE) /* TODO */
+	writel(self_ctl & ~(1 << 8), &regs->selfctl);
+#endif	/* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
+
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/*
+	 * Issue the MII 'read' command.  Wait for the command to complete.
+	 * Read the MII data value.
+	 */
+	writel(MIICMD_OPCODE_READ | ((uint32_t)phy_addr << 5) |
+		(uint32_t)phy_reg, &regs->miicmd);
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	*value = (unsigned short)readl(&regs->miidata);
+
+	/* Restore the saved SelfCTL value and return. */
+	writel(self_ctl, &regs->selfctl);
+
+	ret = MII_STATUS_SUCCESS;
+	/* Fall through */
+
+	pr_debug("-ep93xx_phy_read\n");
+	return ret;
+}
+
+/**
+ * Write a 16-bit value to an MII register.
+ */
+static int ep93xx_phy_write(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t value)
+{
+	struct mac_regs *regs = ep93xx_get_regs(mdev->edev);
+	int ret = MII_STATUS_FAILURE;
+	uint32_t self_ctl;
+
+	pr_debug("+ep93xx_phy_write\n");
+
+	/*
+	 * Save the current SelfCTL register value.  Set MAC to suppress
+	 * preamble bits.  Wait for any previous MII command to complete
+	 * before issuing the new command.
+	 */
+	self_ctl = readl(&regs->selfctl);
+#if defined(CONFIG_MII_SUPPRESS_PREAMBLE) /* TODO */
+	writel(self_ctl & ~(1 << 8), &regs->selfctl);
+#endif	/* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
+
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/* Issue the MII 'write' command.  Wait for the command to complete. */
+	writel((uint32_t)value, &regs->miidata);
+	writel(MIICMD_OPCODE_WRITE | ((uint32_t)phy_addr << 5) | phy_reg,
+		&regs->miicmd);
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/* Restore the saved SelfCTL value and return. */
+	writel(self_ctl, &regs->selfctl);
+
+	ret = MII_STATUS_SUCCESS;
+	/* Fall through */
+
+	pr_debug("-ep93xx_phy_write\n");
+	return ret;
+}
+
+static struct driver_d ep93xx_eth_driver = {
+	.name  = "ep93xx_eth",
+	.probe = ep93xx_eth_probe,
+};
+
+static int ep93xx_eth_init(void)
+{
+	register_driver(&ep93xx_eth_driver);
+	return 0;
+}
+
+device_initcall(ep93xx_eth_init);
diff --git a/drivers/net/ep93xx.h b/drivers/net/ep93xx.h
new file mode 100644
index 0000000..827e28a
--- /dev/null
+++ b/drivers/net/ep93xx.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ETH_H
+#define _ETH_H
+
+#include <net.h>
+
+/**
+ * #define this to dump device status and queue info during initialization and
+ * following errors.
+ */
+#undef EP93XX_MAC_DEBUG
+
+/**
+ * Number of descriptor and status entries in our RX queues.
+ * It must be power of 2 !
+ */
+#define NUMRXDESC		PKTBUFSRX
+
+/**
+ * Number of descriptor and status entries in our TX queues.
+ */
+#define NUMTXDESC		1
+
+/**
+ * 944 = (1024 - 64) - 16, Fifo size - Minframesize - 16 (Chip FACT)
+ */
+#define TXSTARTMAX		944
+
+/**
+ * Ethernet MAC interface return values for public functions.
+ */
+enum eth_status {
+	ETH_STATUS_SUCCESS = 0,
+	ETH_STATUS_FAILURE = 1,
+};
+
+/**
+ * Receive descriptor queue entry
+ */
+struct rx_descriptor {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+/**
+ * Receive status queue entry
+ */
+struct rx_status {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+#define RX_STATUS_RWE(rx_status) ((rx_status->word1 >> 30) & 0x01)
+#define RX_STATUS_RFP(rx_status) ((rx_status->word1 >> 31) & 0x01)
+#define RX_STATUS_FRAME_LEN(rx_status) (rx_status->word2 & 0xFFFF)
+
+
+/**
+ * Transmit descriptor queue entry
+ */
+struct tx_descriptor {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+#define TX_DESC_EOF (1 << 31)
+
+/**
+ * Transmit status queue entry
+ */
+struct tx_status {
+	uint32_t word1;
+} __attribute__((packed));
+
+#define TX_STATUS_TXWE(tx_status) (((tx_status)->word1 >> 30) & 0x01)
+#define TX_STATUS_TXFP(tx_status) (((tx_status)->word1 >> 31) & 0x01)
+
+/**
+ * Transmit descriptor queue
+ */
+struct tx_descriptor_queue {
+	struct tx_descriptor *base;
+	struct tx_descriptor *current;
+	struct tx_descriptor *end;
+};
+
+/**
+ * Transmit status queue
+ */
+struct tx_status_queue {
+	struct tx_status *base;
+	volatile struct tx_status *current;
+	struct tx_status *end;
+};
+
+/**
+ * Receive descriptor queue
+ */
+struct rx_descriptor_queue {
+	struct rx_descriptor *base;
+	struct rx_descriptor *current;
+	struct rx_descriptor *end;
+};
+
+/**
+ * Receive status queue
+ */
+struct rx_status_queue {
+	struct rx_status *base;
+	volatile struct rx_status *current;
+	struct rx_status *end;
+};
+
+/**
+ * EP93xx MAC private data structure
+ */
+struct ep93xx_eth_priv {
+	struct mac_regs			*regs;
+
+	struct rx_descriptor_queue	rx_dq;
+	struct rx_status_queue		rx_sq;
+	void				*rx_buffer[NUMRXDESC];
+
+	struct tx_descriptor_queue	tx_dq;
+	struct tx_status_queue		tx_sq;
+
+	struct miiphy_device miiphy;
+};
+
+#endif
diff --git a/include/common.h b/include/common.h
index 0c49d95..2b40954 100644
--- a/include/common.h
+++ b/include/common.h
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/stddef.h>
 #include <asm/common.h>
 
 #define pr_info(fmt, arg...)	printf(fmt, ##arg)
-- 
1.6.3.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 2/5] Add EP93xx ethernet driver
  2010-01-09 23:28 [PATCH 2/5] Add EP93xx ethernet driver Matthias Kaehlcke
@ 2010-01-11 10:12 ` Sascha Hauer
  2010-01-11 21:27   ` [PATCH] Add EP93xx ethernet driver [rev2] Matthias Kaehlcke
  0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2010-01-11 10:12 UTC (permalink / raw)
  To: Matthias Kaehlcke; +Cc: barebox

On Sun, Jan 10, 2010 at 12:28:52AM +0100, Matthias Kaehlcke wrote:
> Added ethernet driver for EP93xx SoCs
> 
> Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
> ---
>  drivers/net/Kconfig  |    5 +
>  drivers/net/Makefile |    1 +
>  drivers/net/ep93xx.c |  686 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/net/ep93xx.h |  155 ++++++++++++
>  include/common.h     |    1 +
>  5 files changed, 848 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/ep93xx.c
>  create mode 100644 drivers/net/ep93xx.h
> 
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index ed7656e..0955562 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -64,6 +64,11 @@ config DRIVER_NET_FEC_IMX
>  	depends on ARCH_HAS_FEC_IMX
>  	select MIIPHY
>  
> +config DRIVER_NET_EP93XX
> +	bool "EP93xx Ethernet driver"
> +	depends on ARCH_EP93XX
> +	select MIIPHY
> +
>  config DRIVER_NET_MACB
>  	bool "macb Ethernet driver"
>  	depends on ARCH_AT91
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 6751920..1b6f104 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRIVER_NET_NETX)		+= netx_eth.o
>  obj-$(CONFIG_DRIVER_NET_AT91_ETHER)	+= at91_ether.o
>  obj-$(CONFIG_DRIVER_NET_MPC5200)	+= fec_mpc5200.o
>  obj-$(CONFIG_DRIVER_NET_FEC_IMX)	+= fec_imx.o
> +obj-$(CONFIG_DRIVER_NET_EP93XX)		+= ep93xx.o
>  obj-$(CONFIG_DRIVER_NET_MACB)		+= macb.o
>  obj-$(CONFIG_DRIVER_NET_TAP)		+= tap.o
>  obj-$(CONFIG_MIIPHY)			+= miiphy.o
> diff --git a/drivers/net/ep93xx.c b/drivers/net/ep93xx.c
> new file mode 100644
> index 0000000..63a0d1b
> --- /dev/null
> +++ b/drivers/net/ep93xx.c

[snip]

> +
> +/**
> + * Copy a frame of data from the MAC into the protocol layer for further
> + * processing.
> + *
> + * TODO: Enhance this to deal with as many packets as are available at
> + * the MAC at one time? */

Probably not. I do not know what the network stack does when NetReceive
is called multiple times. Even if it does handle it I do not expect any
performance gains.

> +static int ep93xx_eth_rcv_packet(struct eth_device *edev)
> +{
> +	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
> +	struct mac_regs *regs = ep93xx_get_regs(edev);
> +	int ret = ETH_STATUS_FAILURE;
> +
> +	pr_debug("+ep93xx_eth_rcv_packet\n");
> +
> +	if (RX_STATUS_RFP(priv->rx_sq.current)) {
> +		if (RX_STATUS_RWE(priv->rx_sq.current)) {
> +			/*
> +			 * We have a good frame. Extract the frame's length
> +			 * from the current rx_status_queue entry, and copy
> +			 * the frame's data into NetRxPackets[] of the
> +			 * protocol stack. We track the total number of
> +			 * bytes in the frame (nbytes_frame) which will be
> +			 * used when we pass the data off to the protocol
> +			 * layer via NetReceive().
> +			 */
> +			NetReceive((uchar *)priv->rx_dq.current->word1,
> +				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
> +			pr_debug("reporting %d bytes...\n",
> +				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
> +
> +			ret = ETH_STATUS_SUCCESS;
> +
> +		} else {
> +			/* Do we have an erroneous packet? */
> +			pr_err("packet rx error, status %08X %08X\n",
> +				priv->rx_sq.current->word1,
> +				priv->rx_sq.current->word2);
> +			dump_rx_descriptor_queue();
> +			dump_rx_status_queue();
> +		}
> +
> +		/*
> +		 * Clear the associated status queue entry, and
> +		 * increment our current pointers to the next RX
> +		 * descriptor and status queue entries (making sure
> +		 * we wrap properly).
> +		 */
> +		memset((void *)priv->rx_sq.current, 0,
> +			sizeof(struct rx_status));
> +
> +		priv->rx_sq.current++;
> +		if (priv->rx_sq.current >= priv->rx_sq.end)
> +			priv->rx_sq.current = priv->rx_sq.base;
> +
> +		priv->rx_dq.current++;
> +		if (priv->rx_dq.current >= priv->rx_dq.end)
> +			priv->rx_dq.current = priv->rx_dq.base;
> +
> +		/*
> +		 * Finally, return the RX descriptor and status entries
> +		 * back to the MAC engine, and loop again, checking for
> +		 * more descriptors to process.
> +		 */
> +		writel(1, &regs->rxdqenq);
> +		writel(1, &regs->rxstsqenq);
> +	} else {
> +		ret = ETH_STATUS_SUCCESS;
> +	}
> +
> +	pr_debug("-ep93xx_eth_rcv_packet %d\n", ret);
> +
> +	return ret;
> +}
> +
> +/**
> + * Send a block of data via ethernet.
> + *
> + * TODO: Enhance this to deal with as much data as are available at one time? */

You are only given one packet, so you can't send more here.

> +static int ep93xx_eth_send_packet(struct eth_device *edev,
> +				void *packet, int length)
> +{
> +	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
> +	struct mac_regs *regs = ep93xx_get_regs(edev);
> +	int ret = ETH_STATUS_FAILURE;
> +
> +	pr_debug("+ep93xx_eth_send_packet\n");
> +
> +	/*
> +	 * Initialize the TX descriptor queue with the new packet's info.
> +	 * Clear the associated status queue entry. Enqueue the packet
> +	 * to the MAC for transmission.
> +	 */
> +
> +	/* set buffer address */
> +	priv->tx_dq.current->word1 = (uint32_t)packet;
> +
> +	/* set buffer length and EOF bit */
> +	priv->tx_dq.current->word2 = length | TX_DESC_EOF;
> +
> +	/* clear tx status */
> +	priv->tx_sq.current->word1 = 0;
> +
> +	/* enqueue the TX descriptor */
> +	writel(1, &regs->txdqenq);
> +
> +	/* wait for the frame to become processed */
> +	while (!TX_STATUS_TXFP(priv->tx_sq.current))
> +		; /* noop */
> +
> +	if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
> +		pr_err("packet tx error, status %08X\n",
> +			priv->tx_sq.current->word1);
> +		dump_tx_descriptor_queue();
> +		dump_tx_status_queue();
> +
> +		/* TODO: Add better error handling? */
> +		goto eth_send_failed_0;
> +	}
> +
> +	ret = ETH_STATUS_SUCCESS;
> +	/* Fall through */
> +
> +eth_send_failed_0:
> +	pr_debug("-ep93xx_eth_send_packet %d\n", ret);
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * EP93xx ethernet MII functionality.
> + */
> +
> +/**
> + * Maximum MII address we support
> + */
> +#define MII_ADDRESS_MAX			(31)
> +
> +/**
> + * Maximum MII register address we support
> + */
> +#define MII_REGISTER_MAX		(31)
> +
> +/**
> + * Ethernet MII interface return values for public functions.
> + */
> +enum mii_status {
> +	MII_STATUS_SUCCESS = 0,
> +	MII_STATUS_FAILURE = 1,
> +};
> +
> +/**
> + * Read a 16-bit value from an MII register.
> + */
> +static int ep93xx_phy_read(struct miiphy_device *mdev, uint8_t phy_addr,
> +			uint8_t phy_reg, uint16_t *value)
> +{
> +	struct mac_regs *regs = ep93xx_get_regs(mdev->edev);
> +	int ret = MII_STATUS_FAILURE;
> +	uint32_t self_ctl;
> +
> +	pr_debug("+ep93xx_phy_read\n");
> +
> +	/*
> +	 * Save the current SelfCTL register value.  Set MAC to suppress
> +	 * preamble bits.  Wait for any previous MII command to complete
> +	 * before issuing the new command.
> +	 */
> +	self_ctl = readl(&regs->selfctl);
> +#if defined(CONFIG_MII_SUPPRESS_PREAMBLE) /* TODO */
> +	writel(self_ctl & ~(1 << 8), &regs->selfctl);
> +#endif	/* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
> +
> +	while (readl(&regs->miists) & MIISTS_BUSY)
> +		; /* noop */
> +
> +	/*
> +	 * Issue the MII 'read' command.  Wait for the command to complete.
> +	 * Read the MII data value.
> +	 */
> +	writel(MIICMD_OPCODE_READ | ((uint32_t)phy_addr << 5) |
> +		(uint32_t)phy_reg, &regs->miicmd);
> +	while (readl(&regs->miists) & MIISTS_BUSY)
> +		; /* noop */
> +
> +	*value = (unsigned short)readl(&regs->miidata);
> +
> +	/* Restore the saved SelfCTL value and return. */
> +	writel(self_ctl, &regs->selfctl);
> +
> +	ret = MII_STATUS_SUCCESS;
> +	/* Fall through */
> +
> +	pr_debug("-ep93xx_phy_read\n");
> +	return ret;

You can return 0 unconditionally here, the function never returns an
error. Please remove the MII_STATUS_* and ETH_STATUS_* macros. If we
ever decide add timeouts to the while loops -ETIMEDOUT would be the
correct return value, not 1.

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH] Add EP93xx ethernet driver [rev2]
  2010-01-11 10:12 ` Sascha Hauer
@ 2010-01-11 21:27   ` Matthias Kaehlcke
  0 siblings, 0 replies; 3+ messages in thread
From: Matthias Kaehlcke @ 2010-01-11 21:27 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox

Added ethernet driver for EP93xx SoCs

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
---

Changes with respect to rev1:

 * remove TODO comments about impossible enhancements
 * remove MII_STATUS_* and ETH_STATUS_* macros

 drivers/net/Kconfig  |    5 +
 drivers/net/Makefile |    1 +
 drivers/net/ep93xx.c |  676 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ep93xx.h |  147 +++++++++++
 include/common.h     |    1 +
 5 files changed, 830 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/ep93xx.c
 create mode 100644 drivers/net/ep93xx.h

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ed7656e..0955562 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -64,6 +64,11 @@ config DRIVER_NET_FEC_IMX
 	depends on ARCH_HAS_FEC_IMX
 	select MIIPHY
 
+config DRIVER_NET_EP93XX
+	bool "EP93xx Ethernet driver"
+	depends on ARCH_EP93XX
+	select MIIPHY
+
 config DRIVER_NET_MACB
 	bool "macb Ethernet driver"
 	depends on ARCH_AT91
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6751920..1b6f104 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DRIVER_NET_NETX)		+= netx_eth.o
 obj-$(CONFIG_DRIVER_NET_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_DRIVER_NET_MPC5200)	+= fec_mpc5200.o
 obj-$(CONFIG_DRIVER_NET_FEC_IMX)	+= fec_imx.o
+obj-$(CONFIG_DRIVER_NET_EP93XX)		+= ep93xx.o
 obj-$(CONFIG_DRIVER_NET_MACB)		+= macb.o
 obj-$(CONFIG_DRIVER_NET_TAP)		+= tap.o
 obj-$(CONFIG_MIIPHY)			+= miiphy.o
diff --git a/drivers/net/ep93xx.c b/drivers/net/ep93xx.c
new file mode 100644
index 0000000..aa1a005
--- /dev/null
+++ b/drivers/net/ep93xx.c
@@ -0,0 +1,676 @@
+/*
+ * Cirrus Logic EP93xx ethernet MAC / MII driver.
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver,
+ * which is
+ *
+ * (C) Copyright 2002 2003
+ * Adam Bezanson, Network Audio Technologies, Inc.
+ * <bezanson@netaudiotech.com>
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <init.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <linux/types.h>
+#include <mach/ep93xx-regs.h>
+#include "ep93xx.h"
+
+static int ep93xx_eth_send_packet(struct eth_device *edev,
+				void *packet, int length);
+static int ep93xx_eth_rcv_packet(struct eth_device *edev);
+
+static int ep93xx_phy_read(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t *value);
+static int ep93xx_phy_write(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t value);
+
+static inline struct ep93xx_eth_priv *ep93xx_get_priv(struct eth_device *edev)
+{
+	return (struct ep93xx_eth_priv *)edev->priv;
+}
+
+static inline struct mac_regs *ep93xx_get_regs(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+
+	return priv->regs;
+}
+
+#if defined(EP93XX_MAC_DEBUG)
+/**
+ * Dump ep93xx_mac values to the terminal.
+ */
+inline void dump_dev(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_dev()\n");
+	printf("  rx_dq.base	     %08X\n", priv->rx_dq.base);
+	printf("  rx_dq.current	     %08X\n", priv->rx_dq.current);
+	printf("  rx_dq.end	     %08X\n", priv->rx_dq.end);
+	printf("  rx_sq.base	     %08X\n", priv->rx_sq.base);
+	printf("  rx_sq.current	     %08X\n", priv->rx_sq.current);
+	printf("  rx_sq.end	     %08X\n", priv->rx_sq.end);
+
+	for (i = 0; i < NUMRXDESC; i++)
+		printf("  rx_buffer[%2.d]      %08X\n", i, NetRxPackets[i]);
+
+	printf("  tx_dq.base	     %08X\n", priv->tx_dq.base);
+	printf("  tx_dq.current	     %08X\n", priv->tx_dq.current);
+	printf("  tx_dq.end	     %08X\n", priv->tx_dq.end);
+	printf("  tx_sq.base	     %08X\n", priv->tx_sq.base);
+	printf("  tx_sq.current	     %08X\n", priv->tx_sq.current);
+	printf("  tx_sq.end	     %08X\n", priv->tx_sq.end);
+}
+
+/**
+ * Dump all RX descriptor queue entries to the terminal.
+ */
+inline void dump_rx_descriptor_queue(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_rx_descriptor_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMRXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->rx_dq.base + i),
+			(priv->rx_dq.base + i)->word1,
+			(priv->rx_dq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all RX status queue entries to the terminal.
+ */
+inline void dump_rx_status_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_rx_status_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMRXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->rx_sq.base + i),
+			(priv->rx_sq.base + i)->word1,
+			(priv->rx_sq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all TX descriptor queue entries to the terminal.
+ */
+inline void dump_tx_descriptor_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_tx_descriptor_queue()\n");
+	printf("  descriptor address	 word1		 word2\n");
+	for (i = 0; i < NUMTXDESC; i++) {
+		printf("  [ %08X ]	     %08X	 %08X\n",
+			(priv->tx_dq.base + i),
+			(priv->tx_dq.base + i)->word1,
+			(priv->tx_dq.base + i)->word2);
+	}
+}
+
+/**
+ * Dump all TX status queue entries to the terminal.
+ */
+inline void dump_tx_status_queue(void)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	int i;
+
+	printf("\ndump_tx_status_queue()\n");
+	printf("  descriptor address	 word1\n");
+	for (i = 0; i < NUMTXDESC; i++) {
+		printf("  [ %08X ]	     %08X\n",
+			(priv->rx_sq.base + i),
+			(priv->rx_sq.base + i)->word1);
+	}
+}
+#else
+#define dump_dev(x)
+#define dump_rx_descriptor_queue()
+#define dump_rx_status_queue()
+#define dump_tx_descriptor_queue()
+#define dump_tx_status_queue()
+#endif	/* defined(EP93XX_MAC_DEBUG) */
+
+/**
+ * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
+ * it's cleared.
+ */
+static void ep93xx_eth_reset(struct eth_device *edev)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	uint32_t value;
+
+	pr_debug("+ep93xx_eth_reset\n");
+
+	value = readl(&regs->selfctl);
+	value |= SELFCTL_RESET;
+	writel(value, &regs->selfctl);
+
+	while (readl(&regs->selfctl) & SELFCTL_RESET)
+		; /* noop */
+
+	pr_debug("-ep93xx_eth_reset\n");
+}
+
+static int ep93xx_eth_init_dev(struct eth_device *edev)
+{
+	pr_debug("+ep93xx_eth_init_dev\n");
+
+	pr_debug("-ep93xx_eth_init_dev\n");
+
+	return 0;
+}
+
+static int ep93xx_eth_open(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int i;
+
+	pr_debug("+ep93xx_eth_open\n");
+
+	ep93xx_eth_reset(edev);
+
+	/* Reset the descriptor queues' current and end address values */
+	priv->tx_dq.current = priv->tx_dq.base;
+	priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);
+
+	priv->tx_sq.current = priv->tx_sq.base;
+	priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);
+
+	priv->rx_dq.current = priv->rx_dq.base;
+	priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);
+
+	priv->rx_sq.current = priv->rx_sq.base;
+	priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);
+
+	/*
+	 * Set the transmit descriptor and status queues' base address,
+	 * current address, and length registers.  Set the maximum frame
+	 * length and threshold. Enable the transmit descriptor processor.
+	 */
+	writel((uint32_t)priv->tx_dq.base, &regs->txdq.badd);
+	writel((uint32_t)priv->tx_dq.base, &regs->txdq.curadd);
+	writel(sizeof(struct tx_descriptor) * NUMTXDESC, &regs->txdq.blen);
+
+	writel((uint32_t)priv->tx_sq.base, &regs->txstsq.badd);
+	writel((uint32_t)priv->tx_sq.base, &regs->txstsq.curadd);
+	writel(sizeof(struct tx_status) * NUMTXDESC, &regs->txstsq.blen);
+
+	writel(0x00040000, &regs->txdthrshld);
+	writel(0x00040000, &regs->txststhrshld);
+
+	writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &regs->maxfrmlen);
+	writel(BMCTL_TXEN, &regs->bmctl);
+
+	/*
+	 * Set the receive descriptor and status queues' base address,
+	 * current address, and length registers.  Enable the receive
+	 * descriptor processor.
+	 */
+	writel((uint32_t)priv->rx_dq.base, &regs->rxdq.badd);
+	writel((uint32_t)priv->rx_dq.base, &regs->rxdq.curadd);
+	writel(sizeof(struct rx_descriptor) * NUMRXDESC, &regs->rxdq.blen);
+
+	writel((uint32_t)priv->rx_sq.base, &regs->rxstsq.badd);
+	writel((uint32_t)priv->rx_sq.base, &regs->rxstsq.curadd);
+	writel(sizeof(struct rx_status) * NUMRXDESC, &regs->rxstsq.blen);
+
+	writel(0x00040000, &regs->rxdthrshld);
+
+	writel(BMCTL_RXEN, &regs->bmctl);
+
+	writel(0x00040000, &regs->rxststhrshld);
+
+	/* Wait until the receive descriptor processor is active */
+	while (!(readl(&regs->bmsts) & BMSTS_RXACT))
+		; /* noop */
+
+	/*
+	 * Initialize the RX descriptor queue. Clear the TX descriptor queue.
+	 * Clear the RX and TX status queues. Enqueue the RX descriptor and
+	 * status entries to the MAC.
+	 */
+	for (i = 0; i < NUMRXDESC; i++) {
+		/* set buffer address */
+		(priv->rx_dq.base + i)->word1 = (uint32_t)NetRxPackets[i];
+
+		/* set buffer length, clear buffer index and NSOF */
+		(priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
+	}
+
+	memset(priv->tx_dq.base, 0,
+		(sizeof(struct tx_descriptor) * NUMTXDESC));
+	memset(priv->rx_sq.base, 0,
+		(sizeof(struct rx_status) * NUMRXDESC));
+	memset(priv->tx_sq.base, 0,
+		(sizeof(struct tx_status) * NUMTXDESC));
+
+	writel(NUMRXDESC, &regs->rxdqenq);
+	writel(NUMRXDESC, &regs->rxstsqenq);
+
+	/* Turn on RX and TX */
+	writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
+		RXCTL_RCRCA | RXCTL_MA, &regs->rxctl);
+	writel(TXCTL_STXON, &regs->txctl);
+
+	/* Dump data structures if we're debugging */
+	dump_dev();
+	dump_rx_descriptor_queue();
+	dump_rx_status_queue();
+	dump_tx_descriptor_queue();
+	dump_tx_status_queue();
+
+	pr_debug("-ep93xx_eth_open\n");
+
+	return 0;
+}
+
+/**
+ * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
+ * registers.
+ */
+static void ep93xx_eth_halt(struct eth_device *edev)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+
+	pr_debug("+ep93xx_eth_halt\n");
+
+	writel(0x00000000, &regs->rxctl);
+	writel(0x00000000, &regs->txctl);
+
+	pr_debug("-ep93xx_eth_halt\n");
+}
+
+static int ep93xx_eth_get_ethaddr(struct eth_device *edev,
+				unsigned char *mac_addr)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	uint32_t value;
+
+	value = readl(&regs->indad);
+	mac_addr[0] = value & 0xFF;
+	mac_addr[1] = (value >> 8) & 0xFF;
+	mac_addr[2] = (value >> 16) & 0xFF;
+	mac_addr[3] = (value >> 24) & 0xFF;
+
+	value = readl(&regs->indad_upper);
+	mac_addr[4] = value & 0xFF;
+	mac_addr[5] = (value >> 8) & 0xFF;
+
+	return 0;
+}
+
+static int ep93xx_eth_set_ethaddr(struct eth_device *edev,
+				unsigned char *mac_addr)
+{
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+
+	writel(AFP_IAPRIMARY, &regs->afp);
+
+	writel(mac_addr[0] | (mac_addr[1] << 8) |
+		(mac_addr[2] << 16) | (mac_addr[3] << 24),
+		&regs->indad);
+	writel(mac_addr[4] | (mac_addr[5] << 8), &regs->indad_upper);
+
+	return 0;
+}
+
+static int ep93xx_eth_probe(struct device_d *dev)
+{
+	struct eth_device *edev;
+	struct ep93xx_eth_priv *priv;
+	int ret = -1;
+
+	pr_debug("ep93xx_eth_probe()\n");
+
+	edev = xzalloc(sizeof(struct eth_device) +
+		sizeof(struct ep93xx_eth_priv));
+	dev->type_data = edev;
+	edev->priv = (struct ep93xx_eth_priv *)(edev + 1);
+
+	priv = edev->priv;
+	priv->regs = (struct mac_regs *)MAC_BASE;
+
+	edev->init = ep93xx_eth_init_dev;
+	edev->open = ep93xx_eth_open;
+	edev->send = ep93xx_eth_send_packet;
+	edev->recv = ep93xx_eth_rcv_packet;
+	edev->halt = ep93xx_eth_halt;
+	edev->get_ethaddr = ep93xx_eth_get_ethaddr;
+	edev->set_ethaddr = ep93xx_eth_set_ethaddr;
+
+	priv->miiphy.read = ep93xx_phy_read;
+	priv->miiphy.write = ep93xx_phy_write;
+	priv->miiphy.address = 0;
+	priv->miiphy.flags = 0;
+
+	priv->tx_dq.base = calloc(NUMTXDESC,
+				sizeof(struct tx_descriptor));
+	if (priv->tx_dq.base == NULL) {
+		pr_err("calloc() failed: tx_dq.base");
+		goto eth_probe_failed_0;
+	}
+
+	priv->tx_sq.base = calloc(NUMTXDESC,
+				sizeof(struct tx_status));
+	if (priv->tx_sq.base == NULL) {
+		pr_err("calloc() failed: tx_sq.base");
+		goto eth_probe_failed_1;
+	}
+
+	priv->rx_dq.base = calloc(NUMRXDESC,
+				sizeof(struct rx_descriptor));
+	if (priv->rx_dq.base == NULL) {
+		pr_err("calloc() failed: rx_dq.base");
+		goto eth_probe_failed_2;
+	}
+
+	priv->rx_sq.base = calloc(NUMRXDESC,
+				sizeof(struct rx_status));
+	if (priv->rx_sq.base == NULL) {
+		pr_err("calloc() failed: rx_sq.base");
+		goto eth_probe_failed_3;
+	}
+
+	miiphy_register(&priv->miiphy);
+	eth_register(edev);
+
+	ret = 0;
+
+	goto eth_probe_done;
+
+eth_probe_failed_3:
+	free(priv->rx_dq.base);
+	/* Fall through */
+
+eth_probe_failed_2:
+	free(priv->tx_sq.base);
+	/* Fall through */
+
+eth_probe_failed_1:
+	free(priv->tx_dq.base);
+	/* Fall through */
+
+eth_probe_failed_0:
+	/* Fall through */
+
+eth_probe_done:
+	return ret;
+}
+
+/**
+ * Copy a frame of data from the MAC into the protocol layer for further
+ * processing.
+ */
+static int ep93xx_eth_rcv_packet(struct eth_device *edev)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int ret = -1;
+
+	pr_debug("+ep93xx_eth_rcv_packet\n");
+
+	if (RX_STATUS_RFP(priv->rx_sq.current)) {
+		if (RX_STATUS_RWE(priv->rx_sq.current)) {
+			/*
+			 * We have a good frame. Extract the frame's length
+			 * from the current rx_status_queue entry, and copy
+			 * the frame's data into NetRxPackets[] of the
+			 * protocol stack. We track the total number of
+			 * bytes in the frame (nbytes_frame) which will be
+			 * used when we pass the data off to the protocol
+			 * layer via NetReceive().
+			 */
+			NetReceive((uchar *)priv->rx_dq.current->word1,
+				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
+			pr_debug("reporting %d bytes...\n",
+				RX_STATUS_FRAME_LEN(priv->rx_sq.current));
+
+			ret = 0;
+
+		} else {
+			/* Do we have an erroneous packet? */
+			pr_err("packet rx error, status %08X %08X\n",
+				priv->rx_sq.current->word1,
+				priv->rx_sq.current->word2);
+			dump_rx_descriptor_queue();
+			dump_rx_status_queue();
+		}
+
+		/*
+		 * Clear the associated status queue entry, and
+		 * increment our current pointers to the next RX
+		 * descriptor and status queue entries (making sure
+		 * we wrap properly).
+		 */
+		memset((void *)priv->rx_sq.current, 0,
+			sizeof(struct rx_status));
+
+		priv->rx_sq.current++;
+		if (priv->rx_sq.current >= priv->rx_sq.end)
+			priv->rx_sq.current = priv->rx_sq.base;
+
+		priv->rx_dq.current++;
+		if (priv->rx_dq.current >= priv->rx_dq.end)
+			priv->rx_dq.current = priv->rx_dq.base;
+
+		/*
+		 * Finally, return the RX descriptor and status entries
+		 * back to the MAC engine, and loop again, checking for
+		 * more descriptors to process.
+		 */
+		writel(1, &regs->rxdqenq);
+		writel(1, &regs->rxstsqenq);
+	} else {
+		ret = 0;
+	}
+
+	pr_debug("-ep93xx_eth_rcv_packet %d\n", ret);
+
+	return ret;
+}
+
+/**
+ * Send a block of data via ethernet.
+ */
+static int ep93xx_eth_send_packet(struct eth_device *edev,
+				void *packet, int length)
+{
+	struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev);
+	struct mac_regs *regs = ep93xx_get_regs(edev);
+	int ret = -1;
+
+	pr_debug("+ep93xx_eth_send_packet\n");
+
+	/*
+	 * Initialize the TX descriptor queue with the new packet's info.
+	 * Clear the associated status queue entry. Enqueue the packet
+	 * to the MAC for transmission.
+	 */
+
+	/* set buffer address */
+	priv->tx_dq.current->word1 = (uint32_t)packet;
+
+	/* set buffer length and EOF bit */
+	priv->tx_dq.current->word2 = length | TX_DESC_EOF;
+
+	/* clear tx status */
+	priv->tx_sq.current->word1 = 0;
+
+	/* enqueue the TX descriptor */
+	writel(1, &regs->txdqenq);
+
+	/* wait for the frame to become processed */
+	while (!TX_STATUS_TXFP(priv->tx_sq.current))
+		; /* noop */
+
+	if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
+		pr_err("packet tx error, status %08X\n",
+			priv->tx_sq.current->word1);
+		dump_tx_descriptor_queue();
+		dump_tx_status_queue();
+
+		/* TODO: Add better error handling? */
+		goto eth_send_failed_0;
+	}
+
+	ret = 0;
+	/* Fall through */
+
+eth_send_failed_0:
+	pr_debug("-ep93xx_eth_send_packet %d\n", ret);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * EP93xx ethernet MII functionality.
+ */
+
+/**
+ * Maximum MII address we support
+ */
+#define MII_ADDRESS_MAX			(31)
+
+/**
+ * Maximum MII register address we support
+ */
+#define MII_REGISTER_MAX		(31)
+
+/**
+ * Read a 16-bit value from an MII register.
+ */
+static int ep93xx_phy_read(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t *value)
+{
+	struct mac_regs *regs = ep93xx_get_regs(mdev->edev);
+	int ret = -1;
+	uint32_t self_ctl;
+
+	pr_debug("+ep93xx_phy_read\n");
+
+	/*
+	 * Save the current SelfCTL register value.  Set MAC to suppress
+	 * preamble bits.  Wait for any previous MII command to complete
+	 * before issuing the new command.
+	 */
+	self_ctl = readl(&regs->selfctl);
+#if defined(CONFIG_MII_SUPPRESS_PREAMBLE) /* TODO */
+	writel(self_ctl & ~(1 << 8), &regs->selfctl);
+#endif	/* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
+
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/*
+	 * Issue the MII 'read' command.  Wait for the command to complete.
+	 * Read the MII data value.
+	 */
+	writel(MIICMD_OPCODE_READ | ((uint32_t)phy_addr << 5) |
+		(uint32_t)phy_reg, &regs->miicmd);
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	*value = (unsigned short)readl(&regs->miidata);
+
+	/* Restore the saved SelfCTL value and return. */
+	writel(self_ctl, &regs->selfctl);
+
+	ret = 0;
+
+	pr_debug("-ep93xx_phy_read\n");
+
+	return ret;
+}
+
+/**
+ * Write a 16-bit value to an MII register.
+ */
+static int ep93xx_phy_write(struct miiphy_device *mdev, uint8_t phy_addr,
+			uint8_t phy_reg, uint16_t value)
+{
+	struct mac_regs *regs = ep93xx_get_regs(mdev->edev);
+	int ret = -1;
+	uint32_t self_ctl;
+
+	pr_debug("+ep93xx_phy_write\n");
+
+	/*
+	 * Save the current SelfCTL register value.  Set MAC to suppress
+	 * preamble bits.  Wait for any previous MII command to complete
+	 * before issuing the new command.
+	 */
+	self_ctl = readl(&regs->selfctl);
+#if defined(CONFIG_MII_SUPPRESS_PREAMBLE) /* TODO */
+	writel(self_ctl & ~(1 << 8), &regs->selfctl);
+#endif	/* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
+
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/* Issue the MII 'write' command.  Wait for the command to complete. */
+	writel((uint32_t)value, &regs->miidata);
+	writel(MIICMD_OPCODE_WRITE | ((uint32_t)phy_addr << 5) | phy_reg,
+		&regs->miicmd);
+	while (readl(&regs->miists) & MIISTS_BUSY)
+		; /* noop */
+
+	/* Restore the saved SelfCTL value and return. */
+	writel(self_ctl, &regs->selfctl);
+
+	ret = 0;
+
+	pr_debug("-ep93xx_phy_write\n");
+
+	return ret;
+}
+
+static struct driver_d ep93xx_eth_driver = {
+	.name  = "ep93xx_eth",
+	.probe = ep93xx_eth_probe,
+};
+
+static int ep93xx_eth_init(void)
+{
+	register_driver(&ep93xx_eth_driver);
+	return 0;
+}
+
+device_initcall(ep93xx_eth_init);
diff --git a/drivers/net/ep93xx.h b/drivers/net/ep93xx.h
new file mode 100644
index 0000000..ae45c54
--- /dev/null
+++ b/drivers/net/ep93xx.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2004, 2005
+ * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ETH_H
+#define _ETH_H
+
+#include <net.h>
+
+/**
+ * #define this to dump device status and queue info during initialization and
+ * following errors.
+ */
+#undef EP93XX_MAC_DEBUG
+
+/**
+ * Number of descriptor and status entries in our RX queues.
+ * It must be power of 2 !
+ */
+#define NUMRXDESC		PKTBUFSRX
+
+/**
+ * Number of descriptor and status entries in our TX queues.
+ */
+#define NUMTXDESC		1
+
+/**
+ * 944 = (1024 - 64) - 16, Fifo size - Minframesize - 16 (Chip FACT)
+ */
+#define TXSTARTMAX		944
+
+/**
+ * Receive descriptor queue entry
+ */
+struct rx_descriptor {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+/**
+ * Receive status queue entry
+ */
+struct rx_status {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+#define RX_STATUS_RWE(rx_status) ((rx_status->word1 >> 30) & 0x01)
+#define RX_STATUS_RFP(rx_status) ((rx_status->word1 >> 31) & 0x01)
+#define RX_STATUS_FRAME_LEN(rx_status) (rx_status->word2 & 0xFFFF)
+
+
+/**
+ * Transmit descriptor queue entry
+ */
+struct tx_descriptor {
+	uint32_t word1;
+	uint32_t word2;
+} __attribute__((packed));
+
+#define TX_DESC_EOF (1 << 31)
+
+/**
+ * Transmit status queue entry
+ */
+struct tx_status {
+	uint32_t word1;
+} __attribute__((packed));
+
+#define TX_STATUS_TXWE(tx_status) (((tx_status)->word1 >> 30) & 0x01)
+#define TX_STATUS_TXFP(tx_status) (((tx_status)->word1 >> 31) & 0x01)
+
+/**
+ * Transmit descriptor queue
+ */
+struct tx_descriptor_queue {
+	struct tx_descriptor *base;
+	struct tx_descriptor *current;
+	struct tx_descriptor *end;
+};
+
+/**
+ * Transmit status queue
+ */
+struct tx_status_queue {
+	struct tx_status *base;
+	volatile struct tx_status *current;
+	struct tx_status *end;
+};
+
+/**
+ * Receive descriptor queue
+ */
+struct rx_descriptor_queue {
+	struct rx_descriptor *base;
+	struct rx_descriptor *current;
+	struct rx_descriptor *end;
+};
+
+/**
+ * Receive status queue
+ */
+struct rx_status_queue {
+	struct rx_status *base;
+	volatile struct rx_status *current;
+	struct rx_status *end;
+};
+
+/**
+ * EP93xx MAC private data structure
+ */
+struct ep93xx_eth_priv {
+	struct mac_regs			*regs;
+
+	struct rx_descriptor_queue	rx_dq;
+	struct rx_status_queue		rx_sq;
+	void				*rx_buffer[NUMRXDESC];
+
+	struct tx_descriptor_queue	tx_dq;
+	struct tx_status_queue		tx_sq;
+
+	struct miiphy_device miiphy;
+};
+
+#endif
diff --git a/include/common.h b/include/common.h
index 0c49d95..2b40954 100644
--- a/include/common.h
+++ b/include/common.h
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/stddef.h>
 #include <asm/common.h>
 
 #define pr_info(fmt, arg...)	printf(fmt, ##arg)
-- 
1.6.3.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2010-01-11 21:31 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-01-09 23:28 [PATCH 2/5] Add EP93xx ethernet driver Matthias Kaehlcke
2010-01-11 10:12 ` Sascha Hauer
2010-01-11 21:27   ` [PATCH] Add EP93xx ethernet driver [rev2] Matthias Kaehlcke

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox