mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <matthias@kaehlcke.net>
To: barebox@lists.infradead.org
Subject: [PATCH 4/5] Add PrimeCell PL010 serial driver
Date: Tue, 12 Jan 2010 20:30:51 +0100	[thread overview]
Message-ID: <20100112193051.GP14051@darwin> (raw)

Added driver for ARM PrimeCell PL010 UART

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
---
 drivers/serial/Kconfig        |    7 ++
 drivers/serial/Makefile       |    2 +-
 drivers/serial/serial_pl010.c |  172 +++++++++++++++++++++++++++++++++++++++++
 drivers/serial/serial_pl010.h |  100 ++++++++++++++++++++++++
 4 files changed, 280 insertions(+), 1 deletions(-)
 create mode 100644 drivers/serial/serial_pl010.c
 create mode 100644 drivers/serial/serial_pl010.h

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b0ff5fa..8a5056b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -47,6 +47,13 @@ config DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
 	help
 	  Say Y here if you are using OMAP extensions to NS16550
 
+config DRIVER_SERIAL_PL010
+	depends on ARCH_EP93XX
+	default y
+	bool "ARM AMBA PL010 support"
+	help
+	  Enable this to get support for AMBA PL010 based serial devices
+
 config DRIVER_SERIAL_S3C24X0
 	bool "Samsung S3C24X0 serial driver"
 	depends on ARCH_S3C24xx
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 8ab680d..9f203bb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -3,7 +3,6 @@
 # s3c4510b_uart.o
 # serial_max3100.o
 # serial_pl010.o
-# serial_pl011.o
 # serial_xuartlite.o
 obj-$(CONFIG_DRIVER_SERIAL_ARM_DCC)		+= arm_dcc.o
 obj-$(CONFIG_DRIVER_SERIAL_IMX)			+= serial_imx.o
@@ -13,4 +12,5 @@ obj-$(CONFIG_DRIVER_SERIAL_LINUX_COMSOLE)	+= linux_console.o
 obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX)		+= serial_mpc5xxx.o
 obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN)		+= serial_blackfin.o
 obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
+obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
 obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)		+= serial_s3c24x0.o
diff --git a/drivers/serial/serial_pl010.c b/drivers/serial/serial_pl010.c
new file mode 100644
index 0000000..1a6366f
--- /dev/null
+++ b/drivers/serial/serial_pl010.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "serial_pl010.h"
+
+static int pl010_setbaudrate(struct console_device *cdev, int baudrate)
+{
+	struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+	unsigned int divisor;
+
+	switch (baudrate) {
+	case 9600:
+		divisor = UART_PL010_BAUD_9600;
+		break;
+
+	case 19200:
+		divisor = UART_PL010_BAUD_9600;
+		break;
+
+	case 38400:
+		divisor = UART_PL010_BAUD_38400;
+		break;
+
+	case 57600:
+		divisor = UART_PL010_BAUD_57600;
+		break;
+
+	case 115200:
+		divisor = UART_PL010_BAUD_115200;
+		break;
+
+	default:
+		divisor = UART_PL010_BAUD_38400;
+	}
+
+	writel((divisor & 0xf00) >> 8, &pl010->linctrlmid);
+	writel(divisor & 0xff, &pl010->linctrllow);
+
+	/* high register must always be written */
+	writel(readl(&pl010->linctrlhigh), &pl010->linctrlhigh);
+
+	return 0;
+}
+
+static int pl010_init_port(struct console_device *cdev)
+{
+	struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+	/*
+	 * First, disable everything.
+	 */
+	writel(0x00, &pl010->ctrl);
+
+	/*
+	 * Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
+	 */
+	writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN,
+		&pl010->linctrlhigh);
+
+	/*
+	 * Finally, enable the UART
+	 */
+	writel(UART_PL010_CR_UARTEN, &pl010->ctrl);
+
+	return 0;
+}
+
+static void pl010_putc(struct console_device *cdev, char c)
+{
+	struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+	/* Wait until there is space in the FIFO */
+	while (readl(&pl010->flag) & UART_PL010_FR_TXFF)
+		; /* noop */
+
+	/* Send the character */
+	writel(c, &pl010->data);
+}
+
+static int pl010_getc(struct console_device *cdev)
+{
+	struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+	unsigned int data;
+
+	/* Wait until there is data in the FIFO */
+	while (readl(&pl010->flag) & UART_PL010_FR_RXFE)
+		; /* noop */
+
+	data = readl(&pl010->data);
+
+	/* Check for an error flag */
+	if (data & 0xFFFFFF00) {
+		/* Clear the error */
+		writel(0xFFFFFFFF, &pl010->errclr);
+		return -1;
+	}
+
+	return (int)data;
+}
+
+static int pl010_tstc(struct console_device *cdev)
+{
+	struct pl010_struct *pl010 = (struct pl010_struct *)cdev->dev->map_base;
+
+	return !(readl(&pl010->flag) & UART_PL010_FR_RXFE);
+}
+
+static int pl010_probe(struct device_d *dev)
+{
+	struct console_device *cdev;
+
+	cdev = malloc(sizeof(struct console_device));
+	dev->type_data = cdev;
+	cdev->dev = dev;
+	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+	cdev->tstc = pl010_tstc;
+	cdev->putc = pl010_putc;
+	cdev->getc = pl010_getc;
+	cdev->setbrg = pl010_setbaudrate;
+
+	pl010_init_port(cdev);
+
+	console_register(cdev);
+
+	return 0;
+}
+
+static struct driver_d pl010_driver = {
+	.name  = "pl010_serial",
+	.probe = pl010_probe,
+};
+
+static int pl010_init(void)
+{
+	register_driver(&pl010_driver);
+
+	return 0;
+}
+
+console_initcall(pl010_init);
diff --git a/drivers/serial/serial_pl010.h b/drivers/serial/serial_pl010.h
new file mode 100644
index 0000000..6124e0e
--- /dev/null
+++ b/drivers/serial/serial_pl010.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * (C) Copyright 2003, 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct hldc_struct {
+	uint32_t ctrl;
+	uint32_t addmtchval;
+	uint32_t addmask;
+	uint32_t rxinfobuf;
+	uint32_t sts;
+};
+
+struct pl010_struct {
+	uint32_t data;
+	union {
+		uint32_t rxsts;
+		uint32_t errclr;
+	};
+	uint32_t linctrlhigh;
+	uint32_t linctrlmid;
+	uint32_t linctrllow;
+	uint32_t ctrl;
+	uint32_t flag;
+	union {
+		uint32_t intid;
+		uint32_t intclr;
+	};
+	uint32_t not_used0[2];
+	uint32_t dmactrl;
+	uint32_t not_used1[53];
+	uint32_t modemctrl;
+	uint32_t modemsts;
+	uint32_t not_used2[65];
+	struct hldc_struct hldc;
+};
+
+#define UART_PL010_RSR_OE	(1 << 3)
+#define UART_PL010_RSR_BE	(1 << 2)
+#define UART_PL010_RSR_PE	(1 << 1)
+#define UART_PL010_RSR_FE	(1 << 0)
+
+#define UART_PL010_FR_TXFE	(1 << 7)
+#define UART_PL010_FR_RXFF	(1 << 6)
+#define UART_PL010_FR_TXFF	(1 << 5)
+#define UART_PL010_FR_RXFE	(1 << 4)
+#define UART_PL010_FR_BUSY	(1 << 3)
+#define UART_PL010_FR_TMSK	(UART_PL010_FR_TXFF + UART_PL010_FR_BUSY)
+
+#define UART_PL010_CR_LPE	(1 << 7)
+#define UART_PL010_CR_RTIE	(1 << 6)
+#define UART_PL010_CR_TIE	(1 << 5)
+#define UART_PL010_CR_RIE	(1 << 4)
+#define UART_PL010_CR_MSIE	(1 << 3)
+#define UART_PL010_CR_IIRLP	(1 << 2)
+#define UART_PL010_CR_SIREN	(1 << 1)
+#define UART_PL010_CR_UARTEN	(1 << 0)
+
+#define UART_PL010_LCRH_WLEN_8	(3 << 5)
+#define UART_PL010_LCRH_WLEN_7	(2 << 5)
+#define UART_PL010_LCRH_WLEN_6	(1 << 5)
+#define UART_PL010_LCRH_WLEN_5	(0 << 5)
+#define UART_PL010_LCRH_FEN	(1 << 4)
+#define UART_PL010_LCRH_STP2	(1 << 3)
+#define UART_PL010_LCRH_EPS	(1 << 2)
+#define UART_PL010_LCRH_PEN	(1 << 1)
+#define UART_PL010_LCRH_BRK	(1 << 0)
+
+#define UART_PL010_BAUD_460800	1
+#define UART_PL010_BAUD_230400	3
+#define UART_PL010_BAUD_115200	7
+#define UART_PL010_BAUD_57600	15
+#define UART_PL010_BAUD_38400	23
+#define UART_PL010_BAUD_19200	47
+#define UART_PL010_BAUD_14400	63
+#define UART_PL010_BAUD_9600	95
+#define UART_PL010_BAUD_4800	191
+#define UART_PL010_BAUD_2400	383
+#define UART_PL010_BAUD_1200	767
-- 
1.6.3.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2010-01-12 19:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-12 19:30 Matthias Kaehlcke [this message]
  -- strict thread matches above, loose matches on Subject: below --
2010-01-09 23:29 Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100112193051.GP14051@darwin \
    --to=matthias@kaehlcke.net \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox