From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.69 #1 (Red Hat Linux)) id 1NdSJk-0005fs-Hm for barebox@lists.infradead.org; Fri, 05 Feb 2010 17:50:09 +0000 Date: Fri, 5 Feb 2010 18:49:59 +0100 From: Sascha Hauer Message-ID: <20100205174959.GA18291@pengutronix.de> References: <4B6C4678.9060007@tylerlabs.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <4B6C4678.9060007@tylerlabs.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: barebox for leopardboard To: barebox@tylerlabs.com Cc: barebox@lists.infradead.org Hi Tyler, On Fri, Feb 05, 2010 at 12:25:28PM -0400, Tyler W. Wilson wrote: > I am curious if anybody has done any work on getting barebox running on > the leopardboard, so I do not reproduce effort. > > I am especially interested in setting up a bootloader that directly > supports USB and DFU, so that I do not need to use the UART/serial port. I know nothing about the leopardboard, from googling I found out that this is a beagleboard with a camera connected to it, right? Barebox runs on the beagleboard, but unfortunately we do not have USB support for it. You would have to port the usb driver for it, then DFU should work. As a first shot you can compile the beagleboard defconfig and see how far you get. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox