mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ivo Clarysse <ivo.clarysse@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] MX25PDK: Add support for 64MiB DDR2 SDRAM
Date: Thu, 22 Apr 2010 14:37:40 +0200	[thread overview]
Message-ID: <20100422123740.GS7882@pengutronix.de> (raw)
In-Reply-To: <alpine.LRH.2.00.1004221347110.21066@localhost.localdomain>

On Thu, Apr 22, 2010 at 01:47:49PM +0200, Ivo Clarysse wrote:
> Newer Freescale 3-Stack development systems are equipped
> with 64MiB of DDR2 SDRAM, instead of the 128MiB of mDDR SDRAM
> with which earlier versions were shipped.
> 
> Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>

Ok, applied to next.

Sascha

> ---
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 10561f0..02d5db9 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -6,7 +6,8 @@ config ARCH_TEXT_BASE
>  	default 0x08f00000 if MACH_MX1ADS
>  	default 0xc0000000 if MACH_IMX21ADS
>  	default 0xa0000000 if MACH_IMX27ADS
> -	default 0x87f00000 if MACH_FREESCALE_MX25_3STACK
> +	default 0x83f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
> +	default 0x87f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
>  	default 0x87f00000 if MACH_FREESCALE_MX35_3STACK
>  	default 0xa7f00000 if MACH_PCA100
>  	default 0xa0000000 if MACH_PCM038
> @@ -300,6 +301,15 @@ config EUKREA_CPUIMX27_QUART4
>  	bool "Q4"
>  endchoice
>  endif
> +if MACH_FREESCALE_MX25_3STACK
> +choice
> +	prompt "SDRAM Type"
> +config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
> +	bool "64 MB (DDR2)"
> +config FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
> +	bool "128 MB (mDDR)"
> +endchoice
> +endif
>  endmenu
> 
>  menu "i.MX specific settings        "
> diff --git a/board/freescale-mx25-3-stack/3stack.c b/board/freescale-mx25-3-stack/3stack.c
> index 5590e55..5b802ad 100644
> --- a/board/freescale-mx25-3-stack/3stack.c
> +++ b/board/freescale-mx25-3-stack/3stack.c
> @@ -48,6 +48,27 @@ struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = {
>  	{ .ptr_type = 4, .addr = 0xb8002050, .val = 0x0000d843, },
>  	{ .ptr_type = 4, .addr = 0xb8002054, .val = 0x22252521, },
>  	{ .ptr_type = 4, .addr = 0xb8002058, .val = 0x22220a00, },
> +#if defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
> +	{ .ptr_type = 4, .addr = 0xb8001004, .val = 0x0076e83a, },
> +	{ .ptr_type = 4, .addr = 0xb8001010, .val = 0x00000304, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x92210000, },
> +	{ .ptr_type = 4, .addr = 0x80000f00, .val = 0x12344321, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0xb2210000, },
> +	{ .ptr_type = 1, .addr = 0x82000000, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x83000000, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x81000400, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x80000333, .val = 0xda, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x92210000, },
> +	{ .ptr_type = 4, .addr = 0x80000400, .val = 0x12344321, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0xa2210000, },
> +	{ .ptr_type = 4, .addr = 0x80000000, .val = 0x87654321, },
> +	{ .ptr_type = 4, .addr = 0x80000000, .val = 0x87654321, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0xb2210000, },
> +	{ .ptr_type = 1, .addr = 0x80000233, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x81000780, .val = 0xda, },
> +	{ .ptr_type = 1, .addr = 0x81000400, .val = 0xda, },
> +	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x82216080, },
> +#elif defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
>  	{ .ptr_type = 4, .addr = 0xb8001010, .val = 0x00000004, },
>  	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x92100000, },
>  	{ .ptr_type = 1, .addr = 0x80000400, .val = 0x21, },
> @@ -59,6 +80,9 @@ struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = {
>  	{ .ptr_type = 1, .addr = 0x81000000, .val = 0xff, },
>  	{ .ptr_type = 4, .addr = 0xb8001000, .val = 0x82216880, },
>  	{ .ptr_type = 4, .addr = 0xb8001004, .val = 0x00295729, },
> +#else
> +#error "Unsupported SDRAM type"
> +#endif
>  	{ .ptr_type = 4, .addr = 0x53f80008, .val = 0x20034000, },
>  };
> 
> @@ -99,7 +123,13 @@ static struct memory_platform_data sdram_pdata = {
>  static struct device_d sdram0_dev = {
>  	.name     = "mem",
>  	.map_base = IMX_SDRAM_CS0,
> +#if defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
> +	.size     = 64 * 1024 * 1024,
> +#elif defined CONFIG_FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
>  	.size     = 128 * 1024 * 1024,
> +#else
> +#error "Unsupported SDRAM type"
> +#endif
>  	.platform_data = &sdram_pdata,
>  };
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2010-04-22 12:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-14 11:29 [PATCH] " Ivo Clarysse
2010-04-16  7:56 ` Sascha Hauer
2010-04-19  8:59   ` Ivo Clarysse
2010-04-22 11:35     ` Sascha Hauer
2010-04-22 11:47       ` [PATCH v2] " Ivo Clarysse
2010-04-22 12:37         ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100422123740.GS7882@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=ivo.clarysse@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox