From: Baruch Siach <baruch@tkos.co.il>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: UBI support
Date: Thu, 8 Jul 2010 12:19:25 +0300 [thread overview]
Message-ID: <20100708091925.GF25143@jasper.tkos.co.il> (raw)
In-Reply-To: <1278335795-16289-1-git-send-email-s.hauer@pengutronix.de>
Hi Sascha,
On Mon, Jul 05, 2010 at 03:16:23PM +0200, Sascha Hauer wrote:
> The following series prepares and implements UBI for barebox. Here is a log
> while playing with UBI:
I've tested this on our i.MX25 board. Here's what I get:
barebox:/ ubiattach /dev/nand0.rootfs
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: empty MTD device detected
UBI: create volume table (copy #1)
UBI error: ubi_scan_get_free_peb: no eraseblocks found
failed to attach: error 28
The kernel is able to attach the same device as follows:
UBI: attaching mtd3 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: attached mtd3 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 122 MiB
UBI: number of good PEBs: 975
UBI: number of bad PEBs: 1
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 975
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 1/0
UBI: image sequence number: 1519924105
UBI: background thread "ubi_bgt0d" started, PID 852
Where should I look to diagnose this?
baruch
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-07-08 9:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-05 13:16 Sascha Hauer
2010-07-05 13:16 ` [PATCH 01/12] crc32: activate crc32_no_comp (needed for jffs2 and UBI) Sascha Hauer
2010-07-05 13:16 ` [PATCH 02/12] move drivers/nand to drivers/mtd/nand Sascha Hauer
2010-07-05 13:16 ` [PATCH 03/12] add rbtree support (needed for ubi) Sascha Hauer
2010-07-05 13:16 ` [PATCH 04/12] add partition mtd support Sascha Hauer
2010-07-05 13:16 ` [PATCH 05/12] cfi_flash: Do not typedef struct flash_info Sascha Hauer
2010-07-05 13:16 ` [PATCH 06/12] cfi_flash: Do not print debug info while erasing Sascha Hauer
2010-07-05 13:16 ` [PATCH 07/12] cfi_flash: Add mtd partition support for UBI Sascha Hauer
2010-07-05 13:16 ` [PATCH 08/12] devfs: only check for ioctl function when needed Sascha Hauer
2010-07-05 13:16 ` [PATCH 09/12] include stuff missing for ubi Sascha Hauer
2010-07-05 13:16 ` [PATCH 10/12] add ubi support from u-boot. Just enough to compile and scan Sascha Hauer
2010-07-05 13:16 ` [PATCH 11/12] barebox ubi changes Sascha Hauer
2010-07-05 13:16 ` [PATCH 12/12] Add UBI commands: ubiattach, ubidetach, ubimkvol, ubirmvol Sascha Hauer
2010-07-05 15:22 ` [PATCH 02/12] move drivers/nand to drivers/mtd/nand Alessandro Rubini
2010-07-06 6:31 ` Sascha Hauer
2010-07-08 9:19 ` Baruch Siach [this message]
2010-07-16 7:27 ` UBI support Sascha Hauer
2010-07-16 8:57 ` Eric Bénard
2010-07-16 12:13 ` Esben Haabendal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100708091925.GF25143@jasper.tkos.co.il \
--to=baruch@tkos.co.il \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox