mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Baruch Siach <baruch@tkos.co.il>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
Date: Thu, 12 Aug 2010 11:34:10 +0300	[thread overview]
Message-ID: <20100812083409.GD13166@jasper.tkos.co.il> (raw)
In-Reply-To: <20100810070909.GB10920@game.jcrosoft.org>

Hi Jean-Christophe

On Tue, Aug 10, 2010 at 09:09:09AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> 	sorry I do not really see what the comman do so maybe a small doc or
> 	more comment will be nice

OK. I'll add a documentation comment and resubmit.

baruch

> On 09:25 Tue 10 Aug     , Baruch Siach wrote:
> > This has only been tested on i.MX25, but should work on other i.MX chips with
> > IIM.
> > 
> > Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> > ---
> >  commands/Kconfig  |    5 ++
> >  commands/Makefile |    1 +
> >  commands/fuse.c   |  161 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 167 insertions(+), 0 deletions(-)
> >  create mode 100644 commands/fuse.c
> > 
> > diff --git a/commands/Kconfig b/commands/Kconfig
> > index 9d11a8b..eb3e48e 100644
> > --- a/commands/Kconfig
> > +++ b/commands/Kconfig
> > @@ -173,6 +173,11 @@ config CMD_MTEST_ALTERNATIVE
> >  	depends on CMD_MTEST
> >  	prompt "alternative mtest implementation"
> >  
> > +config CMD_FUSE_BLOW
> > +	tristate
> > +	depends on ARCH_IMX25 || ARCH_IMX35
> > +	prompt "fuse_blow"
> > +
> >  endmenu
> >  
> >  menu "flash                         "
> > diff --git a/commands/Makefile b/commands/Makefile
> > index 276af85..aa1c12e 100644
> > --- a/commands/Makefile
> > +++ b/commands/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_CMD_ECHO)		+= echo.o
> >  obj-$(CONFIG_CMD_MEMORY)	+= mem.o
> >  obj-$(CONFIG_CMD_LOADS)		+= s_record.o
> >  obj-$(CONFIG_CMD_MTEST)		+= memtest.o
> > +obj-$(CONFIG_CMD_FUSE_BLOW)	+= fuse.o
> >  obj-$(CONFIG_CMD_EDIT)		+= edit.o
> >  obj-$(CONFIG_CMD_EXEC)		+= exec.o
> >  obj-$(CONFIG_CMD_SLEEP)		+= sleep.o
> > diff --git a/commands/fuse.c b/commands/fuse.c
> > new file mode 100644
> > index 0000000..1c0ccd6
> > --- /dev/null
> > +++ b/commands/fuse.c
> > @@ -0,0 +1,161 @@
> > +/*
> > + * fuse.c - i.MX IIM fusebox programing and sensing
> > + *
> > + * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
> > + * 	Orex Computed Radiography
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2
> > + * as published by the Free Software Foundation.
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <common.h>
> > +#include <command.h>
> > +#include <asm/io.h>
> > +#include <mach/imx-regs.h>
> > +#include <mach/iim.h>
> > +
> > +static int do_fuse_blow(struct command *cmdtp, int argc, char *argv[])
> > +{
> > +	unsigned int bank, row, value;
> > +	int bit, ret = 0;
> > +	u8 err, stat;
> > +
> > +	if (argc != 4)
> > +		return COMMAND_ERROR_USAGE;
> > +
> > +	bank	= simple_strtoul(argv[1], NULL, 0);
> > +	row	= simple_strtoul(argv[2], NULL, 0);
> > +	value	= simple_strtoul(argv[3], NULL, 0);
> > +
> > +	if (bank > 7) {
> > +		printf("fuse_blow: invalid bank number\n");
> > +		return 1;
> > +	}
> > +
> > +	if (row > 0x3ff) {
> > +		printf("fuse_blow: invalid row offset\n");
> > +		return 1;
> > +	}
> > +
> > +	if (value > 0xff) {
> > +		printf("fuse_blow: invalid value\n");
> > +		return 1;
> > +	}
> > +
> > +	/* clear status and error registers */
> > +	writeb(3, IMX_IIM_BASE + IIM_STATM);
> > +	writeb(0xfe, IMX_IIM_BASE + IIM_ERR);
> > +
> > +	/* unprotect fuse programing */
> > +	writeb(0xaa, IMX_IIM_BASE + IIM_PREG_P);
> > +
> > +	/* upper half address register */
> > +	writeb((bank << 3) | (row >> 7), IMX_IIM_BASE + IIM_UA);
> > +
> > +	for (bit = 0; bit < 8; bit++) {
> > +		if (((value >> bit) & 1) == 0)
> > +			continue;
> > +
> > +		/* lower half address register */
> > +		writeb(((row << 1) | bit), IMX_IIM_BASE + IIM_LA);
> > +
> > +		/* start fuse programing */
> > +		writeb(0x71, IMX_IIM_BASE + IIM_FCTL);
> > +
> > +		/* wait for program done */
> > +		while ((readb(IMX_IIM_BASE + IIM_STAT) & 0x80) != 0)
> > +			;
> > +
> > +		/* clear program done status */
> > +		stat = readb(IMX_IIM_BASE + IIM_STAT);
> > +		writeb(stat, IMX_IIM_BASE + IIM_STAT);
> > +
> > +		err = readb(IMX_IIM_BASE + IIM_ERR);
> > +		if (err) {
> > +			printf("fuse_blow: bit %d program error (0x%02x)\n",
> > +					bit, err);
> > +			ret = 1;
> > +			goto out;
> > +		}
> > +	}
> > +
> > +out:
> > +	/* protect fuse programing */
> > +	writeb(0, IMX_IIM_BASE + IIM_PREG_P);
> > +	return ret;
> > +}
> > +
> > +static const __maybe_unused char cmd_fuse_blow_help[] =
> > +"Usage: fuse_blow <bank> <row> <value>\n"
> > +"Blow fuses in <bank> <row> to match <value>\n";
> > +
> > +BAREBOX_CMD_START(fuse_blow)
> > +	.cmd	= do_fuse_blow,
> > +	.usage	= "program fuse row",
> > +	BAREBOX_CMD_HELP(cmd_fuse_blow_help)
> > +BAREBOX_CMD_END
> > +
> > +static int do_fuse_sense(struct command *cmdtp, int argc, char *argv[])
> > +{
> > +	unsigned int bank, row;
> > +	u8 err, stat;
> > +
> > +	if (argc != 3)
> > +		return COMMAND_ERROR_USAGE;
> > +
> > +	bank	= simple_strtoul(argv[1], NULL, 0);
> > +	row	= simple_strtoul(argv[2], NULL, 0);
> > +
> > +	if (bank > 7) {
> > +		printf("fuse_sense: invalid bank number\n");
> > +		return 1;
> > +	}
> > +
> > +	if (row > 0x3ff) {
> > +		printf("fuse_sense: invalid row offset\n");
> > +		return 1;
> > +	}
> > +
> > +	/* clear status and error registers */
> > +	writeb(3, IMX_IIM_BASE + IIM_STATM);
> > +	writeb(0xfe, IMX_IIM_BASE + IIM_ERR);
> > +
> > +	/* upper and lower address halves */
> > +	writeb((bank << 3) | (row >> 7), IMX_IIM_BASE + IIM_UA);
> > +	writeb((row << 1) & 0xf8, IMX_IIM_BASE + IIM_LA);
> > +
> > +	/* start fuse sensing */
> > +	writeb(0x08, IMX_IIM_BASE + IIM_FCTL);
> > +
> > +	/* wait for sense done */
> > +	while ((readb(IMX_IIM_BASE + IIM_STAT) & 0x80) != 0)
> > +		;
> > +
> > +	stat =  readb(IMX_IIM_BASE + IIM_STAT);
> > +	writeb(stat, IMX_IIM_BASE + IIM_STAT);
> > +
> > +	err = readb(IMX_IIM_BASE + IIM_ERR);
> > +	if (err) {
> > +		printf("fuse_sense: sense error (0x%02x)\n", err);
> > +		return 1;
> > +	}
> > +
> > +	printf("bank %u row 0x%02x: 0x%02x\n", bank, row,
> > +			readb(IMX_IIM_BASE + IIM_SDAT));
> > +
> > +	return 0;
> > +}
> > +
> > +static const __maybe_unused char cmd_fuse_sense_help[] =
> > +"Usage: fuse_sense <bank> <row>\n"
> > +"Sense the fuses row at <bank> <row>\n";
> > +
> > +BAREBOX_CMD_START(fuse_sense)
> > +	.cmd	= do_fuse_sense,
> > +	.usage	= "sense fuse row",
> > +	BAREBOX_CMD_HELP(cmd_fuse_sense_help)
> > +BAREBOX_CMD_END
> > -- 
> > 1.7.1

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-08-12  8:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-10  6:25 Baruch Siach
2010-08-10  6:25 ` [PATCH 2/2] fec: add support for IIM stored mac address Baruch Siach
2010-08-10  7:09 ` [PATCH 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox Jean-Christophe PLAGNIOL-VILLARD
2010-08-12  8:34   ` Baruch Siach [this message]
2010-08-12  8:35   ` [PATCH v2 " Baruch Siach
2010-08-12  8:35     ` [PATCH v2 2/2] fec: add support for IIM stored mac address Baruch Siach
2010-08-12  9:06     ` [PATCH v2 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox Sascha Hauer
2010-08-12  9:27       ` Baruch Siach
2010-08-12 12:04         ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100812083409.GD13166@jasper.tkos.co.il \
    --to=baruch@tkos.co.il \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox