From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1P3tp3-0002bT-LO for barebox@lists.infradead.org; Thu, 07 Oct 2010 17:00:02 +0000 Date: Thu, 7 Oct 2010 18:59:59 +0200 From: Sascha Hauer Message-ID: <20101007165959.GJ28242@pengutronix.de> References: <1286457858-29771-1-git-send-email-jbe@pengutronix.de> <1286457858-29771-6-git-send-email-jbe@pengutronix.de> <20101007153713.GH28242@pengutronix.de> <201010071800.06450.jbe@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <201010071800.06450.jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 5/7] Add MCI card support to barebox To: Juergen Beisert Cc: barebox@lists.infradead.org On Thu, Oct 07, 2010 at 06:00:06PM +0200, Juergen Beisert wrote: > Sascha Hauer wrote: > > On Thu, Oct 07, 2010 at 03:24:16PM +0200, Juergen Beisert wrote: > > > This adds the basic framework to handle MCI cards in barebox. > > > > > > Signed-off-by: Juergen Beisert > > > --- > > > drivers/Kconfig | 1 + > > > drivers/Makefile | 1 + > > > drivers/mci/Kconfig | 30 ++ > > > drivers/mci/Makefile | 1 + > > > drivers/mci/mci-core.c | 1308 > > > ++++++++++++++++++++++++++++++++++++++++++++++++ include/mci.h | > > > 230 +++++++++ > > > 6 files changed, 1571 insertions(+), 0 deletions(-) > > > create mode 100644 drivers/mci/Kconfig > > > create mode 100644 drivers/mci/Makefile > > > create mode 100644 drivers/mci/mci-core.c > > > create mode 100644 include/mci.h > > > > This whole patch looks quite good. > > Please add some linebreaks in mci-core.c. I don't want strict 80 > > character lines, but some lines are really long. > > > > [snip] > > > > > +static int mci_probe(struct device_d *mci_dev) > > > +{ > > > + struct mci *mci; > > > + int rc; > > > + > > > + mci = xzalloc(sizeof(struct mci)); > > > + mci_dev->priv = mci; > > > + > > > +#ifdef CONFIG_MCI_STARTUP > > > + /* if enabled, probe the attached card immediately */ > > > + rc = mci_card_probe(mci_dev); > > > + if (rc == -ENODEV) { > > > + /* > > > + * If it fails, add the 'probe' parameter to give the user > > > + * a chance to insert a card and try again. Note: This may fail > > > + * systems that rely on the MCI card for startup (for the > > > + * persistant environment for example) > > > + */ > > > + rc = add_mci_parameter(mci_dev); > > > + if (rc != 0) { > > > + pr_err("Failed to add 'probe' parameter to the MCI device\n"); > > > + goto on_error; > > > + } > > > + } > > > +#endif > > > + > > > +#ifndef CONFIG_MCI_STARTUP > > > > #else instead? > > > > > + /* add params on demand */ > > > + rc = add_mci_parameter(mci_dev); > > > + if (rc != 0) { > > > + pr_err("Failed to add 'probe' parameter to the MCI device\n"); > > > + goto on_error; > > > + } > > > +#endif > > > + > > > + return rc; > > > + > > > +on_error: > > > + free(mci); > > > + return rc; > > > +} > > > + > > > > [snip] > > > > > + > > > +/** host information */ > > > +struct mci_platformdata { > > > + struct device_d *hw_dev; /**< the host MCI hardware device */ > > > + unsigned voltages; > > > + unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* > > > and FIXME */ + unsigned f_min; /**< host interface lower limit */ > > > + unsigned f_max; /**< host interface upper limit */ > > > + unsigned clock; /**< Current clock used to talk to the card */ > > > + unsigned bus_width; /**< used data bus width to the card */ > > > + > > > + int (*init)(struct device_d*, struct device_d*); /**< init the host > > > interface */ + void (*set_ios)(struct device_d*, struct device_d*, > > > unsigned, unsigned); /**< change host interface settings */ + int > > > (*send_cmd)(struct device_d*, struct mci_cmd*, struct mci_data*); /**< > > > handle a command */ +}; > > > > I prefer this struct named mci_host, this seems to match better what it > > actually is. > > Hmm, no, its not a "host". It is the MMC/SD card instance. The host is more > the interface, isn't it (at least for me)? It's a host at least in the Linux terminology. > > > For the convenience of drivers set init/set_ios/send_cmd > > functions should be passed a pointer to the mci_host, not the device, > > because that's what they actually registered. I already prepared a patch > > for this, I'll send it in a seperate mail. > > I tried to layering the devices: > > disk_device -> knows how to handle disk drives and partition tables > | > mci_device -> knows how to probe and manage MMC/SD cards > | > hw_device -> knows how to transfer data > > Most functions in the hw_device layer do not need access to any other > structure data than their own device (okay, there is a exception). So, I > tried to keep it simple. I didn't change the underlying structure, only the pointer which is passed to the functions. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox