mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Belisko Marek <marek.belisko@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 4/7] LED: Add LED trigger support
Date: Sat, 18 Dec 2010 18:21:31 +0100	[thread overview]
Message-ID: <20101218172131.GL6017@pengutronix.de> (raw)
In-Reply-To: <AANLkTi=D2uErKO0_HL0poEtcwymgU_E1VfeqUPqe+DW1@mail.gmail.com>

Hi Marek,

On Sat, Dec 18, 2010 at 05:51:56PM +0100, Belisko Marek wrote:
> Hi,
> 
> On Sat, Dec 18, 2010 at 4:15 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > This patch allows to associate LEDs with certain triggers, such
> > as heartbeat or network activity.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/led/Kconfig  |    3 +++
> >  drivers/led/Makefile |    1 +
> >  include/led.h        |   26 ++++++++++++++++++++++++++
> >  include/net.h        |    3 +++
> >  lib/vsprintf.c       |    4 ++++
> >  net/eth.c            |   20 +++++++++++++++++++-
> >  net/net.c            |   21 ++++++++++++++++-----
> >  7 files changed, 72 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
> > index b5e2f97..d8540c5 100644
> > --- a/drivers/led/Kconfig
> > +++ b/drivers/led/Kconfig
> > @@ -7,4 +7,7 @@ config LED_GPIO
> >        bool "gpio LED support"
> >        depends on GENERIC_GPIO
> >
> > +config LED_TRIGGERS
> > +       bool "LED triggers support"
> > +
> >  endif
> > diff --git a/drivers/led/Makefile b/drivers/led/Makefile
> > index 29b9fd5..6aafa6d 100644
> > --- a/drivers/led/Makefile
> > +++ b/drivers/led/Makefile
> > @@ -1,2 +1,3 @@
> >  obj-$(CONFIG_LED) += core.o
> >  obj-$(CONFIG_LED_GPIO) += led-gpio.o
> > +obj-$(CONFIG_LED_TRIGGERS) += led-triggers.o
> > diff --git a/include/led.h b/include/led.h
> > index 98b8c2e..2dc0f9d 100644
> > --- a/include/led.h
> > +++ b/include/led.h
> > @@ -22,6 +22,32 @@ int led_register(struct led *led);
> >  void led_unregister(struct led *led);
> >  void led_unregister(struct led *led);
> >
> > +/* LED trigger support */
> > +enum led_trigger {
> > +       led_trigger_panic,
> > +       led_trigger_heartbeat,
> > +       led_trigger_net_rx,
> > +       led_trigger_net_tx,
> > +       led_trigger_net_txrx,
> > +       led_trigger_max,
> > +};
> shouldn't be enums uppercase?

You're right. Will change this.

Sascha

> > +
> > +#ifdef CONFIG_LED_TRIGGERS
> > +int led_set_trigger(enum led_trigger trigger, struct led *led);
> > +void led_trigger(enum led_trigger trigger, bool enable);
> > +#else
> > +static inline int led_set_trigger(enum led_trigger trigger, struct led *led)
> > +{
> > +       return 0;
> > +}
> > +
> > +static inline void led_trigger(enum led_trigger trigger, bool enable)
> > +{
> > +}
> > +#endif
> > +
> > +int led_get_trigger(enum led_trigger trigger);
> > +
> >  /* gpio LED support */
> >  struct gpio_led {
> >        int gpio;
> > diff --git a/include/net.h b/include/net.h
> > index c695e5f..71c314e 100644
> > --- a/include/net.h
> > +++ b/include/net.h
> > @@ -18,6 +18,7 @@
> >  #include <malloc.h>
> >  #include <stdlib.h>
> >  #include <clock.h>
> > +#include <led.h>
> >  #include <asm/byteorder.h>     /* for nton* / ntoh* stuff */
> >
> >
> > @@ -417,4 +418,6 @@ static inline unsigned char *net_udp_get_payload(struct net_connection *con)
> >  int net_udp_send(struct net_connection *con, int len);
> >  int net_icmp_send(struct net_connection *con, int len);
> >
> > +void led_trigger_network(enum led_trigger trigger, int active);
> > +
> >  #endif /* __NET_H__ */
> > diff --git a/lib/vsprintf.c b/lib/vsprintf.c
> > index e2ea84d..6117337 100644
> > --- a/lib/vsprintf.c
> > +++ b/lib/vsprintf.c
> > @@ -17,6 +17,7 @@
> >  #include <malloc.h>
> >
> >  #include <common.h>
> > +#include <led.h>
> >  #include <reloc.h>
> >
> >  unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base)
> > @@ -625,6 +626,9 @@ void __noreturn panic(const char *fmt, ...)
> >        vprintf(fmt, args);
> >        putchar('\n');
> >        va_end(args);
> > +
> > +       led_trigger(led_trigger_panic, 1);
> > +
> >  #if defined (CONFIG_PANIC_HANG)
> >        hang();
> >  #else
> > diff --git a/net/eth.c b/net/eth.c
> > index a82a263..6ac4f09 100644
> > --- a/net/eth.c
> > +++ b/net/eth.c
> > @@ -77,7 +77,13 @@ int eth_send(void *packet, int length)
> >                eth_current->active = 1;
> >        }
> >
> > -       return eth_current->send(eth_current, packet, length);
> > +       led_trigger_network(led_trigger_net_tx, 1);
> > +
> > +       ret = eth_current->send(eth_current, packet, length);
> > +
> > +       led_trigger_network(led_trigger_net_tx, 0);
> > +
> > +       return ret;
> >  }
> >
> >  int eth_rx(void)
> > @@ -183,4 +189,16 @@ void eth_unregister(struct eth_device *edev)
> >        list_del(&edev->list);
> >  }
> >
> > +void led_trigger_network(enum led_trigger trigger, int enable)
> > +{
> > +       static bool rx_active, tx_active;
> >
> > +       led_trigger(trigger, enable);
> > +
> > +       if (trigger == led_trigger_net_tx)
> > +               tx_active = enable;
> > +       if (trigger == led_trigger_net_rx)
> > +               rx_active = enable;
> > +
> > +       led_trigger(led_trigger_net_txrx, tx_active || rx_active);
> > +}
> > diff --git a/net/net.c b/net/net.c
> > index a613d1d..afd5964 100644
> > --- a/net/net.c
> > +++ b/net/net.c
> > @@ -628,19 +628,30 @@ int net_receive(unsigned char *pkt, int len)
> >  {
> >        struct ethernet *et = (struct ethernet *)pkt;
> >        int et_protlen = ntohs(et->et_protlen);
> > +       int ret;
> >
> > -       if (len < ETHER_HDR_SIZE)
> > -               return 0;
> > +       led_trigger_network(led_trigger_net_rx, 1);
> > +
> > +       if (len < ETHER_HDR_SIZE) {
> > +               ret = 0;
> > +               goto out;
> > +       }
> >
> >        switch (et_protlen) {
> >        case PROT_ARP:
> > -               return net_handle_arp(pkt, len);
> > +               ret = net_handle_arp(pkt, len);
> > +               break;
> >        case PROT_IP:
> > -               return net_handle_ip(pkt, len);
> > +               ret = net_handle_ip(pkt, len);
> > +               break;
> >        default:
> >                debug("%s: got unknown protocol type: %d\n", __func__, et_protlen);
> > -               return 1;
> > +               ret = 1;
> > +               break;
> >        }
> > +out:
> > +       led_trigger_network(led_trigger_net_rx, 0);
> > +       return ret;
> >  }
> >
> >  static int net_init(void)
> > --
> > 1.7.2.3
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
> 
> thanks,
> 
> marek
> 
> -- 
> as simple and primitive as possible
> -------------------------------------------------
> Marek Belisko - OPEN-NANDRA
> Freelance Developer
> 
> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> Tel: +421 915 052 184
> skype: marekwhite
> icq: 290551086
> web: http://open-nandra.com
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-12-18 17:21 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-18 15:15 LED framework Sascha Hauer
2010-12-18 15:15 ` [PATCH 1/7] Add generic poll infrastructure Sascha Hauer
2010-12-18 15:28   ` Sascha Hauer
2010-12-18 15:15 ` [PATCH 2/7] basic LED support Sascha Hauer
2010-12-18 16:38   ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-18 17:18     ` Sascha Hauer
2010-12-18 16:48   ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-18 19:06   ` Belisko Marek
2010-12-19 21:31   ` Marc Reilly
2010-12-20  8:27     ` Sascha Hauer
2010-12-18 15:15 ` [PATCH 3/7] LED: Add gpio " Sascha Hauer
2010-12-18 16:41   ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-18 17:18     ` Sascha Hauer
2010-12-18 15:15 ` [PATCH 4/7] LED: Add LED trigger support Sascha Hauer
2010-12-18 16:51   ` Belisko Marek
2010-12-18 17:21     ` Sascha Hauer [this message]
2010-12-18 15:15 ` [PATCH 5/7] LED: Add led command Sascha Hauer
2010-12-18 16:45   ` Jean-Christophe PLAGNIOL-VILLARD
2010-12-18 17:24     ` Sascha Hauer
2010-12-18 15:15 ` [PATCH 6/7] LED: Add trigger command Sascha Hauer
2010-12-18 15:15 ` [PATCH 7/7] pcm038: led testing. Not to be committed Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101218172131.GL6017@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=marek.belisko@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox