From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PfvxI-0006Hy-0A for barebox@lists.infradead.org; Thu, 20 Jan 2011 14:57:45 +0000 Date: Thu, 20 Jan 2011 15:57:41 +0100 From: Sascha Hauer Message-ID: <20110120145741.GY9041@pengutronix.de> References: <1295516821-8988-1-git-send-email-s.hauer@pengutronix.de> <1295516821-8988-6-git-send-email-s.hauer@pengutronix.de> <4D38404B.1020204@free-electrons.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <4D38404B.1020204@free-electrons.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 05/10] i.MX23/28: Fix setting of lcd clock To: Gregory CLEMENT Cc: barebox@lists.infradead.org On Thu, Jan 20, 2011 at 03:01:47PM +0100, Gregory CLEMENT wrote: > On 01/20/2011 10:46 AM, Sascha Hauer wrote: > > Use the correct bitmask for masking out which is > > SET_PIXFRAC(MASK_PIXFRAC) > > > > I was just about to send you the same kind of patch, as this bug bit me during > kernel boot when using cpufreq. > > As you are working on imx23 and video driver, what do you think of my previous > patches ? I sent them in January the 4th: > > ARM STM/i.MX: Add possibility to choose the bit per pixel for STM > video driver This looks ok. > ARM STM/i.MX: Add possibility to select the data mode for stm video > driver ( DCn signal is high ) Looks ok. What is this pin good for? Is this bit used in conjunction with other bits which happen to have the right value for you? > ARM STM/i.MX: Add the reset control of LCD We use the same pin as gpio and toggle it in the platform specific hook, so I could rebase my chumby patch on this one. For the last two patches I prefer having flags in the platform data rather than having a u32 for a single flag. Sascha > > They should need to be rebased on this new patch set as you made some changes > with the name of the structures and the name of the files. But before doing > this I would like to know if there was a chance that they will be applied in > barebox. > > > > Signed-off-by: Sascha Hauer > > --- > > arch/arm/mach-stm/imx_lcd_clk.c | 3 ++- > > 1 files changed, 2 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-stm/imx_lcd_clk.c b/arch/arm/mach-stm/imx_lcd_clk.c > > index 8938664..65bfc6e 100644 > > --- a/arch/arm/mach-stm/imx_lcd_clk.c > > +++ b/arch/arm/mach-stm/imx_lcd_clk.c > > @@ -120,7 +120,8 @@ unsigned imx_set_lcdifclk(unsigned nc) > > best_frac, best_div, 480 * 18 / best_frac, > > 480000 * 18 / best_frac / best_div); > > > > - reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC) & ~MASK_PIXFRAC; > > + reg = readl(IMX_CCM_BASE + HW_CLKCTRL_FRAC); > > + reg &= ~SET_PIXFRAC(MASK_PIXFRAC); > > reg |= SET_PIXFRAC(best_frac); > > writel(reg, IMX_CCM_BASE + HW_CLKCTRL_FRAC); > > writel(reg & ~CLKCTRL_FRAC_CLKGATEPIX, IMX_CCM_BASE + HW_CLKCTRL_FRAC); > > > -- > Gregory Clement, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com > +33 602 196 044 > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox