From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1PwIX9-0001kI-N8 for barebox@lists.infradead.org; Sun, 06 Mar 2011 18:18:24 +0000 From: Juergen Beisert Date: Sun, 6 Mar 2011 19:15:57 +0100 References: <20110305142224.2bba1da1@manocska.bendor.com.au> <201103051251.44209.jbe@pengutronix.de> <20110306164311.172060@gmx.net> In-Reply-To: <20110306164311.172060@gmx.net> MIME-Version: 1.0 Content-Disposition: inline Message-Id: <201103061915.57929.jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: When do patches get into the releases? To: barebox@lists.infradead.org Hi Dirk, Dirk Gerdes wrote: > I'm trying to install barebox on my mini2440. > I followed the instructions in the bottom of "mini2440.c". > Barebox starts from Ram, but if I switch to NAND and start the board again, > console keeps quiet. At the moment I have no idea, what went wrong. > > I used the latest version from git and I got the > 1GB-X35 Mini2440-Board. My bad. The current S3C2440 NAND driver only supports small page NANDs. But even with support for the 'advanced' NANDs (2kiB page size) currently it still does not boot from NAND... Will send my patch series, as soon the board boots from NAND. Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox