From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from tango.tkos.co.il ([62.219.50.35]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1Q9rOS-0007Kc-ML for barebox@lists.infradead.org; Wed, 13 Apr 2011 04:09:29 +0000 Date: Wed, 13 Apr 2011 07:09:12 +0300 From: Baruch Siach Message-ID: <20110413040912.GA14112@jasper.tkos.co.il> References: <20110412042538.GA20619@jasper.tkos.co.il> <20110413030149.GE4709@game.jcrosoft.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: First time on this list To: Marko Milutinovic Cc: barebox@lists.infradead.org Hi Marko, On Tue, Apr 12, 2011 at 09:42:47PM -0600, Marko Milutinovic wrote: > One last question though, does this section have to be populated manually? > Do i have to explicitly load a env.bin file to my device and then copy it to > the env0 partition? Is there a way to have this loaded onto my main > bootloader .bin file when it gets compiled? If you set CONFIG_DEFAULT_ENVIRONMENT and CONFIG_DEFAULT_ENVIRONMENT_PATH in your .config, then you have a default environment compiled into your Barebox image. Then, to save this default environment into your flash just run 'saveenv'. baruch > On Tue, Apr 12, 2011 at 9:01 PM, Jean-Christophe PLAGNIOL-VILLARD < > plagnioj@jcrosoft.com> wrote: > > > Hi, > > > > could you send your board patch and the log of your console > > so we can help you more > > > > btw please do not post in HTML > > > > Best Regards, > > J. > > On 12:42 Tue 12 Apr , Marko Milutinovic wrote: > > > Hello, > > > 1. I don't think that I took any steps to save the environment. Not > > sure > > > how to go about doing that. I have the 'env\bin\init' file under my > > board > > > directory. I was under the impressions this would get built in > > > automatically. Additionally in my init.c file for my board I have the > > > following lines: > > > devfs_add_partition("nor0", 0x01000000, 0x10000, PARTITION_FIXED, > > > "self_raw"); > > > devfs_add_partition("nor0", 0x01010000, 0x1000, PARTITION_FIXED, > > "env0"); > > > 2. When my board boots i get the following output lines > > > Malloc space: .(rest of text ...) > > > Stack space: (rest of text ...) > > > Open /dev/env0 error2 > > > running /env/bin/init... > > > not found > > > barebox: > > > Thanks > > > Marko > > > > > > On Mon, Apr 11, 2011 at 10:25 PM, Baruch Siach > > wrote: > > > > > > Hi Marko, > > > On Mon, Apr 11, 2011 at 09:18:53PM -0600, Marko Milutinovic wrote: > > > > I have barebox working almost fully on my board, except I can't > > get > > > the > > > > environment to load ... I have an env0 partition allocated and > > under > > > my > > > > board I have the /env/bin/init file. Anyone have any tips as to > > what I > > > am > > > > missing or can they point me to another resource? > > > > > > More info is needed: > > > > > > 1. What did you do to save the environment? > > > > > > 2. What is your indication that the environment doesn't "load"? > > > > > > baruch > > > -- -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox