From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1QKP07-0007gF-LT for barebox@lists.infradead.org; Thu, 12 May 2011 06:03:56 +0000 Date: Thu, 12 May 2011 08:03:49 +0200 From: Sascha Hauer Message-ID: <20110512060349.GO30963@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: AM3517EVM port To: Yegor Yefremov Cc: barebox@lists.infradead.org Hi Yegor, On Thu, May 12, 2011 at 12:06:15AM +0200, Yegor Yefremov wrote: > Hello, > > has anyone ported AM3517EVM board or other omap3517 based board to > barebox? I couldn't find any patches. No, I am not aware of any patches for this. How different is the omap3517 from the one on the beagle board? > > The second question is about OMAP boot procedure. Can I just rename > barebox to u-boot.bin and let it be loaded by x-loader? More specifically barebox.bin to u-boot.bin, yes. This at least works on the beagle and panda boards. barebox can also act as an x-loader aswell (in which case it loads barebox.bin as second stage). See the *xload* defconfigs. Regards Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox