From: Sascha Hauer <s.hauer@pengutronix.de>
To: Belisko Marek <marek.belisko@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: booting pandaboard rev A2 problems
Date: Mon, 20 Jun 2011 09:04:58 +0200 [thread overview]
Message-ID: <20110620070458.GN23771@pengutronix.de> (raw)
In-Reply-To: <BANLkTi=DFpLyEQwe62KSjYUn+pGPxPe1CQ@mail.gmail.com>
Hi Marek,
On Fri, Jun 17, 2011 at 09:26:46PM +0200, Belisko Marek wrote:
> Hi,
>
> I'm trying to boot barebox on Panda rev. A2.
Hm, I don't know the revision of our panda board. I'll have a look
later, it may be different.
>
> I make panda_xload_defconfig compile and put to FAT SD card partition
> ranamed barebox.bin to u-boot.bin (MLO reads u-boot.bin by default).
I'm a bit confused. The binary resulting from xload_defconfig is
supposed to replace MLO. There are two panda defconfig in the tree, one
for xloader replacement and one regular full blown config.
>
> Barebox start but after printing revision number is stuck. I add some
> printks and
> seems it hang in omap_hsmmc_probe funtion after mci_register(&hsmmc->mci) call.
>
> I try with 2 SD cards and non of them is working.
>
> Also try to load to flash partition only barebox.bin.itf + barebox.bin
> but this setup also
> doesn't work. AFAIU itf add some data before barebox to be possible to
> boot directly without
> x-loader. When run_shell is called barebox.bin should be copied do
> DDRAM and run.
Ok, let's try to sort things a bit.
does panda_xload_defconfig barebox.bin.itf copied as MLO to the SD card
produce any output?
Does panda_defconfig copied as u-boot.bin to the SD card work or does it
behave like you described above?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-06-20 7:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-17 19:26 Belisko Marek
2011-06-20 6:33 ` Antwort: " Jan Weitzel
2011-06-20 7:04 ` Sascha Hauer [this message]
2011-06-20 17:59 ` Belisko Marek
2011-06-20 11:38 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110620070458.GN23771@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=marek.belisko@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox