mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* scripts for testing barebox in qemu
@ 2011-08-11 21:23 Antony Pavlov
  2011-08-12  7:36 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Antony Pavlov @ 2011-08-11 21:23 UTC (permalink / raw)
  To: barebox

Hi!

Some times ago I made the scripts for building mips cross-development
stuff: toolchain, patched qemu, firmware, linux and small rootfs.
I named the scripts 'clab'.

Today this scripts work not only for mips, but for arm, pc and
sparc32 too.

(Yes, yes, I know about the existing projects of such type.
I'm planning to migrate to buildroot in the future.)

Also clab has a script for running qemu in convenient way.

In this letter I want propose this scripts for very easy testing
of barebox on MIPS Malta (with initial PCI support) and
on ARM Versatile.

A small instruction:

1. clab will install toolchain and qemu to /opt/clab, so prepare it

sudo mkdir /opt/clab
sudo chown $USER /opt/clab

2. get and unpack clab

wget http://prizma.bmstu.ru/~antony/barebox/clab-0.34.tar.gz
tar vfx clab-0.34.tar.gz
cd clab-0.34

3. build toolchain, qemu, firmware, linux & rootfs

./mk_src_dir.sh
./build-all.sh

If you don't want build linux & rootfs you can disable
options --build_linux and --build-rootfs.

Clab will put all compiled stuff in the directory 'out'.

4. start barebox

./start-qemu.sh qemu-configs/versatile-linux-gnueabi/barebox-no-network-stdio

./start-qemu.sh qemu-configs/malta-linux-gnu/barebox-no-network-stdio

Also you can run linux:

./start-qemu.sh qemu-configs/versatile-linux-gnueabi/stdio-no-network

./start-qemu.sh qemu-configs/malta-linux-gnu/stdio-no-network

5. starting barebox with network support need root
permissions to setup tap network interface.

So to try barebox with Realtek 8139 on PCI bus run this:

sudo ./start-qemu.sh qemu-configs/versatile-linux-gnueabi/barebox-stdio

-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: scripts for testing barebox in qemu
  2011-08-11 21:23 scripts for testing barebox in qemu Antony Pavlov
@ 2011-08-12  7:36 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2011-08-12  7:36 UTC (permalink / raw)
  To: Antony Pavlov; +Cc: barebox

On Fri, Aug 12, 2011 at 01:23:36AM +0400, Antony Pavlov wrote:
> Hi!
> 
> Some times ago I made the scripts for building mips cross-development
> stuff: toolchain, patched qemu, firmware, linux and small rootfs.
> I named the scripts 'clab'.
> 
> Today this scripts work not only for mips, but for arm, pc and
> sparc32 too.
> 
> (Yes, yes, I know about the existing projects of such type.
> I'm planning to migrate to buildroot in the future.)
> 
> Also clab has a script for running qemu in convenient way.
> 
> In this letter I want propose this scripts for very easy testing
> of barebox on MIPS Malta (with initial PCI support) and
> on ARM Versatile.

Maybe you can add this information to the wiki. You need an account
for this which I can create for you (and everyone else who is
interested).

Sascha



> 
> A small instruction:
> 
> 1. clab will install toolchain and qemu to /opt/clab, so prepare it
> 
> sudo mkdir /opt/clab
> sudo chown $USER /opt/clab
> 
> 2. get and unpack clab
> 
> wget http://prizma.bmstu.ru/~antony/barebox/clab-0.34.tar.gz
> tar vfx clab-0.34.tar.gz
> cd clab-0.34
> 
> 3. build toolchain, qemu, firmware, linux & rootfs
> 
> ./mk_src_dir.sh
> ./build-all.sh
> 
> If you don't want build linux & rootfs you can disable
> options --build_linux and --build-rootfs.
> 
> Clab will put all compiled stuff in the directory 'out'.
> 
> 4. start barebox
> 
> ./start-qemu.sh qemu-configs/versatile-linux-gnueabi/barebox-no-network-stdio
> 
> ./start-qemu.sh qemu-configs/malta-linux-gnu/barebox-no-network-stdio
> 
> Also you can run linux:
> 
> ./start-qemu.sh qemu-configs/versatile-linux-gnueabi/stdio-no-network
> 
> ./start-qemu.sh qemu-configs/malta-linux-gnu/stdio-no-network
> 
> 5. starting barebox with network support need root
> permissions to setup tap network interface.
> 
> So to try barebox with Realtek 8139 on PCI bus run this:
> 
> sudo ./start-qemu.sh qemu-configs/versatile-linux-gnueabi/barebox-stdio
> 
> -- 
> Best regards,
>   Antony Pavlov
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2011-08-12  7:36 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-11 21:23 scripts for testing barebox in qemu Antony Pavlov
2011-08-12  7:36 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox