* v2011.09.0 - holiday release
@ 2011-08-26 14:40 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2011-08-26 14:40 UTC (permalink / raw)
To: barebox
I just released v2011.09.0. It's a little early, but I won't be available
for the next two weeks and only partly available the week after.
Provided I am not eaten by sharks I'll be back online in the middle of
september.
Have fun
Sascha
Antony Pavlov (5):
debug_ll.h: add PUTS_LL() function
startup.c: make DEBUG_LL output more useful
DRIVER_SERIAL_LINUX_CONSOLE: fix misprint
Add option DEBUG_LL to common/Kconfig
remove unused U-Boot header file include/ioports.h
Fabio Estevam (1):
ARM: mx53loco: Fix DD3 initialization
Franck Jullien (4):
nios2/generic.c: Add resources for altera TSE
nios2/altera_tse: Switch to resources
nios2/serial_altera: Switch to resources
nios2/altera_serial_jtag: Switch to resources
Jean-Christophe PLAGNIOL-VILLARD (68):
device: introduce resource structure to simplify resource declaration
at91: switch to all resource declaration to "struct resource"
at91/serial: switch to "struct resource"
macb: switch to "struct resource"
atmel_mci: switch to "struct resource"
atmel_nand: switch to "struct resource"
dm9200: use "struct resource" instead of platform_data
nomadik: switch to all resource declaration to "struct resource"
nomadik_nand: use "struct resource" instead of platform_data
amba-pl011: switch to "struct resource"
mem: replace DEVFS_RDWR by IORESOURCE_MEM_WRITEABLE
at91: add missing IORESOURCE_MEM flags to resources
atmel/drivers: switch to dev_request_mem_region
dm9000: switch to dev_request_mem_region
nomadik: add missing IORESOURCE_MEM flags to resources
nomadik/nand: switch to dev_request_mem_region
amba-pl011: fix missing switch to "struct resource"
amba-pl011: switch to dev_request_mem_region
armlinux: mem tag switch to "struct resource"
drivers/bus: move to drivers/base
drivers: move resource generic management to driver/base/resource.c
resource: introduce add_generic_device to register simple device
at91: switch to add_generic_device
imx/devices: switch to add_generic_device
resource: introduce add_cfi_device to register simple cfi device
versatile: switch to add_generic_device
nomadik: switch to add_generic_device
mci: switch to "struct resource"
ata/bios: convert to struct resource
i2c: convert to struct resource
nand: convert to struct resource
eukrea_cpuimx35: fix warning: 'usbotg_dev' defined but not used
generic_memmap_ro/rw: switch to resource
devinfo: switch to resource
dm9000: replace DM9000_WIDTH_8/16/32 by IORESOURCE_MEM_8/16/32BIT
dm9000: introduce add_dm9000_device to register dm9000 device
resource: introduce add_usb_ehci_device to register echi device
omap: switch to add_generic_device
fb: switch to "struct resource"
cfi_flash: convert missing map_base
fsl_udc: switch to resource
pcm030: switch to resources
ipe337: switch to resources
s3c/boards: switch to resources
ns16550: if not specific f_caps defined use default stdin, stdout, stderr
edb93xx: switch to resource
netx: switch to resource
fs: switch to resource
ata: switch to resource
sandbox: switch to resource
imx: switch remaing board to resource
mci-core: switch to resource
nios2: remove dead code in generic board
ns16550: switch to resource
driver: remove map_base
arm: introduce arm_add_mem_device to register dram device
init: introduce mem, mmu and postmmu initcall
serial_ns16550: drop the non working check
at91: swtich to clkdev
arm_dcc: fix missing switch to resource
at91sam9261ek: fix missing ecc type
nomadik: switch to static allocation clkdev
versatilek: switch to static allocation clkdev
clkdev: factorize macro
nomadik: fix static allocation clkdev
versatile: fix static allocation clkdev
disk_drive: fix x86 support
x86/generic_pc: fix missing switch to resource
Juergen Beisert (1):
phyCORE-i.MX27: Keep frequency multiplier enabled to be able to do a warmstart
Marc Kleine-Budde (3):
mx51: rename clock-imx51.h -> clock-imx51_53.h
ARM: add support for the i.MX53
arm: add support for the i.MX53 loco board
Paul Fertser (1):
iomux-mx25: fix MDIO pin configuration
Sascha Hauer (94):
register_device: Add IORESOURCE_MEM flag
device: Add a dev_request_mem_region function
add a add_mem_device function
mem_read/write: use resources
nand i.MX: convert to struct resource
video i.MX: convert to struct resource
serial i.MX: convert to struct resource
i2c i.MX: convert to struct resource
mci i.MX: convert to struct resource
net i.MX fec: convert to struct resource
mci i.MX esdhc: convert to struct resource
spi i.MX: convert to struct resource
video i.MX ipu: convert to struct resource
i.MX devices: convert to struct resource
cfi: convert to struct resource
MCI imx-esdhc: Fix multiblock transfers on i.MX53
MCI imx-esdhc: remove unnecessary large delay
Merge branch 'resource' of git://uboot.jcrosoft.org/barebox into next
ARM dma_alloc_coherent: Fix alignment for !MMU case
net i.MX fec: make multi instance safe
net i.MX fec: remove unnecessary alignment
net i.MX fec: embed ethernet device into priv
net i.MX fec: rename driver struct to be generic
serial netx: get rid of map_base
serial s3c: get rid of map_base
serial pl010: get rid of map_base
serial stm: get rid of map_base
serial mpc5xxx: get rid of map_base
smc911x: use dev_* instead of printf
smc911x: switch to use resources
smc911x: embed eth_device into priv
ARM pcm037: Fix wrong sdram base
smc91111: switch to resources
fec_mpc5200: switch to resources
ARM i.MX cupid: use device registration helpers
ARM i.MX pca100: use device registration helpers
ARM i.MX scb9328: create uart registration helpers and use them
ARM i.MX35 3stack: use device registration helpers
ARM i.MX21ads : use device registration helpers
ARM i.MX pcm037: use device registration helpers
add a ns16550 registration helper and use it
net: remove unused fields from struct eth_device
ARM i.MX: Add missing cpu_is_mx53()
fix typo
mci: do not use unitialized resource
Merge branch 'pu' into next
ARM i.MX IIM: Add a iim read function
net: Add a possibility for boards to give network devices a MAC address
ARM i.MX: rework IIM MAC address setting
ARM i.MX51 babbage: set fec ethernet address from IIM
ARM i.MX25 tx25: Add IIM support for MAC address
ARM i.MX: IIM rework
ARM i.MX IIM: add support for more SoCs
ARM i.MX IIM: Make explicit sensing the default
ARM i.MX25 IIM: switch IIM support to use resources
ARM i.MX35: Add IIM support
ARM i.MX31: Add IIM support
ARM i.MX51: Add IIM support
ARM i.MX IIM: switch to resources
ARM i.MX27: Add IIM support
Merge branches 'pu-ethaddr', 'pu-fec', 'pu-imx-iim', 'pu-resources' and 'pu-resources1' into next
remove unused DECLARE_GLOBAL_DATA_PTR
remove unused global_data.h
Merge branch 'resource' of git://uboot.jcrosoft.org/barebox into next
ARM cache l2x0: depend on MMU
ARM: move armlinux_add_dram to location which is always compiled
ARM l2x0: make init function static inline if l2 is not available
ARM: pass size to dma_free_coherent
ARM boards: move sdram setup before mmu setup
ARM: rework MMU support
ARM boards: remove now unnecessary mmu calls
ARM mmu: Fix arm_create_pte
remove now unnecessary HAVE_MMU from Kconfig
memcpy command: allow to interrupt
Add 'time' command to measure execution time of a command
Merge branch 'pu-remove-gd_t' into next
ARM scb9328: Add missing env
ARM cupid: update defconfig
ARM babbage: update defconfig
ARM cupid: update defconfig
ARM pca100: update defconfig
ARM pcm037: update defconfig
ARM pcm038: update defconfig
ARM pcm043: update defconfig
ARM scb9328: update defconfig
Merge branch 'pu-mmu' into next
Merge branch 'pu-time' into next
Merge branch 'pu-defconfig' into next
Merge branch 'next'
drivers/base: initialize active list
net fec_mpc5200: fix lineendings
mci mxs: fix line endings
ARM i.MX51: Fix gpio1 base address
Release v2011.09.0
Teresa Gámez (2):
ARM pcm043: Check silicon revision to set up cpu freq correct
ARM pcm043: New RAM timings
Documentation/boards.dox | 1 +
Makefile | 2 +-
arch/arm/Kconfig | 1 +
arch/arm/Makefile | 1 +
arch/arm/boards/a9m2410/a9m2410.c | 83 +-
arch/arm/boards/a9m2440/a9m2440.c | 70 +-
arch/arm/boards/at91rm9200ek/init.c | 18 +-
arch/arm/boards/at91sam9260ek/init.c | 9 +-
arch/arm/boards/at91sam9261ek/init.c | 24 +-
arch/arm/boards/at91sam9263ek/init.c | 18 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 8 +-
arch/arm/boards/chumby_falconwing/falconwing.c | 79 +--
arch/arm/boards/edb93xx/edb93xx.c | 119 +--
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 56 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 107 +--
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 59 +-
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 41 +-
arch/arm/boards/eukrea_cpuimx51/lowlevel_init.S | 110 +-
arch/arm/boards/freescale-mx23-evk/mx23-evk.c | 34 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 63 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 49 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 38 +-
arch/arm/boards/freescale-mx51-pdk/lowlevel_init.S | 110 +-
arch/arm/boards/freescale-mx53-loco/Makefile | 3 +
arch/arm/boards/freescale-mx53-loco/board.c | 129 +++
.../freescale-mx53-loco/config.h} | 20 +-
arch/arm/boards/freescale-mx53-loco/env/config | 51 +
arch/arm/boards/freescale-mx53-loco/flash_header.c | 101 ++
.../arm/boards/freescale-mx53-loco/lowlevel_init.S | 172 +++
arch/arm/boards/freescale-mx53-loco/mx53-pdk.dox | 4 +
arch/arm/boards/guf-cupid/board.c | 81 +--
arch/arm/boards/guf-neso/board.c | 46 +-
arch/arm/boards/imx21ads/imx21ads.c | 42 +-
arch/arm/boards/imx27ads/imx27ads.c | 34 +-
arch/arm/boards/karo-tx25/board.c | 72 +-
arch/arm/boards/karo-tx28/tx28-stk5.c | 39 +-
arch/arm/boards/karo-tx28/tx28.c | 33 +-
arch/arm/boards/mini2440/mini2440.c | 76 +-
arch/arm/boards/mmccpu/init.c | 18 +-
arch/arm/boards/netx/netx.c | 57 +-
arch/arm/boards/nhk8815/setup.c | 39 +-
arch/arm/boards/omap/board-beagle.c | 78 +-
arch/arm/boards/omap/board-omap3evm.c | 55 +-
arch/arm/boards/omap/board-sdp343x.c | 57 +-
arch/arm/boards/panda/board.c | 72 +-
arch/arm/boards/pcm037/pcm037.c | 148 +--
arch/arm/boards/pcm038/pcm038.c | 70 +-
arch/arm/boards/pcm038/pll.h | 2 +
arch/arm/boards/pcm043/lowlevel.c | 15 +-
arch/arm/boards/pcm043/pcm043.c | 56 +-
arch/arm/boards/pcm049/board.c | 80 +--
arch/arm/boards/phycard-i.MX27/pca100.c | 61 +-
arch/arm/boards/pm9261/init.c | 30 +-
arch/arm/boards/pm9263/init.c | 18 +-
arch/arm/boards/pm9g45/init.c | 9 +-
arch/arm/boards/scb9328/env/config | 56 +
arch/arm/boards/scb9328/scb9328.c | 58 +-
arch/arm/boards/versatile/versatilepb.c | 27 +-
arch/arm/configs/cupid_defconfig | 6 +-
arch/arm/configs/freescale_mx51_babbage_defconfig | 9 +-
arch/arm/configs/freescale_mx53_loco_defconfig | 51 +
arch/arm/configs/neso_defconfig | 9 +-
arch/arm/configs/pca100_defconfig | 6 +-
arch/arm/configs/pcm037_defconfig | 5 +
arch/arm/configs/pcm038_defconfig | 7 +-
arch/arm/configs/pcm043_defconfig | 1 +
arch/arm/configs/scb9328_defconfig | 4 +-
arch/arm/cpu/Kconfig | 2 +-
arch/arm/cpu/cpu.c | 14 +
arch/arm/cpu/mmu.c | 196 +++-
arch/arm/include/asm/armlinux.h | 10 +-
arch/arm/include/asm/memory.h | 24 +-
arch/arm/include/asm/mmu.h | 30 +-
arch/arm/lib/armlinux.c | 24 +-
arch/arm/lib/bootm.c | 1 -
arch/arm/mach-at91/at91rm9200.c | 11 +
arch/arm/mach-at91/at91rm9200_devices.c | 96 +--
arch/arm/mach-at91/at91sam9260.c | 13 +
arch/arm/mach-at91/at91sam9260_devices.c | 135 +--
arch/arm/mach-at91/at91sam9261.c | 10 +
arch/arm/mach-at91/at91sam9261_devices.c | 90 +--
arch/arm/mach-at91/at91sam9263.c | 17 +
arch/arm/mach-at91/at91sam9263_devices.c | 116 +--
arch/arm/mach-at91/at91sam9g45.c | 36 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 132 +--
arch/arm/mach-at91/clock.c | 70 +-
arch/arm/mach-at91/clock.h | 7 +-
arch/arm/mach-at91/generic.h | 2 -
arch/arm/mach-at91/include/mach/clkdev.h | 7 +
arch/arm/mach-imx/Kconfig | 60 +-
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/devices.c | 16 +-
arch/arm/mach-imx/iim.c | 131 ++-
arch/arm/mach-imx/imx25.c | 39 +-
arch/arm/mach-imx/imx27.c | 10 +
arch/arm/mach-imx/imx31.c | 11 +
arch/arm/mach-imx/imx35.c | 10 +
arch/arm/mach-imx/imx51.c | 12 +-
.../asm/global_data.h => arm/mach-imx/imx53.c} | 37 +-
arch/arm/mach-imx/include/mach/clock-imx51.h | 696 -----------
arch/arm/mach-imx/include/mach/clock-imx51_53.h | 623 ++++++++++
arch/arm/mach-imx/include/mach/devices-imx1.h | 11 +
arch/arm/mach-imx/include/mach/devices-imx53.h | 58 +
arch/arm/mach-imx/include/mach/generic.h | 6 +
arch/arm/mach-imx/include/mach/iim.h | 38 +-
arch/arm/mach-imx/include/mach/imx-flash-header.h | 52 +
arch/arm/mach-imx/include/mach/imx-regs.h | 4 +-
arch/arm/mach-imx/include/mach/imx27-regs.h | 1 +
arch/arm/mach-imx/include/mach/imx53-regs.h | 139 +++
arch/arm/mach-imx/include/mach/iomux-mx25.h | 2 +-
arch/arm/mach-imx/include/mach/iomux-mx53.h | 1203 ++++++++++++++++++++
arch/arm/mach-imx/speed-imx51.c | 60 +-
arch/arm/mach-imx/speed-imx53.c | 204 ++++
arch/arm/mach-mxs/Kconfig | 2 -
arch/arm/mach-netx/netx-cm.c | 1 -
arch/arm/mach-nomadik/8815.c | 49 +-
arch/arm/mach-nomadik/include/mach/nand.h | 3 -
arch/arm/mach-omap/Kconfig | 2 -
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/devices-gpmc-nand.c | 15 +-
arch/arm/mach-omap/include/mach/syslib.h | 4 -
arch/arm/mach-omap/omap-uart.c | 36 -
arch/arm/mach-versatile/core.c | 77 +-
arch/blackfin/boards/ipe337/ipe337.c | 45 +-
arch/nios2/boards/generic/generic.c | 64 +-
arch/ppc/boards/pcm030/pcm030.c | 55 +-
arch/ppc/include/asm/global_data.h | 140 ---
arch/ppc/lib/ppclinux.c | 1 -
arch/sandbox/board/hostfile.c | 14 +-
arch/sandbox/mach-sandbox/include/mach/hostfile.h | 2 +-
arch/sandbox/os/common.c | 4 +-
arch/x86/boards/x86_generic/generic_pc.c | 44 +-
commands/Kconfig | 10 +
commands/Makefile | 1 +
commands/loads.c | 2 -
commands/mem.c | 35 +-
commands/time.c | 57 +
common/Kconfig | 14 +-
common/startup.c | 22 +-
drivers/Makefile | 1 +
drivers/ata/bios.c | 2 +-
drivers/ata/disk_drive.c | 8 +-
drivers/base/Makefile | 3 +
{lib => drivers/base}/driver.c | 40 +-
lib/bus.c => drivers/base/platform.c | 0
drivers/base/resource.c | 135 +++
drivers/i2c/busses/i2c-imx.c | 34 +-
drivers/i2c/busses/i2c-omap.c | 3 +-
drivers/mci/Kconfig | 2 +-
drivers/mci/atmel_mci.c | 2 +-
drivers/mci/imx-esdhc.c | 29 +-
drivers/mci/imx.c | 2 +-
drivers/mci/mci-core.c | 11 +-
drivers/mci/mxs.c | 10 +-
drivers/mci/omap_hsmmc.c | 2 +-
drivers/mci/s3c.c | 105 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
drivers/mtd/nand/nand_imx.c | 2 +-
drivers/mtd/nand/nand_omap_gpmc.c | 10 +-
drivers/mtd/nand/nand_s3c2410.c | 4 +-
drivers/mtd/nand/nomadik_nand.c | 7 +-
drivers/net/altera_tse.c | 63 +-
drivers/net/altera_tse.h | 15 +-
drivers/net/cs8900.c | 2 +-
drivers/net/dm9000.c | 25 +-
drivers/net/fec_imx.c | 70 +-
drivers/net/fec_imx.h | 1 +
drivers/net/fec_mpc5200.c | 18 +-
drivers/net/macb.c | 4 +-
drivers/net/smc91111.c | 2 +-
drivers/net/smc911x.c | 42 +-
drivers/nor/cfi_flash.c | 38 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/Makefile | 2 +-
drivers/serial/amba-pl011.c | 32 +-
drivers/serial/arm_dcc.c | 1 -
drivers/serial/atmel.c | 29 +-
drivers/serial/serial_altera.c | 31 +-
drivers/serial/serial_altera_jtag.c | 27 +-
drivers/serial/serial_imx.c | 5 +-
drivers/serial/serial_mpc5xxx.c | 11 +-
drivers/serial/serial_netx.c | 37 +-
drivers/serial/serial_ns16550.c | 130 ++-
drivers/serial/serial_pl010.c | 11 +-
drivers/serial/serial_s3c24x0.c | 31 +-
drivers/serial/stm-serial.c | 94 +-
drivers/spi/Kconfig | 2 +-
drivers/spi/imx_spi.c | 4 +-
drivers/usb/gadget/fsl_udc.c | 4 +-
drivers/usb/host/ehci-hcd.c | 22 +-
drivers/video/fb.c | 16 +-
drivers/video/imx-ipu-fb.c | 2 +-
drivers/video/imx.c | 2 +-
drivers/video/s3c.c | 16 +-
drivers/video/stm.c | 2 +-
fs/devfs.c | 4 +-
fs/fs.c | 13 +-
include/asm-generic/barebox.lds.h | 7 +-
include/common.h | 1 +
include/debug_ll.h | 13 +
include/dm9000.h | 7 -
include/driver.h | 91 ++-
include/init.h | 11 +-
include/ioports.h | 65 --
include/linux/clkdev.h | 19 +
include/linux/ioport.h | 115 ++
include/net.h | 8 +-
include/ns16550.h | 2 +
lib/Makefile | 2 -
net/eth.c | 59 +-
210 files changed, 5546 insertions(+), 4353 deletions(-)
create mode 100644 arch/arm/boards/freescale-mx53-loco/Makefile
create mode 100644 arch/arm/boards/freescale-mx53-loco/board.c
rename arch/arm/{include/asm/global_data.h => boards/freescale-mx53-loco/config.h} (64%)
create mode 100644 arch/arm/boards/freescale-mx53-loco/env/config
create mode 100644 arch/arm/boards/freescale-mx53-loco/flash_header.c
create mode 100644 arch/arm/boards/freescale-mx53-loco/lowlevel_init.S
create mode 100644 arch/arm/boards/freescale-mx53-loco/mx53-pdk.dox
create mode 100644 arch/arm/boards/scb9328/env/config
create mode 100644 arch/arm/configs/freescale_mx53_loco_defconfig
create mode 100644 arch/arm/mach-at91/include/mach/clkdev.h
rename arch/{sandbox/include/asm/global_data.h => arm/mach-imx/imx53.c} (54%)
delete mode 100644 arch/arm/mach-imx/include/mach/clock-imx51.h
create mode 100644 arch/arm/mach-imx/include/mach/clock-imx51_53.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx1.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx53.h
create mode 100644 arch/arm/mach-imx/include/mach/imx53-regs.h
create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx53.h
create mode 100644 arch/arm/mach-imx/speed-imx53.c
delete mode 100644 arch/arm/mach-omap/omap-uart.c
delete mode 100644 arch/ppc/include/asm/global_data.h
create mode 100644 arch/sandbox/include/asm/io.h
create mode 100644 commands/time.c
create mode 100644 drivers/base/Makefile
rename {lib => drivers/base}/driver.c (89%)
rename lib/bus.c => drivers/base/platform.c (100%)
create mode 100644 drivers/base/resource.c
delete mode 100644 include/ioports.h
create mode 100644 include/linux/ioport.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-08-26 14:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-26 14:40 v2011.09.0 - holiday release Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox