mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Fabian van der Werf <fvanderwerf@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: pandaboard boot issue
Date: Sat, 8 Oct 2011 14:50:09 +0200	[thread overview]
Message-ID: <20111008125009.GK31404@pengutronix.de> (raw)
In-Reply-To: <CAJeSw6Dm6Q698WJdQXCoE5trjYhN8e9iNR_zXqFUw2C=aPouEw@mail.gmail.com>

On Sat, Oct 08, 2011 at 01:52:17PM +0200, Fabian van der Werf wrote:
> Hi,
> 
> 
> I ran into problems trying to boot the pandaboard, which I think is the same
> others reported on this list. After printing the pandaboard revision number
> execution simply stops. I traced the problem to an unaligned access in
> disk_register_partitions(). Barebox loads first sector of the disk in
> memory. The offset of the partition table is 446 (decimal) which causes the
> entire partition table to be unaligned.
> 
> Below is a simple patch. Though, I am not sure whether this is the right
> fix, because this would affect all arm platforms and I would expect that
> such a bug would be noted earlier. I fiddled a little with the alignment bit
> in the System Control Register, but without success. I have to admit that I
> don't yet fully understand the behaviour of this bit.
> 
> Does someone else have any ideas? Or is my patch acceptable?

The patch looks good to me. Unfortunately your mailer wraps the lines
so your patch won't apply. Can you fix and resend this?

Thanks
 Sascha

> 
> 
> Kind regards,
> 
> Fabian van der Werf
> 
> 
> From f98e14b971e0269251d8694be4c7b0254a30bc52 Mon Sep 17 00:00:00 2001
> From: Fabian van der Werf <fvanderwerf@gmail.com>
> Date: Sat, 8 Oct 2011 13:34:30 +0200
> Subject: [PATCH] Fixed unaligned access
> 
> ---
>  drivers/ata/disk_drive.c |   15 ++++++++++-----
>  1 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ata/disk_drive.c b/drivers/ata/disk_drive.c
> index 14b5e66..6a5dc87 100644
> --- a/drivers/ata/disk_drive.c
> +++ b/drivers/ata/disk_drive.c
> @@ -38,6 +38,7 @@
>  #include <malloc.h>
>  #include <common.h>
>  #include <block.h>
> +#include <asm/unaligned.h>
> 
>  /**
>   * Description of one partition table entry (D*S type)
> @@ -97,25 +98,29 @@ static int disk_register_partitions(struct device_d
> *dev, struct partition_entry
>      int part_order[4] = {0, 1, 2, 3};
>      int i, rc;
>      char drive_name[16], partition_name[19];
> +    u32 partition_start, partition_size;
> 
>      /* TODO order the partitions */
> 
>      for (i = 0; i < 4; i++) {
> +        partition_start =
> get_unaligned(&table[part_order[i]].partition_start);
> +        partition_size  =
> get_unaligned(&table[part_order[i]].partition_size);
> +
>          sprintf(drive_name, "%s%d", dev->name, dev->id);
>          sprintf(partition_name, "%s%d.%d", dev->name, dev->id, i);
> -        if (table[part_order[i]].partition_start != 0) {
> +        if (partition_start != 0) {
>  #if 1
>  /* ignore partitions we can't handle due to 32 bit limits */
> -            if (table[part_order[i]].partition_start > 0x7fffff)
> +            if (partition_start > 0x7fffff)
>                  continue;
> -            if (table[part_order[i]].partition_size > 0x7fffff)
> +            if (partition_size > 0x7fffff)
>                  continue;
>  #endif
>              dev_dbg(dev, "Registering partition %s to drive %s\n",
>                  partition_name, drive_name);
>              rc = devfs_add_partition(drive_name,
> -                table[part_order[i]].partition_start * SECTOR_SIZE,
> -                table[part_order[i]].partition_size * SECTOR_SIZE,
> +                partition_start * SECTOR_SIZE,
> +                partition_size * SECTOR_SIZE,
>                  DEVFS_PARTITION_FIXED, partition_name);
>              if (rc != 0)
>                  dev_err(dev, "Failed to register partition %s (%d)\n",
> partition_name, rc);
> -- 
> 1.7.0.4

> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-10-08 12:50 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-08 11:52 Fabian van der Werf
2011-10-08 12:50 ` Sascha Hauer [this message]
2011-10-09  9:29   ` [PATCH] Fixed unaligned access Fabian van der Werf
2011-10-09  9:32     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111008125009.GK31404@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=fvanderwerf@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox