Booting Pandaboard from SD card

Booting Pandaboard from SD card

[Samuel Stirtzel]

Hi,
currently I try to get a Pandaboard to boot out of Barebox, so far I
got Barebox up and running.


For testing purpose I'd like to boot from a SD card, optimal would be
if I could set up the card like the description in the Omappedia
tutorial [1].
Is there a tutorial how to set up barebox to boot from SD cards?


What I already tried:

In the configuration file from arch/arm/boards/panda/env is the
description for a network boot configuration,
I used this file to start out and wanted to boot from the barebox prompt.

Barebox is build from my toolchain and i copy the MLO file, the
barebox.bin and the bareboxenv file to the boot partition of the card.
For convenience I currently use a precompiled MLO that has been made
for u-boot thus I just renamed the barebox.bin file to u-boot.bin.

On startup the following messages were displayed:
-
Texas Instruments X-Loader 1.5.1 (Sep  6 2011 - 13:37:48)
Reading boot sector
Loading u-boot.bin from mmc


barebox 2011.10.0 (Oct 13 2011 - 09:45:17)

Board: Texas Instrument's Panda
PandaBoard Revision: 003
ehci@ehci0: USB EHCI 1.00
Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB)
Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB)
running /env/bin/init...
not found
-
For me it looks like i forgot to copy a file or something, any advice?


Although booting the uImage with bootm looks ok it won't work, the
following message was displayed:
-
Verifying Checksum ... OK
   Image Name:   Angstrom/2.6.35.7/omap4430-panda
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3688408 Bytes =  3.5 MB
   Load Address: 80008000
   Entry Point:  80008000
OK

Starting kernel ...

commandline: <NULL>
arch_number: 2791
Uncompressing Linux... done, booting the kernel.
-
The screen just stays blank after the last message.
This looks to me like it is (obviously) caused by an incorrect
environment loaded.


Help would be appreciated.

[1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2
partitions, one for boot files and the other for the rootfs)

-- 
Regards
Samuel

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Samuel Stirtzel]

Pasted wrong link sorry, here is the right one:
http://www.omappedia.com/wiki/Minimal-FS_SD_Configuration

2011/10/13 Samuel Stirtzel <s.stirtzel@googlemail.com>:
> Hi,
> currently I try to get a Pandaboard to boot out of Barebox, so far I
> got Barebox up and running.
>
>
> For testing purpose I'd like to boot from a SD card, optimal would be
> if I could set up the card like the description in the Omappedia
> tutorial [1].
> Is there a tutorial how to set up barebox to boot from SD cards?
>
>
> What I already tried:
>
> In the configuration file from arch/arm/boards/panda/env is the
> description for a network boot configuration,
> I used this file to start out and wanted to boot from the barebox prompt.
>
> Barebox is build from my toolchain and i copy the MLO file, the
> barebox.bin and the bareboxenv file to the boot partition of the card.
> For convenience I currently use a precompiled MLO that has been made
> for u-boot thus I just renamed the barebox.bin file to u-boot.bin.
>
> On startup the following messages were displayed:
> -
> Texas Instruments X-Loader 1.5.1 (Sep  6 2011 - 13:37:48)
> Reading boot sector
> Loading u-boot.bin from mmc
>
>
> barebox 2011.10.0 (Oct 13 2011 - 09:45:17)
>
> Board: Texas Instrument's Panda
> PandaBoard Revision: 003
> ehci@ehci0: USB EHCI 1.00
> Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB)
> Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB)
> running /env/bin/init...
> not found
> -
> For me it looks like i forgot to copy a file or something, any advice?
>
>
> Although booting the uImage with bootm looks ok it won't work, the
> following message was displayed:
> -
> Verifying Checksum ... OK
>   Image Name:   Angstrom/2.6.35.7/omap4430-panda
>   Image Type:   ARM Linux Kernel Image (uncompressed)
>   Data Size:    3688408 Bytes =  3.5 MB
>   Load Address: 80008000
>   Entry Point:  80008000
> OK
>
> Starting kernel ...
>
> commandline: <NULL>
> arch_number: 2791
> Uncompressing Linux... done, booting the kernel.
> -
> The screen just stays blank after the last message.
> This looks to me like it is (obviously) caused by an incorrect
> environment loaded.
>
>
> Help would be appreciated.
>
> [1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2
> partitions, one for boot files and the other for the rootfs)
>
> --
> Regards
> Samuel
>



-- 
Regards
Samuel

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Fabian van der Werf]

On Thu, Oct 13, 2011 at 10:49 AM, Samuel Stirtzel
<s.stirtzel@googlemail.com> wrote:
>
> Starting kernel ...
>
> commandline: <NULL>
> arch_number: 2791
> Uncompressing Linux... done, booting the kernel.
>
> -
> The screen just stays blank after the last message.
> This looks to me like it is (obviously) caused by an incorrect
> environment loaded.
>
>
> Help would be appreciated.

Hi

I am also trying to get things up and running using barebox. I am at
about the same stage where you are. Though I am loading the kernel
over TFTP instead from SD. Like you, I get "Uncompressing Linux...
done, booting the kernel" and then nothing.

Note that this last line is not printed by barebox but by the kernel.
There is a separate kernel build option to enable a console on the
omap serial port. Then you still need to add console=ttyOx,115200n8 to
your boot arguments. I think it needs to be ttyO2, though I am not
sure. I haven't had the time yet to try these options (it's just for a
hobby project).


>
> [1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2
> partitions, one for boot files and the other for the rootfs)
>
> --
> Regards
> Samuel
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebo


Regards,

Fabian

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Samuel Stirtzel]

2011/10/13 Fabian van der Werf <fvanderwerf@gmail.com>:
> On Thu, Oct 13, 2011 at 10:49 AM, Samuel Stirtzel
> <s.stirtzel@googlemail.com> wrote:
>>
>> Starting kernel ...
>>
>> commandline: <NULL>
>> arch_number: 2791
>> Uncompressing Linux... done, booting the kernel.
>>
>> -
>> The screen just stays blank after the last message.
>> This looks to me like it is (obviously) caused by an incorrect
>> environment loaded.
>>
>>
>> Help would be appreciated.
>
> Hi
>
> I am also trying to get things up and running using barebox. I am at
> about the same stage where you are. Though I am loading the kernel
> over TFTP instead from SD. Like you, I get "Uncompressing Linux...
> done, booting the kernel" and then nothing.

Well it is not the problem, I know that my kernel args are missing,
I'm just missing informations about how i can pass them to the kernel.
With u-boot the following command would get passed for the SD card:
setenv bootargs console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw
rootfstype=ext3 rootwait

Another question, is it possible to set these variables without
altering the Barebox files (like at run time or between configuring
and compiling).

>
> Note that this last line is not printed by barebox but by the kernel.
> There is a separate kernel build option to enable a console on the
> omap serial port. Then you still need to add console=ttyOx,115200n8 to
> your boot arguments. I think it needs to be ttyO2, though I am not
> sure. I haven't had the time yet to try these options (it's just for a
> hobby project).
>
>
>>
>> [1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2
>> partitions, one for boot files and the other for the rootfs)
>>
>> --
>> Regards
>> Samuel
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebo
>
>
> Regards,
>
> Fabian
>



-- 
Regards
Samuel

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Uwe Kleine-König]

Hello,

On Thu, Oct 13, 2011 at 11:14:17AM +0200, Fabian van der Werf wrote:
> On Thu, Oct 13, 2011 at 10:49 AM, Samuel Stirtzel
> <s.stirtzel@googlemail.com> wrote:
> >
> > Starting kernel ...
> >
> > commandline: <NULL>
> > arch_number: 2791
> > Uncompressing Linux... done, booting the kernel.
> >
> > -
> > The screen just stays blank after the last message.
> > This looks to me like it is (obviously) caused by an incorrect
> > environment loaded.
> >
> >
> > Help would be appreciated.
> 
> Hi
> 
> I am also trying to get things up and running using barebox. I am at
> about the same stage where you are. Though I am loading the kernel
> over TFTP instead from SD. Like you, I get "Uncompressing Linux...
> done, booting the kernel" and then nothing.
> 
> Note that this last line is not printed by barebox but by the kernel.
> There is a separate kernel build option to enable a console on the
> omap serial port. Then you still need to add console=ttyOx,115200n8 to
> your boot arguments. I think it needs to be ttyO2, though I am not
> sure. I haven't had the time yet to try these options (it's just for a
> hobby project).
You might want to enable DEBUG_LL and EARLY_PRINTK in your kernel and
pass "earlyprintk" on the commandline. This is usually enough to provide
some output after Uncompressing Linux...

Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Samuel Stirtzel]

2011/10/13 Samuel Stirtzel <s.stirtzel@googlemail.com>:
>
> Well it is not the problem, I know that my kernel args are missing,
> I'm just missing informations about how i can pass them to the kernel.
Ok maybe I stated this wrong, because my env config has my bootargs,
I'm missing why they don't get loaded.

Currently this is my main problem:
running /env/bin/init...
not found

-- 
Regards
Samuel

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Sascha Hauer]

On Thu, Oct 13, 2011 at 10:49:30AM +0200, Samuel Stirtzel wrote:
> Hi,
> currently I try to get a Pandaboard to boot out of Barebox, so far I
> got Barebox up and running.
> 
> 
> For testing purpose I'd like to boot from a SD card, optimal would be
> if I could set up the card like the description in the Omappedia
> tutorial [1].
> Is there a tutorial how to set up barebox to boot from SD cards?
> 
> 
> What I already tried:
> 
> In the configuration file from arch/arm/boards/panda/env is the
> description for a network boot configuration,
> I used this file to start out and wanted to boot from the barebox prompt.
> 
> Barebox is build from my toolchain and i copy the MLO file, the
> barebox.bin and the bareboxenv file to the boot partition of the card.
> For convenience I currently use a precompiled MLO that has been made
> for u-boot thus I just renamed the barebox.bin file to u-boot.bin.
> 
> On startup the following messages were displayed:
> -
> Texas Instruments X-Loader 1.5.1 (Sep  6 2011 - 13:37:48)
> Reading boot sector
> Loading u-boot.bin from mmc
> 
> 
> barebox 2011.10.0 (Oct 13 2011 - 09:45:17)
> 
> Board: Texas Instrument's Panda
> PandaBoard Revision: 003
> ehci@ehci0: USB EHCI 1.00
> Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB)
> Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB)
> running /env/bin/init...
> not found
> -
> For me it looks like i forgot to copy a file or something, any advice?

I just compiled the current master branch with panda_defconfig and this
does not happen on my board. Instead I get a null pointer exception in
the mmc driver. I just sent out a patch which fixes this.

Have you changed your config?

> 
> 
> Although booting the uImage with bootm looks ok it won't work, the
> following message was displayed:
> -
> Verifying Checksum ... OK
>    Image Name:   Angstrom/2.6.35.7/omap4430-panda
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    3688408 Bytes =  3.5 MB
>    Load Address: 80008000
>    Entry Point:  80008000
> OK
> 
> Starting kernel ...
> 
> commandline: <NULL>
> arch_number: 2791
> Uncompressing Linux... done, booting the kernel.

Does not work for me aswell, although with a current v3.1-rc9 kernel.
Here's what I get with earlyprintk:

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 3.1.0-rc9 (sha@dude) (gcc version 4.5.2 (OSELAS.Toolchain-2011.03.1) ) #100 SMP Thu Oct 13 17:15:10 CEST 2011
[    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: OMAP4 Panda board
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region overlap).
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4430 ES2.1
[    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
[    0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
[    0.000000] PERCPU: Embedded 8 pages/cpu @c11d2000 s10112 r8192 d14464 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195072
[    0.000000] Kernel command line: console=ttyO2,115200 earlyprintk ip=dhcp root=/dev/nfs nfsroot=:/path/to/nfs/root,v3,tcp noinitrd
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 768MB = 768MB total
[    0.000000] Memory: 767332k/767332k available, 19100k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05a05ec   (5730 kB)
[    0.000000]       .init : 0xc05a1000 - 0xc05ea780   ( 294 kB)
[    0.000000]       .data : 0xc05ec000 - 0xc066f650   ( 526 kB)
[    0.000000]        .bss : 0xc066f674 - 0xc0bc46d4   (5461 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:410
[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.056945] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[    0.129821] pid_max: default: 32768 minimum: 301
[    0.135498] Security Framework initialized
[    0.140075] Mount-cache hash table entries: 512
[    0.149627] CPU: Testing write buffer coherency: ok
[    0.155822] Calibrating local timer... 292.80MHz.
[    0.206359] L310 cache controller enabled
[    0.210571] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[    0.222747] CPU1: Booted secondary processor
[    0.222778] CPU1: Unknown IPI message 0x1
[    0.252319] Brought up 2 CPUs
[    0.264129] SMP: Total of 2 processors activated (2359.07 BogoMIPS).
[    0.282196] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[    0.292572] omap_hwmod: dmm: _wait_target_disable failed
[    0.300781] omap_hwmod: emif_fw: _wait_target_disable failed
[    0.309356] omap_hwmod: l3_main_1: _wait_target_disable failed
[    0.318115] omap_hwmod: l3_main_2: _wait_target_disable failed
[    0.326873] omap_hwmod: l4_abe: _wait_target_disable failed
[    0.335327] omap_hwmod: l4_cfg: _wait_target_disable failed
[    0.343811] omap_hwmod: l4_per: _wait_target_disable failed
[    0.352783] omap_hwmod: l4_wkup: _wait_target_disable failed
[    0.361358] omap_hwmod: dma_system: _wait_target_disable failed
[    0.370269] omap_hwmod: dss_core: _wait_target_disable failed
[    0.378936] omap_hwmod: dss_dispc: _wait_target_disable failed
[    0.387695] omap_hwmod: dss_dsi1: _wait_target_disable failed
[    0.396331] omap_hwmod: dss_dsi2: _wait_target_disable failed
[    0.405029] omap_hwmod: dss_hdmi: _wait_target_disable failed
[    0.413696] omap_hwmod: dss_rfbi: _wait_target_disable failed
[    0.422332] omap_hwmod: dss_venc: _wait_target_disable failed
[    0.432250] omap_hwmod: mailbox: _wait_target_disable failed
[    0.441192] omap_hwmod: spinlock: _wait_target_disable failed
[    0.452972] print_constraints: dummy: 
[    0.458374] NET: Registered protocol family 16
[    0.463745] GPMC revision 6.0
[   59.033691] INFO: rcu_sched_state detected stall on CPU 0 (t=7680 jiffies)

After this no more messages.

Haven't investigated further so far, but maybe the kernel expects some GPMC
registers to be set correctly.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Fabian van der Werf]

>
> Currently this is my main problem:
> running /env/bin/init...
> not found

init is part of the default barebox environment, you can find it in
the source tree under defaultenv. If you have your own environment it
should bring its own init.

Regards,
Fabian

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Booting Pandaboard from SD card

[Samuel Stirtzel]

2011/10/13 Sascha Hauer <s.hauer@pengutronix.de>:
> On Thu, Oct 13, 2011 at 10:49:30AM +0200, Samuel Stirtzel wrote:
>> Hi,
>> currently I try to get a Pandaboard to boot out of Barebox, so far I
>> got Barebox up and running.
>>
>>
>> For testing purpose I'd like to boot from a SD card, optimal would be
>> if I could set up the card like the description in the Omappedia
>> tutorial [1].
>> Is there a tutorial how to set up barebox to boot from SD cards?
>>
>>
>> What I already tried:
>>
>> In the configuration file from arch/arm/boards/panda/env is the
>> description for a network boot configuration,
>> I used this file to start out and wanted to boot from the barebox prompt.
>>
>> Barebox is build from my toolchain and i copy the MLO file, the
>> barebox.bin and the bareboxenv file to the boot partition of the card.
>> For convenience I currently use a precompiled MLO that has been made
>> for u-boot thus I just renamed the barebox.bin file to u-boot.bin.
>>
>> On startup the following messages were displayed:
>> -
>> Texas Instruments X-Loader 1.5.1 (Sep  6 2011 - 13:37:48)
>> Reading boot sector
>> Loading u-boot.bin from mmc
>>
>>
>> barebox 2011.10.0 (Oct 13 2011 - 09:45:17)
>>
>> Board: Texas Instrument's Panda
>> PandaBoard Revision: 003
>> ehci@ehci0: USB EHCI 1.00
>> Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB)
>> Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB)
>> running /env/bin/init...
>> not found
>> -
>> For me it looks like i forgot to copy a file or something, any advice?
>
> I just compiled the current master branch with panda_defconfig and this
> does not happen on my board. Instead I get a null pointer exception in
> the mmc driver. I just sent out a patch which fixes this.
Like Fabian hinted, i used the version with the 2011.10.0 tag and
applied the unaligned access patch.

>
> Have you changed your config?

Only the boot arguments have been changed, I used the tool bareboxenv,
something like:
./scripts/bareboxenv ./arch/arm/boards/panda/env/ ~/barebox-test/myenv-panda
and copied it as bareboxenv to the SD card.

This step was shown in a tutorial (can't find the link right now),
should I use the defaultenv instead?
If I would use the defaultenv, can I do it like:
scripts/bareboxenv ./defaultenv/ ~/barebox-test/myenv-panda
Or is there another way to do it?

>
>>
>>
>> Although booting the uImage with bootm looks ok it won't work, the
>> following message was displayed:
>> -
>> Verifying Checksum ... OK
>>    Image Name:   Angstrom/2.6.35.7/omap4430-panda
>>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>    Data Size:    3688408 Bytes =  3.5 MB
>>    Load Address: 80008000
>>    Entry Point:  80008000
>> OK
>>
>> Starting kernel ...
>>
>> commandline: <NULL>
>> arch_number: 2791
>> Uncompressing Linux... done, booting the kernel.
>
> Does not work for me aswell, although with a current v3.1-rc9 kernel.
> Here's what I get with earlyprintk:
>
> Uncompressing Linux... done, booting the kernel.
> [    0.463745] GPMC revision 6.0
> [   59.033691] INFO: rcu_sched_state detected stall on CPU 0 (t=7680 jiffies)
>
> After this no more messages.
>
> Haven't investigated further so far, but maybe the kernel expects some GPMC
> registers to be set correctly.
I disabled GPMC in the kernel, with u-boot it worked* on my 2.6.35
Linux (plus some TI patches).

* Not totally since I got framebuffer problems, but that is another
problem and not the fault of the bootloader.

>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>



-- 
Regards
Samuel

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox