mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Fabian van der Werf <fvanderwerf@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] usb: fix unaligned access
Date: Sat, 22 Oct 2011 22:20:35 +0200	[thread overview]
Message-ID: <20111022202035.GK23421@pengutronix.de> (raw)
In-Reply-To: <1319289593-15251-1-git-send-email-fvanderwerf@gmail.com>

On Sat, Oct 22, 2011 at 03:19:53PM +0200, Fabian van der Werf wrote:
> ---
>  drivers/usb/core/usb.c      |   12 +++++++-----
>  drivers/usb/host/ehci-hcd.c |    9 +++++++--
>  2 files changed, 14 insertions(+), 7 deletions(-)

Looks like a valid patch, I wonder that this never was a problem before.
ARM should break here aswell I think. What architecture are you using?

Sascha

> 
> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> index 7039a2c..369a393 100644
> --- a/drivers/usb/core/usb.c
> +++ b/drivers/usb/core/usb.c
> @@ -50,6 +50,7 @@
>  #include <driver.h>
>  #include <linux/ctype.h>
>  #include <asm/byteorder.h>
> +#include <asm/unaligned.h>
>  #include <xfuncs.h>
>  #include <init.h>
>  
> @@ -1071,6 +1072,7 @@ static int usb_hub_configure(struct usb_device *dev)
>  	struct usb_hub_status *hubsts;
>  	int i;
>  	struct usb_hub_device *hub;
> +	unsigned short hub_chars;
>  
>  	hub = xzalloc(sizeof (*hub));
>  	dev->hub = hub;
> @@ -1100,8 +1102,8 @@ static int usb_hub_configure(struct usb_device *dev)
>  	}
>  	memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
>  	/* adjust 16bit values */
> -	hub->desc.wHubCharacteristics =
> -				le16_to_cpu(descriptor->wHubCharacteristics);
> +	hub_chars = le16_to_cpu(get_unaligned(&descriptor->wHubCharacteristics));
> +	put_unaligned(hub_chars, &hub->desc.wHubCharacteristics);
>  	/* set the bitmap */
>  	bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
>  	/* devices not removable by default */
> @@ -1118,7 +1120,7 @@ static int usb_hub_configure(struct usb_device *dev)
>  	dev->maxchild = descriptor->bNbrPorts;
>  	USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
>  
> -	switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
> +	switch (hub_chars & HUB_CHAR_LPSM) {
>  	case 0x00:
>  		USB_HUB_PRINTF("ganged power switching\n");
>  		break;
> @@ -1131,12 +1133,12 @@ static int usb_hub_configure(struct usb_device *dev)
>  		break;
>  	}
>  
> -	if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
> +	if (hub_chars & HUB_CHAR_COMPOUND)
>  		USB_HUB_PRINTF("part of a compound device\n");
>  	else
>  		USB_HUB_PRINTF("standalone hub\n");
>  
> -	switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
> +	switch (hub_chars & HUB_CHAR_OCPM) {
>  	case 0x00:
>  		USB_HUB_PRINTF("global over-current protection\n");
>  		break;
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index 72f1c14..20c518a 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -33,6 +33,7 @@
>  #include <errno.h>
>  #include <usb/ehci.h>
>  #include <asm/mmu.h>
> +#include <asm/unaligned.h>
>  
>  #include "ehci.h"
>  
> @@ -795,6 +796,7 @@ static int ehci_init(struct usb_host *host)
>  	struct ehci_priv *ehci = to_ehci(host);
>  	uint32_t reg;
>  	uint32_t cmd;
> +	unsigned short hub_chars;
>  
>  	ehci_halt(ehci);
>  
> @@ -819,12 +821,15 @@ static int ehci_init(struct usb_host *host)
>  	reg = ehci_readl(&ehci->hccr->cr_hcsparams);
>  	descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
>  
> +	hub_chars = get_unaligned(&descriptor.hub.wHubCharacteristics);
>  	/* Port Indicators */
>  	if (HCS_INDICATOR(reg))
> -		descriptor.hub.wHubCharacteristics |= 0x80;
> +		hub_chars |= 0x80;
>  	/* Port Power Control */
>  	if (HCS_PPC(reg))
> -		descriptor.hub.wHubCharacteristics |= 0x01;
> +		hub_chars |= 0x01;
> +
> +	put_unaligned(hub_chars, &descriptor.hub.wHubCharacteristics);
>  
>  	/* Start the host controller. */
>  	cmd = ehci_readl(&ehci->hcor->or_usbcmd);
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-10-22 20:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-22 13:19 Fabian van der Werf
2011-10-22 20:20 ` Sascha Hauer [this message]
2011-10-23  9:29   ` Fabian van der Werf
2011-10-24 15:14     ` Antony Pavlov
2011-10-24 17:07       ` Sascha Hauer
2011-10-24 18:37         ` Fabian van der Werf
2011-10-24 19:02           ` Eric Bénard
2011-10-24 19:30             ` Sascha Hauer
2011-10-24 19:42               ` Eric Bénard
2011-10-25 18:36                 ` Fabian van der Werf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111022202035.GK23421@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=fvanderwerf@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox