mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [RFC] Prepare to add more Samsung S3C CPUs to barebox
@ 2011-11-26 20:22 Juergen Beisert
  2011-11-26 20:22 ` [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future Juergen Beisert
                   ` (13 more replies)
  0 siblings, 14 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

This patch series tries to make the current Samsung S3C24XX CPU and platform
support more generic to be able to add Samsung's more recent S3C CPUs (S3C64XX
for example). Some drivers can be shared between members in the S3C family of
processors, so the drivers get a s3c in their names to reflect it. But some
parts stick to their processor. To avoid an ifdef hell, I moved these parts
into separte files.

Comments are welcome.


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally Juergen Beisert
                   ` (12 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

The S3Cxxxx family consists of ARMv4, ARMv5 and ARMv6 types of CPU cores. The
S3C24xx sub family is only one of it. To be able to handle all CPUs in one mach
directory, use a more generic name for it.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Kconfig                                   |    3 ++-
 arch/arm/Makefile                                  |    2 +-
 arch/arm/{mach-s3c24xx => mach-samsung}/Kconfig    |   15 ++++++++++++---
 arch/arm/{mach-s3c24xx => mach-samsung}/Makefile   |    0
 arch/arm/{mach-s3c24xx => mach-samsung}/generic.c  |    0
 .../{mach-s3c24xx => mach-samsung}/gpio-s3c24x0.c  |    0
 .../include/mach/fb.h                              |    0
 .../include/mach/gpio.h                            |    0
 .../include/mach/iomux-s3c24x0.h                   |    0
 .../include/mach/mci.h                             |    0
 .../include/mach/s3c24x0-iomap.h                   |    0
 .../include/mach/s3c24x0-nand.h                    |    0
 .../include/mach/s3c24xx-generic.h                 |    0
 .../{mach-s3c24xx => mach-samsung}/lowlevel-init.S |    0
 14 files changed, 15 insertions(+), 5 deletions(-)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/Kconfig (91%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/Makefile (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/generic.c (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/gpio-s3c24x0.c (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/fb.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/gpio.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/iomux-s3c24x0.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/mci.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/s3c24x0-iomap.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/s3c24x0-nand.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/include/mach/s3c24xx-generic.h (100%)
 rename arch/arm/{mach-s3c24xx => mach-samsung}/lowlevel-init.S (100%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b15728e..843b7e8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -64,6 +64,7 @@ config ARCH_OMAP
 
 config ARCH_S3C24xx
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	select ARCH_SAMSUNG
 	select CPU_ARM920T
 	select GENERIC_GPIO
 
@@ -81,7 +82,7 @@ source arch/arm/mach-mxs/Kconfig
 source arch/arm/mach-netx/Kconfig
 source arch/arm/mach-nomadik/Kconfig
 source arch/arm/mach-omap/Kconfig
-source arch/arm/mach-s3c24xx/Kconfig
+source arch/arm/mach-samsung/Kconfig
 source arch/arm/mach-versatile/Kconfig
 
 config ARM_ASM_UNIFIED
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0c42f3d..5efcc0e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -50,7 +50,7 @@ machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_OMAP)		:= omap
-machine-$(CONFIG_ARCH_S3C24xx)		:= s3c24xx
+machine-$(CONFIG_ARCH_SAMSUNG)		:= samsung
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 
 # Board directory name.  This list is sorted alphanumerically
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-samsung/Kconfig
similarity index 91%
rename from arch/arm/mach-s3c24xx/Kconfig
rename to arch/arm/mach-samsung/Kconfig
index 80b65fb..a800cb8 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -1,14 +1,21 @@
-if ARCH_S3C24xx
+config ARCH_SAMSUNG
+	bool
+
+if ARCH_SAMSUNG
 
 config ARCH_TEXT_BASE
 	hex
-	default 0x31fc0000
+	default 0x31fc0000 if MACH_MINI2440
+	default 0x31fc0000 if MACH_A9M2440
+	default 0x31fc0000 if MACH_A9M2410
 
 config BOARDINFO
 	default "Mini 2440"    if MACH_MINI2440
 	default "Digi A9M2440" if MACH_A9M2440
 	default "Digi A9M2410" if MACH_A9M2410
 
+if ARCH_S3C24xx
+
 config CPU_S3C2410
 	bool
 
@@ -67,7 +74,7 @@ config MACH_A9M2410DEV
 
 endchoice
 
-source arch/arm/boards/mini2440/Kconfig 
+source arch/arm/boards/mini2440/Kconfig
 
 endmenu
 
@@ -106,3 +113,5 @@ config S3C24XX_NAND_BOOT
 endmenu
 
 endif
+
+endif
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-samsung/Makefile
similarity index 100%
rename from arch/arm/mach-s3c24xx/Makefile
rename to arch/arm/mach-samsung/Makefile
diff --git a/arch/arm/mach-s3c24xx/generic.c b/arch/arm/mach-samsung/generic.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/generic.c
rename to arch/arm/mach-samsung/generic.c
diff --git a/arch/arm/mach-s3c24xx/gpio-s3c24x0.c b/arch/arm/mach-samsung/gpio-s3c24x0.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/gpio-s3c24x0.c
rename to arch/arm/mach-samsung/gpio-s3c24x0.c
diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-samsung/include/mach/fb.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/fb.h
rename to arch/arm/mach-samsung/include/mach/fb.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-samsung/include/mach/gpio.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/gpio.h
rename to arch/arm/mach-samsung/include/mach/gpio.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h b/arch/arm/mach-samsung/include/mach/iomux-s3c24x0.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h
rename to arch/arm/mach-samsung/include/mach/iomux-s3c24x0.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/mci.h b/arch/arm/mach-samsung/include/mach/mci.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/mci.h
rename to arch/arm/mach-samsung/include/mach/mci.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c24x0-iomap.h b/arch/arm/mach-samsung/include/mach/s3c24x0-iomap.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/s3c24x0-iomap.h
rename to arch/arm/mach-samsung/include/mach/s3c24x0-iomap.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c24x0-nand.h b/arch/arm/mach-samsung/include/mach/s3c24x0-nand.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/s3c24x0-nand.h
rename to arch/arm/mach-samsung/include/mach/s3c24x0-nand.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c24xx-generic.h b/arch/arm/mach-samsung/include/mach/s3c24xx-generic.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/s3c24xx-generic.h
rename to arch/arm/mach-samsung/include/mach/s3c24xx-generic.h
diff --git a/arch/arm/mach-s3c24xx/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
similarity index 100%
rename from arch/arm/mach-s3c24xx/lowlevel-init.S
rename to arch/arm/mach-samsung/lowlevel-init.S
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
  2011-11-26 20:22 ` [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates Juergen Beisert
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 88d45fe..f329cdb 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,2 +1,3 @@
-obj-y += generic.o gpio-s3c24x0.o
+obj-y += generic.o
+obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o
 obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
  2011-11-26 20:22 ` [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future Juergen Beisert
  2011-11-26 20:22 ` [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect driver's usage Juergen Beisert
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

Start with renaming files to share them in the S3C CPU family,

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                  |    2 +-
 arch/arm/boards/a9m2410/lowlevel_init.S            |    2 +-
 arch/arm/boards/a9m2440/a9m2410dev.c               |    2 +-
 arch/arm/boards/a9m2440/a9m2440.c                  |    4 +-
 arch/arm/boards/a9m2440/lowlevel_init.S            |    2 +-
 arch/arm/boards/mini2440/lowlevel_init.S           |    2 +-
 arch/arm/boards/mini2440/mini2440.c                |    6 ++--
 arch/arm/mach-samsung/generic.c                    |    2 +-
 arch/arm/mach-samsung/gpio-s3c24x0.c               |    4 +-
 arch/arm/mach-samsung/include/mach/gpio.h          |   15 +--------
 .../mach/{s3c24xx-generic.h => s3c-generic.h}      |    0
 arch/arm/mach-samsung/include/mach/s3c-gpio.h      |   31 ++++++++++++++++++++
 .../include/mach/{s3c24x0-iomap.h => s3c-iomap.h}  |    0
 arch/arm/mach-samsung/lowlevel-init.S              |    2 +-
 drivers/mci/s3c.c                                  |    4 +-
 drivers/mtd/nand/nand_s3c2410.c                    |    4 +-
 drivers/serial/serial_s3c24x0.c                    |    4 +-
 drivers/video/s3c.c                                |    4 +-
 18 files changed, 55 insertions(+), 35 deletions(-)
 rename arch/arm/mach-samsung/include/mach/{s3c24xx-generic.h => s3c-generic.h} (100%)
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c-gpio.h
 rename arch/arm/mach-samsung/include/mach/{s3c24x0-iomap.h => s3c-iomap.h} (100%)

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index bbe1604..14eaa1b 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -32,7 +32,7 @@
 #include <partition.h>
 #include <nand.h>
 #include <io.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 #include <mach/s3c24x0-nand.h>
 
 // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S
index 461b93c..752c668 100644
--- a/arch/arm/boards/a9m2410/lowlevel_init.S
+++ b/arch/arm/boards/a9m2410/lowlevel_init.S
@@ -3,7 +3,7 @@
  */
 
 #include <config.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 	.section ".text_bare_init.board_init_lowlevel","ax"
 
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
index 5f7c53b..aa5da88 100644
--- a/arch/arm/boards/a9m2440/a9m2410dev.c
+++ b/arch/arm/boards/a9m2440/a9m2410dev.c
@@ -28,7 +28,7 @@
 #include <driver.h>
 #include <init.h>
 #include <io.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 /**
  * Initialize the CPU to be able to work with the a9m2410dev evaluation board
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 964d376..9002052 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -32,9 +32,9 @@
 #include <partition.h>
 #include <nand.h>
 #include <io.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 #include <mach/s3c24x0-nand.h>
-#include <mach/s3c24xx-generic.h>
+#include <mach/s3c-generic.h>
 
 #include "baseboards.h"
 
diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
index 4b5c596..bfdd7f0 100644
--- a/arch/arm/boards/a9m2440/lowlevel_init.S
+++ b/arch/arm/boards/a9m2440/lowlevel_init.S
@@ -3,7 +3,7 @@
  */
 
 #include <config.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 	.section ".text_bare_init.board_init_lowlevel","ax"
 
diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S
index 41f50cb..f114bb7 100644
--- a/arch/arm/boards/mini2440/lowlevel_init.S
+++ b/arch/arm/boards/mini2440/lowlevel_init.S
@@ -3,7 +3,7 @@
  */
 
 #include <config.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 	.section ".text_bare_init.board_init_lowlevel","ax"
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index b4cc0f8..f84e23c 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -37,10 +37,10 @@
 #include <fb.h>
 #include <asm/armlinux.h>
 #include <io.h>
-#include <mach/gpio.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-gpio.h>
+#include <mach/s3c-iomap.h>
 #include <mach/s3c24x0-nand.h>
-#include <mach/s3c24xx-generic.h>
+#include <mach/s3c-generic.h>
 #include <mach/mci.h>
 #include <mach/fb.h>
 
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index d2f2ac7..3c24b1a 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -27,7 +27,7 @@
 #include <init.h>
 #include <clock.h>
 #include <io.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 /**
  * Calculate the current M-PLL clock.
diff --git a/arch/arm/mach-samsung/gpio-s3c24x0.c b/arch/arm/mach-samsung/gpio-s3c24x0.c
index 946ec33..9994c92 100644
--- a/arch/arm/mach-samsung/gpio-s3c24x0.c
+++ b/arch/arm/mach-samsung/gpio-s3c24x0.c
@@ -18,8 +18,8 @@
 #include <common.h>
 #include <errno.h>
 #include <io.h>
-#include <mach/s3c24x0-iomap.h>
-#include <mach/gpio.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-gpio.h>
 
 static const unsigned char group_offset[] =
 {
diff --git a/arch/arm/mach-samsung/include/mach/gpio.h b/arch/arm/mach-samsung/include/mach/gpio.h
index 37db4f5..5e0844e 100644
--- a/arch/arm/mach-samsung/include/mach/gpio.h
+++ b/arch/arm/mach-samsung/include/mach/gpio.h
@@ -8,24 +8,13 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #ifndef __ASM_MACH_GPIO_H
 #define __ASM_MACH_GPIO_H
 
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2410)
-# include <mach/iomux-s3c24x0.h>
+#ifdef CONFIG_ARCH_S3C24xx
+# include <mach/s3c-gpio.h>
 #endif
 
-void gpio_set_value(unsigned, int);
-int gpio_direction_input(unsigned);
-int gpio_direction_output(unsigned, int);
-int gpio_get_value(unsigned);
-void s3c_gpio_mode(unsigned);
-
 #endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c24xx-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
similarity index 100%
rename from arch/arm/mach-samsung/include/mach/s3c24xx-generic.h
rename to arch/arm/mach-samsung/include/mach/s3c-generic.h
diff --git a/arch/arm/mach-samsung/include/mach/s3c-gpio.h b/arch/arm/mach-samsung/include/mach/s3c-gpio.h
new file mode 100644
index 0000000..dc22c6e
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c-gpio.h
@@ -0,0 +1,31 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_MACH_S3C_GPIO_H
+#define __ASM_MACH_S3C_GPIO_H
+
+#ifdef CONFIG_ARCH_S3C24xx
+# include <mach/iomux-s3c24x0.h>
+#endif
+
+void gpio_set_value(unsigned, int);
+int gpio_direction_input(unsigned);
+int gpio_direction_output(unsigned, int);
+int gpio_get_value(unsigned);
+void s3c_gpio_mode(unsigned);
+
+#endif /* __ASM_MACH_S3C_GPIO_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c24x0-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
similarity index 100%
rename from arch/arm/mach-samsung/include/mach/s3c24x0-iomap.h
rename to arch/arm/mach-samsung/include/mach/s3c-iomap.h
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
index e8004e5..8529283 100644
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ b/arch/arm/mach-samsung/lowlevel-init.S
@@ -19,7 +19,7 @@
  */
 
 #include <config.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-iomap.h>
 
 	.section ".text_bare_init.s3c24x0_disable_wd","ax"
 
diff --git a/drivers/mci/s3c.c b/drivers/mci/s3c.c
index f97e13a..f4011d9 100644
--- a/drivers/mci/s3c.c
+++ b/drivers/mci/s3c.c
@@ -41,8 +41,8 @@
 #include <clock.h>
 #include <io.h>
 #include <mach/mci.h>
-#include <mach/s3c24xx-generic.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-iomap.h>
 
 #define SDICON 0x0
 # define SDICON_SDRESET (1 << 8)
diff --git a/drivers/mtd/nand/nand_s3c2410.c b/drivers/mtd/nand/nand_s3c2410.c
index c5f5d97..facdeee 100644
--- a/drivers/mtd/nand/nand_s3c2410.c
+++ b/drivers/mtd/nand/nand_s3c2410.c
@@ -30,8 +30,8 @@
 #include <init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
-#include <mach/s3c24xx-generic.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-iomap.h>
 #include <mach/s3c24x0-nand.h>
 #include <io.h>
 #include <asm-generic/errno.h>
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index abc08e0..8e6bb0c 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -25,8 +25,8 @@
 #include <init.h>
 #include <malloc.h>
 #include <io.h>
-#include <mach/s3c24xx-generic.h>
-#include <mach/s3c24x0-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-iomap.h>
 
 /* Note: Offsets are for little endian access */
 #define ULCON 0x00		/* line control */
diff --git a/drivers/video/s3c.c b/drivers/video/s3c.c
index b17aeb6..b605c42 100644
--- a/drivers/video/s3c.c
+++ b/drivers/video/s3c.c
@@ -30,8 +30,8 @@
 #include <malloc.h>
 #include <errno.h>
 #include <io.h>
-#include <mach/gpio.h>
-#include <mach/s3c24xx-generic.h>
+#include <mach/s3c-gpio.h>
+#include <mach/s3c-generic.h>
 #include <mach/fb.h>
 
 #define LCDCON1 0x00
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect driver's usage
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (2 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 05/14] MACH SAMSUNG/S3C: The SDHC driver can be shared in the S3C CPU family Juergen Beisert
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

The aready existing NAND controller driver in Barebox is for the S3C24XX family
only. Change the name of the file to reflect this fact (and free the way to add
more recent Samsung NAND controllers)

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                  |    2 +-
 arch/arm/boards/a9m2440/a9m2440.c                  |    2 +-
 arch/arm/boards/mini2440/mini2440.c                |    2 +-
 arch/arm/mach-samsung/Kconfig                      |    2 +-
 .../mach/{s3c24x0-nand.h => s3c24xx-nand.h}        |    0
 drivers/mtd/nand/Kconfig                           |    4 ++--
 drivers/mtd/nand/Makefile                          |    2 +-
 .../mtd/nand/{nand_s3c2410.c => nand_s3c24xx.c}    |    4 ++--
 8 files changed, 9 insertions(+), 9 deletions(-)
 rename arch/arm/mach-samsung/include/mach/{s3c24x0-nand.h => s3c24xx-nand.h} (100%)
 rename drivers/mtd/nand/{nand_s3c2410.c => nand_s3c24xx.c} (99%)

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index 14eaa1b..989dcf7 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -33,7 +33,7 @@
 #include <nand.h>
 #include <io.h>
 #include <mach/s3c-iomap.h>
-#include <mach/s3c24x0-nand.h>
+#include <mach/s3c24xx-nand.h>
 
 // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
 static struct s3c24x0_nand_platform_data nand_info = {
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 9002052..1986efb 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -33,7 +33,7 @@
 #include <nand.h>
 #include <io.h>
 #include <mach/s3c-iomap.h>
-#include <mach/s3c24x0-nand.h>
+#include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
 
 #include "baseboards.h"
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index f84e23c..ad90852 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -39,7 +39,7 @@
 #include <io.h>
 #include <mach/s3c-gpio.h>
 #include <mach/s3c-iomap.h>
-#include <mach/s3c24x0-nand.h>
+#include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
 #include <mach/mci.h>
 #include <mach/fb.h>
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index a800cb8..bc283dc 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -105,7 +105,7 @@ config S3C24XX_NAND_BOOT
 	prompt "Booting from NAND"
 	select MTD
 	select NAND
-	select NAND_S3C24X0
+	select NAND_S3C24XX
 	help
 	  Add generic support to boot from NAND flash. Image loading will be
 	  skipped if the code is running from NOR or already from SDRAM.
diff --git a/arch/arm/mach-samsung/include/mach/s3c24x0-nand.h b/arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
similarity index 100%
rename from arch/arm/mach-samsung/include/mach/s3c24x0-nand.h
rename to arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 20f9f33..a56b40e 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -71,9 +71,9 @@ config NAND_ATMEL
 	prompt "Atmel (AT91SAM9xxx) NAND driver"
 	depends on ARCH_AT91
 
-config NAND_S3C24X0
+config NAND_S3C24XX
 	bool
-	prompt "Samsung S3C24X0 NAND driver"
+	prompt "Samsung S3C24XX NAND driver"
 	depends on ARCH_S3C24xx
 	help
 	  Add support for processor's NAND device controller.
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 149cbbf..b973510 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -14,4 +14,4 @@ obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 obj-$(CONFIG_NAND_IMX)			+= nand_imx.o
 obj-$(CONFIG_NAND_OMAP_GPMC)		+= nand_omap_gpmc.o nand_omap_bch_decoder.o
 obj-$(CONFIG_NAND_ATMEL)		+= atmel_nand.o
-obj-$(CONFIG_NAND_S3C24X0)		+= nand_s3c2410.o
+obj-$(CONFIG_NAND_S3C24XX)		+= nand_s3c24xx.o
diff --git a/drivers/mtd/nand/nand_s3c2410.c b/drivers/mtd/nand/nand_s3c24xx.c
similarity index 99%
rename from drivers/mtd/nand/nand_s3c2410.c
rename to drivers/mtd/nand/nand_s3c24xx.c
index facdeee..c4fd13e 100644
--- a/drivers/mtd/nand/nand_s3c2410.c
+++ b/drivers/mtd/nand/nand_s3c24xx.c
@@ -32,7 +32,7 @@
 #include <linux/mtd/nand.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-iomap.h>
-#include <mach/s3c24x0-nand.h>
+#include <mach/s3c24xx-nand.h>
 #include <io.h>
 #include <asm-generic/errno.h>
 
@@ -486,7 +486,7 @@ static int s3c24x0_nand_probe(struct device_d *dev)
 	}
 
 	return add_mtd_device(mtd);
-	
+
 on_error:
 	free(host);
 	return ret;
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 05/14] MACH SAMSUNG/S3C: The SDHC driver can be shared in the S3C CPU family
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (3 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect driver's usage Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for Juergen Beisert
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/mini2440/mini2440.c                |    2 +-
 .../mach-samsung/include/mach/{mci.h => s3c-mci.h} |    0
 drivers/mci/s3c.c                                  |    2 +-
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/arm/mach-samsung/include/mach/{mci.h => s3c-mci.h} (100%)

diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index ad90852..b28d255 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -41,7 +41,7 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
-#include <mach/mci.h>
+#include <mach/s3c-mci.h>
 #include <mach/fb.h>
 
 static struct s3c24x0_nand_platform_data nand_info = {
diff --git a/arch/arm/mach-samsung/include/mach/mci.h b/arch/arm/mach-samsung/include/mach/s3c-mci.h
similarity index 100%
rename from arch/arm/mach-samsung/include/mach/mci.h
rename to arch/arm/mach-samsung/include/mach/s3c-mci.h
diff --git a/drivers/mci/s3c.c b/drivers/mci/s3c.c
index f4011d9..2a21ca6 100644
--- a/drivers/mci/s3c.c
+++ b/drivers/mci/s3c.c
@@ -40,7 +40,7 @@
 #include <errno.h>
 #include <clock.h>
 #include <io.h>
-#include <mach/mci.h>
+#include <mach/s3c-mci.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-iomap.h>
 
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (4 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 05/14] MACH SAMSUNG/S3C: The SDHC driver can be shared in the S3C CPU family Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management Juergen Beisert
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

This LCD driver is for the LCD controller in the S3C24xx family only. Change
its name to reflect its usage and free the way to add LCD controller drivers
for more recent Samsung CPUs.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/mini2440/mini2440.c                |    2 +-
 .../include/mach/{fb.h => s3c24xx-fb.h}            |    0
 drivers/video/Kconfig                              |    2 +-
 drivers/video/Makefile                             |    2 +-
 drivers/video/{s3c.c => s3c24xx.c}                 |    2 +-
 5 files changed, 4 insertions(+), 4 deletions(-)
 rename arch/arm/mach-samsung/include/mach/{fb.h => s3c24xx-fb.h} (100%)
 rename drivers/video/{s3c.c => s3c24xx.c} (99%)

diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index b28d255..df3bcc6 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -42,7 +42,7 @@
 #include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-mci.h>
-#include <mach/fb.h>
+#include <mach/s3c24xx-fb.h>
 
 static struct s3c24x0_nand_platform_data nand_info = {
 	.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
diff --git a/arch/arm/mach-samsung/include/mach/fb.h b/arch/arm/mach-samsung/include/mach/s3c24xx-fb.h
similarity index 100%
rename from arch/arm/mach-samsung/include/mach/fb.h
rename to arch/arm/mach-samsung/include/mach/s3c24xx-fb.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 28bcfed..65da473 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -27,7 +27,7 @@ config DRIVER_VIDEO_STM
 	  Say 'Y' here to enable framebuffer and splash screen support for
 	  i.MX23 and i.MX28 based systems.
 
-config DRIVER_VIDEO_S3C
+config DRIVER_VIDEO_S3C24XX
 	bool "S3C244x framebuffer driver"
 	depends on ARCH_S3C24xx
 	help
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 66b08d8..e0bab33 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -3,4 +3,4 @@ obj-$(CONFIG_VIDEO) += fb.o
 obj-$(CONFIG_DRIVER_VIDEO_STM) += stm.o
 obj-$(CONFIG_DRIVER_VIDEO_IMX) += imx.o
 obj-$(CONFIG_DRIVER_VIDEO_IMX_IPU) += imx-ipu-fb.o
-obj-$(CONFIG_DRIVER_VIDEO_S3C) += s3c.o
+obj-$(CONFIG_DRIVER_VIDEO_S3C24XX) += s3c24xx.o
diff --git a/drivers/video/s3c.c b/drivers/video/s3c24xx.c
similarity index 99%
rename from drivers/video/s3c.c
rename to drivers/video/s3c24xx.c
index b605c42..75677c3 100644
--- a/drivers/video/s3c.c
+++ b/drivers/video/s3c24xx.c
@@ -32,7 +32,7 @@
 #include <io.h>
 #include <mach/s3c-gpio.h>
 #include <mach/s3c-generic.h>
-#include <mach/fb.h>
+#include <mach/s3c24xx-fb.h>
 
 #define LCDCON1 0x00
 # define PNRMODE(x) (((x) & 3) << 5)
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (5 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family Juergen Beisert
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

There are major differences in the clock tree of the S3C24xx family and the
more recent CPUs of the S3C family. Keep the S3C24XX clock routines separate to
avoid a ifdef hell. But also use generic function names to be able to
share drivers among the S3C family.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile                   |    2 +-
 arch/arm/mach-samsung/generic.c                  |  117 +------------------
 arch/arm/mach-samsung/include/mach/s3c-clocks.h  |   31 +++++
 arch/arm/mach-samsung/include/mach/s3c-generic.h |   12 +-
 arch/arm/mach-samsung/include/mach/s3c-iomap.h   |   11 +--
 arch/arm/mach-samsung/lowlevel-init.S            |    2 +-
 arch/arm/mach-samsung/s3c24xx-clocks.c           |  137 ++++++++++++++++++++++
 drivers/mci/s3c.c                                |   10 +-
 drivers/serial/serial_s3c24x0.c                  |    2 +-
 drivers/video/s3c24xx.c                          |    4 +-
 10 files changed, 187 insertions(+), 141 deletions(-)
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c-clocks.h
 create mode 100644 arch/arm/mach-samsung/s3c24xx-clocks.c

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index f329cdb..c590180 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,3 +1,3 @@
 obj-y += generic.o
-obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o
+obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o
 obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 3c24b1a..3f6e801 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -28,100 +28,7 @@
 #include <clock.h>
 #include <io.h>
 #include <mach/s3c-iomap.h>
-
-/**
- * Calculate the current M-PLL clock.
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_mpllclk(void)
-{
-	uint32_t m, p, s, reg_val;
-
-	reg_val = readl(MPLLCON);
-	m = ((reg_val & 0xFF000) >> 12) + 8;
-	p = ((reg_val & 0x003F0) >> 4) + 2;
-	s = reg_val & 0x3;
-#ifdef CONFIG_CPU_S3C2410
-	return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
-#endif
-#ifdef CONFIG_CPU_S3C2440
-	return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s));
-#endif
-}
-
-/**
- * Calculate the current U-PLL clock
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_upllclk(void)
-{
-	uint32_t m, p, s, reg_val;
-
-	reg_val = readl(UPLLCON);
-	m = ((reg_val & 0xFF000) >> 12) + 8;
-	p = ((reg_val & 0x003F0) >> 4) + 2;
-	s = reg_val & 0x3;
-
-	return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
-}
-
-/**
- * Calculate the FCLK frequency used for the ARM CPU core
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_fclk(void)
-{
-	return s3c24xx_get_mpllclk();
-}
-
-/**
- * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral)
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_hclk(void)
-{
-	uint32_t f_clk;
-
-	f_clk = s3c24xx_get_fclk();
-#ifdef CONFIG_CPU_S3C2410
-	if (readl(CLKDIVN) & 0x02)
-		return f_clk >> 1;
-#endif
-#ifdef CONFIG_CPU_S3C2440
-	switch(readl(CLKDIVN) & 0x06) {
-	case 2:
-		return f_clk >> 1;
-	case 4:
-		return f_clk >> 2;	/* TODO consider CAMDIVN */
-	case 6:
-		return f_clk / 3;	/* TODO consider CAMDIVN */
-	}
-#endif
-	return f_clk;
-}
-
-/**
- * Calculate the PCLK frequency used for the slower peripherals
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_pclk(void)
-{
-	uint32_t p_clk;
-
-	p_clk = s3c24xx_get_hclk();
-	if (readl(CLKDIVN) & 0x01)
-		return p_clk >> 1;
-	return p_clk;
-}
-
-/**
- * Calculate the UCLK frequency used by the USB host device
- * @return Current frequency in Hz
- */
-uint32_t s3c24xx_get_uclk(void)
-{
-    return s3c24xx_get_upllclk();
-}
+#include <mach/s3c-generic.h>
 
 /**
  * Calculate the amount of connected and available memory
@@ -169,26 +76,6 @@ uint32_t s3c24x0_get_memory_size(void)
 	return size;
 }
 
-/**
- * Show the user the current clock settings
- */
-int s3c24xx_dump_clocks(void)
-{
-	printf("refclk:  %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000);
-	printf("mpll:    %7d kHz\n", s3c24xx_get_mpllclk() / 1000);
-	printf("upll:    %7d kHz\n", s3c24xx_get_upllclk() / 1000);
-	printf("fclk:    %7d kHz\n", s3c24xx_get_fclk() / 1000);
-	printf("hclk:    %7d kHz\n", s3c24xx_get_hclk() / 1000);
-	printf("pclk:    %7d kHz\n", s3c24xx_get_pclk() / 1000);
-	printf("SDRAM1:   CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c24xx_get_hclk() / 1000000);
-	if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
-		printf("SDRAM2:   CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2,
-			s3c24xx_get_hclk() / 1000000);
-	return 0;
-}
-
-late_initcall(s3c24xx_dump_clocks);
-
 static uint64_t s3c24xx_clocksource_read(void)
 {
 	/* note: its a down counter */
@@ -203,7 +90,7 @@ static struct clocksource cs = {
 
 static int clocksource_init (void)
 {
-	uint32_t p_clk = s3c24xx_get_pclk();
+	uint32_t p_clk = s3c_get_pclk();
 
 	writel(0x00000000, TCON);	/* stop all timers */
 	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-clocks.h b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
new file mode 100644
index 0000000..44b2a6c
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_S3C_CLOCKS_H
+# define __MACH_S3C_CLOCKS_H
+
+#ifdef CONFIG_ARCH_S3C24xx
+# define S3C_LOCKTIME (S3C_CLOCK_POWER_BASE)
+# define S3C_MPLLCON (S3C_CLOCK_POWER_BASE + 0x4)
+# define S3C_UPLLCON (S3C_CLOCK_POWER_BASE + 0x8)
+# define S3C_CLKCON (S3C_CLOCK_POWER_BASE + 0xc)
+# define S3C_CLKSLOW (S3C_CLOCK_POWER_BASE + 0x10)
+# define S3C_CLKDIVN (S3C_CLOCK_POWER_BASE + 0x14)
+
+# define S3C_MPLLCON_GET_MDIV(x) ((((x) >> 12) & 0xff) + 8)
+# define S3C_MPLLCON_GET_PDIV(x) ((((x) >> 4) & 0x3f) + 2)
+# define S3C_MPLLCON_GET_SDIV(x) ((x) & 0x3)
+#endif
+
+#endif /* __MACH_S3C_CLOCKS_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index b8abcf1..33f025d 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -24,10 +24,10 @@
  * MA 02111-1307 USA
  */
 
-uint32_t s3c24xx_get_mpllclk(void);
-uint32_t s3c24xx_get_upllclk(void);
-uint32_t s3c24xx_get_fclk(void);
-uint32_t s3c24xx_get_hclk(void);
-uint32_t s3c24xx_get_pclk(void);
-uint32_t s3c24xx_get_uclk(void);
+uint32_t s3c_get_mpllclk(void);
+uint32_t s3c_get_upllclk(void);
+uint32_t s3c_get_fclk(void);
+uint32_t s3c_get_hclk(void);
+uint32_t s3c_get_pclk(void);
+uint32_t s3c_get_uclk(void);
 uint32_t s3c24x0_get_memory_size(void);
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index a990d80..7cedf6a 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -25,7 +25,7 @@
 #define S3C2410_USB_HOST_BASE		0x49000000
 #define S3C2410_INTERRUPT_BASE		0x4A000000
 #define S3C2410_DMA_BASE		0x4B000000
-#define S3C24X0_CLOCK_POWER_BASE	0x4C000000
+#define S3C_CLOCK_POWER_BASE		0x4C000000
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
 #define S3C24X0_UART_BASE		0x50000000
@@ -40,15 +40,6 @@
 #define S3C2410_SPI_BASE		0x59000000
 #define S3C2410_SDI_BASE		0x5A000000
 
-/* Clock control (direct access) */
-
-#define LOCKTIME (S3C24X0_CLOCK_POWER_BASE)
-#define MPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x4)
-#define UPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x8)
-#define CLKCON (S3C24X0_CLOCK_POWER_BASE + 0xc)
-#define CLKSLOW (S3C24X0_CLOCK_POWER_BASE + 0x10)
-#define CLKDIVN (S3C24X0_CLOCK_POWER_BASE + 0x14)
-
 /* Timer (direct access) */
 #define TCFG0 (S3C24X0_TIMER_BASE + 0x00)
 #define TCFG1 (S3C24X0_TIMER_BASE + 0x04)
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
index 8529283..e2e3fc0 100644
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ b/arch/arm/mach-samsung/lowlevel-init.S
@@ -77,7 +77,7 @@ routine very early in your board_init_lowlevel routine.
 .globl s3c24x0_pll_init
 s3c24x0_pll_init:
 
-	mov r0, #S3C24X0_CLOCK_POWER_BASE
+	mov r0, #S3C_CLOCK_POWER_BASE
 
 	/* configure internal clock ratio */
 	mov r1, #BOARD_SPECIFIC_CLKDIVN
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
new file mode 100644
index 0000000..beacc76
--- /dev/null
+++ b/arch/arm/mach-samsung/s3c24xx-clocks.c
@@ -0,0 +1,137 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-clocks.h>
+
+/**
+ * Calculate the current M-PLL clock.
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_mpllclk(void)
+{
+	uint32_t m, p, s, reg_val;
+
+	reg_val = readl(S3C_MPLLCON);
+	m = ((reg_val & 0xFF000) >> 12) + 8;
+	p = ((reg_val & 0x003F0) >> 4) + 2;
+	s = reg_val & 0x3;
+#ifdef CONFIG_CPU_S3C2410
+	return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
+#endif
+#ifdef CONFIG_CPU_S3C2440
+	return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s));
+#endif
+}
+
+/**
+ * Calculate the current U-PLL clock
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_upllclk(void)
+{
+	uint32_t m, p, s, reg_val;
+
+	reg_val = readl(S3C_UPLLCON);
+	m = ((reg_val & 0xFF000) >> 12) + 8;
+	p = ((reg_val & 0x003F0) >> 4) + 2;
+	s = reg_val & 0x3;
+
+	return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
+}
+
+/**
+ * Calculate the FCLK frequency used for the ARM CPU core
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_fclk(void)
+{
+	return s3c_get_mpllclk();
+}
+
+/**
+ * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral)
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_hclk(void)
+{
+	uint32_t f_clk;
+
+	f_clk = s3c_get_fclk();
+#ifdef CONFIG_CPU_S3C2410
+	if (readl(S3C_CLKDIVN) & 0x02)
+		return f_clk >> 1;
+#endif
+#ifdef CONFIG_CPU_S3C2440
+	switch(readl(S3C_CLKDIVN) & 0x06) {
+	case 2:
+		return f_clk >> 1;
+	case 4:
+		return f_clk >> 2;	/* TODO consider CAMDIVN */
+	case 6:
+		return f_clk / 3;	/* TODO consider CAMDIVN */
+	}
+#endif
+	return f_clk;
+}
+
+/**
+ * Calculate the PCLK frequency used for the slower peripherals
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_pclk(void)
+{
+	uint32_t p_clk;
+
+	p_clk = s3c_get_hclk();
+	if (readl(S3C_CLKDIVN) & 0x01)
+		return p_clk >> 1;
+	return p_clk;
+}
+
+/**
+ * Calculate the UCLK frequency used by the USB host device
+ * @return Current frequency in Hz
+ */
+uint32_t s3c24_get_uclk(void)
+{
+	return s3c_get_upllclk();
+}
+
+/**
+ * Show the user the current clock settings
+ */
+int s3c24xx_dump_clocks(void)
+{
+	printf("refclk:  %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000);
+	printf("mpll:    %7d kHz\n", s3c_get_mpllclk() / 1000);
+	printf("upll:    %7d kHz\n", s3c_get_upllclk() / 1000);
+	printf("fclk:    %7d kHz\n", s3c_get_fclk() / 1000);
+	printf("hclk:    %7d kHz\n", s3c_get_hclk() / 1000);
+	printf("pclk:    %7d kHz\n", s3c_get_pclk() / 1000);
+	printf("SDRAM1:   CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000);
+	if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+		printf("SDRAM2:   CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2,
+			s3c_get_hclk() / 1000000);
+	return 0;
+}
+
+late_initcall(s3c24xx_dump_clocks);
diff --git a/drivers/mci/s3c.c b/drivers/mci/s3c.c
index 2a21ca6..ccc8be4 100644
--- a/drivers/mci/s3c.c
+++ b/drivers/mci/s3c.c
@@ -217,7 +217,7 @@ static unsigned s3c_setup_clock_speed(struct device_d *hw_dev, unsigned nc)
 	if (nc == 0)
 		return 0;
 
-	clock = s3c24xx_get_pclk();
+	clock = s3c_get_pclk();
 	/* Calculate the required prescaler value to get the requested frequency */
 	mci_psc = (clock + (nc >> 2)) / nc;
 
@@ -786,8 +786,8 @@ static int s3c_mci_probe(struct device_d *hw_dev)
 	struct s3c_mci_platform_data *pd = hw_dev->platform_data;
 
 	/* TODO replace by the global func: enable the SDI unit clock */
-	writel(readl(S3C24X0_CLOCK_POWER_BASE + 0x0c) | 0x200,
-		S3C24X0_CLOCK_POWER_BASE + 0x0c);
+	writel(readl(S3C_CLOCK_POWER_BASE + 0x0c) | 0x200,
+		S3C_CLOCK_POWER_BASE + 0x0c);
 
 	if (pd == NULL) {
 		pr_err("Missing platform data\n");
@@ -801,8 +801,8 @@ static int s3c_mci_probe(struct device_d *hw_dev)
 	/* feed forward the platform specific values */
 	mci_pdata.voltages = pd->voltages;
 	mci_pdata.host_caps = pd->caps;
-	mci_pdata.f_min = pd->f_min == 0 ? s3c24xx_get_pclk() / 256 : pd->f_min;
-	mci_pdata.f_max = pd->f_max == 0 ? s3c24xx_get_pclk() / 2 : pd->f_max;
+	mci_pdata.f_min = pd->f_min == 0 ? s3c_get_pclk() / 256 : pd->f_min;
+	mci_pdata.f_max = pd->f_max == 0 ? s3c_get_pclk() / 2 : pd->f_max;
 
 	/*
 	 * Start the clock to let the engine and the card finishes its startup
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 8e6bb0c..0ca2319 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -48,7 +48,7 @@ static int s3c24x0_serial_setbaudrate(struct console_device *cdev, int baudrate)
 	unsigned val;
 
 	/* value is calculated so : PCLK / (16 * baudrate) -1 */
-	val = s3c24xx_get_pclk() / (16 * baudrate) - 1;
+	val = s3c_get_pclk() / (16 * baudrate) - 1;
 	writew(val, base + UBRDIV);
 
 	return 0;
diff --git a/drivers/video/s3c24xx.c b/drivers/video/s3c24xx.c
index 75677c3..f6af773 100644
--- a/drivers/video/s3c24xx.c
+++ b/drivers/video/s3c24xx.c
@@ -227,7 +227,7 @@ static int s3cfb_activate_var(struct fb_info *fb_info)
 	/* ensure video output is _off_ */
 	writel(0x00000000, fbi->base + LCDCON1);
 
-	hclk = s3c24xx_get_hclk() / 1000U;	/* hclk in kHz */
+	hclk = s3c_get_hclk() / 1000U;	/* hclk in kHz */
 	div = hclk / PICOS2KHZ(mode->pixclock);
 	if (div < 3)
 		div  = 3;
@@ -339,7 +339,7 @@ static void s3cfb_info(struct device_d *hw_dev)
 	addr3 = readl(fbi->base + LCDSADDR3);
 
 	printf(" Video hardware info:\n");
-	printf("  Video clock is running at %u Hz\n", s3c24xx_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2));
+	printf("  Video clock is running at %u Hz\n", s3c_get_hclk() / ((GET_CLKVAL(con1) + 1) * 2));
 	printf("  Video memory bank starts at 0x%08X\n", GET_LCDBANK(addr1) << 22);
 	printf("  Video memory bank offset: 0x%08X\n", GET_LCDBASEU(addr1));
 	printf("  Video memory end: 0x%08X\n", GET_LCDBASEU(addr2));
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (6 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

This patch just move the clocksource functions out of the generic.c source file
to handle it on a per CPU base later on.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile    |    2 +-
 arch/arm/mach-samsung/generic.c   |   33 ----------------------
 arch/arm/mach-samsung/s3c-timer.c |   55 +++++++++++++++++++++++++++++++++++++
 3 files changed, 56 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/mach-samsung/s3c-timer.c

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index c590180..2ba5c3f 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,3 +1,3 @@
-obj-y += generic.o
+obj-y += s3c-timer.o generic.o
 obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o
 obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 3f6e801..83222e1 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -76,39 +76,6 @@ uint32_t s3c24x0_get_memory_size(void)
 	return size;
 }
 
-static uint64_t s3c24xx_clocksource_read(void)
-{
-	/* note: its a down counter */
-	return 0xFFFF - readw(TCNTO4);
-}
-
-static struct clocksource cs = {
-	.read	= s3c24xx_clocksource_read,
-	.mask	= CLOCKSOURCE_MASK(16),
-	.shift	= 10,
-};
-
-static int clocksource_init (void)
-{
-	uint32_t p_clk = s3c_get_pclk();
-
-	writel(0x00000000, TCON);	/* stop all timers */
-	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
-	writel(0x00030000, TCFG1);	/* /16 */
-
-	writew(0xffff, TCNTB4);		/* reload value is TOP */
-
-	writel(0x00600000, TCON);	/* force a first reload */
-	writel(0x00400000, TCON);
-	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
-
-	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
-	init_clock(&cs);
-
-	return 0;
-}
-core_initcall(clocksource_init);
-
 void __noreturn reset_cpu(unsigned long addr)
 {
 	/* Disable watchdog */
diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
new file mode 100644
index 0000000..2b0b38a
--- /dev/null
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -0,0 +1,55 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+
+static uint64_t s3c24xx_clocksource_read(void)
+{
+	/* note: its a down counter */
+	return 0xFFFF - readw(TCNTO4);
+}
+
+static struct clocksource cs = {
+	.read	= s3c24xx_clocksource_read,
+	.mask	= CLOCKSOURCE_MASK(16),
+	.shift	= 10,
+};
+
+static int clocksource_init(void)
+{
+	uint32_t p_clk = s3c_get_pclk();
+
+	writel(0x00000000, TCON);	/* stop all timers */
+	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
+	writel(0x00030000, TCFG1);	/* /16 */
+
+	writew(0xffff, TCNTB4);		/* reload value is TOP */
+
+	writel(0x00600000, TCON);	/* force a first reload */
+	writel(0x00400000, TCON);
+	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
+
+	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
+	init_clock(&cs);
+
+	return 0;
+}
+core_initcall(clocksource_init);
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (7 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-28  8:11   ` Sascha Hauer
  2011-11-26 20:22 ` [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver Juergen Beisert
                   ` (4 subsequent siblings)
  13 siblings, 1 reply; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

Most members of the S3Cxxxx family share similar timer units. But they are
not really register compatible. To reflect this, use a separate name space for
the S3C family.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/include/mach/s3c-iomap.h |   20 +------------
 arch/arm/mach-samsung/include/mach/s3c-timer.h |   36 ++++++++++++++++++++++++
 arch/arm/mach-samsung/s3c-timer.c              |   17 ++++++-----
 3 files changed, 46 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c-timer.h

diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 7cedf6a..807660a 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -29,7 +29,7 @@
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
 #define S3C24X0_UART_BASE		0x50000000
-#define S3C24X0_TIMER_BASE		0x51000000
+#define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
 #define S3C24X0_WATCHDOG_BASE		0x53000000
 #define S3C2410_I2C_BASE		0x54000000
@@ -40,24 +40,6 @@
 #define S3C2410_SPI_BASE		0x59000000
 #define S3C2410_SDI_BASE		0x5A000000
 
-/* Timer (direct access) */
-#define TCFG0 (S3C24X0_TIMER_BASE + 0x00)
-#define TCFG1 (S3C24X0_TIMER_BASE + 0x04)
-#define TCON (S3C24X0_TIMER_BASE + 0x08)
-#define TCNTB0 (S3C24X0_TIMER_BASE + 0x0c)
-#define TCMPB0 (S3C24X0_TIMER_BASE + 0x10)
-#define TCNTO0 (S3C24X0_TIMER_BASE + 0x14)
-#define TCNTB1 (S3C24X0_TIMER_BASE + 0x18)
-#define TCMPB1 (S3C24X0_TIMER_BASE + 0x1c)
-#define TCNTO1 (S3C24X0_TIMER_BASE + 0x20)
-#define TCNTB2 (S3C24X0_TIMER_BASE + 0x24)
-#define TCMPB2 (S3C24X0_TIMER_BASE + 0x28)
-#define TCNTO2 (S3C24X0_TIMER_BASE + 0x2c)
-#define TCNTB3 (S3C24X0_TIMER_BASE + 0x30)
-#define TCMPB3 (S3C24X0_TIMER_BASE + 0x34)
-#define TCNTO3 (S3C24X0_TIMER_BASE + 0x38)
-#define TCNTB4 (S3C24X0_TIMER_BASE + 0x3c)
-#define TCNTO4 (S3C24X0_TIMER_BASE + 0x40)
 
 /* Watchdog (direct access) */
 #define WTCON (S3C24X0_WATCHDOG_BASE)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-timer.h b/arch/arm/mach-samsung/include/mach/s3c-timer.h
new file mode 100644
index 0000000..5201fc4
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c-timer.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_S3C_TIMER_H
+# define __MACH_S3C_TIMER_H
+
+#define S3C_TCFG0 (S3C_TIMER_BASE + 0x00)
+#define S3C_TCFG1 (S3C_TIMER_BASE + 0x04)
+#define S3C_TCON (S3C_TIMER_BASE + 0x08)
+#define S3C_TCNTB0 (S3C_TIMER_BASE + 0x0c)
+#define S3C_TCMPB0 (S3C_TIMER_BASE + 0x10)
+#define S3C_TCNTO0 (S3C_TIMER_BASE + 0x14)
+#define S3C_TCNTB1 (S3C_TIMER_BASE + 0x18)
+#define S3C_TCMPB1 (S3C_TIMER_BASE + 0x1c)
+#define S3C_TCNTO1 (S3C_TIMER_BASE + 0x20)
+#define S3C_TCNTB2 (S3C_TIMER_BASE + 0x24)
+#define S3C_TCMPB2 (S3C_TIMER_BASE + 0x28)
+#define S3C_TCNTO2 (S3C_TIMER_BASE + 0x2c)
+#define S3C_TCNTB3 (S3C_TIMER_BASE + 0x30)
+#define S3C_TCMPB3 (S3C_TIMER_BASE + 0x34)
+#define S3C_TCNTO3 (S3C_TIMER_BASE + 0x38)
+#define S3C_TCNTB4 (S3C_TIMER_BASE + 0x3c)
+#define S3C_TCNTO4 (S3C_TIMER_BASE + 0x40)
+
+#endif /* __MACH_S3C_TIMER_H */
diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
index 2b0b38a..a3ce4a2 100644
--- a/arch/arm/mach-samsung/s3c-timer.c
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -20,11 +20,12 @@
 #include <io.h>
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
+#include <mach/s3c-timer.h>
 
 static uint64_t s3c24xx_clocksource_read(void)
 {
 	/* note: its a down counter */
-	return 0xFFFF - readw(TCNTO4);
+	return 0xFFFF - readw(S3C_TCNTO4);
 }
 
 static struct clocksource cs = {
@@ -37,15 +38,15 @@ static int clocksource_init(void)
 {
 	uint32_t p_clk = s3c_get_pclk();
 
-	writel(0x00000000, TCON);	/* stop all timers */
-	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
-	writel(0x00030000, TCFG1);	/* /16 */
+	writel(0x00000000, S3C_TCON);	/* stop all timers */
+	writel(0x00ffffff, S3C_TCFG0);	/* PCLK / (255 + 1) for timer 4 */
+	writel(0x00030000, S3C_TCFG1);	/* /16 */
 
-	writew(0xffff, TCNTB4);		/* reload value is TOP */
+	writew(0xffff, S3C_TCNTB4);	/* reload value is TOP */
 
-	writel(0x00600000, TCON);	/* force a first reload */
-	writel(0x00400000, TCON);
-	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
+	writel(0x00600000, S3C_TCON);	/* force a first reload */
+	writel(0x00400000, S3C_TCON);
+	writel(0x00500000, S3C_TCON);	/* enable timer 4 with auto reload */
 
 	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
 	init_clock(&cs);
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (8 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family Juergen Beisert
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

After separation and after all S3C macros are now present, change the driver
to be more generic for future additions. This includes the clock sources of
the timers, that will be now in the CPU part (it cannot be generic due to
differences in the clock tree).

The timer registers in the S3C24XX family are only 16 bit wide. But these
registers can be read and written in a 32 bit manner.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/include/mach/s3c-generic.h |    3 +
 arch/arm/mach-samsung/include/mach/s3c-timer.h   |   10 ++++
 arch/arm/mach-samsung/s3c-timer.c                |   54 ++++++++++++++-------
 arch/arm/mach-samsung/s3c24xx-clocks.c           |   24 ++++++++++
 4 files changed, 73 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 33f025d..0909c0e 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -30,4 +30,7 @@ uint32_t s3c_get_fclk(void);
 uint32_t s3c_get_hclk(void);
 uint32_t s3c_get_pclk(void);
 uint32_t s3c_get_uclk(void);
+void s3c_init_t4_clk_source(void);
+unsigned s3c_get_t4_clk(void);
 uint32_t s3c24x0_get_memory_size(void);
+
diff --git a/arch/arm/mach-samsung/include/mach/s3c-timer.h b/arch/arm/mach-samsung/include/mach/s3c-timer.h
index 5201fc4..f122b09 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-timer.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-timer.h
@@ -16,8 +16,18 @@
 # define __MACH_S3C_TIMER_H
 
 #define S3C_TCFG0 (S3C_TIMER_BASE + 0x00)
+# define S3C_TCFG0_T4MASK 0xff00
+# define S3C_TCFG0_SET_PSCL234(x) ((x) << 8)
+# define S3C_TCFG0_GET_PSCL234(x) (((x) >> 8) & 0xff)
 #define S3C_TCFG1 (S3C_TIMER_BASE + 0x04)
+# define S3C_TCFG1_T4MASK 0xf0000
+# define S3C_TCFG1_SET_T4MUX(x) ((x) << 16)
+# define S3C_TCFG1_GET_T4MUX(x) (((x) >> 16) & 0xf)
 #define S3C_TCON (S3C_TIMER_BASE + 0x08)
+# define S3C_TCON_T4MASK (7 << 20)
+# define S3C_TCON_T4START (1 << 20)
+# define S3C_TCON_T4MANUALUPD (1 << 21)
+# define S3C_TCON_T4RELOAD (1 <<22)
 #define S3C_TCNTB0 (S3C_TIMER_BASE + 0x0c)
 #define S3C_TCMPB0 (S3C_TIMER_BASE + 0x10)
 #define S3C_TCNTO0 (S3C_TIMER_BASE + 0x14)
diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
index a3ce4a2..a29c8d6 100644
--- a/arch/arm/mach-samsung/s3c-timer.c
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -22,35 +22,53 @@
 #include <mach/s3c-generic.h>
 #include <mach/s3c-timer.h>
 
-static uint64_t s3c24xx_clocksource_read(void)
+#define TIMER_WIDTH 16
+#define TIMER_SHIFT 10
+static const uint32_t max = 0x0000ffff;
+
+static void s3c_timer_init(void)
+{
+	unsigned tcon;
+
+	tcon = readl(S3C_TCON) & ~S3C_TCON_T4MASK;
+
+	writel(max, S3C_TCNTB4);	/* reload value */
+	/* force a manual counter update */
+	writel(tcon | S3C_TCON_T4MANUALUPD, S3C_TCON);
+}
+
+static void s3c_timer_start(void)
+{
+	unsigned tcon;
+
+	tcon  = readl(S3C_TCON) & ~S3C_TCON_T4MANUALUPD;
+	tcon |= S3C_TCON_T4START | S3C_TCON_T4RELOAD;
+	writel(tcon, S3C_TCON);
+}
+
+static uint64_t s3c_clocksource_read(void)
 {
 	/* note: its a down counter */
-	return 0xFFFF - readw(S3C_TCNTO4);
+	return max - readl(S3C_TCNTO4);
 }
 
 static struct clocksource cs = {
-	.read	= s3c24xx_clocksource_read,
-	.mask	= CLOCKSOURCE_MASK(16),
-	.shift	= 10,
+	.read = s3c_clocksource_read,
+	.mask = CLOCKSOURCE_MASK(TIMER_WIDTH),
+	.shift = TIMER_SHIFT,
 };
 
-static int clocksource_init(void)
+static int s3c_clk_src_init(void)
 {
-	uint32_t p_clk = s3c_get_pclk();
-
-	writel(0x00000000, S3C_TCON);	/* stop all timers */
-	writel(0x00ffffff, S3C_TCFG0);	/* PCLK / (255 + 1) for timer 4 */
-	writel(0x00030000, S3C_TCFG1);	/* /16 */
-
-	writew(0xffff, S3C_TCNTB4);	/* reload value is TOP */
+	/* select its clock source first */
+	s3c_init_t4_clk_source();
 
-	writel(0x00600000, S3C_TCON);	/* force a first reload */
-	writel(0x00400000, S3C_TCON);
-	writel(0x00500000, S3C_TCON);	/* enable timer 4 with auto reload */
+	s3c_timer_init();
+	s3c_timer_start();
 
-	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
+	cs.mult = clocksource_hz2mult(s3c_get_t4_clk(), cs.shift);
 	init_clock(&cs);
 
 	return 0;
 }
-core_initcall(clocksource_init);
+core_initcall(s3c_clk_src_init);
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
index beacc76..3a230b2 100644
--- a/arch/arm/mach-samsung/s3c24xx-clocks.c
+++ b/arch/arm/mach-samsung/s3c24xx-clocks.c
@@ -21,6 +21,7 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-clocks.h>
+#include <mach/s3c-timer.h>
 
 /**
  * Calculate the current M-PLL clock.
@@ -116,6 +117,29 @@ uint32_t s3c24_get_uclk(void)
 	return s3c_get_upllclk();
 }
 
+void s3c_init_t4_clk_source(void)
+{
+	unsigned reg;
+
+	reg = readl(S3C_TCON) & ~S3C_TCON_T4MASK; /* stop timer 4 */
+	writel(reg, S3C_TCON);
+	reg = readl(S3C_TCFG0) & ~S3C_TCFG0_T4MASK;
+	reg |= S3C_TCFG0_SET_PSCL234(0); /* 0 means pre scaler is '256' */
+	writel(reg, S3C_TCFG0);
+	reg = readl(S3C_TCFG1) & ~S3C_TCFG1_T4MASK;
+	reg |= S3C_TCFG1_SET_T4MUX(3); /* / 16 */
+	writel(reg, S3C_TCFG1);
+}
+
+unsigned s3c_get_t4_clk(void)
+{
+	unsigned clk = s3c_get_pclk();
+	unsigned pre = S3C_TCFG0_GET_PSCL234(readl(S3C_TCFG0)) + 1;
+	unsigned div = S3C_TCFG1_GET_T4MUX(readl(S3C_TCFG1)) + 1;
+
+	return clk / pre / (1 << div);
+}
+
 /**
  * Show the user the current clock settings
  */
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (9 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:22 ` [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs Juergen Beisert
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/generic.c                |   10 +++++++---
 arch/arm/mach-samsung/include/mach/s3c-iomap.h |    7 +------
 arch/arm/mach-samsung/lowlevel-init.S          |    2 +-
 3 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 83222e1..4a0c87b 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -76,16 +76,20 @@ uint32_t s3c24x0_get_memory_size(void)
 	return size;
 }
 
+#define S3C_WTCON (S3C_WATCHDOG_BASE)
+#define S3C_WTDAT (S3C_WATCHDOG_BASE + 0x04)
+#define S3C_WTCNT (S3C_WATCHDOG_BASE + 0x08)
+
 void __noreturn reset_cpu(unsigned long addr)
 {
 	/* Disable watchdog */
-	writew(0x0000, WTCON);
+	writew(0x0000, S3C_WTCON);
 
 	/* Initialize watchdog timer count register */
-	writew(0x0001, WTCNT);
+	writew(0x0001, S3C_WTCNT);
 
 	/* Enable watchdog timer; assert reset at timer timeout */
-	writew(0x0021, WTCON);
+	writew(0x0021, S3C_WTCON);
 
 	/* loop forever and wait for reset to happen */
 	while(1)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 807660a..9677803 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -31,7 +31,7 @@
 #define S3C24X0_UART_BASE		0x50000000
 #define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
-#define S3C24X0_WATCHDOG_BASE		0x53000000
+#define S3C_WATCHDOG_BASE		0x53000000
 #define S3C2410_I2C_BASE		0x54000000
 #define S3C2410_I2S_BASE		0x55000000
 #define S3C24X0_GPIO_BASE		0x56000000
@@ -41,11 +41,6 @@
 #define S3C2410_SDI_BASE		0x5A000000
 
 
-/* Watchdog (direct access) */
-#define WTCON (S3C24X0_WATCHDOG_BASE)
-#define WTDAT (S3C24X0_WATCHDOG_BASE + 0x04)
-#define WTCNT (S3C24X0_WATCHDOG_BASE + 0x08)
-
 /*
  * if we are booting from NAND, its internal SRAM occures at
  * a different address than without this feature
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
index e2e3fc0..93ea3ce 100644
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ b/arch/arm/mach-samsung/lowlevel-init.S
@@ -29,7 +29,7 @@
 .globl s3c24x0_disable_wd
 s3c24x0_disable_wd:
 
-	ldr r0, =S3C24X0_WATCHDOG_BASE
+	ldr r0, =S3C_WATCHDOG_BASE
 	mov r1, #0x0
 	str r1, [r0]
 	mov pc, lr
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (10 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family Juergen Beisert
@ 2011-11-26 20:22 ` Juergen Beisert
  2011-11-26 20:23 ` [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling Juergen Beisert
  2011-11-26 20:23 ` [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs Juergen Beisert
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:22 UTC (permalink / raw)
  To: barebox

The UART is one of the units which differs only slightly inside the S3C family.
Prepare this driver to share it with more recent CPUs.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                 |    2 +-
 arch/arm/boards/a9m2440/a9m2440.c                 |    2 +-
 arch/arm/boards/mini2440/mini2440.c               |    2 +-
 arch/arm/mach-samsung/include/mach/s3c-iomap.h    |   15 ++---
 drivers/serial/Kconfig                            |   10 ++--
 drivers/serial/Makefile                           |    2 +-
 drivers/serial/{serial_s3c24x0.c => serial_s3c.c} |   68 +++++++++++++--------
 7 files changed, 58 insertions(+), 43 deletions(-)
 rename drivers/serial/{serial_s3c24x0.c => serial_s3c.c} (68%)

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index 989dcf7..a66afb9 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -167,7 +167,7 @@ void __bare_init nand_boot(void)
 
 static int a9m2410_console_init(void)
 {
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 1986efb..077d726 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -168,7 +168,7 @@ void __bare_init nand_boot(void)
 
 static int a9m2440_console_init(void)
 {
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index df3bcc6..9270c18 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -342,7 +342,7 @@ static int mini2440_console_init(void)
 	s3c_gpio_mode(GPH2_TXD0);
 	s3c_gpio_mode(GPH3_RXD0);
 
-	add_generic_device("s3c24x0_serial", -1, NULL, UART1_BASE, UART1_SIZE,
+	add_generic_device("s3c_serial", -1, NULL, S3C_UART1_BASE, S3C_UART1_SIZE,
 			   IORESOURCE_MEM, NULL);
 	return 0;
 }
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 9677803..7c45c53 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -28,7 +28,7 @@
 #define S3C_CLOCK_POWER_BASE		0x4C000000
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
-#define S3C24X0_UART_BASE		0x50000000
+#define S3C_UART_BASE			0x50000000
 #define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
 #define S3C_WATCHDOG_BASE		0x53000000
@@ -52,13 +52,12 @@
 #endif
 #define NFC_RAM_SIZE 4096
 
-/* internal UARTs (driver based) */
-#define UART1_BASE (S3C24X0_UART_BASE)
-#define UART1_SIZE 0x4000
-#define UART2_BASE (S3C24X0_UART_BASE + 0x4000)
-#define UART2_SIZE 0x4000
-#define UART3_BASE (S3C24X0_UART_BASE + 0x8000)
-#define UART3_SIZE 0x4000
+#define S3C_UART1_BASE (S3C_UART_BASE)
+#define S3C_UART1_SIZE 0x4000
+#define S3C_UART2_BASE (S3C_UART_BASE + 0x4000)
+#define S3C_UART2_SIZE 0x4000
+#define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
+#define S3C_UART3_SIZE 0x4000
 
 /* CS configuration (direct access) */
 #define BWSCON (S3C24X0_MEMCTL_BASE)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c2bee79..a986793 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -78,16 +78,16 @@ config DRIVER_SERIAL_PL010
 	help
 	  Enable this to get support for AMBA PL010 based serial devices
 
-config DRIVER_SERIAL_S3C24X0
-	bool "Samsung S3C24X0 serial driver"
+config DRIVER_SERIAL_S3C
+	bool "Samsung S3C serial driver"
 	depends on ARCH_S3C24xx
 	default y
 	help
-	  Say Y here if you want to use the CONS on a S3C24X0 CPU
+	  Say Y here if you want to use the CONS on a Samsung S3C CPU
 
-config DRIVER_SERIAL_S3C24X0_AUTOSYNC
+config DRIVER_SERIAL_S3C_AUTOSYNC
 	bool "Enable auto flow"
-	depends on DRIVER_SERIAL_S3C24X0
+	depends on DRIVER_SERIAL_S3C
 	help
 	  Say Y here if you want to use the auto flow feature of this
 	  UART. RTS and CTS will be handled by the hardware when enabled.
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 411b8c5..1d1cff7 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -15,6 +15,6 @@ obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX)		+= serial_mpc5xxx.o
 obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN)		+= serial_blackfin.o
 obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
 obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
-obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)		+= serial_s3c24x0.o
+obj-$(CONFIG_DRIVER_SERIAL_S3C)			+= serial_s3c.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA)		+= serial_altera.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)		+= serial_altera_jtag.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c.c
similarity index 68%
rename from drivers/serial/serial_s3c24x0.c
rename to drivers/serial/serial_s3c.c
index 0ca2319..7b31f67 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c.c
@@ -1,5 +1,5 @@
 /*
- * (c) 2009 Juergen Beisert <j.beisert@saschahauer.de>
+ * (c) 2009...2011 Juergen Beisert <j.beisert@pengutronix.de>
  *
  * Based on code from:
  * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
@@ -41,20 +41,36 @@
 #define URXH 0x24		/* receive */
 #define UBRDIV 0x28		/* baudrate generator */
 
-static int s3c24x0_serial_setbaudrate(struct console_device *cdev, int baudrate)
+static unsigned s3c_get_arch_uart_input_clock(void __iomem *base)
+{
+	unsigned reg = readw(base + UCON);
+
+	switch (reg & 0xc00) {
+		case 0x000:
+		case 0x800:
+			return s3c_get_pclk();
+		case 0x400:
+			break;	/* TODO UEXTCLK */
+		case 0xc00:
+			break;	/* TODO FCLK/n */
+	}
+
+	return 0;	/* not nice, but we can't emit an error message! */
+}
+
+static int s3c_serial_setbaudrate(struct console_device *cdev, int baudrate)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
 	unsigned val;
 
-	/* value is calculated so : PCLK / (16 * baudrate) -1 */
-	val = s3c_get_pclk() / (16 * baudrate) - 1;
+	val = s3c_get_arch_uart_input_clock(base) / (16 * baudrate) - 1;
 	writew(val, base + UBRDIV);
 
 	return 0;
 }
 
-static int s3c24x0_serial_init_port(struct console_device *cdev)
+static int s3c_serial_init_port(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -71,7 +87,7 @@ static int s3c24x0_serial_init_port(struct console_device *cdev)
 	 */
 	writew(0x0245, base + UCON);
 
-#ifdef CONFIG_DRIVER_SERIAL_S3C24X0_AUTOSYNC
+#ifdef CONFIG_DRIVER_SERIAL_S3C_AUTOSYNC
 	writeb(0x10, base + UMCON); /* enable auto flow control */
 #else
 	writeb(0x01, base + UMCON); /* RTS up */
@@ -80,7 +96,7 @@ static int s3c24x0_serial_init_port(struct console_device *cdev)
 	return 0;
 }
 
-static void s3c24x0_serial_putc(struct console_device *cdev, char c)
+static void s3c_serial_putc(struct console_device *cdev, char c)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -92,7 +108,7 @@ static void s3c24x0_serial_putc(struct console_device *cdev, char c)
 	writeb(c, base + UTXH);
 }
 
-static int s3c24x0_serial_tstc(struct console_device *cdev)
+static int s3c_serial_tstc(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -104,7 +120,7 @@ static int s3c24x0_serial_tstc(struct console_device *cdev)
 	return 0;
 }
 
-static int s3c24x0_serial_getc(struct console_device *cdev)
+static int s3c_serial_getc(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -116,7 +132,7 @@ static int s3c24x0_serial_getc(struct console_device *cdev)
 	return readb(base + URXH);
 }
 
-static void s3c24x0_serial_flush(struct console_device *cdev)
+static void s3c_serial_flush(struct console_device *cdev)
 {
 	struct device_d *dev = cdev->dev;
 	void __iomem *base = dev->priv;
@@ -125,7 +141,7 @@ static void s3c24x0_serial_flush(struct console_device *cdev)
 		;
 }
 
-static int s3c24x0_serial_probe(struct device_d *dev)
+static int s3c_serial_probe(struct device_d *dev)
 {
 	struct console_device *cdev;
 
@@ -134,13 +150,13 @@ static int s3c24x0_serial_probe(struct device_d *dev)
 	dev->priv = dev_request_mem_region(dev, 0);
 	cdev->dev = dev;
 	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
-	cdev->tstc = s3c24x0_serial_tstc;
-	cdev->putc = s3c24x0_serial_putc;
-	cdev->getc = s3c24x0_serial_getc;
-	cdev->flush = s3c24x0_serial_flush;
-	cdev->setbrg = s3c24x0_serial_setbaudrate;
+	cdev->tstc = s3c_serial_tstc;
+	cdev->putc = s3c_serial_putc;
+	cdev->getc = s3c_serial_getc;
+	cdev->flush = s3c_serial_flush;
+	cdev->setbrg = s3c_serial_setbaudrate;
 
-	s3c24x0_serial_init_port(cdev);
+	s3c_serial_init_port(cdev);
 
 	/* Enable UART */
 	console_register(cdev);
@@ -148,25 +164,25 @@ static int s3c24x0_serial_probe(struct device_d *dev)
 	return 0;
 }
 
-static void s3c24x0_serial_remove(struct device_d *dev)
+static void s3c_serial_remove(struct device_d *dev)
 {
 	struct console_device *cdev = dev->type_data;
 
-	s3c24x0_serial_flush(cdev);
+	s3c_serial_flush(cdev);
 	free(cdev);
 	dev->type_data = NULL;
 }
 
-static struct driver_d s3c24x0_serial_driver = {
-	.name   = "s3c24x0_serial",
-	.probe  = s3c24x0_serial_probe,
-	.remove = s3c24x0_serial_remove,
+static struct driver_d s3c_serial_driver = {
+	.name   = "s3c_serial",
+	.probe  = s3c_serial_probe,
+	.remove = s3c_serial_remove,
 };
 
-static int s3c24x0_serial_init(void)
+static int s3c_serial_init(void)
 {
-	register_driver(&s3c24x0_serial_driver);
+	register_driver(&s3c_serial_driver);
 	return 0;
 }
 
-console_initcall(s3c24x0_serial_init);
+console_initcall(s3c_serial_init);
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (11 preceding siblings ...)
  2011-11-26 20:22 ` [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs Juergen Beisert
@ 2011-11-26 20:23 ` Juergen Beisert
  2011-11-26 20:23 ` [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs Juergen Beisert
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:23 UTC (permalink / raw)
  To: barebox

Keep common code in the MACH instead of re-inventing it in each platform.
Also use S3C* macros for all memory related register.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                |   47 ++++++----------------
 arch/arm/boards/a9m2410/lowlevel_init.S          |    4 +-
 arch/arm/boards/a9m2440/a9m2410dev.c             |    9 ++--
 arch/arm/boards/a9m2440/a9m2440.c                |   37 +++++++----------
 arch/arm/boards/a9m2440/lowlevel_init.S          |    6 +-
 arch/arm/boards/mini2440/lowlevel_init.S         |    4 +-
 arch/arm/boards/mini2440/mini2440.c              |   13 +++---
 arch/arm/mach-samsung/generic.c                  |   13 +++++-
 arch/arm/mach-samsung/include/mach/s3c-busctl.h  |   32 +++++++++++++++
 arch/arm/mach-samsung/include/mach/s3c-generic.h |    3 +-
 arch/arm/mach-samsung/include/mach/s3c-iomap.h   |   39 ++++++------------
 arch/arm/mach-samsung/lowlevel-init.S            |    4 +-
 arch/arm/mach-samsung/s3c24xx-clocks.c           |    9 +++-
 13 files changed, 111 insertions(+), 109 deletions(-)
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c-busctl.h

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index a66afb9..daaa5c1 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -34,6 +34,8 @@
 #include <io.h>
 #include <mach/s3c-iomap.h>
 #include <mach/s3c24xx-nand.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
 
 // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
 static struct s3c24x0_nand_platform_data nand_info = {
@@ -42,38 +44,13 @@ static struct s3c24x0_nand_platform_data nand_info = {
 
 static int a9m2410_mem_init(void)
 {
-	resource_size_t size = 0;
-	uint32_t reg;
+	resource_size_t size;
 
 	/*
-	 * detect the current memory size
 	 * Note: On this card the second SDRAM page is not used
 	 */
-	reg = readl(BANKSIZE);
-
-	switch (reg &= 0x7) {
-	case 0:
-		size = 32 * 1024 * 1024;
-		break;
-	case 1:
-		size = 64 * 1024 * 1024;
-		break;
-	case 2:
-		size = 128 * 1024 * 1024;
-		break;
-	case 4:
-		size = 2 * 1024 * 1024;
-		break;
-	case 5:
-		size = 4 * 1024 * 1024;
-		break;
-	case 6:
-		size = 8 * 1024 * 1024;
-		break;
-	case 7:
-		size = 16 * 1024 * 1024;
-		break;
-	}
+	s3c24xx_disable_second_sdram_bank();
+	size = s3c24xx_get_memory_size();
 
 	/* ---------- configure the GPIOs ------------- */
 	writel(0x007FFFFF, GPACON);
@@ -100,7 +77,7 @@ static int a9m2410_mem_init(void)
 	 */
 	writel(0x40140, MISCCR);
 
-	arm_add_mem_device("ram0", CS6_BASE, size);
+	arm_add_mem_device("ram0", S3C_SDRAM_BASE, size);
 
 	return 0;
 }
@@ -111,19 +88,19 @@ static int a9m2410_devices_init(void)
 	uint32_t reg;
 
 	/* ----------- configure the access to the outer space ---------- */
-	reg = readl(BWSCON);
+	reg = readl(S3C_BWSCON);
 
 	/* CS#1 to access the network controller */
 	reg &= ~0xf0;
 	reg |= 0xe0;
-	writel(0x1350, BANKCON1);
+	writel(0x1350, S3C_BANKCON1);
 
 	/* CS#2 to the dual 16550 UART */
 	reg &= ~0xf00;
 	reg |= 0x400;
-	writel(0x0d50, BANKCON2);
+	writel(0x0d50, S3C_BANKCON2);
 
-	writel(reg, BWSCON);
+	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to the network and UART device */
         reg = readl(MISCCR);
@@ -138,7 +115,7 @@ static int a9m2410_devices_init(void)
 	 * connected to CS line 1 and interrupt line
 	 * GPIO3, data width is 32 bit
 	 */
-	add_generic_device("smc91c111", -1, NULL, CS1_BASE + 0x300, 16,
+	add_generic_device("smc91c111", -1, NULL, S3C_CS1_BASE + 0x300, 16,
 			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_NAND
@@ -150,7 +127,7 @@ static int a9m2410_devices_init(void)
 	dev_add_bb_dev("env_raw", "env0");
 #endif
 
-	armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+	armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
 	armlinux_set_architecture(MACH_TYPE_A9M2410);
 
 	return 0;
diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S
index 752c668..a106d53 100644
--- a/arch/arm/boards/a9m2410/lowlevel_init.S
+++ b/arch/arm/boards/a9m2410/lowlevel_init.S
@@ -15,9 +15,9 @@ board_init_lowlevel:
 	bl s3c24x0_disable_wd
 
 	/* skip everything here if we are already running from SDRAM */
-	cmp pc, #S3C24X0_SDRAM_BASE
+	cmp pc, #S3C_SDRAM_BASE
 	blo 1f
-	cmp pc, #S3C24X0_SDRAM_END
+	cmp pc, #S3C_SDRAM_END
 	bhs 1f
 
 	mov pc, r10
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
index aa5da88..1da69eb 100644
--- a/arch/arm/boards/a9m2440/a9m2410dev.c
+++ b/arch/arm/boards/a9m2440/a9m2410dev.c
@@ -29,6 +29,7 @@
 #include <init.h>
 #include <io.h>
 #include <mach/s3c-iomap.h>
+#include <mach/s3c-busctl.h>
 
 /**
  * Initialize the CPU to be able to work with the a9m2410dev evaluation board
@@ -72,19 +73,19 @@ int a9m2410dev_devices_init(void)
 	writel((readl(MISCCR) & ~0xFFFF) | 0x0140, MISCCR);
 
 	/* ----------- configure the access to the outer space ---------- */
-	reg = readl(BWSCON);
+	reg = readl(S3C_BWSCON);
 
 	/* CS#1 to access the network controller */
 	reg &= ~0xf0;
 	reg |= 0xe0;
-	writel(0x1350, BANKCON1);
+	writel(0x1350, S3C_BANKCON1);
 
 	/* CS#2 to the dual 16550 UART */
 	reg &= ~0xf00;
 	reg |= 0x400;
-	writel(0x0d50, BANKCON2);
+	writel(0x0d50, S3C_BANKCON2);
 
-	writel(reg, BWSCON);
+	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to the network and UART device */
         reg = readl(MISCCR);
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 077d726..56ae914 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -35,6 +35,7 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
 
 #include "baseboards.h"
 
@@ -66,12 +67,6 @@ static int a9m2440_check_for_ram(uint32_t addr)
 	return rc;
 }
 
-static void a9m2440_disable_second_sdram_bank(void)
-{
-	writel(readl(BANKCON7) & ~(0x3 << 15),BANKCON7);
-	writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable clock */
-}
-
 static int a9m2440_mem_init(void)
 {
 	/*
@@ -80,30 +75,30 @@ static int a9m2440_mem_init(void)
 	 * So we must check here, if the second bank is populated to get the
 	 * correct RAM size.
 	 */
-	switch (readl(BANKSIZE) & 0x7) {
+	switch (readl(S3C_BANKSIZE) & 0x7) {
 	case 0:
-		if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 32 * 1024 * 1024))
-			a9m2440_disable_second_sdram_bank();
+		if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 32 * 1024 * 1024))
+			s3c24xx_disable_second_sdram_bank();
 		break;
 	case 1:
-		if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 64 * 1024 * 1024))
-			a9m2440_disable_second_sdram_bank();
+		if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 64 * 1024 * 1024))
+			s3c24xx_disable_second_sdram_bank();
 		break;
 	case 2:
-		if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 128 * 1024 * 1024))
-			a9m2440_disable_second_sdram_bank();
+		if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 128 * 1024 * 1024))
+			s3c24xx_disable_second_sdram_bank();
 		break;
 	case 4:
 	case 5:
 	case 6:		/* not supported on this machine */
 		break;
 	default:
-		if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 16 * 1024 * 1024))
-			a9m2440_disable_second_sdram_bank();
+		if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 16 * 1024 * 1024))
+			s3c24xx_disable_second_sdram_bank();
 		break;
 	}
 
-	arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size());
+	arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
 
 	return 0;
 }
@@ -114,14 +109,14 @@ static int a9m2440_devices_init(void)
 	uint32_t reg;
 
 	/* ----------- configure the access to the outer space ---------- */
-	reg = readl(BWSCON);
+	reg = readl(S3C_BWSCON);
 
 	/* CS#5 to access the network controller */
 	reg &= ~0x00f00000;
 	reg |=  0x00d00000;	/* 16 bit */
-	writel(0x1f4c, BANKCON5);
+	writel(0x1f4c, S3C_BANKCON5);
 
-	writel(reg, BWSCON);
+	writel(reg, S3C_BWSCON);
 
 #ifdef CONFIG_MACH_A9M2410DEV
 	a9m2410dev_devices_init();
@@ -140,7 +135,7 @@ static int a9m2440_devices_init(void)
 	 * Connected to CS line 5 + A24 and interrupt line EINT9,
 	 * data width is 16 bit
 	 */
-	add_generic_device("cs8900", -1, NULL, CS5_BASE + (1 << 24) + 0x300, 16,
+	add_generic_device("cs8900", -1, NULL, S3C_CS5_BASE + (1 << 24) + 0x300, 16,
 			   IORESOURCE_MEM, NULL);
 
 #ifdef CONFIG_NAND
@@ -151,7 +146,7 @@ static int a9m2440_devices_init(void)
 	devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
 	dev_add_bb_dev("env_raw", "env0");
 #endif
-	armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+	armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
 	armlinux_set_architecture(MACH_TYPE_A9M2440);
 
 	return 0;
diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
index bfdd7f0..57ebe3f 100644
--- a/arch/arm/boards/a9m2440/lowlevel_init.S
+++ b/arch/arm/boards/a9m2440/lowlevel_init.S
@@ -37,7 +37,7 @@ sdram_init:
 	ldr r4, [r1]
 	and r4, r4, #0x3
 
-	ldr r1, =S3C24X0_MEMCTL_BASE
+	ldr r1, =S3C_MEMCTL_BASE
 	/* configure both SDRAM areas with 32 bit data bus width */
 	ldr r0, =((0x2 << 24) + (0x2 << 28))
 	str r0, [r1], #0x1c	/* post add register offset for bank6 */
@@ -218,9 +218,9 @@ board_init_lowlevel:
 	bl s3c24x0_disable_wd
 
 	/* skip everything here if we are already running from SDRAM */
-	cmp pc, #S3C24X0_SDRAM_BASE
+	cmp pc, #S3C_SDRAM_BASE
 	blo 1f
-	cmp pc, #S3C24X0_SDRAM_END
+	cmp pc, #S3C_SDRAM_END
 	bhs 1f
 
 	mov pc, r10
diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S
index f114bb7..1c8860a 100644
--- a/arch/arm/boards/mini2440/lowlevel_init.S
+++ b/arch/arm/boards/mini2440/lowlevel_init.S
@@ -17,9 +17,9 @@ board_init_lowlevel:
 	bl s3c24x0_disable_wd
 
 	/* skip everything here if we are already running from SDRAM */
-	cmp pc, #S3C24X0_SDRAM_BASE
+	cmp pc, #S3C_SDRAM_BASE
 	blo 1f
-	cmp pc, #S3C24X0_SDRAM_END
+	cmp pc, #S3C_SDRAM_END
 	bhs 1f
 
 	mov pc, r10
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 9270c18..4fb92bf 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -43,6 +43,7 @@
 #include <mach/s3c-generic.h>
 #include <mach/s3c-mci.h>
 #include <mach/s3c24xx-fb.h>
+#include <mach/s3c-busctl.h>
 
 static struct s3c24x0_nand_platform_data nand_info = {
 	.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
@@ -266,7 +267,7 @@ static const unsigned pin_usage[] = {
 
 static int mini2440_mem_init(void)
 {
-	arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size());
+	arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
 
 	return 0;
 }
@@ -281,14 +282,14 @@ static int mini2440_devices_init(void)
 	for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
 		s3c_gpio_mode(pin_usage[i]);
 
-	reg = readl(BWSCON);
+	reg = readl(S3C_BWSCON);
 
 	/* CS#4 to access the network controller */
 	reg &= ~0x000f0000;
 	reg |=  0x000d0000;	/* 16 bit */
-	writel(0x1f4c, BANKCON4);
+	writel(0x1f4c, S3C_BANKCON4);
 
-	writel(reg, BWSCON);
+	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to external devices */
 	reg = readl(MISCCR);
@@ -298,7 +299,7 @@ static int mini2440_devices_init(void)
 	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
 			   IORESOURCE_MEM, &nand_info);
 
-	add_dm9000_device(0, CS4_BASE + 0x300, CS4_BASE + 0x304,
+	add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304,
 			  IORESOURCE_MEM_16BIT, &dm9000_data);
 #ifdef CONFIG_NAND
 	/* ----------- add some vital partitions -------- */
@@ -316,7 +317,7 @@ static int mini2440_devices_init(void)
 			   IORESOURCE_MEM, &s3c24x0_fb_data);
 	add_generic_device("ohci", 0, NULL, S3C2410_USB_HOST_BASE, 0x100,
 			   IORESOURCE_MEM, NULL);
-	armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+	armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
 	armlinux_set_architecture(MACH_TYPE_MINI2440);
 
 	return 0;
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 4a0c87b..884f987 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -29,19 +29,20 @@
 #include <io.h>
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
 
 /**
  * Calculate the amount of connected and available memory
  * @return Memory size in bytes
  */
-uint32_t s3c24x0_get_memory_size(void)
+uint32_t s3c24xx_get_memory_size(void)
 {
 	uint32_t reg, size;
 
 	/*
 	 * detect the current memory size
 	 */
-	reg = readl(BANKSIZE);
+	reg = readl(S3C_BANKSIZE);
 
 	switch (reg & 0x7) {
 	case 0:
@@ -70,12 +71,18 @@ uint32_t s3c24x0_get_memory_size(void)
 	/*
 	 * Is bank7 also configured for SDRAM usage?
 	 */
-	if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+	if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
 		size <<= 1;	/* also count this bank */
 
 	return size;
 }
 
+void s3c24xx_disable_second_sdram_bank(void)
+{
+	writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7);
+	writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable clock */
+}
+
 #define S3C_WTCON (S3C_WATCHDOG_BASE)
 #define S3C_WTDAT (S3C_WATCHDOG_BASE + 0x04)
 #define S3C_WTCNT (S3C_WATCHDOG_BASE + 0x08)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-busctl.h b/arch/arm/mach-samsung/include/mach/s3c-busctl.h
new file mode 100644
index 0000000..4bcf0a7
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c-busctl.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_S3C_BUSCTL_H
+# define __MACH_S3C_BUSCTL_H
+
+#define S3C_BWSCON (S3C_MEMCTL_BASE)
+#define S3C_BANKCON0 (S3C_MEMCTL_BASE + 0x04)
+#define S3C_BANKCON1 (S3C_MEMCTL_BASE + 0x08)
+#define S3C_BANKCON2 (S3C_MEMCTL_BASE + 0x0c)
+#define S3C_BANKCON3 (S3C_MEMCTL_BASE + 0x10)
+#define S3C_BANKCON4 (S3C_MEMCTL_BASE + 0x14)
+#define S3C_BANKCON5 (S3C_MEMCTL_BASE + 0x18)
+#define S3C_BANKCON6 (S3C_MEMCTL_BASE + 0x1c)
+#define S3C_BANKCON7 (S3C_MEMCTL_BASE + 0x20)
+#define S3C_REFRESH (S3C_MEMCTL_BASE + 0x24)
+#define S3C_BANKSIZE (S3C_MEMCTL_BASE + 0x28)
+#define S3C_MRSRB6 (S3C_MEMCTL_BASE + 0x2c)
+#define S3C_MRSRB7 (S3C_MEMCTL_BASE + 0x30)
+
+#endif /* __MACH_S3C_BUSCTL_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 0909c0e..0eeb7dc 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -32,5 +32,6 @@ uint32_t s3c_get_pclk(void);
 uint32_t s3c_get_uclk(void);
 void s3c_init_t4_clk_source(void);
 unsigned s3c_get_t4_clk(void);
-uint32_t s3c24x0_get_memory_size(void);
+uint32_t s3c24xx_get_memory_size(void);
+void s3c24xx_disable_second_sdram_bank(void);
 
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 7c45c53..4f713be 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -19,9 +19,7 @@
  */
 
 /* S3C2410 device base addresses */
-#define S3C24X0_SDRAM_BASE		0x30000000
-#define S3C24X0_SDRAM_END		0x40000000
-#define S3C24X0_MEMCTL_BASE		0x48000000
+#define S3C_MEMCTL_BASE			0x48000000
 #define S3C2410_USB_HOST_BASE		0x49000000
 #define S3C2410_INTERRUPT_BASE		0x4A000000
 #define S3C2410_DMA_BASE		0x4B000000
@@ -40,6 +38,17 @@
 #define S3C2410_SPI_BASE		0x59000000
 #define S3C2410_SDI_BASE		0x5A000000
 
+/* external IO space */
+#define S3C_CS0_BASE 0x00000000
+#define S3C_CS1_BASE 0x08000000
+#define S3C_CS2_BASE 0x10000000
+#define S3C_CS3_BASE 0x18000000
+#define S3C_CS4_BASE 0x20000000
+#define S3C_CS5_BASE 0x28000000
+#define S3C_CS6_BASE 0x30000000
+
+#define S3C_SDRAM_BASE S3C_CS6_BASE
+#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000)
 
 /*
  * if we are booting from NAND, its internal SRAM occures at
@@ -59,21 +68,6 @@
 #define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
 #define S3C_UART3_SIZE 0x4000
 
-/* CS configuration (direct access) */
-#define BWSCON (S3C24X0_MEMCTL_BASE)
-#define BANKCON0 (S3C24X0_MEMCTL_BASE + 0x04)
-#define BANKCON1 (S3C24X0_MEMCTL_BASE + 0x08)
-#define BANKCON2 (S3C24X0_MEMCTL_BASE + 0x0c)
-#define BANKCON3 (S3C24X0_MEMCTL_BASE + 0x10)
-#define BANKCON4 (S3C24X0_MEMCTL_BASE + 0x14)
-#define BANKCON5 (S3C24X0_MEMCTL_BASE + 0x18)
-#define BANKCON6 (S3C24X0_MEMCTL_BASE + 0x1c)
-#define BANKCON7 (S3C24X0_MEMCTL_BASE + 0x20)
-#define REFRESH (S3C24X0_MEMCTL_BASE + 0x24)
-#define BANKSIZE (S3C24X0_MEMCTL_BASE + 0x28)
-#define MRSRB6 (S3C24X0_MEMCTL_BASE + 0x2c)
-#define MRSRB7 (S3C24X0_MEMCTL_BASE + 0x30)
-
 /* GPIO registers (direct access) */
 #define GPACON (S3C24X0_GPIO_BASE)
 #define GPADAT (S3C24X0_GPIO_BASE + 0x04)
@@ -133,12 +127,3 @@
 # define DSC0 (S3C24X0_GPIO_BASE + 0xc4)
 # define DSC1 (S3C24X0_GPIO_BASE + 0xc8)
 #endif
-
-/* external IO space */
-#define CS0_BASE 0x00000000
-#define CS1_BASE 0x08000000
-#define CS2_BASE 0x10000000
-#define CS3_BASE 0x18000000
-#define CS4_BASE 0x20000000
-#define CS5_BASE 0x28000000
-#define CS6_BASE 0x30000000
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
index 93ea3ce..31c6196 100644
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ b/arch/arm/mach-samsung/lowlevel-init.S
@@ -192,7 +192,7 @@ With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
 s3c24x0_sdram_init:
 
 	adr r0, SDRAMDATA	/* get the current relative address of the table */
-	mov r1, #S3C24X0_MEMCTL_BASE
+	mov r1, #S3C_MEMCTL_BASE
 	mov r2, #6		/* we *know* it contains 6 entries */
 
 	ldr r3, [r0], #4	/* write BSWCON first */
@@ -255,7 +255,7 @@ s3c24x0_nand_boot:
  * In the case of NOR boot we are running from the same address space.
  * Detect this case to handle it correctly.
  */
-	mov r1, #S3C24X0_MEMCTL_BASE
+	mov r1, #S3C_MEMCTL_BASE
 	ldr r3, [r1]
 	and r3, r3, #0x6
 	cmp r3, #0x0	/* check for NAND case */
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
index 3a230b2..15ca59e 100644
--- a/arch/arm/mach-samsung/s3c24xx-clocks.c
+++ b/arch/arm/mach-samsung/s3c24xx-clocks.c
@@ -22,6 +22,7 @@
 #include <mach/s3c-generic.h>
 #include <mach/s3c-clocks.h>
 #include <mach/s3c-timer.h>
+#include <mach/s3c-busctl.h>
 
 /**
  * Calculate the current M-PLL clock.
@@ -151,9 +152,11 @@ int s3c24xx_dump_clocks(void)
 	printf("fclk:    %7d kHz\n", s3c_get_fclk() / 1000);
 	printf("hclk:    %7d kHz\n", s3c_get_hclk() / 1000);
 	printf("pclk:    %7d kHz\n", s3c_get_pclk() / 1000);
-	printf("SDRAM1:   CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000);
-	if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
-		printf("SDRAM2:   CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2,
+	printf("SDRAM1:   CL%d@%dMHz\n", ((readl(S3C_BANKCON6) & 0xc) >> 2) + 2,
+						s3c_get_hclk() / 1000000);
+	if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+		printf("SDRAM2:   CL%d@%dMHz\n",
+			((readl(S3C_BANKCON7) & 0xc) >> 2) + 2,
 			s3c_get_hclk() / 1000000);
 	return 0;
 }
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs
  2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
                   ` (12 preceding siblings ...)
  2011-11-26 20:23 ` [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling Juergen Beisert
@ 2011-11-26 20:23 ` Juergen Beisert
  13 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-11-26 20:23 UTC (permalink / raw)
  To: barebox

a) use the more CPU specific S3C* macro names
b) move the register description out of the way, as more recent CPUs using a
   different layout and more features

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/boards/a9m2410/a9m2410.c                 |   41 ++++++------
 arch/arm/boards/a9m2440/a9m2410dev.c              |   53 +++++++-------
 arch/arm/boards/a9m2440/a9m2440.c                 |    5 +-
 arch/arm/boards/a9m2440/lowlevel_init.S           |    3 +-
 arch/arm/boards/mini2440/mini2440.c               |    5 +-
 arch/arm/mach-samsung/generic.c                   |    3 +-
 arch/arm/mach-samsung/gpio-s3c24x0.c              |   31 ++++----
 arch/arm/mach-samsung/include/mach/gpio-s3c24xx.h |   77 +++++++++++++++++++++
 arch/arm/mach-samsung/include/mach/s3c-iomap.h    |   62 +----------------
 9 files changed, 152 insertions(+), 128 deletions(-)
 create mode 100644 arch/arm/mach-samsung/include/mach/gpio-s3c24xx.h

diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index daaa5c1..d21f20e 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -36,6 +36,7 @@
 #include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24xx.h>
 
 // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
 static struct s3c24x0_nand_platform_data nand_info = {
@@ -53,29 +54,29 @@ static int a9m2410_mem_init(void)
 	size = s3c24xx_get_memory_size();
 
 	/* ---------- configure the GPIOs ------------- */
-	writel(0x007FFFFF, GPACON);
-	writel(0x00000000, GPCCON);
-	writel(0x00000000, GPCUP);
-	writel(0x00000000, GPDCON);
-	writel(0x00000000, GPDUP);
-	writel(0xAAAAAAAA, GPECON);
-	writel(0x0000E03F, GPEUP);
-	writel(0x00000000, GPBCON);	/* all inputs */
-	writel(0x00000007, GPBUP);	/* pullup disabled for GPB0..3 */
-	writel(0x00009000, GPFCON);	/* GPF7 CLK_INT#, GPF6 Debug-LED */
-	writel(0x000000FF, GPFUP);
-	writel(readl(GPGDAT) | 0x0010, GPGDAT);	/* switch off LCD backlight */
-	writel(0xFF00A938, GPGCON);	/* switch off USB device */
-	writel(0x0000F000, GPGUP);
-	writel(readl(GPHDAT) | 0x100, GPHDAT);	/* switch BOOTINT/GPIO_ON# to high */
-	writel(0x000007FF, GPHUP);
-	writel(0x0029FAAA, GPHCON);
+	writel(0x007FFFFF, S3C_GPACON);
+	writel(0x00000000, S3C_GPCCON);
+	writel(0x00000000, S3C_GPCUP);
+	writel(0x00000000, S3C_GPDCON);
+	writel(0x00000000, S3C_GPDUP);
+	writel(0xAAAAAAAA, S3C_GPECON);
+	writel(0x0000E03F, S3C_GPEUP);
+	writel(0x00000000, S3C_GPBCON);	/* all inputs */
+	writel(0x00000007, S3C_GPBUP);	/* pullup disabled for GPB0..3 */
+	writel(0x00009000, S3C_GPFCON);	/* GPF7 CLK_INT#, GPF6 Debug-LED */
+	writel(0x000000FF, S3C_GPFUP);
+	writel(readl(S3C_GPGDAT) | 0x0010, S3C_GPGDAT);	/* switch off LCD backlight */
+	writel(0xFF00A938, S3C_GPGCON);	/* switch off USB device */
+	writel(0x0000F000, S3C_GPGUP);
+	writel(readl(S3C_GPHDAT) | 0x100, S3C_GPHDAT);	/* switch BOOTINT/GPIO_ON# to high */
+	writel(0x000007FF, S3C_GPHUP);
+	writel(0x0029FAAA, S3C_GPHCON);
 	/*
 	 * USB port1 normal, USB port0 normal, USB1 pads for device
 	 * PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
 	 * 2nd SDRAM bank off (only bank 1 is used)
 	 */
-	writel(0x40140, MISCCR);
+	writel(0x40140, S3C_MISCCR);
 
 	arm_add_mem_device("ram0", S3C_SDRAM_BASE, size);
 
@@ -103,9 +104,9 @@ static int a9m2410_devices_init(void)
 	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to the network and UART device */
-        reg = readl(MISCCR);
+	reg = readl(S3C_MISCCR);
 	reg |= 0x10000;
-	writel(reg, MISCCR);
+	writel(reg, S3C_MISCCR);
 
 	/* ----------- the devices the boot loader should work with -------- */
 	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
index 1da69eb..33891cb 100644
--- a/arch/arm/boards/a9m2440/a9m2410dev.c
+++ b/arch/arm/boards/a9m2440/a9m2410dev.c
@@ -30,6 +30,7 @@
 #include <io.h>
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24xx.h>
 
 /**
  * Initialize the CPU to be able to work with the a9m2410dev evaluation board
@@ -39,38 +40,38 @@ int a9m2410dev_devices_init(void)
 	unsigned int reg;
 
 	/* ---------- configure the GPIOs ------------- */
-	writel(0x007FFFFF, GPACON);
-	writel(0x00000000, GPCCON);
-	writel(0x00000000, GPCUP);
-	writel(0x00000000, GPDCON);
-	writel(0x00000000, GPDUP);
-	writel(0xAAAAAAAA, GPECON);
-	writel(0x0000E03F, GPEUP);
-	writel(0x00000000, GPBCON);	/* all inputs */
-	writel(0x00000007, GPBUP);	/* pullup disabled for GPB0..3 */
-	writel(0x00009000, GPFCON);	/* GPF7 CLK_INT#, GPF6 Debug-LED */
-	writel(0x000000FF, GPFUP);
-	writel(readl(GPGDAT) | 0x1010, GPGDAT);	/* switch off IDLE_SW#, switch off LCD backlight */
-	writel(0x0100A93A, GPGCON);	/* switch on USB device */
-	writel(0x0000F000, GPGUP);
-	writel(0x0029FAAA, GPHCON);
+	writel(0x007FFFFF, S3C_GPACON);
+	writel(0x00000000, S3C_GPCCON);
+	writel(0x00000000, S3C_GPCUP);
+	writel(0x00000000, S3C_GPDCON);
+	writel(0x00000000, S3C_GPDUP);
+	writel(0xAAAAAAAA, S3C_GPECON);
+	writel(0x0000E03F, S3C_GPEUP);
+	writel(0x00000000, S3C_GPBCON);	/* all inputs */
+	writel(0x00000007, S3C_GPBUP);	/* pullup disabled for GPB0..3 */
+	writel(0x00009000, S3C_GPFCON);	/* GPF7 CLK_INT#, GPF6 Debug-LED */
+	writel(0x000000FF, S3C_GPFUP);
+	writel(readl(S3C_GPGDAT) | 0x1010, S3C_GPGDAT);	/* switch off IDLE_SW#, switch off LCD backlight */
+	writel(0x0100A93A, S3C_GPGCON);	/* switch on USB device */
+	writel(0x0000F000, S3C_GPGUP);
+	writel(0x0029FAAA, S3C_GPHCON);
 
-	writel((1 << 12) | (0 << 11), GPJDAT);
-	writel(0x0016aaaa, GPJCON);
-	writel(~((0<<12)| (1<<11)), GPJUP);
+	writel((1 << 12) | (0 << 11), S3C_GPJDAT);
+	writel(0x0016aaaa, S3C_GPJCON);
+	writel(~((0<<12)| (1<<11)), S3C_GPJUP);
 
-	writel((0 << 12) | (0 << 11), GPJDAT);
-	writel(0x0016aaaa, GPJCON);
-	writel(0x00001fff, GPJUP);
+	writel((0 << 12) | (0 << 11), S3C_GPJDAT);
+	writel(0x0016aaaa, S3C_GPJCON);
+	writel(0x00001fff, S3C_GPJUP);
 
-	writel(0x00000000, DSC0);
-	writel(0x00000000, DSC1);
+	writel(0x00000000, S3C_DSC0);
+	writel(0x00000000, S3C_DSC1);
 
 	/*
 	 * USB port1 normal, USB port0 normal, USB1 pads for device
 	 * PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
 	 */
-	writel((readl(MISCCR) & ~0xFFFF) | 0x0140, MISCCR);
+	writel((readl(S3C_MISCCR) & ~0xFFFF) | 0x0140, S3C_MISCCR);
 
 	/* ----------- configure the access to the outer space ---------- */
 	reg = readl(S3C_BWSCON);
@@ -88,9 +89,9 @@ int a9m2410dev_devices_init(void)
 	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to the network and UART device */
-        reg = readl(MISCCR);
+	reg = readl(S3C_MISCCR);
 	reg |= 0x10000;
-	writel(reg, MISCCR);
+	writel(reg, S3C_MISCCR);
 
 	return 0;
 }
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 56ae914..76abe55 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -36,6 +36,7 @@
 #include <mach/s3c24xx-nand.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24xx.h>
 
 #include "baseboards.h"
 
@@ -123,9 +124,9 @@ static int a9m2440_devices_init(void)
 #endif
 
 	/* release the reset signal to external devices */
-	reg = readl(MISCCR);
+	reg = readl(S3C_MISCCR);
 	reg |= 0x10000;
-	writel(reg, MISCCR);
+	writel(reg, S3C_MISCCR);
 
 	/* ----------- the devices the boot loader should work with -------- */
 	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
index 57ebe3f..a369091 100644
--- a/arch/arm/boards/a9m2440/lowlevel_init.S
+++ b/arch/arm/boards/a9m2440/lowlevel_init.S
@@ -4,6 +4,7 @@
 
 #include <config.h>
 #include <mach/s3c-iomap.h>
+#include <mach/gpio-s3c24xx.h>
 
 	.section ".text_bare_init.board_init_lowlevel","ax"
 
@@ -33,7 +34,7 @@ sdram_init:
 	 * configured yet, these pins show external settings, to detect
 	 * the SDRAM size.
 	 */
-	ldr r1, =GPBDAT
+	ldr r1, =S3C_GPBDAT
 	ldr r4, [r1]
 	and r4, r4, #0x3
 
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 4fb92bf..ea84051 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -44,6 +44,7 @@
 #include <mach/s3c-mci.h>
 #include <mach/s3c24xx-fb.h>
 #include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24xx.h>
 
 static struct s3c24x0_nand_platform_data nand_info = {
 	.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
@@ -292,9 +293,9 @@ static int mini2440_devices_init(void)
 	writel(reg, S3C_BWSCON);
 
 	/* release the reset signal to external devices */
-	reg = readl(MISCCR);
+	reg = readl(S3C_MISCCR);
 	reg |= 0x10000;
-	writel(reg, MISCCR);
+	writel(reg, S3C_MISCCR);
 
 	add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
 			   IORESOURCE_MEM, &nand_info);
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 884f987..5125b22 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -30,6 +30,7 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
 #include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24xx.h>
 
 /**
  * Calculate the amount of connected and available memory
@@ -80,7 +81,7 @@ uint32_t s3c24xx_get_memory_size(void)
 void s3c24xx_disable_second_sdram_bank(void)
 {
 	writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7);
-	writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable clock */
+	writel(readl(S3C_MISCCR) | (1 << 18), S3C_MISCCR); /* disable clock */
 }
 
 #define S3C_WTCON (S3C_WATCHDOG_BASE)
diff --git a/arch/arm/mach-samsung/gpio-s3c24x0.c b/arch/arm/mach-samsung/gpio-s3c24x0.c
index 9994c92..2cae134 100644
--- a/arch/arm/mach-samsung/gpio-s3c24x0.c
+++ b/arch/arm/mach-samsung/gpio-s3c24x0.c
@@ -20,6 +20,7 @@
 #include <io.h>
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-gpio.h>
+#include <mach/gpio-s3c24xx.h>
 
 static const unsigned char group_offset[] =
 {
@@ -45,10 +46,10 @@ void gpio_set_value(unsigned gpio, int value)
 
 	offset = group_offset[group];
 
-	reg = readl(GPADAT + offset);
+	reg = readl(S3C_GPADAT + offset);
 	reg &= ~(1 << bit);
 	reg |= (!!value) << bit;
-	writel(reg, GPADAT + offset);
+	writel(reg, S3C_GPADAT + offset);
 }
 
 int gpio_direction_input(unsigned gpio)
@@ -60,9 +61,9 @@ int gpio_direction_input(unsigned gpio)
 
 	offset = group_offset[group];
 
-	reg = readl(GPACON + offset);
+	reg = readl(S3C_GPACON + offset);
 	reg &= ~(0x3 << (bit << 1));
-	writel(reg, GPACON + offset);
+	writel(reg, S3C_GPACON + offset);
 
 	return 0;
 }
@@ -81,14 +82,14 @@ int gpio_direction_output(unsigned gpio, int value)
 	gpio_set_value(gpio,value);
 	/* direction */
 	if (group == 0) {	/* GPA is special */
-		reg = readl(GPACON);
+		reg = readl(S3C_GPACON);
 		reg &= ~(1 << bit);
-		writel(reg, GPACON);
+		writel(reg, S3C_GPACON);
 	} else {
-		reg = readl(GPACON + offset);
+		reg = readl(S3C_GPACON + offset);
 		reg &= ~(0x3 << (bit << 1));
 		reg |= 0x1 << (bit << 1);
-		writel(reg, GPACON + offset);
+		writel(reg, S3C_GPACON + offset);
 	}
 
 	return 0;
@@ -107,7 +108,7 @@ int gpio_get_value(unsigned gpio)
 	offset = group_offset[group];
 
 	/* value */
-	reg = readl(GPADAT + offset);
+	reg = readl(S3C_GPADAT + offset);
 
 	return !!(reg & (1 << bit));
 }
@@ -132,9 +133,9 @@ void s3c_gpio_mode(unsigned gpio_mode)
 			gpio_direction_output(bit, GET_GPIOVAL(gpio_mode));
 			break;
 		default:
-			reg = readl(GPACON);
+			reg = readl(S3C_GPACON);
 			reg |= 1 << bit;
-			writel(reg, GPACON);
+			writel(reg, S3C_GPACON);
 			break;
 		}
 		return;
@@ -143,12 +144,12 @@ void s3c_gpio_mode(unsigned gpio_mode)
 	offset = group_offset[group];
 
 	if (PU_PRESENT(gpio_mode)) {
-		reg = readl(GPACON + offset + 8);
+		reg = readl(S3C_GPACON + offset + 8);
 		if (GET_PU(gpio_mode))
 			reg |= (1 << bit);	/* set means _disabled_ */
 		else
 			reg &= ~(1 << bit);
-		writel(reg, GPACON + offset + 8);
+		writel(reg, S3C_GPACON + offset + 8);
 	}
 
 	switch (func) {
@@ -160,10 +161,10 @@ void s3c_gpio_mode(unsigned gpio_mode)
 		break;
 	case 2: /* function one */
 	case 3: /* function two */
-		reg = readl(GPACON + offset);
+		reg = readl(S3C_GPACON + offset);
 		reg &= ~(0x3 << (bit << 1));
 		reg |= func << (bit << 1);
-		writel(reg, GPACON + offset);
+		writel(reg, S3C_GPACON + offset);
 		break;
 	}
 }
diff --git a/arch/arm/mach-samsung/include/mach/gpio-s3c24xx.h b/arch/arm/mach-samsung/include/mach/gpio-s3c24xx.h
new file mode 100644
index 0000000..c835974
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/gpio-s3c24xx.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_S3C24XX_GPIO_H
+# define __MACH_S3C24XX_GPIO_H
+
+#define S3C_GPACON (S3C_GPIO_BASE)
+#define S3C_GPADAT (S3C_GPIO_BASE + 0x04)
+
+#define S3C_GPBCON (S3C_GPIO_BASE + 0x10)
+#define S3C_GPBDAT (S3C_GPIO_BASE + 0x14)
+#define S3C_GPBUP (S3C_GPIO_BASE + 0x18)
+
+#define S3C_GPCCON (S3C_GPIO_BASE + 0x20)
+#define S3C_GPCDAT (S3C_GPIO_BASE + 0x24)
+#define S3C_GPCUP (S3C_GPIO_BASE + 0x28)
+
+#define S3C_GPDCON (S3C_GPIO_BASE + 0x30)
+#define S3C_GPDDAT (S3C_GPIO_BASE + 0x34)
+#define S3C_GPDUP (S3C_GPIO_BASE + 0x38)
+
+#define S3C_GPECON (S3C_GPIO_BASE + 0x40)
+#define S3C_GPEDAT (S3C_GPIO_BASE + 0x44)
+#define S3C_GPEUP (S3C_GPIO_BASE + 0x48)
+
+#define S3C_GPFCON (S3C_GPIO_BASE + 0x50)
+#define S3C_GPFDAT (S3C_GPIO_BASE + 0x54)
+#define S3C_GPFUP (S3C_GPIO_BASE + 0x58)
+
+#define S3C_GPGCON (S3C_GPIO_BASE + 0x60)
+#define S3C_GPGDAT (S3C_GPIO_BASE + 0x64)
+#define S3C_GPGUP (S3C_GPIO_BASE + 0x68)
+
+#define S3C_GPHCON (S3C_GPIO_BASE + 0x70)
+#define S3C_GPHDAT (S3C_GPIO_BASE + 0x74)
+#define S3C_GPHUP (S3C_GPIO_BASE + 0x78)
+
+#ifdef CONFIG_CPU_S3C2440
+# define S3C_GPJCON (S3C_GPIO_BASE + 0xd0)
+# define S3C_GPJDAT (S3C_GPIO_BASE + 0xd4)
+# define S3C_GPJUP (S3C_GPIO_BASE + 0xd8)
+#endif
+
+#define S3C_MISCCR  (S3C_GPIO_BASE + 0x80)
+#define S3C_DCLKCON (S3C_GPIO_BASE + 0x84)
+#define S3C_EXTINT0 (S3C_GPIO_BASE + 0x88)
+#define S3C_EXTINT1 (S3C_GPIO_BASE + 0x8c)
+#define S3C_EXTINT2 (S3C_GPIO_BASE + 0x90)
+#define S3C_EINTFLT0 (S3C_GPIO_BASE + 0x94)
+#define S3C_EINTFLT1 (S3C_GPIO_BASE + 0x98)
+#define S3C_EINTFLT2 (S3C_GPIO_BASE + 0x9c)
+#define S3C_EINTFLT3 (S3C_GPIO_BASE + 0xa0)
+#define S3C_EINTMASK (S3C_GPIO_BASE + 0xa4)
+#define S3C_EINTPEND (S3C_GPIO_BASE + 0xa8)
+#define S3C_GSTATUS0 (S3C_GPIO_BASE + 0xac)
+#define S3C_GSTATUS1 (S3C_GPIO_BASE + 0xb0)
+#define S3C_GSTATUS2 (S3C_GPIO_BASE + 0xb4)
+#define S3C_GSTATUS3 (S3C_GPIO_BASE + 0xb8)
+#define S3C_GSTATUS4 (S3C_GPIO_BASE + 0xbc)
+
+#ifdef CONFIG_CPU_S3C2440
+# define S3C_DSC0 (S3C_GPIO_BASE + 0xc4)
+# define S3C_DSC1 (S3C_GPIO_BASE + 0xc8)
+#endif
+
+#endif /* __MACH_S3C24XX_GPIO_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 4f713be..9e867f8 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -32,7 +32,7 @@
 #define S3C_WATCHDOG_BASE		0x53000000
 #define S3C2410_I2C_BASE		0x54000000
 #define S3C2410_I2S_BASE		0x55000000
-#define S3C24X0_GPIO_BASE		0x56000000
+#define S3C_GPIO_BASE			0x56000000
 #define S3C2410_RTC_BASE		0x57000000
 #define S3C2410_ADC_BASE		0x58000000
 #define S3C2410_SPI_BASE		0x59000000
@@ -67,63 +67,3 @@
 #define S3C_UART2_SIZE 0x4000
 #define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
 #define S3C_UART3_SIZE 0x4000
-
-/* GPIO registers (direct access) */
-#define GPACON (S3C24X0_GPIO_BASE)
-#define GPADAT (S3C24X0_GPIO_BASE + 0x04)
-
-#define GPBCON (S3C24X0_GPIO_BASE + 0x10)
-#define GPBDAT (S3C24X0_GPIO_BASE + 0x14)
-#define GPBUP (S3C24X0_GPIO_BASE + 0x18)
-
-#define GPCCON (S3C24X0_GPIO_BASE + 0x20)
-#define GPCDAT (S3C24X0_GPIO_BASE + 0x24)
-#define GPCUP (S3C24X0_GPIO_BASE + 0x28)
-
-#define GPDCON (S3C24X0_GPIO_BASE + 0x30)
-#define GPDDAT (S3C24X0_GPIO_BASE + 0x34)
-#define GPDUP (S3C24X0_GPIO_BASE + 0x38)
-
-#define GPECON (S3C24X0_GPIO_BASE + 0x40)
-#define GPEDAT (S3C24X0_GPIO_BASE + 0x44)
-#define GPEUP (S3C24X0_GPIO_BASE + 0x48)
-
-#define GPFCON (S3C24X0_GPIO_BASE + 0x50)
-#define GPFDAT (S3C24X0_GPIO_BASE + 0x54)
-#define GPFUP (S3C24X0_GPIO_BASE + 0x58)
-
-#define GPGCON (S3C24X0_GPIO_BASE + 0x60)
-#define GPGDAT (S3C24X0_GPIO_BASE + 0x64)
-#define GPGUP (S3C24X0_GPIO_BASE + 0x68)
-
-#define GPHCON (S3C24X0_GPIO_BASE + 0x70)
-#define GPHDAT (S3C24X0_GPIO_BASE + 0x74)
-#define GPHUP (S3C24X0_GPIO_BASE + 0x78)
-
-#ifdef CONFIG_CPU_S3C2440
-# define GPJCON (S3C24X0_GPIO_BASE + 0xd0)
-# define GPJDAT (S3C24X0_GPIO_BASE + 0xd4)
-# define GPJUP (S3C24X0_GPIO_BASE + 0xd8)
-#endif
-
-#define MISCCR  (S3C24X0_GPIO_BASE + 0x80)
-#define DCLKCON (S3C24X0_GPIO_BASE + 0x84)
-#define EXTINT0 (S3C24X0_GPIO_BASE + 0x88)
-#define EXTINT1 (S3C24X0_GPIO_BASE + 0x8c)
-#define EXTINT2 (S3C24X0_GPIO_BASE + 0x90)
-#define EINTFLT0 (S3C24X0_GPIO_BASE + 0x94)
-#define EINTFLT1 (S3C24X0_GPIO_BASE + 0x98)
-#define EINTFLT2 (S3C24X0_GPIO_BASE + 0x9c)
-#define EINTFLT3 (S3C24X0_GPIO_BASE + 0xa0)
-#define EINTMASK (S3C24X0_GPIO_BASE + 0xa4)
-#define EINTPEND (S3C24X0_GPIO_BASE + 0xa8)
-#define GSTATUS0 (S3C24X0_GPIO_BASE + 0xac)
-#define GSTATUS1 (S3C24X0_GPIO_BASE + 0xb0)
-#define GSTATUS2 (S3C24X0_GPIO_BASE + 0xb4)
-#define GSTATUS3 (S3C24X0_GPIO_BASE + 0xb8)
-#define GSTATUS4 (S3C24X0_GPIO_BASE + 0xbc)
-
-#ifdef CONFIG_CPU_S3C2440
-# define DSC0 (S3C24X0_GPIO_BASE + 0xc4)
-# define DSC1 (S3C24X0_GPIO_BASE + 0xc8)
-#endif
-- 
1.7.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for
  2011-11-26 20:22 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
@ 2011-11-28  8:11   ` Sascha Hauer
  0 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2011-11-28  8:11 UTC (permalink / raw)
  To: Juergen Beisert; +Cc: barebox

On Sat, Nov 26, 2011 at 09:22:56PM +0100, Juergen Beisert wrote:
> Most members of the S3Cxxxx family share similar timer units. But they are
> not really register compatible. To reflect this, use a separate name space for
> the S3C family.
> 
> Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
> ---
>  arch/arm/mach-samsung/include/mach/s3c-iomap.h |   20 +------------
>  arch/arm/mach-samsung/include/mach/s3c-timer.h |   36 ++++++++++++++++++++++++
>  arch/arm/mach-samsung/s3c-timer.c              |   17 ++++++-----
>  3 files changed, 46 insertions(+), 27 deletions(-)
>  create mode 100644 arch/arm/mach-samsung/include/mach/s3c-timer.h
> 

[...]

> diff --git a/arch/arm/mach-samsung/include/mach/s3c-timer.h b/arch/arm/mach-samsung/include/mach/s3c-timer.h
> new file mode 100644
> index 0000000..5201fc4
> --- /dev/null
> +++ b/arch/arm/mach-samsung/include/mach/s3c-timer.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (C) 2011 Juergen Beisert, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MACH_S3C_TIMER_H
> +# define __MACH_S3C_TIMER_H
> +
> +#define S3C_TCFG0 (S3C_TIMER_BASE + 0x00)
> +#define S3C_TCFG1 (S3C_TIMER_BASE + 0x04)
> +#define S3C_TCON (S3C_TIMER_BASE + 0x08)
> +#define S3C_TCNTB0 (S3C_TIMER_BASE + 0x0c)
> +#define S3C_TCMPB0 (S3C_TIMER_BASE + 0x10)
> +#define S3C_TCNTO0 (S3C_TIMER_BASE + 0x14)
> +#define S3C_TCNTB1 (S3C_TIMER_BASE + 0x18)
> +#define S3C_TCMPB1 (S3C_TIMER_BASE + 0x1c)
> +#define S3C_TCNTO1 (S3C_TIMER_BASE + 0x20)
> +#define S3C_TCNTB2 (S3C_TIMER_BASE + 0x24)
> +#define S3C_TCMPB2 (S3C_TIMER_BASE + 0x28)
> +#define S3C_TCNTO2 (S3C_TIMER_BASE + 0x2c)
> +#define S3C_TCNTB3 (S3C_TIMER_BASE + 0x30)
> +#define S3C_TCMPB3 (S3C_TIMER_BASE + 0x34)
> +#define S3C_TCNTO3 (S3C_TIMER_BASE + 0x38)
> +#define S3C_TCNTB4 (S3C_TIMER_BASE + 0x3c)
> +#define S3C_TCNTO4 (S3C_TIMER_BASE + 0x40)

You should rather put these into s3c-timer.c directly.

> +
> +#endif /* __MACH_S3C_TIMER_H */
> diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
> index 2b0b38a..a3ce4a2 100644
> --- a/arch/arm/mach-samsung/s3c-timer.c
> +++ b/arch/arm/mach-samsung/s3c-timer.c
> @@ -20,11 +20,12 @@
>  #include <io.h>
>  #include <mach/s3c-iomap.h>
>  #include <mach/s3c-generic.h>
> +#include <mach/s3c-timer.h>
>  
>  static uint64_t s3c24xx_clocksource_read(void)
>  {
>  	/* note: its a down counter */
> -	return 0xFFFF - readw(TCNTO4);
> +	return 0xFFFF - readw(S3C_TCNTO4);
>  }
>  
>  static struct clocksource cs = {
> @@ -37,15 +38,15 @@ static int clocksource_init(void)
>  {
>  	uint32_t p_clk = s3c_get_pclk();
>  
> -	writel(0x00000000, TCON);	/* stop all timers */
> -	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
> -	writel(0x00030000, TCFG1);	/* /16 */
> +	writel(0x00000000, S3C_TCON);	/* stop all timers */
> +	writel(0x00ffffff, S3C_TCFG0);	/* PCLK / (255 + 1) for timer 4 */
> +	writel(0x00030000, S3C_TCFG1);	/* /16 */
>  
> -	writew(0xffff, TCNTB4);		/* reload value is TOP */
> +	writew(0xffff, S3C_TCNTB4);	/* reload value is TOP */
>  
> -	writel(0x00600000, TCON);	/* force a first reload */
> -	writel(0x00400000, TCON);
> -	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
> +	writel(0x00600000, S3C_TCON);	/* force a first reload */
> +	writel(0x00400000, S3C_TCON);
> +	writel(0x00500000, S3C_TCON);	/* enable timer 4 with auto reload */
>  
>  	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
>  	init_clock(&cs);
> -- 
> 1.7.7.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for
  2012-01-02 11:43 [PATCH v2] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
@ 2012-01-02 11:43 ` Juergen Beisert
  0 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2012-01-02 11:43 UTC (permalink / raw)
  To: barebox

Most members of the S3Cxxxx family share similar timer units. But they are
not really register compatible. To reflect this, use a separate name space for
the S3C family.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/include/mach/s3c-iomap.h |   20 +-------------
 arch/arm/mach-samsung/s3c-timer.c              |   33 ++++++++++++++++++------
 2 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 7cedf6a..807660a 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -29,7 +29,7 @@
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
 #define S3C24X0_UART_BASE		0x50000000
-#define S3C24X0_TIMER_BASE		0x51000000
+#define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
 #define S3C24X0_WATCHDOG_BASE		0x53000000
 #define S3C2410_I2C_BASE		0x54000000
@@ -40,24 +40,6 @@
 #define S3C2410_SPI_BASE		0x59000000
 #define S3C2410_SDI_BASE		0x5A000000
 
-/* Timer (direct access) */
-#define TCFG0 (S3C24X0_TIMER_BASE + 0x00)
-#define TCFG1 (S3C24X0_TIMER_BASE + 0x04)
-#define TCON (S3C24X0_TIMER_BASE + 0x08)
-#define TCNTB0 (S3C24X0_TIMER_BASE + 0x0c)
-#define TCMPB0 (S3C24X0_TIMER_BASE + 0x10)
-#define TCNTO0 (S3C24X0_TIMER_BASE + 0x14)
-#define TCNTB1 (S3C24X0_TIMER_BASE + 0x18)
-#define TCMPB1 (S3C24X0_TIMER_BASE + 0x1c)
-#define TCNTO1 (S3C24X0_TIMER_BASE + 0x20)
-#define TCNTB2 (S3C24X0_TIMER_BASE + 0x24)
-#define TCMPB2 (S3C24X0_TIMER_BASE + 0x28)
-#define TCNTO2 (S3C24X0_TIMER_BASE + 0x2c)
-#define TCNTB3 (S3C24X0_TIMER_BASE + 0x30)
-#define TCMPB3 (S3C24X0_TIMER_BASE + 0x34)
-#define TCNTO3 (S3C24X0_TIMER_BASE + 0x38)
-#define TCNTB4 (S3C24X0_TIMER_BASE + 0x3c)
-#define TCNTO4 (S3C24X0_TIMER_BASE + 0x40)
 
 /* Watchdog (direct access) */
 #define WTCON (S3C24X0_WATCHDOG_BASE)
diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
index 2b0b38a..d9dae55 100644
--- a/arch/arm/mach-samsung/s3c-timer.c
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -21,10 +21,27 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
 
+#define S3C_TCFG0 (S3C_TIMER_BASE + 0x00)
+# define S3C_TCFG0_T4MASK 0xff00
+# define S3C_TCFG0_SET_PSCL234(x) ((x) << 8)
+# define S3C_TCFG0_GET_PSCL234(x) (((x) >> 8) & 0xff)
+#define S3C_TCFG1 (S3C_TIMER_BASE + 0x04)
+# define S3C_TCFG1_T4MASK 0xf0000
+# define S3C_TCFG1_SET_T4MUX(x) ((x) << 16)
+# define S3C_TCFG1_GET_T4MUX(x) (((x) >> 16) & 0xf)
+#define S3C_TCON (S3C_TIMER_BASE + 0x08)
+# define S3C_TCON_T4MASK (7 << 20)
+# define S3C_TCON_T4START (1 << 20)
+# define S3C_TCON_T4MANUALUPD (1 << 21)
+# define S3C_TCON_T4RELOAD (1 <<22)
+#define S3C_TCNTB4 (S3C_TIMER_BASE + 0x3c)
+#define S3C_TCNTO4 (S3C_TIMER_BASE + 0x40)
+
+
 static uint64_t s3c24xx_clocksource_read(void)
 {
 	/* note: its a down counter */
-	return 0xFFFF - readw(TCNTO4);
+	return 0xFFFF - readw(S3C_TCNTO4);
 }
 
 static struct clocksource cs = {
@@ -37,15 +54,15 @@ static int clocksource_init(void)
 {
 	uint32_t p_clk = s3c_get_pclk();
 
-	writel(0x00000000, TCON);	/* stop all timers */
-	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
-	writel(0x00030000, TCFG1);	/* /16 */
+	writel(0x00000000, S3C_TCON);	/* stop all timers */
+	writel(0x00ffffff, S3C_TCFG0);	/* PCLK / (255 + 1) for timer 4 */
+	writel(0x00030000, S3C_TCFG1);	/* /16 */
 
-	writew(0xffff, TCNTB4);		/* reload value is TOP */
+	writew(0xffff, S3C_TCNTB4);	/* reload value is TOP */
 
-	writel(0x00600000, TCON);	/* force a first reload */
-	writel(0x00400000, TCON);
-	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
+	writel(0x00600000, S3C_TCON);	/* force a first reload */
+	writel(0x00400000, S3C_TCON);
+	writel(0x00500000, S3C_TCON);	/* enable timer 4 with auto reload */
 
 	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
 	init_clock(&cs);
-- 
1.7.7.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for
  2011-12-25 20:38 [PATCH] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
@ 2011-12-25 20:38 ` Juergen Beisert
  0 siblings, 0 replies; 18+ messages in thread
From: Juergen Beisert @ 2011-12-25 20:38 UTC (permalink / raw)
  To: barebox

Most members of the S3Cxxxx family share similar timer units. But they are
not really register compatible. To reflect this, use a separate name space for
the S3C family.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/include/mach/s3c-iomap.h |   20 +-------------
 arch/arm/mach-samsung/s3c-timer.c              |   33 ++++++++++++++++++------
 2 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 7cedf6a..807660a 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -29,7 +29,7 @@
 #define S3C2410_LCD_BASE		0x4D000000
 #define S3C24X0_NAND_BASE		0x4E000000
 #define S3C24X0_UART_BASE		0x50000000
-#define S3C24X0_TIMER_BASE		0x51000000
+#define S3C_TIMER_BASE			0x51000000
 #define S3C2410_USB_DEVICE_BASE		0x52000140
 #define S3C24X0_WATCHDOG_BASE		0x53000000
 #define S3C2410_I2C_BASE		0x54000000
@@ -40,24 +40,6 @@
 #define S3C2410_SPI_BASE		0x59000000
 #define S3C2410_SDI_BASE		0x5A000000
 
-/* Timer (direct access) */
-#define TCFG0 (S3C24X0_TIMER_BASE + 0x00)
-#define TCFG1 (S3C24X0_TIMER_BASE + 0x04)
-#define TCON (S3C24X0_TIMER_BASE + 0x08)
-#define TCNTB0 (S3C24X0_TIMER_BASE + 0x0c)
-#define TCMPB0 (S3C24X0_TIMER_BASE + 0x10)
-#define TCNTO0 (S3C24X0_TIMER_BASE + 0x14)
-#define TCNTB1 (S3C24X0_TIMER_BASE + 0x18)
-#define TCMPB1 (S3C24X0_TIMER_BASE + 0x1c)
-#define TCNTO1 (S3C24X0_TIMER_BASE + 0x20)
-#define TCNTB2 (S3C24X0_TIMER_BASE + 0x24)
-#define TCMPB2 (S3C24X0_TIMER_BASE + 0x28)
-#define TCNTO2 (S3C24X0_TIMER_BASE + 0x2c)
-#define TCNTB3 (S3C24X0_TIMER_BASE + 0x30)
-#define TCMPB3 (S3C24X0_TIMER_BASE + 0x34)
-#define TCNTO3 (S3C24X0_TIMER_BASE + 0x38)
-#define TCNTB4 (S3C24X0_TIMER_BASE + 0x3c)
-#define TCNTO4 (S3C24X0_TIMER_BASE + 0x40)
 
 /* Watchdog (direct access) */
 #define WTCON (S3C24X0_WATCHDOG_BASE)
diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
index 2b0b38a..d9dae55 100644
--- a/arch/arm/mach-samsung/s3c-timer.c
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -21,10 +21,27 @@
 #include <mach/s3c-iomap.h>
 #include <mach/s3c-generic.h>
 
+#define S3C_TCFG0 (S3C_TIMER_BASE + 0x00)
+# define S3C_TCFG0_T4MASK 0xff00
+# define S3C_TCFG0_SET_PSCL234(x) ((x) << 8)
+# define S3C_TCFG0_GET_PSCL234(x) (((x) >> 8) & 0xff)
+#define S3C_TCFG1 (S3C_TIMER_BASE + 0x04)
+# define S3C_TCFG1_T4MASK 0xf0000
+# define S3C_TCFG1_SET_T4MUX(x) ((x) << 16)
+# define S3C_TCFG1_GET_T4MUX(x) (((x) >> 16) & 0xf)
+#define S3C_TCON (S3C_TIMER_BASE + 0x08)
+# define S3C_TCON_T4MASK (7 << 20)
+# define S3C_TCON_T4START (1 << 20)
+# define S3C_TCON_T4MANUALUPD (1 << 21)
+# define S3C_TCON_T4RELOAD (1 <<22)
+#define S3C_TCNTB4 (S3C_TIMER_BASE + 0x3c)
+#define S3C_TCNTO4 (S3C_TIMER_BASE + 0x40)
+
+
 static uint64_t s3c24xx_clocksource_read(void)
 {
 	/* note: its a down counter */
-	return 0xFFFF - readw(TCNTO4);
+	return 0xFFFF - readw(S3C_TCNTO4);
 }
 
 static struct clocksource cs = {
@@ -37,15 +54,15 @@ static int clocksource_init(void)
 {
 	uint32_t p_clk = s3c_get_pclk();
 
-	writel(0x00000000, TCON);	/* stop all timers */
-	writel(0x00ffffff, TCFG0);	/* PCLK / (255 + 1) for timer 4 */
-	writel(0x00030000, TCFG1);	/* /16 */
+	writel(0x00000000, S3C_TCON);	/* stop all timers */
+	writel(0x00ffffff, S3C_TCFG0);	/* PCLK / (255 + 1) for timer 4 */
+	writel(0x00030000, S3C_TCFG1);	/* /16 */
 
-	writew(0xffff, TCNTB4);		/* reload value is TOP */
+	writew(0xffff, S3C_TCNTB4);	/* reload value is TOP */
 
-	writel(0x00600000, TCON);	/* force a first reload */
-	writel(0x00400000, TCON);
-	writel(0x00500000, TCON);	/* enable timer 4 with auto reload */
+	writel(0x00600000, S3C_TCON);	/* force a first reload */
+	writel(0x00400000, S3C_TCON);
+	writel(0x00500000, S3C_TCON);	/* enable timer 4 with auto reload */
 
 	cs.mult = clocksource_hz2mult(p_clk / ((255 + 1) * 16), cs.shift);
 	init_clock(&cs);
-- 
1.7.7.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2012-01-02 11:44 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2011-11-26 20:22 ` [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future Juergen Beisert
2011-11-26 20:22 ` [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally Juergen Beisert
2011-11-26 20:22 ` [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates Juergen Beisert
2011-11-26 20:22 ` [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect driver's usage Juergen Beisert
2011-11-26 20:22 ` [PATCH 05/14] MACH SAMSUNG/S3C: The SDHC driver can be shared in the S3C CPU family Juergen Beisert
2011-11-26 20:22 ` [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for Juergen Beisert
2011-11-26 20:22 ` [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management Juergen Beisert
2011-11-26 20:22 ` [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family Juergen Beisert
2011-11-26 20:22 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
2011-11-28  8:11   ` Sascha Hauer
2011-11-26 20:22 ` [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver Juergen Beisert
2011-11-26 20:22 ` [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family Juergen Beisert
2011-11-26 20:22 ` [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs Juergen Beisert
2011-11-26 20:23 ` [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling Juergen Beisert
2011-11-26 20:23 ` [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs Juergen Beisert
2011-12-25 20:38 [PATCH] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2011-12-25 20:38 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
2012-01-02 11:43 [PATCH v2] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2012-01-02 11:43 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox