[PATCH v2 1/7] storage/usb.c: fix test_unit_ready

[PATCH v2 1/7] storage/usb.c: fix test_unit_ready

[Michael Grzeschik]

This is needed for the ohci-at91 to work.

In u-boot this function was transmitting a cmdlen of 12, by the initial
commit. There are similar functions like usb_request_sense,
usb_read_capacity nearby which also transmit 12 byte per default on
u-boot, which probably also need a fix.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 drivers/usb/storage/usb.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index ef07c54..865ba8e 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -96,8 +96,8 @@ static int usb_stor_test_unit_ready(ccb *srb, struct us_data *us)
 	retries = 10;
 	do {
 		US_DEBUGP("SCSI_TST_U_RDY\n");
-		memset(&srb->cmd[0], 0, 6);
-		srb->cmdlen = 6;
+		memset(&srb->cmd[0], 0, 12);
+		srb->cmdlen = 12;
 		srb->cmd[0] = SCSI_TST_U_RDY;
 		srb->datalen = 0;
 		result = us->transport(srb, us);
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 2/7] atmel_mci: check for device id we use to address the right slot

[Michael Grzeschik]

We have to check which sd card slot we use. The registered mmc_id is the
the correct parameter for this.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
- removed if condition and always write the hw_dev->id instead

 drivers/mci/atmel_mci.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 4a29cad..15668fc 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -369,6 +369,8 @@ static void mci_set_ios(struct mci_host *mci, struct device_d *mci_dev,
 		atmel_mci_writel(host, AT91_MCI_SDCR, AT91_MCI_SDCBUS_1BIT);
 		break;
 	}
+	atmel_mci_writel(host, AT91_MCI_SDCR, atmel_mci_readl(host, AT91_MCI_SDCR)
+		| host->hw_dev->id);
 
 	if (clock) {
 		atmel_set_clk_rate(host, clock);
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/7] at91sam9260_devices: properly set slot id

[Michael Grzeschik]

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/mach-at91/at91sam9260_devices.c |   34 +++++++++++++++++++++--------
 1 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 9d1acda..177f770 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -261,18 +261,32 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
 	/* CLK */
 	at91_set_A_periph(AT91_PIN_PA8, 0);
 
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA7, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA6, 1);
-	if (data->bus_width == 4) {
-		at91_set_A_periph(AT91_PIN_PA9, 1);
-		at91_set_A_periph(AT91_PIN_PA10, 1);
-		at91_set_A_periph(AT91_PIN_PA11, 1);
+
+	if (mmc_id == 0) {
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA7, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA6, 1);
+		if (data->bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA9, 1);
+			at91_set_A_periph(AT91_PIN_PA10, 1);
+			at91_set_A_periph(AT91_PIN_PA11, 1);
+		}
+	} else if (mmc_id == 1) {
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA3, 1);
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+		}
 	}
 
-	dev = add_generic_device("atmel_mci", 0, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
+	dev = add_generic_device("atmel_mci", mmc_id, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
 			   IORESOURCE_MEM, data);
 }
 #else
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth

[Michael Grzeschik]

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/mach-at91/at91sam9260_devices.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 177f770..be1fdd9 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -63,8 +63,13 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
 		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
 		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
 		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
+		if (data->flags & AT91SAM_ETX2_ETX3_ALTERNATIVE) {
+			at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
+			at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
+		} else {
+			at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
+			at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
+		}
 		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
 	}
 
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: *** PROBABLY SPAM *** [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth

[Jean-Christophe PLAGNIOL-VILLARD]

On 12:28 Fri 09 Dec     , Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
>  arch/arm/mach-at91/at91sam9260_devices.c |    9 +++++++--
please update all soc
>  1 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
> index 177f770..be1fdd9 100644
> --- a/arch/arm/mach-at91/at91sam9260_devices.c
> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
> @@ -63,8 +63,13 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
>  		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
>  		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
>  		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
> -		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
> -		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
> +		if (data->flags & AT91SAM_ETX2_ETX3_ALTERNATIVE) {
I really don't like the idea to propagate pin configuration to the drivers
this show stay at board or soc config level

I prefer to add a new parameter than use a flag use by the driver
please make this more generic alt_config1 as this will what is going to be use
by the pinctrl on at91

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: *** PROBABLY SPAM *** [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth

[Sascha Hauer]

On Fri, Dec 09, 2011 at 03:56:01PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:28 Fri 09 Dec     , Michael Grzeschik wrote:
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > ---
> >  arch/arm/mach-at91/at91sam9260_devices.c |    9 +++++++--
> please update all soc
> >  1 files changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
> > index 177f770..be1fdd9 100644
> > --- a/arch/arm/mach-at91/at91sam9260_devices.c
> > +++ b/arch/arm/mach-at91/at91sam9260_devices.c
> > @@ -63,8 +63,13 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
> >  		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
> >  		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
> >  		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
> > -		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
> > -		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
> > +		if (data->flags & AT91SAM_ETX2_ETX3_ALTERNATIVE) {
> I really don't like the idea to propagate pin configuration to the drivers
> this show stay at board or soc config level

The same is already done with RMII:

	if (!(data->flags & AT91SAM_ETHER_RMII)) {
		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
		...


> 
> I prefer to add a new parameter than use a flag use by the driver

-ENOPARSE

A new parameter to what? at91_add_device_eth?
The driver itself does not use this flag.

> please make this more generic alt_config1 as this will what is going to be use
> by the pinctrl on at91

Sorry, don't know what you mean.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 5/7] arm: update mach-types

[Michael Grzeschik]

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/tools/mach-types |  473 +++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 460 insertions(+), 13 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 35acbf0..d593026 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Mar 30 09:36:58 2011
+# Last update: Tue Dec 6 15:54:16 2011
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1319,6 +1319,7 @@ mistral			MACH_MISTRAL		MISTRAL			1315
 msm			MACH_MSM		MSM			1316
 ct5910			MACH_CT5910		CT5910			1317
 ct5912			MACH_CT5912		CT5912			1318
+argonst_mp		MACH_HYNET_INE		HYNET_INE		1319
 hynet_app		MACH_HYNET_APP		HYNET_APP		1320
 msm7200			MACH_MSM7200		MSM7200			1321
 msm7600			MACH_MSM7600		MSM7600			1322
@@ -1557,7 +1558,7 @@ otter			MACH_OTTER		OTTER			1561
 davinci_ldk		MACH_DAVINCI_LDK	DAVINCI_LDK		1562
 phreedom		MACH_PHREEDOM		PHREEDOM		1563
 sg310			MACH_SG310		SG310			1564
-ts_x09			MACH_TS209		TS209			1565
+ts209			MACH_TS209		TS209			1565
 at91cap9adk		MACH_AT91CAP9ADK	AT91CAP9ADK		1566
 tion9315		MACH_TION9315		TION9315		1567
 mast			MACH_MAST		MAST			1568
@@ -1960,7 +1961,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_EUKREA_CPUIMX27	EUKREA_CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2554,6 +2555,7 @@ magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		2573
 emxx			MACH_EMXX		EMXX			2574
 outlaw			MACH_OUTLAW		OUTLAW			2575
 riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
+riot_gx2		MACH_RIOT_VOX		RIOT_VOX		2577
 riot_x37		MACH_RIOT_X37		RIOT_X37		2578
 mega25mx		MACH_MEGA25MX		MEGA25MX		2579
 benzina2		MACH_BENZINA2		BENZINA2		2580
@@ -2567,7 +2569,7 @@ p3600			MACH_P3600		P3600			2587
 dlt2			MACH_DLT2		DLT2			2588
 df3120			MACH_DF3120		DF3120			2589
 ecucore_9g20		MACH_ECUCORE_9G20	ECUCORE_9G20		2590
-nautel_lpc3240		MACH_NAUTEL_LPC3240	NAUTEL_LPC3240		2591
+nautel_am35xx		MACH_NAUTEL_LPC3240	NAUTEL_LPC3240		2591
 glacier			MACH_GLACIER		GLACIER			2592
 phrazer_bulldog		MACH_PHRAZER_BULLDOG	PHRAZER_BULLDOG		2593
 omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
@@ -2599,7 +2601,7 @@ fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-gplugd			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_GPLUGD		GPLUGD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2652,7 +2654,7 @@ htcpanther_cdma		MACH_HTCPANTHER_CDMA	HTCPANTHER_CDMA		2674
 reb01			MACH_REB01		REB01			2675
 aquila			MACH_AQUILA		AQUILA			2676
 spark_sls_hw2		MACH_SPARK_SLS_HW2	SPARK_SLS_HW2		2677
-sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
+esata_sheevaplug	MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
 msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
 micro2440		MACH_MICRO2440		MICRO2440		2680
 am2440			MACH_AM2440		AM2440			2681
@@ -2724,7 +2726,7 @@ vpnext_mpu		MACH_VPNEXT_MPU		VPNEXT_MPU		2747
 bcmring_tablet_v1	MACH_BCMRING_TABLET_V1	BCMRING_TABLET_V1	2748
 sgarm10			MACH_SGARM10		SGARM10			2749
 cm_t3517		MACH_CM_T3517		CM_T3517		2750
-omap3_cps		MACH_OMAP3_CPS		OMAP3_CPS		2751
+dig297			MACH_OMAP3_CPS		OMAP3_CPS		2751
 axar1500_receiver	MACH_AXAR1500_RECEIVER	AXAR1500_RECEIVER	2752
 wbd222			MACH_WBD222		WBD222			2753
 mt65xx			MACH_MT65XX		MT65XX			2754
@@ -2748,6 +2750,7 @@ oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
 kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
 ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
 cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
+lpc_evo			MACH_LPC2		LPC2			2777
 olympus			MACH_OLYMPUS		OLYMPUS			2778
 vortex			MACH_VORTEX		VORTEX			2779
 s5pc200			MACH_S5PC200		S5PC200			2780
@@ -2789,8 +2792,8 @@ teton_bga		MACH_TETON_BGA		TETON_BGA		2816
 snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
 tam3517			MACH_TAM3517		TAM3517			2818
 pdc100			MACH_PDC100		PDC100			2819
-eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
-eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25SD	EUKREA_CPUIMX25SD	2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
 p565			MACH_P565		P565			2824
@@ -3018,6 +3021,7 @@ s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
 controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
 tin307			MACH_TIN307		TIN307			3054
 tin510			MACH_TIN510		TIN510			3055
+ep3505			MACH_EP3517		EP3517			3056
 bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
 tem3x30			MACH_TEM3X30		TEM3X30			3058
 harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
@@ -3236,7 +3240,7 @@ omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
 uemd			MACH_UEMD		UEMD			3281
 ccwmx51mut		MACH_CCWMX51MUT		CCWMX51MUT		3282
 rockhopper		MACH_ROCKHOPPER		ROCKHOPPER		3283
-nookcolor		MACH_NOOKCOLOR		NOOKCOLOR		3284
+encore			MACH_ENCORE		ENCORE			3284
 hkdkc100		MACH_HKDKC100		HKDKC100		3285
 ts42xx			MACH_TS42XX		TS42XX			3286
 aebl			MACH_AEBL		AEBL			3287
@@ -3247,9 +3251,9 @@ isc3			MACH_ISC3		ISC3			3291
 rascal			MACH_RASCAL		RASCAL			3292
 hrefv60			MACH_HREFV60		HREFV60			3293
 tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
-pyramid_td		MACH_PYRAMID_TD		PYRAMID_TD		3295
+pydtd			MACH_PYRAMID_TD		PYRAMID_TD		3295
 splendor		MACH_SPLENDOR		SPLENDOR		3296
-guf_planet		MACH_GUF_PLANET		GUF_PLANET		3297
+guf_vincell		MACH_GUF_PLANET		GUF_PLANET		3297
 msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
 htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
 athene			MACH_ATHENE		ATHENE			3300
@@ -3348,7 +3352,7 @@ geneva_b5		MACH_GENEVA_B5		GENEVA_B5		3393
 spear1340		MACH_SPEAR1340		SPEAR1340		3394
 rexmas			MACH_REXMAS		REXMAS			3395
 msm8960_cdp		MACH_MSM8960_CDP	MSM8960_CDP		3396
-msm8960_mdp		MACH_MSM8960_MDP	MSM8960_MDP		3397
+msm8960_mtp		MACH_MSM8960_MDP	MSM8960_MDP		3397
 msm8960_fluid		MACH_MSM8960_FLUID	MSM8960_FLUID		3398
 msm8960_apq		MACH_MSM8960_APQ	MSM8960_APQ		3399
 helios_v2		MACH_HELIOS_V2		HELIOS_V2		3400
@@ -3396,3 +3400,446 @@ nuc740evb		MACH_NUC740EVB		NUC740EVB		3441
 nuc745evb		MACH_NUC745EVB		NUC745EVB		3442
 transcede		MACH_TRANSCEDE		TRANSCEDE		3443
 mora			MACH_MORA		MORA			3444
+nda_evm			MACH_NDA_EVM		NDA_EVM			3445
+timu			MACH_TIMU		TIMU			3446
+expressh		MACH_EXPRESSH		EXPRESSH		3447
+veridis_a300		MACH_VERIDIS_A300	VERIDIS_A300		3448
+dm368_leopard		MACH_DM368_LEOPARD	DM368_LEOPARD		3449
+omap_mcop		MACH_OMAP_MCOP		OMAP_MCOP		3450
+tritip			MACH_TRITIP		TRITIP			3451
+sm1k			MACH_SM1K		SM1K			3452
+monch			MACH_MONCH		MONCH			3453
+curacao			MACH_CURACAO		CURACAO			3454
+origen			MACH_ORIGEN		ORIGEN			3455
+epc10			MACH_EPC10		EPC10			3456
+sgh_i740		MACH_SGH_I740		SGH_I740		3457
+tuna			MACH_TUNA		TUNA			3458
+mx51_tulip		MACH_MX51_TULIP		MX51_TULIP		3459
+mx51_aster7		MACH_MX51_ASTER7	MX51_ASTER7		3460
+acro37xbrd		MACH_ACRO37XBRD		ACRO37XBRD		3461
+elke			MACH_ELKE		ELKE			3462
+sbc6000x		MACH_SBC6000X		SBC6000X		3463
+r1801e			MACH_R1801E		R1801E			3464
+h1600			MACH_H1600		H1600			3465
+mini210			MACH_MINI210		MINI210			3466
+mini8168		MACH_MINI8168		MINI8168		3467
+pc7308			MACH_PC7308		PC7308			3468
+ge863pro3		MACH_GE863		GE863			3469
+kmm2m01			MACH_KMM2M01		KMM2M01			3470
+mx51erebus		MACH_MX51EREBUS		MX51EREBUS		3471
+wm8650refboard		MACH_WM8650REFBOARD	WM8650REFBOARD		3472
+tuxrail			MACH_TUXRAIL		TUXRAIL			3473
+arthur			MACH_ARTHUR		ARTHUR			3474
+doorboy			MACH_DOORBOY		DOORBOY			3475
+xarina			MACH_XARINA		XARINA			3476
+roverx7			MACH_ROVERX7		ROVERX7			3477
+sdvr			MACH_SDVR		SDVR			3478
+acer_maya		MACH_ACER_MAYA		ACER_MAYA		3479
+pico			MACH_PICO		PICO			3480
+cwmx233			MACH_CWMX233		CWMX233			3481
+cwam1808		MACH_CWAM1808		CWAM1808		3482
+cwdm365			MACH_CWDM365		CWDM365			3483
+mx51_moray		MACH_MX51_MORAY		MX51_MORAY		3484
+thales_cbc		MACH_THALES_CBC		THALES_CBC		3485
+bluepoint		MACH_BLUEPOINT		BLUEPOINT		3486
+dir665			MACH_DIR665		DIR665			3487
+acmerover1		MACH_ACMEROVER1		ACMEROVER1		3488
+shooter_ct		MACH_SHOOTER_CT		SHOOTER_CT		3489
+bliss			MACH_BLISS		BLISS			3490
+blissc			MACH_BLISSC		BLISSC			3491
+thales_adc		MACH_THALES_ADC		THALES_ADC		3492
+ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
+atdgp318		MACH_ATDGP318		ATDGP318		3494
+dma210u			MACH_DMA210U		DMA210U			3495
+em_t3			MACH_EM_T3		EM_T3			3496
+htx3250			MACH_HTX3250		HTX3250			3497
+g50			MACH_G50		G50			3498
+eco5			MACH_ECO5		ECO5			3499
+wintergrasp		MACH_WINTERGRASP	WINTERGRASP		3500
+puro			MACH_PURO		PURO			3501
+shooter_k		MACH_SHOOTER_K		SHOOTER_K		3502
+nspire			MACH_NSPIRE		NSPIRE			3503
+mickxx			MACH_MICKXX		MICKXX			3504
+lxmb			MACH_LXMB		LXMB			3505
+tmdxscbp6618x		MACH_TMDXSCBP6616X	TMDXSCBP6616X		3506
+adam			MACH_ADAM		ADAM			3507
+b1004			MACH_B1004		B1004			3508
+oboea			MACH_OBOEA		OBOEA			3509
+a1015			MACH_A1015		A1015			3510
+robin_vbdt30		MACH_ROBIN_VBDT30	ROBIN_VBDT30		3511
+tegra_enterprise	MACH_TEGRA_ENTERPRISE	TEGRA_ENTERPRISE	3512
+rfl108200_mk10		MACH_RFL108200_MK10	RFL108200_MK10		3513
+rfl108300_mk16		MACH_RFL108300_MK16	RFL108300_MK16		3514
+rover_v7		MACH_ROVER_V7		ROVER_V7		3515
+miphone			MACH_MIPHONE		MIPHONE			3516
+femtobts		MACH_FEMTOBTS		FEMTOBTS		3517
+monopoli		MACH_MONOPOLI		MONOPOLI		3518
+boss			MACH_BOSS		BOSS			3519
+davinci_dm368_vtam	MACH_DAVINCI_DM368_VTAM	DAVINCI_DM368_VTAM	3520
+clcon			MACH_CLCON		CLCON			3521
+nokia_rm696		MACH_NOKIA_RM696	NOKIA_RM696		3522
+tahiti			MACH_TAHITI		TAHITI			3523
+fighter			MACH_FIGHTER		FIGHTER			3524
+sgh_i710		MACH_SGH_I710		SGH_I710		3525
+integreproscb		MACH_INTEGREPROSCB	INTEGREPROSCB		3526
+monza			MACH_MONZA		MONZA			3527
+calimain		MACH_CALIMAIN		CALIMAIN		3528
+mx6q_sabreauto		MACH_MX6Q_SABREAUTO	MX6Q_SABREAUTO		3529
+gma01x			MACH_GMA01X		GMA01X			3530
+sbc51			MACH_SBC51		SBC51			3531
+fit			MACH_FIT		FIT			3532
+steelhead		MACH_STEELHEAD		STEELHEAD		3533
+panther			MACH_PANTHER		PANTHER			3534
+msm8960_liquid		MACH_MSM8960_LIQUID	MSM8960_LIQUID		3535
+lexikonct		MACH_LEXIKONCT		LEXIKONCT		3536
+ns2816_stb		MACH_NS2816_STB		NS2816_STB		3537
+sei_mm2_lpc3250		MACH_SEI_MM2_LPC3250	SEI_MM2_LPC3250		3538
+cmimx53			MACH_CMIMX53		CMIMX53			3539
+sandwich		MACH_SANDWICH		SANDWICH		3540
+chief			MACH_CHIEF		CHIEF			3541
+pogo_e02		MACH_POGO_E02		POGO_E02		3542
+mikrap_x168		MACH_MIKRAP_X168	MIKRAP_X168		3543
+htcmozart		MACH_HTCMOZART		HTCMOZART		3544
+htcgold			MACH_HTCGOLD		HTCGOLD			3545
+mt72xx			MACH_MT72XX		MT72XX			3546
+mx51_ivy		MACH_MX51_IVY		MX51_IVY		3547
+mx51_lvd		MACH_MX51_LVD		MX51_LVD		3548
+omap3_wiser2		MACH_OMAP3_WISER2	OMAP3_WISER2		3549
+dreamplug		MACH_DREAMPLUG		DREAMPLUG		3550
+cobas_c_111		MACH_COBAS_C_111	COBAS_C_111		3551
+cobas_u_411		MACH_COBAS_U_411	COBAS_U_411		3552
+hssd			MACH_HSSD		HSSD			3553
+iom35x			MACH_IOM35X		IOM35X			3554
+psom_omap		MACH_PSOM_OMAP		PSOM_OMAP		3555
+iphone_2g		MACH_IPHONE_2G		IPHONE_2G		3556
+iphone_3g		MACH_IPHONE_3G		IPHONE_3G		3557
+ipod_touch_1g		MACH_IPOD_TOUCH_1G	IPOD_TOUCH_1G		3558
+pharos_tpc		MACH_PHAROS_TPC		PHAROS_TPC		3559
+mx53_hydra		MACH_MX53_HYDRA		MX53_HYDRA		3560
+ns2816_dev_board	MACH_NS2816_DEV_BOARD	NS2816_DEV_BOARD	3561
+iphone_3gs		MACH_IPHONE_3GS		IPHONE_3GS		3562
+iphone_4		MACH_IPHONE_4		IPHONE_4		3563
+ipod_touch_4g		MACH_IPOD_TOUCH_4G	IPOD_TOUCH_4G		3564
+dragon_e1100		MACH_DRAGON_E1100	DRAGON_E1100		3565
+topside			MACH_TOPSIDE		TOPSIDE			3566
+irisiii			MACH_IRISIII		IRISIII			3567
+deto_macarm9		MACH_DETO_MACARM9	DETO_MACARM9		3568
+eti_d1			MACH_ETI_D1		ETI_D1			3569
+som3530sdk		MACH_SOM3530SDK		SOM3530SDK		3570
+oc_engine		MACH_OC_ENGINE		OC_ENGINE		3571
+apq8064_sim		MACH_APQ8064_SIM	APQ8064_SIM		3572
+alps			MACH_ALPS		ALPS			3575
+tny_t3730		MACH_TNY_T3730		TNY_T3730		3576
+geryon_nfe		MACH_GERYON_NFE		GERYON_NFE		3577
+ns2816_ref_board	MACH_NS2816_REF_BOARD	NS2816_REF_BOARD	3578
+silverstone		MACH_SILVERSTONE	SILVERSTONE		3579
+mtt2440			MACH_MTT2440		MTT2440			3580
+ynicdb			MACH_YNICDB		YNICDB			3581
+bct			MACH_BCT		BCT			3582
+tuscan			MACH_TUSCAN		TUSCAN			3583
+xbt_sam9g45		MACH_XBT_SAM9G45	XBT_SAM9G45		3584
+enbw_cmc		MACH_ENBW_CMC		ENBW_CMC		3585
+msm8x60_dragon		MACH_APQ8060_DRAGON	APQ8060_DRAGON		3586
+ch104mx257		MACH_CH104MX257		CH104MX257		3587
+openpri			MACH_OPENPRI		OPENPRI			3588
+am335xevm		MACH_AM335XEVM		AM335XEVM		3589
+picodmb			MACH_PICODMB		PICODMB			3590
+waluigi			MACH_WALUIGI		WALUIGI			3591
+punicag7		MACH_PUNICAG7		PUNICAG7		3592
+ipad_1g			MACH_IPAD_1G		IPAD_1G			3593
+appletv_2g		MACH_APPLETV_2G		APPLETV_2G		3594
+mach_ecog45		MACH_MACH_ECOG45	MACH_ECOG45		3595
+ait_cam_enc_4xx		MACH_AIT_CAM_ENC_4XX	AIT_CAM_ENC_4XX		3596
+runnymede		MACH_RUNNYMEDE		RUNNYMEDE		3597
+play			MACH_PLAY		PLAY			3598
+hw90260			MACH_HW90260		HW90260			3599
+tagh			MACH_TAGH		TAGH			3600
+filbert			MACH_FILBERT		FILBERT			3601
+getinge_netcomv3	MACH_GETINGE_NETCOMV3	GETINGE_NETCOMV3	3602
+cw20			MACH_CW20		CW20			3603
+cinema			MACH_CINEMA		CINEMA			3604
+cinema_tea		MACH_CINEMA_TEA		CINEMA_TEA		3605
+cinema_coffee		MACH_CINEMA_COFFEE	CINEMA_COFFEE		3606
+cinema_juice		MACH_CINEMA_JUICE	CINEMA_JUICE		3607
+linux_pad		MACH_THEPAD		THEPAD			3608
+mx53_mirage2		MACH_MX53_MIRAGE2	MX53_MIRAGE2		3609
+mx53_efikasb		MACH_MX53_EFIKASB	MX53_EFIKASB		3610
+stm_b2000		MACH_STM_B2000		STM_B2000		3612
+m28evk			MACH_M28EVK		M28EVK			3613
+pda			MACH_PDA		PDA			3614
+meraki_mr58		MACH_MERAKI_MR58	MERAKI_MR58		3615
+kota2			MACH_KOTA2		KOTA2			3616
+letcool			MACH_LETCOOL		LETCOOL			3617
+mx27iat			MACH_MX27IAT		MX27IAT			3618
+apollo_td		MACH_APOLLO_TD		APOLLO_TD		3619
+arena			MACH_ARENA		ARENA			3620
+gsngateway		MACH_GSNGATEWAY		GSNGATEWAY		3621
+lf2000			MACH_LF2000		LF2000			3622
+bonito			MACH_BONITO		BONITO			3623
+asymptote		MACH_ASYMPTOTE		ASYMPTOTE		3624
+bst2brd			MACH_BST2BRD		BST2BRD			3625
+tx335s			MACH_TX335S		TX335S			3626
+pelco_tesla		MACH_PELCO_TESLA	PELCO_TESLA		3627
+rrhtestplat		MACH_RRHTESTPLAT	RRHTESTPLAT		3628
+vidtonic_pro		MACH_VIDTONIC_PRO	VIDTONIC_PRO		3629
+pl_apollo		MACH_PL_APOLLO		PL_APOLLO		3630
+pl_phoenix		MACH_PL_PHOENIX		PL_PHOENIX		3631
+m28cu3			MACH_M28CU3		M28CU3			3632
+vvbox_hd		MACH_VVBOX_HD		VVBOX_HD		3633
+coreware_sam9260_	MACH_COREWARE_SAM9260_	COREWARE_SAM9260_	3634
+marmaduke		MACH_MARMADUKE		MARMADUKE		3635
+amg_xlcore_camera	MACH_AMG_XLCORE_CAMERA	AMG_XLCORE_CAMERA	3636
+omap3_egf		MACH_OMAP3_EGF		OMAP3_EGF		3637
+smdk4212		MACH_SMDK4212		SMDK4212		3638
+dnp9200			MACH_DNP9200		DNP9200			3639
+tf101			MACH_TF101		TF101			3640
+omap3silvio		MACH_OMAP3SILVIO	OMAP3SILVIO		3641
+picasso2		MACH_PICASSO2		PICASSO2		3642
+vangogh2		MACH_VANGOGH2		VANGOGH2		3643
+olpc_xo_1_75		MACH_OLPC_XO_1_75	OLPC_XO_1_75		3644
+gx400			MACH_GX400		GX400			3645
+gs300			MACH_GS300		GS300			3646
+acer_a9			MACH_ACER_A9		ACER_A9			3647
+vivow_evm		MACH_VIVOW_EVM		VIVOW_EVM		3648
+veloce_cxq		MACH_VELOCE_CXQ		VELOCE_CXQ		3649
+veloce_cxm		MACH_VELOCE_CXM		VELOCE_CXM		3650
+p1852			MACH_P1852		P1852			3651
+naxy100			MACH_NAXY100		NAXY100			3652
+taishan			MACH_TAISHAN		TAISHAN			3653
+touchlink		MACH_TOUCHLINK		TOUCHLINK		3654
+stm32f103ze		MACH_STM32F103ZE	STM32F103ZE		3655
+mcx			MACH_MCX		MCX			3656
+stm_nmhdk_fli7610	MACH_STM_NMHDK_FLI7610	STM_NMHDK_FLI7610	3657
+top28x			MACH_TOP28X		TOP28X			3658
+okl4vp_microvisor	MACH_OKL4VP_MICROVISOR	OKL4VP_MICROVISOR	3659
+pop			MACH_POP		POP			3660
+layer			MACH_LAYER		LAYER			3661
+trondheim		MACH_TRONDHEIM		TRONDHEIM		3662
+eva			MACH_EVA		EVA			3663
+trust_taurus		MACH_TRUST_TAURUS	TRUST_TAURUS		3664
+ns2816_huashan		MACH_NS2816_HUASHAN	NS2816_HUASHAN		3665
+ns2816_yangcheng	MACH_NS2816_YANGCHENG	NS2816_YANGCHENG	3666
+p852			MACH_P852		P852			3667
+flea3			MACH_FLEA3		FLEA3			3668
+bowfin			MACH_BOWFIN		BOWFIN			3669
+mv88de3100		MACH_MV88DE3100		MV88DE3100		3670
+pia_am35x		MACH_PIA_AM35X		PIA_AM35X		3671
+cedar			MACH_CEDAR		CEDAR			3672
+picasso_e		MACH_PICASSO_E		PICASSO_E		3673
+samsung_e60		MACH_SAMSUNG_E60	SAMSUNG_E60		3674
+msm9615_cdp		MACH_MDM9615		MDM9615			3675
+sdvr_mini		MACH_SDVR_MINI		SDVR_MINI		3676
+omap3_ij3k		MACH_OMAP3_IJ3K		OMAP3_IJ3K		3677
+modasmc1		MACH_MODASMC1		MODASMC1		3678
+apq8064_rumi3		MACH_APQ8064_RUMI3	APQ8064_RUMI3		3679
+matrix506		MACH_MATRIX506		MATRIX506		3680
+msm9615_mtp		MACH_MSM9615_MTP	MSM9615_MTP		3681
+dm36x_spawndc		MACH_DM36X_SPAWNDC	DM36X_SPAWNDC		3682
+sff792			MACH_SFF792		SFF792			3683
+am335xiaevm		MACH_AM335XIAEVM	AM335XIAEVM		3684
+g3c2440			MACH_G3C2440		G3C2440			3685
+tion270			MACH_TION270		TION270			3686
+w22q7arm02		MACH_W22Q7ARM02		W22Q7ARM02		3687
+omap_cat		MACH_OMAP_CAT		OMAP_CAT		3688
+at91sam9n12ek		MACH_AT91SAM9N12EK	AT91SAM9N12EK		3689
+morrison		MACH_MORRISON		MORRISON		3690
+svdu			MACH_SVDU		SVDU			3691
+lpp01			MACH_LPP01		LPP01			3692
+ubc283			MACH_UBC283		UBC283			3693
+zeppelin		MACH_ZEPPELIN		ZEPPELIN		3694
+motus			MACH_MOTUS		MOTUS			3695
+neomainboard		MACH_NEOMAINBOARD	NEOMAINBOARD		3696
+devkit3250		MACH_DEVKIT3250		DEVKIT3250		3697
+devkit7000		MACH_DEVKIT7000		DEVKIT7000		3698
+fmc_uic			MACH_FMC_UIC		FMC_UIC			3699
+fmc_dcm			MACH_FMC_DCM		FMC_DCM			3700
+batwm			MACH_BATWM		BATWM			3701
+atlas6cb		MACH_ATLAS6CB		ATLAS6CB		3702
+quattro_f		MACH_QUATTROF		QUATTROF		3703
+quattro_u		MACH_QUATTROU		QUATTROU		3704
+blue			MACH_BLUE		BLUE			3705
+colorado		MACH_COLORADO		COLORADO		3706
+popc			MACH_POPC		POPC			3707
+promwad_jade		MACH_PROMWAD_JADE	PROMWAD_JADE		3708
+amp			MACH_AMP		AMP			3709
+gnet_amp		MACH_GNET_AMP		GNET_AMP		3710
+toques			MACH_TOQUES		TOQUES			3711
+apx4devkit		MACH_APX4		APX4			3712
+dct_storm		MACH_DCT_STORM		DCT_STORM		3713
+dm8168z3		MACH_Z3			Z3			3714
+owl			MACH_OWL		OWL			3715
+cogent_csb1741		MACH_COGENT_CSB1741	COGENT_CSB1741		3716
+omap3_kiko		MACH_OMAP3		OMAP3			3717
+adillustra610		MACH_ADILLUSTRA610	ADILLUSTRA610		3718
+ecafe_na04		MACH_ECAFE_NA04		ECAFE_NA04		3719
+popct			MACH_POPCT		POPCT			3720
+omap3_helena		MACH_OMAP3_HELENA	OMAP3_HELENA		3721
+ach			MACH_ACH		ACH			3722
+module_dtb		MACH_MODULE_DTB		MODULE_DTB		3723
+ratebox			MACH_RACKBOX		RACKBOX			3724
+oslo_elisabeth		MACH_OSLO_ELISABETH	OSLO_ELISABETH		3725
+tt01			MACH_TT01		TT01			3726
+msm8930_cdp		MACH_MSM8930_CDP	MSM8930_CDP		3727
+msm8930_mtp		MACH_MSM8930_MTP	MSM8930_MTP		3728
+msm8930_fluid		MACH_MSM8930_FLUID	MSM8930_FLUID		3729
+ltu11			MACH_LTU11		LTU11			3730
+am1808_spawnco		MACH_AM1808_SPAWNCO	AM1808_SPAWNCO		3731
+flx6410			MACH_FLX6410		FLX6410			3732
+mx6q_qsb		MACH_MX6Q_QSB		MX6Q_QSB		3733
+mx53_plt424		MACH_MX53_PLT424	MX53_PLT424		3734
+jasmine			MACH_JASMINE		JASMINE			3735
+l138_owlboard_plus	MACH_L138_OWLBOARD_PLUS	L138_OWLBOARD_PLUS	3736
+wr21			MACH_WR21		WR21			3737
+peaboy			MACH_PEABOY		PEABOY			3739
+mx28_plato		MACH_MX28_PLATO		MX28_PLATO		3740
+kacom2			MACH_KACOM2		KACOM2			3741
+slco			MACH_SLCO		SLCO			3742
+imx51pico		MACH_IMX51PICO		IMX51PICO		3743
+glink1			MACH_GLINK1		GLINK1			3744
+diamond			MACH_DIAMOND		DIAMOND			3745
+d9000			MACH_D9000		D9000			3746
+w5300e01		MACH_W5300E01		W5300E01		3747
+im6000			MACH_IM6000		IM6000			3748
+mx51_fred51		MACH_MX51_FRED51	MX51_FRED51		3749
+stm32f2			MACH_STM32F2		STM32F2			3750
+ville			MACH_VILLE		VILLE			3751
+ptip_murnau		MACH_PTIP_MURNAU	PTIP_MURNAU		3752
+ptip_classic		MACH_PTIP_CLASSIC	PTIP_CLASSIC		3753
+mx53grb			MACH_MX53GRB		MX53GRB			3754
+gagarin			MACH_GAGARIN		GAGARIN			3755
+msm7627a_qrd1		MACH_MSM7X27A_QRD1	MSM7X27A_QRD1		3756
+nas2big			MACH_NAS2BIG		NAS2BIG			3757
+superfemto		MACH_SUPERFEMTO		SUPERFEMTO		3758
+teufel			MACH_TEUFEL		TEUFEL			3759
+dinara			MACH_DINARA		DINARA			3760
+vanquish		MACH_VANQUISH		VANQUISH		3761
+zipabox1		MACH_ZIPABOX1		ZIPABOX1		3762
+u9540			MACH_U9540		U9540			3763
+jet			MACH_JET		JET			3764
+smdk4412		MACH_SMDK4412		SMDK4412		3765
+elite			MACH_ELITE		ELITE			3766
+spear320_hmi		MACH_SPEAR320_HMI	SPEAR320_HMI		3767
+ontario			MACH_ONTARIO		ONTARIO			3768
+mx6q_sabrelite		MACH_MX6Q_SABRELITE	MX6Q_SABRELITE		3769
+vc200			MACH_VC200		VC200			3770
+msm7625a_ffa		MACH_MSM7625A_FFA	MSM7625A_FFA		3771
+msm7625a_surf		MACH_MSM7625A_SURF	MSM7625A_SURF		3772
+benthossbp		MACH_BENTHOSSBP		BENTHOSSBP		3773
+smdk5210		MACH_SMDK5210		SMDK5210		3774
+empq2300		MACH_EMPQ2300		EMPQ2300		3775
+minipos			MACH_MINIPOS		MINIPOS			3776
+omap5_sevm		MACH_OMAP5_SEVM		OMAP5_SEVM		3777
+shelter			MACH_SHELTER		SHELTER			3778
+omap3_devkit8500	MACH_OMAP3_DEVKIT8500	OMAP3_DEVKIT8500	3779
+edgetd			MACH_EDGETD		EDGETD			3780
+copperyard		MACH_COPPERYARD		COPPERYARD		3781
+edge			MACH_EDGE		EDGE			3782
+edge_u			MACH_EDGE_U		EDGE_U			3783
+edge_td			MACH_EDGE_TD		EDGE_TD			3784
+wdss			MACH_WDSS		WDSS			3785
+dl_pb25			MACH_DL_PB25		DL_PB25			3786
+dss11			MACH_DSS11		DSS11			3787
+cpa			MACH_CPA		CPA			3788
+aptp2000		MACH_APTP2000		APTP2000		3789
+marzen			MACH_MARZEN		MARZEN			3790
+st_turbine		MACH_ST_TURBINE		ST_TURBINE		3791
+gtl_it3300		MACH_GTL_IT3300		GTL_IT3300		3792
+mx6_mule		MACH_MX6_MULE		MX6_MULE		3793
+v7pxa_dt		MACH_V7PXA_DT		V7PXA_DT		3794
+v7mmp_dt		MACH_V7MMP_DT		V7MMP_DT		3795
+dragon7			MACH_DRAGON7		DRAGON7			3796
+krome			MACH_KROME		KROME			3797
+oratisdante		MACH_ORATISDANTE	ORATISDANTE		3798
+fathom			MACH_FATHOM		FATHOM			3799
+dns325			MACH_DNS325		DNS325			3800
+sarnen			MACH_SARNEN		SARNEN			3801
+ubisys_g1		MACH_UBISYS_G1		UBISYS_G1		3802
+mx53_pf1		MACH_MX53_PF1		MX53_PF1		3803
+asanti			MACH_ASANTI		ASANTI			3804
+volta			MACH_VOLTA		VOLTA			3805
+potenza			MACH_S5P6450		S5P6450			3806
+knight			MACH_KNIGHT		KNIGHT			3807
+beaglebone		MACH_BEAGLEBONE		BEAGLEBONE		3808
+becker			MACH_BECKER		BECKER			3809
+fc360			MACH_FC360		FC360			3810
+pmi2_xls		MACH_PMI2_XLS		PMI2_XLS		3811
+taranto			MACH_TARANTO		TARANTO			3812
+plutux			MACH_PLUTUX		PLUTUX			3813
+ipmp_medcom		MACH_IPMP_MEDCOM	IPMP_MEDCOM		3814
+absolut			MACH_ABSOLUT		ABSOLUT			3815
+awpb3			MACH_AWPB3		AWPB3			3816
+nfp32xx_dt		MACH_NFP32XX_DT		NFP32XX_DT		3817
+dl_pb53			MACH_DL_PB53		DL_PB53			3818
+acu_ii			MACH_ACU_II		ACU_II			3819
+avalon			MACH_AVALON		AVALON			3820
+sphinx			MACH_SPHINX		SPHINX			3821
+titan_t			MACH_TITAN_T		TITAN_T			3822
+harvest_boris		MACH_HARVEST_BORIS	HARVEST_BORIS		3823
+mach_msm7x30_m3s	MACH_MACH_MSM7X30_M3S	MACH_MSM7X30_M3S	3824
+smdk5250		MACH_SMDK5250		SMDK5250		3825
+imxt_lite		MACH_IMXT_LITE		IMXT_LITE		3826
+imxt_std		MACH_IMXT_STD		IMXT_STD		3827
+imxt_log		MACH_IMXT_LOG		IMXT_LOG		3828
+imxt_nav		MACH_IMXT_NAV		IMXT_NAV		3829
+imxt_full		MACH_IMXT_FULL		IMXT_FULL		3830
+ag09015			MACH_AG09015		AG09015			3831
+am3517_mt_ventoux	MACH_AM3517_MT_VENTOUX	AM3517_MT_VENTOUX	3832
+dp1arm9			MACH_DP1ARM9		DP1ARM9			3833
+picasso_m		MACH_PICASSO_M		PICASSO_M		3834
+video_gadget		MACH_VIDEO_GADGET	VIDEO_GADGET		3835
+mtt_om3x		MACH_MTT_OM3X		MTT_OM3X		3836
+mx6q_arm2		MACH_MX6Q_ARM2		MX6Q_ARM2		3837
+picosam9g45		MACH_PICOSAM9G45	PICOSAM9G45		3838
+vpm_dm365		MACH_VPM_DM365		VPM_DM365		3839
+bonfire			MACH_BONFIRE		BONFIRE			3840
+mt2p2d			MACH_MT2P2D		MT2P2D			3841
+sigpda01		MACH_SIGPDA01		SIGPDA01		3842
+cn27			MACH_CN27		CN27			3843
+mx25_cwtap		MACH_MX25_CWTAP		MX25_CWTAP		3844
+apf28			MACH_APF28		APF28			3845
+pelco_maxwell		MACH_PELCO_MAXWELL	PELCO_MAXWELL		3846
+ge_phoenix		MACH_GE_PHOENIX		GE_PHOENIX		3847
+empc_a500		MACH_EMPC_A500		EMPC_A500		3848
+ims_arm9		MACH_IMS_ARM9		IMS_ARM9		3849
+mini2416		MACH_MINI2416		MINI2416		3850
+mini2450		MACH_MINI2450		MINI2450		3851
+mini310			MACH_MINI310		MINI310			3852
+spear_hurricane		MACH_SPEAR_HURRICANE	SPEAR_HURRICANE		3853
+mt7208			MACH_MT7208		MT7208			3854
+lpc178x			MACH_LPC178X		LPC178X			3855
+farleys			MACH_FARLEYS		FARLEYS			3856
+efm32gg_dk3750		MACH_EFM32GG_DK3750	EFM32GG_DK3750		3857
+zeus_board		MACH_ZEUS_BOARD		ZEUS_BOARD		3858
+cc51			MACH_CC51		CC51			3859
+fxi_c210		MACH_FXI_C210		FXI_C210		3860
+msm8627_cdp		MACH_MSM8627_CDP	MSM8627_CDP		3861
+msm8627_mtp		MACH_MSM8627_MTP	MSM8627_MTP		3862
+armadillo800eva		MACH_ARMADILLO800EVA	ARMADILLO800EVA		3863
+primou			MACH_PRIMOU		PRIMOU			3864
+primoc			MACH_PRIMOC		PRIMOC			3865
+primoct			MACH_PRIMOCT		PRIMOCT			3866
+a9500			MACH_A9500		A9500			3867
+pue_td			MACH_PULSE_TD		PULSE_TD		3868
+pluto			MACH_PLUTO		PLUTO			3869
+acfx100			MACH_ACFX100		ACFX100			3870
+msm8625_rumi3		MACH_MSM8625_RUMI3	MSM8625_RUMI3		3871
+valente			MACH_VALENTE		VALENTE			3872
+crfs_rfeye		MACH_CRFS_RFEYE		CRFS_RFEYE		3873
+rfeye			MACH_RFEYE		RFEYE			3874
+phidget_sbc3		MACH_PHIDGET_SBC3	PHIDGET_SBC3		3875
+tcw_mika		MACH_TCW_MIKA		TCW_MIKA		3876
+imx28_egf		MACH_IMX28_EGF		IMX28_EGF		3877
+valente_wx		MACH_VALENTE_WX		VALENTE_WX		3878
+huangshans		MACH_HUANGSHANS		HUANGSHANS		3879
+bosphorus1		MACH_BOSPHORUS1		BOSPHORUS1		3880
+prima			MACH_PRIMA		PRIMA			3881
+meson3_skt		MACH_M3_SKT		M3_SKT			3882
+meson3_ref		MACH_M3_REF		M3_REF			3883
+evita_ulk		MACH_EVITA_ULK		EVITA_ULK		3884
+merisc600		MACH_MERISC600		MERISC600		3885
+dolak			MACH_DOLAK		DOLAK			3886
+sbc53			MACH_SBC53		SBC53			3887
+elite_ulk		MACH_ELITE_ULK		ELITE_ULK		3888
+pov2			MACH_POV2		POV2			3889
+ipod_touch_2g		MACH_IPOD_TOUCH_2G	IPOD_TOUCH_2G		3890
+da850_pqab		MACH_DA850_PQAB		DA850_PQAB		3891
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 6/7] platform: add support for aizo dSS11

[Michael Grzeschik]

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/Makefile                |    1 +
 arch/arm/boards/dss11/Makefile   |    1 +
 arch/arm/boards/dss11/config.h   |    6 ++
 arch/arm/boards/dss11/env/config |   42 ++++++++++
 arch/arm/boards/dss11/init.c     |  156 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig       |    8 ++
 6 files changed, 214 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/dss11/Makefile
 create mode 100644 arch/arm/boards/dss11/config.h
 create mode 100644 arch/arm/boards/dss11/env/config
 create mode 100644 arch/arm/boards/dss11/init.c

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f5f343..e5e951c 100644
 - removed GPL address
 - increased barebox and env partition size
 - changed boot partition on nand
 - removed lowlevel.S
 - fixed nand bus_width to 16
 - moved ethernet pin handling to another patch
 - touch mach-types from another patch
 - removed kernel and rootfs partitions
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -66,6 +66,7 @@ board-$(CONFIG_MACH_AT91SAM9263EK)		:= at91sam9263ek
 board-$(CONFIG_MACH_AT91SAM9G10EK)		:= at91sam9261ek
 board-$(CONFIG_MACH_AT91SAM9G20EK)		:= at91sam9260ek
 board-$(CONFIG_MACH_AT91SAM9M10G45EK)		:= at91sam9m10g45ek
+board-$(CONFIG_MACH_DSS11)			:= dss11
 board-$(CONFIG_MACH_EDB9301)			:= edb93xx
 board-$(CONFIG_MACH_EDB9302)			:= edb93xx
 board-$(CONFIG_MACH_EDB9302A)			:= edb93xx
diff --git a/arch/arm/boards/dss11/Makefile b/arch/arm/boards/dss11/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/dss11/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/dss11/config.h b/arch/arm/boards/dss11/config.h
new file mode 100644
index 0000000..006820c
--- /dev/null
+++ b/arch/arm/boards/dss11/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/dss11/env/config b/arch/arm/boards/dss11/env/config
new file mode 100644
index 0000000..5c9be7d
--- /dev/null
+++ b/arch/arm/boards/dss11/env/config
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'nfs', 'tftp' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nand_device=atmel_nand
+nand_parts="128k(bootstrap),512k(barebox)ro,512k(barebox-env),2M(kernel-rescue),2M(kernel-prod),32M(rootfs-rescue),200M(rootfs-prod),-(config)"
+rootfs_mtdblock_nand=4
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
+
diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
new file mode 100644
index 0000000..96c4eef
--- /dev/null
+++ b/arch/arm/boards/dss11/init.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2011 Michael Grzeschik <mgr@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <mci.h>
+#include <init.h>
+#include <environment.h>
+#include <fec.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <linux/mtd/nand.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <gpio.h>
+#include <mach/io.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+static struct atmel_nand_data nand_pdata = {
+	.ale		= 21,
+	.cle		= 22,
+/*	.det_pin	= ... not connected */
+	.ecc_mode	= NAND_ECC_HW,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 1,
+};
+
+static struct sam9_smc_config dss11_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void dss11_add_device_nand(void)
+{
+	/* setup bus-width (16) */
+	dss11_nand_smc_config.mode |= AT91_SMC_DBW_16;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &dss11_nand_smc_config);
+
+	at91_add_device_nand(&nand_pdata);
+}
+
+static struct at91_ether_platform_data macb_pdata = {
+	.phy_addr = 0,
+	.flags = AT91SAM_ETX2_ETX3_ALTERNATIVE,
+};
+
+static void dss11_phy_reset(void)
+{
+	unsigned long rstc;
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+	at91_set_gpio_input(AT91_PIN_PA14, 0);
+	at91_set_gpio_input(AT91_PIN_PA15, 0);
+	at91_set_gpio_input(AT91_PIN_PA17, 0);
+	at91_set_gpio_input(AT91_PIN_PA25, 0);
+	at91_set_gpio_input(AT91_PIN_PA26, 0);
+	at91_set_gpio_input(AT91_PIN_PA28, 0);
+
+	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0d << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (rstc) |
+				     AT91_RSTC_URSTEN);
+}
+
+static struct atmel_mci_platform_data dss11_mci_data = {
+	.bus_width	= 4,
+	.host_caps	= MMC_MODE_HS,
+};
+
+static struct at91_usbh_data dss11_usbh_data = {
+	.ports		= 2,
+};
+
+static int dss11_mem_init(void)
+{
+	at91_add_device_sdram(64 * 1024 * 1024);
+
+	return 0;
+}
+mem_initcall(dss11_mem_init);
+
+static int dss11_devices_init(void)
+{
+	dss11_add_device_nand();
+	dss11_phy_reset();
+	at91_add_device_eth(&macb_pdata);
+	at91_add_device_mci(1, &dss11_mci_data);
+	at91_add_device_usbh_ohci(&dss11_usbh_data);
+
+	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+	armlinux_set_architecture(MACH_TYPE_DSS11);
+
+	devfs_add_partition("nand0", 0x00000, 0x20000, PARTITION_FIXED, "bootstrap");
+	dev_add_bb_dev("bootstrap", "bootstrap.bb");
+	devfs_add_partition("nand0", 0x20000, 0x40000, PARTITION_FIXED, "barebox");
+	dev_add_bb_dev("barebox", "barebox.bb");
+	devfs_add_partition("nand0", 0x60000, 0x40000, PARTITION_FIXED, "barebox-env");
+	dev_add_bb_dev("barebox-env", "env0");
+
+	return 0;
+}
+device_initcall(dss11_devices_init);
+
+static int dss11_console_init(void)
+{
+	at91_register_uart(0, 0);
+	return 0;
+}
+console_initcall(dss11_console_init);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2ac23b5..e0e17bb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -20,6 +20,7 @@ config BOARDINFO
 	default "Ronetix PM9261" if MACH_PM9261
 	default "Ronetix PM9263" if MACH_PM9263
 	default "Ronetix PM9G45" if MACH_PM9G45
+	default "Aizo dSS11" if MACH_DSS11
 
 config HAVE_NAND_ATMEL_BUSWIDTH_16
 	bool
@@ -175,6 +176,13 @@ config MACH_USB_A9G20
 	  Select this if you are using a Calao Systems USB-A9G20.
 	  <http://www.calao-systems.com>
 
+config MACH_DSS11
+	bool "aizo dSS11"
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
+	help
+	  Select this if you are using aizo dSS11
+	  that embeds only one SD/MMC slot.
+
 endchoice
 
 endif
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: *** PROBABLY SPAM *** [PATCH v2 6/7] platform: add support for aizo dSS11

[Jean-Christophe PLAGNIOL-VILLARD]

On 12:29 Fri 09 Dec     , Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
>  arch/arm/Makefile                |    1 +
>  arch/arm/boards/dss11/Makefile   |    1 +
>  arch/arm/boards/dss11/config.h   |    6 ++
>  arch/arm/boards/dss11/env/config |   42 ++++++++++
>  arch/arm/boards/dss11/init.c     |  156 ++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-at91/Kconfig       |    8 ++
>  6 files changed, 214 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boards/dss11/Makefile
>  create mode 100644 arch/arm/boards/dss11/config.h
>  create mode 100644 arch/arm/boards/dss11/env/config
>  create mode 100644 arch/arm/boards/dss11/init.c
> 
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 6f5f343..e5e951c 100644
>  - removed GPL address
>  - increased barebox and env partition size
>  - changed boot partition on nand
>  - removed lowlevel.S
>  - fixed nand bus_width to 16
>  - moved ethernet pin handling to another patch
>  - touch mach-types from another patch
>  - removed kernel and rootfs partitions
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -66,6 +66,7 @@ board-$(CONFIG_MACH_AT91SAM9263EK)		:= at91sam9263ek
>  board-$(CONFIG_MACH_AT91SAM9G10EK)		:= at91sam9261ek
>  board-$(CONFIG_MACH_AT91SAM9G20EK)		:= at91sam9260ek
>  board-$(CONFIG_MACH_AT91SAM9M10G45EK)		:= at91sam9m10g45ek
> +board-$(CONFIG_MACH_DSS11)			:= dss11
>  board-$(CONFIG_MACH_EDB9301)			:= edb93xx
>  board-$(CONFIG_MACH_EDB9302)			:= edb93xx
>  board-$(CONFIG_MACH_EDB9302A)			:= edb93xx
> diff --git a/arch/arm/boards/dss11/Makefile b/arch/arm/boards/dss11/Makefile
> new file mode 100644
> index 0000000..eb072c0
> --- /dev/null
> +++ b/arch/arm/boards/dss11/Makefile
> @@ -0,0 +1 @@
> +obj-y += init.o
> diff --git a/arch/arm/boards/dss11/config.h b/arch/arm/boards/dss11/config.h
> new file mode 100644
> index 0000000..006820c
> --- /dev/null
> +++ b/arch/arm/boards/dss11/config.h
> @@ -0,0 +1,6 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
> +
> +#endif	/* __CONFIG_H */
> diff --git a/arch/arm/boards/dss11/env/config b/arch/arm/boards/dss11/env/config
> new file mode 100644
> index 0000000..5c9be7d
> --- /dev/null
> +++ b/arch/arm/boards/dss11/env/config
> @@ -0,0 +1,42 @@
> +#!/bin/sh
> +
> +# use 'dhcp' to do dhcp in barebox and in kernel
> +# use 'none' if you want to skip kernel ip autoconfiguration
> +ip=dhcp
> +
> +# or set your networking parameters here
> +#eth0.ipaddr=a.b.c.d
> +#eth0.netmask=a.b.c.d
> +#eth0.gateway=a.b.c.d
> +#eth0.serverip=a.b.c.d
> +
> +# can be either 'nfs', 'tftp' or 'nand'
> +kernel_loc=tftp
> +# can be either 'net', 'nand' or 'initrd'
> +rootfs_loc=net
> +
> +# can be either 'jffs2' or 'ubifs'
> +rootfs_type=ubifs
> +rootfsimage=root.$rootfs_type
> +
> +# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> +#kernelimage_type=zimage
> +#kernelimage=zImage
> +kernelimage_type=uimage
> +kernelimage=uImage
> +#kernelimage_type=raw
> +#kernelimage=Image
> +#kernelimage_type=raw_lzo
> +#kernelimage=Image.lzo
> +
> +nand_device=atmel_nand
> +nand_parts="128k(bootstrap),512k(barebox)ro,512k(barebox-env),2M(kernel-rescue),2M(kernel-prod),32M(rootfs-rescue),200M(rootfs-prod),-(config)"
> +rootfs_mtdblock_nand=4
> +
> +autoboot_timeout=3
> +
> +bootargs="console=ttyS0,115200"
> +
> +# set a fancy prompt (if support is compiled in)
> +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> +
> diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
> new file mode 100644
> index 0000000..96c4eef
> --- /dev/null
> +++ b/arch/arm/boards/dss11/init.c
> @@ -0,0 +1,156 @@
> +/*
> + * Copyright (C) 2011 Michael Grzeschik <mgr@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <net.h>
> +#include <mci.h>
> +#include <init.h>
> +#include <environment.h>
> +#include <fec.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <partition.h>
> +#include <fs.h>
> +#include <fcntl.h>
> +#include <asm/io.h>
> +#include <asm/hardware.h>
> +#include <nand.h>
> +#include <linux/mtd/nand.h>
> +#include <mach/board.h>
> +#include <mach/at91sam9_smc.h>
> +#include <mach/sam9_smc.h>
> +#include <gpio.h>
> +#include <mach/io.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/at91_rstc.h>
> +
> +static struct atmel_nand_data nand_pdata = {
> +	.ale		= 21,
> +	.cle		= 22,
> +/*	.det_pin	= ... not connected */
please use -EINVAL

I'm going to apply the same cleanup on barebox that I did on the kernel
> +	.ecc_mode	= NAND_ECC_HW,

this will not work IIRC
the current implementation is bugged
I've to fix it in the kernel at least
> +	.rdy_pin	= AT91_PIN_PC13,
> +	.enable_pin	= AT91_PIN_PC14,
> +	.bus_width_16	= 1,
> +};
> +
> +static struct sam9_smc_config dss11_nand_smc_config = {
> +	.ncs_read_setup		= 0,
> +	.nrd_setup		= 1,
> +	.ncs_write_setup	= 0,
> +	.nwe_setup		= 1,
> +
> +	.ncs_read_pulse		= 3,
> +	.nrd_pulse		= 3,
> +	.ncs_write_pulse	= 3,
> +	.nwe_pulse		= 3,
> +
> +	.read_cycle		= 5,
> +	.write_cycle		= 5,
> +
> +	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
> +	.tdf_cycles		= 2,
> +};
> +
> +static void dss11_add_device_nand(void)
> +{
> +	/* setup bus-width (16) */
> +	dss11_nand_smc_config.mode |= AT91_SMC_DBW_16;
put it directly in the struct to reduce the size
> +
> +	/* configure chip-select 3 (NAND) */
> +	sam9_smc_configure(3, &dss11_nand_smc_config);
> +
> +	at91_add_device_nand(&nand_pdata);
> +}
> +
> +static struct at91_ether_platform_data macb_pdata = {
> +	.phy_addr = 0,
> +	.flags = AT91SAM_ETX2_ETX3_ALTERNATIVE,
> +};
> +
> +static void dss11_phy_reset(void)
> +{
> +	unsigned long rstc;
> +	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
> +
> +	at91_set_gpio_input(AT91_PIN_PA14, 0);
> +	at91_set_gpio_input(AT91_PIN_PA15, 0);
> +	at91_set_gpio_input(AT91_PIN_PA17, 0);
> +	at91_set_gpio_input(AT91_PIN_PA25, 0);
> +	at91_set_gpio_input(AT91_PIN_PA26, 0);
> +	at91_set_gpio_input(AT91_PIN_PA28, 0);
> +
> +	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
> +
> +	/* Need to reset PHY -> 500ms reset */
> +	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> +				     (AT91_RSTC_ERSTL & (0x0d << 8)) |
> +				     AT91_RSTC_URSTEN);
> +
> +	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
> +
> +	/* Wait for end hardware reset */
> +	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
> +
> +	/* Restore NRST value */
> +	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> +				     (rstc) |
> +				     AT91_RSTC_URSTEN);
> +}
> +
> +static struct atmel_mci_platform_data dss11_mci_data = {
> +	.bus_width	= 4,
> +	.host_caps	= MMC_MODE_HS,
> +};
> +
> +static struct at91_usbh_data dss11_usbh_data = {
> +	.ports		= 2,
> +};
> +
> +static int dss11_mem_init(void)
> +{
> +	at91_add_device_sdram(64 * 1024 * 1024);
> +
> +	return 0;
> +}
> +mem_initcall(dss11_mem_init);
> +
> +static int dss11_devices_init(void)
> +{
> +	dss11_add_device_nand();
> +	dss11_phy_reset();
> +	at91_add_device_eth(&macb_pdata);
> +	at91_add_device_mci(1, &dss11_mci_data);
> +	at91_add_device_usbh_ohci(&dss11_usbh_data);
> +
> +	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
> +	armlinux_set_architecture(MACH_TYPE_DSS11);
> +
> +	devfs_add_partition("nand0", 0x00000, 0x20000, PARTITION_FIXED, "bootstrap");
> +	dev_add_bb_dev("bootstrap", "bootstrap.bb");
> +	devfs_add_partition("nand0", 0x20000, 0x40000, PARTITION_FIXED, "barebox");
> +	dev_add_bb_dev("barebox", "barebox.bb");
> +	devfs_add_partition("nand0", 0x60000, 0x40000, PARTITION_FIXED, "barebox-env");
> +	dev_add_bb_dev("barebox-env", "env0");
> +
> +	return 0;
> +}
> +device_initcall(dss11_devices_init);
> +
> +static int dss11_console_init(void)
> +{
> +	at91_register_uart(0, 0);
> +	return 0;
> +}
> +console_initcall(dss11_console_init);
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 2ac23b5..e0e17bb 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -20,6 +20,7 @@ config BOARDINFO
>  	default "Ronetix PM9261" if MACH_PM9261
>  	default "Ronetix PM9263" if MACH_PM9263
>  	default "Ronetix PM9G45" if MACH_PM9G45
> +	default "Aizo dSS11" if MACH_DSS11
please keep it sort
>  
>  config HAVE_NAND_ATMEL_BUSWIDTH_16
>  	bool
> @@ -175,6 +176,13 @@ config MACH_USB_A9G20
>  	  Select this if you are using a Calao Systems USB-A9G20.
>  	  <http://www.calao-systems.com>
>  
> +config MACH_DSS11
> +	bool "aizo dSS11"
> +	select HAVE_NAND_ATMEL_BUSWIDTH_16
> +	help
> +	  Select this if you are using aizo dSS11
> +	  that embeds only one SD/MMC slot.
ditto

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: *** PROBABLY SPAM *** [PATCH v2 6/7] platform: add support for aizo dSS11

[Sascha Hauer]

On Fri, Dec 09, 2011 at 04:01:31PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:29 Fri 09 Dec     , Michael Grzeschik wrote:
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > ---
> >  arch/arm/Makefile                |    1 +
> >  arch/arm/boards/dss11/Makefile   |    1 +
> >  arch/arm/boards/dss11/config.h   |    6 ++
> >  arch/arm/boards/dss11/env/config |   42 ++++++++++
> >  arch/arm/boards/dss11/init.c     |  156 ++++++++++++++++++++++++++++++++++++++
> >  arch/arm/mach-at91/Kconfig       |    8 ++
> >  6 files changed, 214 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boards/dss11/Makefile
> >  create mode 100644 arch/arm/boards/dss11/config.h
> >  create mode 100644 arch/arm/boards/dss11/env/config
> >  create mode 100644 arch/arm/boards/dss11/init.c
> > 
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index 6f5f343..e5e951c 100644
> >  - removed GPL address
> >  - increased barebox and env partition size
> >  - changed boot partition on nand
> >  - removed lowlevel.S
> >  - fixed nand bus_width to 16
> >  - moved ethernet pin handling to another patch
> >  - touch mach-types from another patch
> >  - removed kernel and rootfs partitions
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -66,6 +66,7 @@ board-$(CONFIG_MACH_AT91SAM9263EK)		:= at91sam9263ek
> >  board-$(CONFIG_MACH_AT91SAM9G10EK)		:= at91sam9261ek
> >  board-$(CONFIG_MACH_AT91SAM9G20EK)		:= at91sam9260ek
> >  board-$(CONFIG_MACH_AT91SAM9M10G45EK)		:= at91sam9m10g45ek
> > +board-$(CONFIG_MACH_DSS11)			:= dss11
> >  board-$(CONFIG_MACH_EDB9301)			:= edb93xx
> >  board-$(CONFIG_MACH_EDB9302)			:= edb93xx
> >  board-$(CONFIG_MACH_EDB9302A)			:= edb93xx
> > diff --git a/arch/arm/boards/dss11/Makefile b/arch/arm/boards/dss11/Makefile
> > new file mode 100644
> > index 0000000..eb072c0
> > --- /dev/null
> > +++ b/arch/arm/boards/dss11/Makefile
> > @@ -0,0 +1 @@
> > +obj-y += init.o
> > diff --git a/arch/arm/boards/dss11/config.h b/arch/arm/boards/dss11/config.h
> > new file mode 100644
> > index 0000000..006820c
> > --- /dev/null
> > +++ b/arch/arm/boards/dss11/config.h
> > @@ -0,0 +1,6 @@
> > +#ifndef __CONFIG_H
> > +#define __CONFIG_H
> > +
> > +#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
> > +
> > +#endif	/* __CONFIG_H */
> > diff --git a/arch/arm/boards/dss11/env/config b/arch/arm/boards/dss11/env/config
> > new file mode 100644
> > index 0000000..5c9be7d
> > --- /dev/null
> > +++ b/arch/arm/boards/dss11/env/config
> > @@ -0,0 +1,42 @@
> > +#!/bin/sh
> > +
> > +# use 'dhcp' to do dhcp in barebox and in kernel
> > +# use 'none' if you want to skip kernel ip autoconfiguration
> > +ip=dhcp
> > +
> > +# or set your networking parameters here
> > +#eth0.ipaddr=a.b.c.d
> > +#eth0.netmask=a.b.c.d
> > +#eth0.gateway=a.b.c.d
> > +#eth0.serverip=a.b.c.d
> > +
> > +# can be either 'nfs', 'tftp' or 'nand'
> > +kernel_loc=tftp
> > +# can be either 'net', 'nand' or 'initrd'
> > +rootfs_loc=net
> > +
> > +# can be either 'jffs2' or 'ubifs'
> > +rootfs_type=ubifs
> > +rootfsimage=root.$rootfs_type
> > +
> > +# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> > +#kernelimage_type=zimage
> > +#kernelimage=zImage
> > +kernelimage_type=uimage
> > +kernelimage=uImage
> > +#kernelimage_type=raw
> > +#kernelimage=Image
> > +#kernelimage_type=raw_lzo
> > +#kernelimage=Image.lzo
> > +
> > +nand_device=atmel_nand
> > +nand_parts="128k(bootstrap),512k(barebox)ro,512k(barebox-env),2M(kernel-rescue),2M(kernel-prod),32M(rootfs-rescue),200M(rootfs-prod),-(config)"
> > +rootfs_mtdblock_nand=4
> > +
> > +autoboot_timeout=3
> > +
> > +bootargs="console=ttyS0,115200"
> > +
> > +# set a fancy prompt (if support is compiled in)
> > +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> > +
> > diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
> > new file mode 100644
> > index 0000000..96c4eef
> > --- /dev/null
> > +++ b/arch/arm/boards/dss11/init.c
> > @@ -0,0 +1,156 @@
> > +/*
> > + * Copyright (C) 2011 Michael Grzeschik <mgr@pengutronix.de>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <common.h>
> > +#include <net.h>
> > +#include <mci.h>
> > +#include <init.h>
> > +#include <environment.h>
> > +#include <fec.h>
> > +#include <asm/armlinux.h>
> > +#include <generated/mach-types.h>
> > +#include <partition.h>
> > +#include <fs.h>
> > +#include <fcntl.h>
> > +#include <asm/io.h>
> > +#include <asm/hardware.h>
> > +#include <nand.h>
> > +#include <linux/mtd/nand.h>
> > +#include <mach/board.h>
> > +#include <mach/at91sam9_smc.h>
> > +#include <mach/sam9_smc.h>
> > +#include <gpio.h>
> > +#include <mach/io.h>
> > +#include <mach/at91_pmc.h>
> > +#include <mach/at91_rstc.h>
> > +
> > +static struct atmel_nand_data nand_pdata = {
> > +	.ale		= 21,
> > +	.cle		= 22,
> > +/*	.det_pin	= ... not connected */
> please use -EINVAL

Setting this to EINVAL will not work as the users test for det_pin != 0.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 7/7] dss11: add defconfig

[Michael Grzeschik]

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/configs/dss11_defconfig |   48 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/dss11_defconfig

diff --git a/arch/arm/configs/dss11_defconfig b/arch/arm/configs/dss11_defconfig
new file mode 100644
index 0000000..71143c9
--- /dev/null
+++ b/arch/arm/configs/dss11_defconfig
@@ -0,0 +1,48 @@
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_DSS11=y
+CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION_DISK_DOS=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_LED=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_DRIVER_NET_MACB=y
+CONFIG_DRIVER_SPI_ATMEL=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
+CONFIG_DISK_WRITE=y
+CONFIG_USB=y
+CONFIG_USB_OHCI=y
+CONFIG_USB_OHCI_AT91=y
+CONFIG_USB_STORAGE=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+# CONFIG_MCI_WRITE is not set
+CONFIG_MCI_ATMEL=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_RGB=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
-- 
1.7.7.3



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox