mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 1/1] calao/usb-926x: update usb gadget support
Date: Wed, 4 Jan 2012 10:06:26 +0100	[thread overview]
Message-ID: <20120104090626.GC18008@game.jcrosoft.org> (raw)
In-Reply-To: <1325667838-18996-1-git-send-email-plagnioj@jcrosoft.com>

On 10:03 Wed 04 Jan     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> enable serial and dfu at the same time
> 
> senario if the usb device is plugged and the BP is not pressed at boot time
> during 5s the usbserial will be enable
> 
> disable zlib support to fit in the 256K
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> Hi,
> 
apply over this patch

v3 serial gadget: enable/disable on request

Best Regards,
J.
> 	
>  arch/arm/boards/usb-a926x/env/bin/init_board |   24 +++++++++++++++---------
>  arch/arm/configs/usb_a9260_defconfig         |    6 +++++-
>  arch/arm/configs/usb_a9263_128mib_defconfig  |    6 +++++-
>  arch/arm/configs/usb_a9263_defconfig         |    6 +++++-
>  arch/arm/configs/usb_a9g20_128mib_defconfig  |    6 +++++-
>  arch/arm/configs/usb_a9g20_defconfig         |    6 +++++-
>  6 files changed, 40 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boards/usb-a926x/env/bin/init_board b/arch/arm/boards/usb-a926x/env/bin/init_board
> index 77e5c1a..0a6baf7 100644
> --- a/arch/arm/boards/usb-a926x/env/bin/init_board
> +++ b/arch/arm/boards/usb-a926x/env/bin/init_board
> @@ -8,31 +8,37 @@ vendor_id=0x4321
>  
>  dfu_config="/dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.rootfs.bb(rootfs)r"
>  
> -gpio_get_value ${dfu_button}
> -if [ $? != 0 ]
> +if [ $at91_udc0.vbus != 1 ]
>  then
> +	echo "No USB Device cable plugged, normal boot"
>  	exit
>  fi
>  
> -if [ $at91_udc0.vbus != 1 ]
> +gpio_get_value ${dfu_button}
> +if [ $? != 0 ]
>  then
> -	echo "No USB Device cable plugged, normal boot"
> +	autoboot_timeout=16
> +	echo "enable tty over USB Device, increase the boot delay to ${autoboot_timeout}s"
> +	usbserial
>  	exit
>  fi
>  
>  echo "${button_name} pressed detected wait ${button_wait}s"
>  timeout -s -a ${button_wait}
>  
> -gpio_get_value ${dfu_button}
> -if [ $? != 0 ]
> +if [ $at91_udc0.vbus != 1 ]
>  then
> -	echo "${button_name} released, normal boot"
> +	echo "No USB Device cable plugged, normal boot"
>  	exit
>  fi
>  
> -if [ $at91_udc0.vbus != 1 ]
> +gpio_get_value ${dfu_button}
> +if [ $? != 0 ]
>  then
> -	echo "No USB Device cable plugged, normal boot"
> +	echo "${button_name} released, normal boot"
> +	autoboot_timeout=16
> +	echo "enable tty over USB Device, increase the boot delay to ${autoboot_timeout}s"
> +	usbserial
>  	exit
>  fi
>  
> diff --git a/arch/arm/configs/usb_a9260_defconfig b/arch/arm/configs/usb_a9260_defconfig
> index 6c6eac2..9073d04 100644
> --- a/arch/arm/configs/usb_a9260_defconfig
> +++ b/arch/arm/configs/usb_a9260_defconfig
> @@ -3,6 +3,7 @@ CONFIG_MACH_USB_A9260=y
>  CONFIG_AEABI=y
>  # CONFIG_CMD_ARM_CPUINFO is not set
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_EXPERIMENTAL=y
>  CONFIG_PROMPT="USB-9G20:"
>  CONFIG_LONGHELP=y
>  CONFIG_GLOB=y
> @@ -11,6 +12,8 @@ CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
>  CONFIG_MENU=y
> +# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>  CONFIG_PARTITION=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
> @@ -64,7 +67,8 @@ CONFIG_NAND=y
>  CONFIG_NAND_ATMEL=y
>  CONFIG_UBI=y
>  CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> -CONFIG_ZLIB=y
> diff --git a/arch/arm/configs/usb_a9263_128mib_defconfig b/arch/arm/configs/usb_a9263_128mib_defconfig
> index 0b0ad80..457b25c 100644
> --- a/arch/arm/configs/usb_a9263_128mib_defconfig
> +++ b/arch/arm/configs/usb_a9263_128mib_defconfig
> @@ -4,6 +4,7 @@ CONFIG_AEABI=y
>  # CONFIG_CMD_ARM_CPUINFO is not set
>  CONFIG_AT91_HAVE_SRAM_128M=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_EXPERIMENTAL=y
>  CONFIG_PROMPT="USB-9G20:"
>  CONFIG_LONGHELP=y
>  CONFIG_GLOB=y
> @@ -12,6 +13,8 @@ CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
>  CONFIG_MENU=y
> +# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>  CONFIG_PARTITION=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
> @@ -65,7 +68,8 @@ CONFIG_NAND=y
>  CONFIG_NAND_ATMEL=y
>  CONFIG_UBI=y
>  CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> -CONFIG_ZLIB=y
> diff --git a/arch/arm/configs/usb_a9263_defconfig b/arch/arm/configs/usb_a9263_defconfig
> index 168a5d1..6a7ded7 100644
> --- a/arch/arm/configs/usb_a9263_defconfig
> +++ b/arch/arm/configs/usb_a9263_defconfig
> @@ -3,6 +3,7 @@ CONFIG_MACH_USB_A9263=y
>  CONFIG_AEABI=y
>  # CONFIG_CMD_ARM_CPUINFO is not set
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_EXPERIMENTAL=y
>  CONFIG_PROMPT="USB-9G20:"
>  CONFIG_LONGHELP=y
>  CONFIG_GLOB=y
> @@ -11,6 +12,8 @@ CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
>  CONFIG_MENU=y
> +# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>  CONFIG_PARTITION=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
> @@ -64,7 +67,8 @@ CONFIG_NAND=y
>  CONFIG_NAND_ATMEL=y
>  CONFIG_UBI=y
>  CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> -CONFIG_ZLIB=y
> diff --git a/arch/arm/configs/usb_a9g20_128mib_defconfig b/arch/arm/configs/usb_a9g20_128mib_defconfig
> index a02002f..3d44f39 100644
> --- a/arch/arm/configs/usb_a9g20_128mib_defconfig
> +++ b/arch/arm/configs/usb_a9g20_128mib_defconfig
> @@ -4,6 +4,7 @@ CONFIG_AEABI=y
>  # CONFIG_CMD_ARM_CPUINFO is not set
>  CONFIG_AT91_HAVE_SRAM_128M=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_EXPERIMENTAL=y
>  CONFIG_PROMPT="USB-9G20:"
>  CONFIG_LONGHELP=y
>  CONFIG_GLOB=y
> @@ -12,6 +13,8 @@ CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
>  CONFIG_MENU=y
> +# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>  CONFIG_PARTITION=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
> @@ -65,7 +68,8 @@ CONFIG_NAND=y
>  CONFIG_NAND_ATMEL=y
>  CONFIG_UBI=y
>  CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> -CONFIG_ZLIB=y
> diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
> index e4dd424..7abcd95 100644
> --- a/arch/arm/configs/usb_a9g20_defconfig
> +++ b/arch/arm/configs/usb_a9g20_defconfig
> @@ -3,6 +3,7 @@ CONFIG_MACH_USB_A9G20=y
>  CONFIG_AEABI=y
>  # CONFIG_CMD_ARM_CPUINFO is not set
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_EXPERIMENTAL=y
>  CONFIG_PROMPT="USB-9G20:"
>  CONFIG_LONGHELP=y
>  CONFIG_GLOB=y
> @@ -11,6 +12,8 @@ CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
>  CONFIG_MENU=y
> +# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>  CONFIG_PARTITION=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
> @@ -64,7 +67,8 @@ CONFIG_NAND=y
>  CONFIG_NAND_ATMEL=y
>  CONFIG_UBI=y
>  CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> -CONFIG_ZLIB=y
> -- 
> 1.7.7

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2012-01-04  9:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-04  9:03 Jean-Christophe PLAGNIOL-VILLARD
2012-01-04  9:06 ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120104090626.GC18008@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox