* Pandaboard kernel 3.2.1 loaded from barebox
@ 2012-01-27 7:35 Belisko Marek
2012-01-27 10:42 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Belisko Marek @ 2012-01-27 7:35 UTC (permalink / raw)
To: barebox
Hi,
I'm trying execute (stable 3.2.1 kernel) zImage for pandaboard but
after command bootz boot/zImage it just stuck:
barebox@Texas Instrument's Panda:/ bootz boot/zImage
loaded zImage from boot/zImage with size 3314936
commandline: console=ttyO2,115200
arch_number: 2791
Uncompressing Linux... done, booting the kernel.
Same with loadm uImage.
I have DEBUG_LL enabled in kernel but no message so far after that.
Maybe this is not barebox bug just want to be sure ;).
It's different platform but it's not related?
http://lists.infradead.org/pipermail/barebox/2012-January/005923.html
version: barebox 2012.01.
Thanks in advance,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pandaboard kernel 3.2.1 loaded from barebox
2012-01-27 7:35 Pandaboard kernel 3.2.1 loaded from barebox Belisko Marek
@ 2012-01-27 10:42 ` Sascha Hauer
2012-01-29 13:16 ` Belisko Marek
0 siblings, 1 reply; 4+ messages in thread
From: Sascha Hauer @ 2012-01-27 10:42 UTC (permalink / raw)
To: Belisko Marek; +Cc: barebox
On Fri, Jan 27, 2012 at 08:35:02AM +0100, Belisko Marek wrote:
> Hi,
>
> I'm trying execute (stable 3.2.1 kernel) zImage for pandaboard but
> after command bootz boot/zImage it just stuck:
> barebox@Texas Instrument's Panda:/ bootz boot/zImage
> loaded zImage from boot/zImage with size 3314936
> commandline: console=ttyO2,115200
> arch_number: 2791
> Uncompressing Linux... done, booting the kernel.
>
> Same with loadm uImage.
> I have DEBUG_LL enabled in kernel but no message so far after that.
>
> Maybe this is not barebox bug just want to be sure ;).
> It's different platform but it's not related?
> http://lists.infradead.org/pipermail/barebox/2012-January/005923.html
>
> version: barebox 2012.01.
Same here. enable earlyprintk in the kernel and pass earlyprintk on the
commandline, then you'll get the following. I don't know what's
happening here. It could be that the kernel makes some assumptions how
some hardware is initialized.
Sascha
barebox@Texas Instrument's Panda:/ boot
warning: No MAC address set. Using random address 82:CD:38:1E:06:1B
phy0: Link is up - 100/Full
T DHCP client bound to address 192.168.24.21
TFTP from server 192.168.23.2 ('sha-zImage-panda' -> '/image')
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##############################################################
booting kernel from /image
commandline: console=ttyO2,115200 earlyprintk ip=dhcp root=/dev/nfs nfsroot=:/home/sha/nfsroot/panda,v3,tcp noinitrd
arch_number: 2791
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.2.0 (sha@dude) (gcc version 4.5.2 (OSELAS.Toolchain-2011.03.1) ) #4 SMP Fri Jan 27 11:37:13 CET 2012
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region overlap).
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c11f6000 s10112 r8192 d14464 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072
[ 0.000000] Kernel command line: console=ttyO2,115200 earlyprintk ip=dhcp root=/dev/nfs nfsroot=:/home/sha/nfsroot/panda,v3,tcp noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 768MB = 768MB total
[ 0.000000] Memory: 767192k/767192k available, 19240k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05c0288 (5857 kB)
[ 0.000000] .init : 0xc05c1000 - 0xc060d780 ( 306 kB)
[ 0.000000] .data : 0xc060e000 - 0xc0694950 ( 539 kB)
[ 0.000000] .bss : 0xc0694974 - 0xc0be8f00 (5458 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.056945] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[ 0.129821] pid_max: default: 32768 minimum: 301
[ 0.135437] Security Framework initialized
[ 0.140014] Mount-cache hash table entries: 512
[ 0.149475] CPU: Testing write buffer coherency: ok
[ 0.155670] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.161712] Calibrating local timer... 292.71MHz.
[ 0.206359] L310 cache controller enabled
[ 0.210571] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.222778] CPU1: Booted secondary processor
[ 0.252075] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.252105] CPU1: Unknown IPI message 0x1
[ 0.252288] Brought up 2 CPUs
[ 0.252319] SMP: Total of 2 processors activated (2359.07 BogoMIPS).
[ 0.288604] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.298919] omap_hwmod: dmm: _wait_target_disable failed
[ 0.307128] omap_hwmod: emif_fw: _wait_target_disable failed
[ 0.315704] omap_hwmod: l3_main_1: _wait_target_disable failed
[ 0.324462] omap_hwmod: l3_main_2: _wait_target_disable failed
[ 0.333251] omap_hwmod: l4_abe: _wait_target_disable failed
[ 0.341735] omap_hwmod: l4_cfg: _wait_target_disable failed
[ 0.350219] omap_hwmod: l4_per: _wait_target_disable failed
[ 0.359222] omap_hwmod: l4_wkup: _wait_target_disable failed
[ 0.367858] omap_hwmod: dma_system: _wait_target_disable failed
[ 0.376800] omap_hwmod: dss_core: _wait_target_disable failed
[ 0.385467] omap_hwmod: dss_dispc: _wait_target_disable failed
[ 0.394226] omap_hwmod: dss_dsi1: _wait_target_disable failed
[ 0.402893] omap_hwmod: dss_dsi2: _wait_target_disable failed
[ 0.411560] omap_hwmod: dss_hdmi: _wait_target_disable failed
[ 0.420257] omap_hwmod: dss_rfbi: _wait_target_disable failed
[ 0.428924] omap_hwmod: dss_venc: _wait_target_disable failed
[ 0.438873] omap_hwmod: mailbox: _wait_target_disable failed
[ 0.447570] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.455688] omap_hwmod: spinlock: _wait_target_disable failed
[ 0.467590] print_constraints: dummy:
[ 0.472930] NET: Registered protocol family 16
[ 0.478363] GPMC revision 6.0
[ 0.481597] ------------[ cut here ]------------
[ 0.486419] Kernel BUG at c05ca108 [verbose debug info unavailable]
[ 0.492950] Internal error: Oops - undefined instruction: 0 [#1] SMP
[ 0.499572] Modules linked in:
[ 0.502807] CPU: 0 Not tainted (3.2.0 #4)
[ 0.507385] PC is at gpmc_init+0x1dc/0x2dc
[ 0.511688] LR is at gpmc_init+0x1d4/0x2dc
[ 0.515960] pc : [<c05ca108>] lr : [<c05ca100>] psr: a0000013
[ 0.515991] sp : ef833f60 ip : 00000000 fp : 00ffffff
[ 0.527954] r10: c0695000 r9 : c0695000 r8 : 00000000
[ 0.533416] r7 : 00000078 r6 : fffffff0 r5 : c0694fdc r4 : 00000000
[ 0.540191] r3 : ef831380 r2 : 00000000 r1 : 00000450 r0 : c062a634
[ 0.546997] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 0.554595] Control: 10c53c7d Table: 8000404a DAC: 00000017
[ 0.560577] Process swapper/0 (pid: 1, stack limit = 0xef8322f8)
[ 0.566833] Stack: (0xef833f60 to 0xef834000)
[ 0.571411] 3f60: 00000000 00000000 c0695000 00000034 6d5f336c c0609f6c c0694980 ef832000
[ 0.579925] 3f80: 00000000 00000000 00000000 c05c9f2c 00000000 c0008770 c009b038 c0617880
[ 0.588409] 3fa0: 0000009f c05c9f2c 0000009f 00000013 00000000 35319174 00000039 00000000
[ 0.596923] 3fc0: c066a85c c0609f6c c060a414 c0014354 00000013 00000000 00000000 00000000
[ 0.605407] 3fe0: 00000000 c05c1870 ef831380 00000000 c05c17e4 c0014354 00000000 fffffff7
[ 0.613922] [<c05ca108>] (gpmc_init+0x1dc/0x2dc) from [<c0008770>] (do_one_initcall+0x34/0x180)
[ 0.622955] [<c0008770>] (do_one_initcall+0x34/0x180) from [<c05c1870>] (kernel_init+0x8c/0x138)
[ 0.632110] [<c05c1870>] (kernel_init+0x8c/0x138) from [<c0014354>] (kernel_thread_exit+0x0/0x8)
[ 0.641235] Code: e59f00e0 ebf93996 e3560000 aa000000 (e7f001f2)
[ 0.647644] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.652496] Kernel panic - not syncing: Attempted to kill init!
[ 0.658691] CPU1: stopping
[ 0.661590] [<c001a49c>] (unwind_backtrace+0x0/0xf4) from [<c00186ac>] (handle_IPI+0x11c/0x148)
[ 0.670623] [<c00186ac>] (handle_IPI+0x11c/0x148) from [<c041899c>] (__irq_svc+0x3c/0xe0)
[ 0.679138] [<c041899c>] (__irq_svc+0x3c/0xe0) from [<c00143c0>] (default_idle+0x30/0x38)
[ 0.687652] [<c00143c0>] (default_idle+0x30/0x38) from [<c00145e8>] (cpu_idle+0xc0/0x104)
[ 0.696136] [<c00145e8>] (cpu_idle+0xc0/0x104) from [<80411534>] (0x80411534)
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pandaboard kernel 3.2.1 loaded from barebox
2012-01-27 10:42 ` Sascha Hauer
@ 2012-01-29 13:16 ` Belisko Marek
2012-01-30 10:51 ` Sascha Hauer
0 siblings, 1 reply; 4+ messages in thread
From: Belisko Marek @ 2012-01-29 13:16 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hi,
On Fri, Jan 27, 2012 at 11:42 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Fri, Jan 27, 2012 at 08:35:02AM +0100, Belisko Marek wrote:
>> Hi,
>>
>> I'm trying execute (stable 3.2.1 kernel) zImage for pandaboard but
>> after command bootz boot/zImage it just stuck:
>> barebox@Texas Instrument's Panda:/ bootz boot/zImage
>> loaded zImage from boot/zImage with size 3314936
>> commandline: console=ttyO2,115200
>> arch_number: 2791
>> Uncompressing Linux... done, booting the kernel.
>>
>> Same with loadm uImage.
>> I have DEBUG_LL enabled in kernel but no message so far after that.
>>
>> Maybe this is not barebox bug just want to be sure ;).
>> It's different platform but it's not related?
>> http://lists.infradead.org/pipermail/barebox/2012-January/005923.html
>>
>> version: barebox 2012.01.
>
> Same here. enable earlyprintk in the kernel and pass earlyprintk on the
> commandline, then you'll get the following. I don't know what's
> happening here. It could be that the kernel makes some assumptions how
> some hardware is initialized.
Thanks for hint. I've check beagle board and beagle board uses
gpmc_generic_init(0x10)
Following patch fix booting on Pandaboard (not sure if 0x00 is OK but
u-boot use the same):
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index be3ad77..045b5c5 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <sizes.h>
#include <asm/mmu.h>
+#include <mach/gpmc.h>
#include <mach/gpio.h>
#include <environment.h>
#include <mach/xload.h>
@@ -132,7 +133,9 @@ static int panda_devices_init(void)
/* enable clocks */
sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
}
-
+#ifdef CONFIG_OMAP_GPMC
+ gpmc_generic_init(0x00);
+#endif
add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
IORESOURCE_MEM, NULL);
panda_ehci_init();
Marek
>
> Sascha
>
>
> barebox@Texas Instrument's Panda:/ boot
> warning: No MAC address set. Using random address 82:CD:38:1E:06:1B
> phy0: Link is up - 100/Full
> T DHCP client bound to address 192.168.24.21
> TFTP from server 192.168.23.2 ('sha-zImage-panda' -> '/image')
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ##############################################################
> booting kernel from /image
> commandline: console=ttyO2,115200 earlyprintk ip=dhcp root=/dev/nfs nfsroot=:/home/sha/nfsroot/panda,v3,tcp noinitrd
> arch_number: 2791
> Uncompressing Linux... done, booting the kernel.
> [ 0.000000] Booting Linux on physical CPU 0
> [ 0.000000] Linux version 3.2.0 (sha@dude) (gcc version 4.5.2 (OSELAS.Toolchain-2011.03.1) ) #4 SMP Fri Jan 27 11:37:13 CET 2012
> [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] Machine: OMAP4 Panda board
> [ 0.000000] bootconsole [earlycon0] enabled
> [ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region overlap).
> [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
> [ 0.000000] OMAP4430 ES2.1
> [ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
> [ 0.000000] PERCPU: Embedded 8 pages/cpu @c11f6000 s10112 r8192 d14464 u32768
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072
> [ 0.000000] Kernel command line: console=ttyO2,115200 earlyprintk ip=dhcp root=/dev/nfs nfsroot=:/home/sha/nfsroot/panda,v3,tcp noinitrd
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Memory: 768MB = 768MB total
> [ 0.000000] Memory: 767192k/767192k available, 19240k reserved, 0K highmem
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc05c0288 (5857 kB)
> [ 0.000000] .init : 0xc05c1000 - 0xc060d780 ( 306 kB)
> [ 0.000000] .data : 0xc060e000 - 0xc0694950 ( 539 kB)
> [ 0.000000] .bss : 0xc0694974 - 0xc0be8f00 (5458 kB)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:410
> [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
> [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
> [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
> [ 0.000000] Console: colour dummy device 80x30
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 3695 kB
> [ 0.000000] per task-struct memory footprint: 1152 bytes
> [ 0.056945] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
> [ 0.129821] pid_max: default: 32768 minimum: 301
> [ 0.135437] Security Framework initialized
> [ 0.140014] Mount-cache hash table entries: 512
> [ 0.149475] CPU: Testing write buffer coherency: ok
> [ 0.155670] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.161712] Calibrating local timer... 292.71MHz.
> [ 0.206359] L310 cache controller enabled
> [ 0.210571] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
> [ 0.222778] CPU1: Booted secondary processor
> [ 0.252075] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.252105] CPU1: Unknown IPI message 0x1
> [ 0.252288] Brought up 2 CPUs
> [ 0.252319] SMP: Total of 2 processors activated (2359.07 BogoMIPS).
> [ 0.288604] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
> [ 0.298919] omap_hwmod: dmm: _wait_target_disable failed
> [ 0.307128] omap_hwmod: emif_fw: _wait_target_disable failed
> [ 0.315704] omap_hwmod: l3_main_1: _wait_target_disable failed
> [ 0.324462] omap_hwmod: l3_main_2: _wait_target_disable failed
> [ 0.333251] omap_hwmod: l4_abe: _wait_target_disable failed
> [ 0.341735] omap_hwmod: l4_cfg: _wait_target_disable failed
> [ 0.350219] omap_hwmod: l4_per: _wait_target_disable failed
> [ 0.359222] omap_hwmod: l4_wkup: _wait_target_disable failed
> [ 0.367858] omap_hwmod: dma_system: _wait_target_disable failed
> [ 0.376800] omap_hwmod: dss_core: _wait_target_disable failed
> [ 0.385467] omap_hwmod: dss_dispc: _wait_target_disable failed
> [ 0.394226] omap_hwmod: dss_dsi1: _wait_target_disable failed
> [ 0.402893] omap_hwmod: dss_dsi2: _wait_target_disable failed
> [ 0.411560] omap_hwmod: dss_hdmi: _wait_target_disable failed
> [ 0.420257] omap_hwmod: dss_rfbi: _wait_target_disable failed
> [ 0.428924] omap_hwmod: dss_venc: _wait_target_disable failed
> [ 0.438873] omap_hwmod: mailbox: _wait_target_disable failed
> [ 0.447570] omap_hwmod: mcpdm: cannot be enabled (3)
> [ 0.455688] omap_hwmod: spinlock: _wait_target_disable failed
> [ 0.467590] print_constraints: dummy:
> [ 0.472930] NET: Registered protocol family 16
> [ 0.478363] GPMC revision 6.0
> [ 0.481597] ------------[ cut here ]------------
> [ 0.486419] Kernel BUG at c05ca108 [verbose debug info unavailable]
> [ 0.492950] Internal error: Oops - undefined instruction: 0 [#1] SMP
> [ 0.499572] Modules linked in:
> [ 0.502807] CPU: 0 Not tainted (3.2.0 #4)
> [ 0.507385] PC is at gpmc_init+0x1dc/0x2dc
> [ 0.511688] LR is at gpmc_init+0x1d4/0x2dc
> [ 0.515960] pc : [<c05ca108>] lr : [<c05ca100>] psr: a0000013
> [ 0.515991] sp : ef833f60 ip : 00000000 fp : 00ffffff
> [ 0.527954] r10: c0695000 r9 : c0695000 r8 : 00000000
> [ 0.533416] r7 : 00000078 r6 : fffffff0 r5 : c0694fdc r4 : 00000000
> [ 0.540191] r3 : ef831380 r2 : 00000000 r1 : 00000450 r0 : c062a634
> [ 0.546997] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
> [ 0.554595] Control: 10c53c7d Table: 8000404a DAC: 00000017
> [ 0.560577] Process swapper/0 (pid: 1, stack limit = 0xef8322f8)
> [ 0.566833] Stack: (0xef833f60 to 0xef834000)
> [ 0.571411] 3f60: 00000000 00000000 c0695000 00000034 6d5f336c c0609f6c c0694980 ef832000
> [ 0.579925] 3f80: 00000000 00000000 00000000 c05c9f2c 00000000 c0008770 c009b038 c0617880
> [ 0.588409] 3fa0: 0000009f c05c9f2c 0000009f 00000013 00000000 35319174 00000039 00000000
> [ 0.596923] 3fc0: c066a85c c0609f6c c060a414 c0014354 00000013 00000000 00000000 00000000
> [ 0.605407] 3fe0: 00000000 c05c1870 ef831380 00000000 c05c17e4 c0014354 00000000 fffffff7
> [ 0.613922] [<c05ca108>] (gpmc_init+0x1dc/0x2dc) from [<c0008770>] (do_one_initcall+0x34/0x180)
> [ 0.622955] [<c0008770>] (do_one_initcall+0x34/0x180) from [<c05c1870>] (kernel_init+0x8c/0x138)
> [ 0.632110] [<c05c1870>] (kernel_init+0x8c/0x138) from [<c0014354>] (kernel_thread_exit+0x0/0x8)
> [ 0.641235] Code: e59f00e0 ebf93996 e3560000 aa000000 (e7f001f2)
> [ 0.647644] ---[ end trace 1b75b31a2719ed1c ]---
> [ 0.652496] Kernel panic - not syncing: Attempted to kill init!
> [ 0.658691] CPU1: stopping
> [ 0.661590] [<c001a49c>] (unwind_backtrace+0x0/0xf4) from [<c00186ac>] (handle_IPI+0x11c/0x148)
> [ 0.670623] [<c00186ac>] (handle_IPI+0x11c/0x148) from [<c041899c>] (__irq_svc+0x3c/0xe0)
> [ 0.679138] [<c041899c>] (__irq_svc+0x3c/0xe0) from [<c00143c0>] (default_idle+0x30/0x38)
> [ 0.687652] [<c00143c0>] (default_idle+0x30/0x38) from [<c00145e8>] (cpu_idle+0xc0/0x104)
> [ 0.696136] [<c00145e8>] (cpu_idle+0xc0/0x104) from [<80411534>] (0x80411534)
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Pandaboard kernel 3.2.1 loaded from barebox
2012-01-29 13:16 ` Belisko Marek
@ 2012-01-30 10:51 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2012-01-30 10:51 UTC (permalink / raw)
To: Belisko Marek; +Cc: barebox
On Sun, Jan 29, 2012 at 02:16:00PM +0100, Belisko Marek wrote:
> Hi,
>
> On Fri, Jan 27, 2012 at 11:42 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> > On Fri, Jan 27, 2012 at 08:35:02AM +0100, Belisko Marek wrote:
> >> Hi,
> >>
> >> I'm trying execute (stable 3.2.1 kernel) zImage for pandaboard but
> >> after command bootz boot/zImage it just stuck:
> >> barebox@Texas Instrument's Panda:/ bootz boot/zImage
> >> loaded zImage from boot/zImage with size 3314936
> >> commandline: console=ttyO2,115200
> >> arch_number: 2791
> >> Uncompressing Linux... done, booting the kernel.
> >>
> >> Same with loadm uImage.
> >> I have DEBUG_LL enabled in kernel but no message so far after that.
> >>
> >> Maybe this is not barebox bug just want to be sure ;).
> >> It's different platform but it's not related?
> >> http://lists.infradead.org/pipermail/barebox/2012-January/005923.html
> >>
> >> version: barebox 2012.01.
> >
> > Same here. enable earlyprintk in the kernel and pass earlyprintk on the
> > commandline, then you'll get the following. I don't know what's
> > happening here. It could be that the kernel makes some assumptions how
> > some hardware is initialized.
> Thanks for hint. I've check beagle board and beagle board uses
> gpmc_generic_init(0x10)
> Following patch fix booting on Pandaboard (not sure if 0x00 is OK but
> u-boot use the same):
>
> diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
> index be3ad77..045b5c5 100644
> --- a/arch/arm/boards/panda/board.c
> +++ b/arch/arm/boards/panda/board.c
> @@ -17,6 +17,7 @@
> #include <linux/err.h>
> #include <sizes.h>
> #include <asm/mmu.h>
> +#include <mach/gpmc.h>
> #include <mach/gpio.h>
> #include <environment.h>
> #include <mach/xload.h>
> @@ -132,7 +133,9 @@ static int panda_devices_init(void)
> /* enable clocks */
> sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
> }
> -
> +#ifdef CONFIG_OMAP_GPMC
> + gpmc_generic_init(0x00);
> +#endif
Building a barebox which can't start the kernel does not make much
sense, so OMAP_GPMC should not be user visible. We should remove the
prompt for OMAP_GPMC and also remove all ifdefs around gpmc_generic_init()
in the board files.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-01-30 10:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-27 7:35 Pandaboard kernel 3.2.1 loaded from barebox Belisko Marek
2012-01-27 10:42 ` Sascha Hauer
2012-01-29 13:16 ` Belisko Marek
2012-01-30 10:51 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox