mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller
Date: Wed, 15 Feb 2012 09:32:02 +0100	[thread overview]
Message-ID: <20120215083202.GX3852@pengutronix.de> (raw)
In-Reply-To: <1329224294-31475-1-git-send-email-robert.jarzmik@free.fr>

Hi Robert,

On Tue, Feb 14, 2012 at 01:58:13PM +0100, Robert Jarzmik wrote:
> Add PXA embedded pulse width modulator support. The PWM can
> generate signals from 49.6kHz to 1.625MHz.
> The driver is for pxa2xx family. The pxa3xx was not handled yet.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
>  arch/arm/mach-pxa/Makefile                |    1 +
>  arch/arm/mach-pxa/devices.c               |    5 +
>  arch/arm/mach-pxa/include/mach/clock.h    |    1 +
>  arch/arm/mach-pxa/include/mach/devices.h  |    2 +-
>  arch/arm/mach-pxa/include/mach/regs-pwm.h |   20 +++
>  arch/arm/mach-pxa/speed-pxa27x.c          |    5 +
>  drivers/pwm/Kconfig                       |    6 +
>  drivers/pwm/Makefile                      |    1 +
>  drivers/pwm/pxa_pwm.c                     |  219 +++++++++++++++++++++++++++++
>  9 files changed, 259 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/include/mach/regs-pwm.h
>  create mode 100644 drivers/pwm/pxa_pwm.c
> 
> +
> +static int __init pxa_pwm_register_vars(struct device_d *dev,
> +					struct pxa_pwm_chip *pxa_pwm)
> +{
> +	int ret;
> +
> +	ret = dev_add_param(dev, "duty_ns", set_duty_ns, NULL, 0);
> +	if (!ret)
> +		ret = dev_add_param(dev, "period_ns", set_period_ns, NULL, 0);
> +	if (!ret)
> +		ret = dev_add_param(dev, "enable", set_enable, NULL, 0);
> +	if (!ret)
> +		ret = dev_set_param(dev, "enable", 0);
> +	return ret;
> +}

Nice to make the pwms accessible from the command line, but shouldn't
this be in the core? From what I see all we have to do is to add
duty_ns and period_ns to struct pwm_chip.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-02-15  8:32 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-31  9:36 [PATCH] Add pwm core support Sascha Hauer
2012-02-01  8:20 ` Robert Jarzmik
2012-02-01 22:42 ` [PATCH] drivers/pwm: add PXA pulse width modulator controller Robert Jarzmik
2012-02-03  9:52   ` Sascha Hauer
2012-02-03 15:39     ` Robert Jarzmik
2012-02-08 15:26       ` Robert Jarzmik
2012-02-09  8:10         ` Sascha Hauer
2012-02-09 11:50           ` Robert Jarzmik
2012-02-09 13:44             ` Sascha Hauer
2012-02-09 14:30               ` Robert Jarzmik
2012-02-14 12:58             ` [PATCH V2 1/2] " Robert Jarzmik
2012-02-14 12:58               ` [PATCH V2 2/2] drivers/video: remove pxafb enable on load Robert Jarzmik
2012-02-15  8:32               ` Sascha Hauer [this message]
2012-02-15 11:22                 ` [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller Robert Jarzmik
2012-02-15 15:21                 ` Robert Jarzmik
2012-02-16  7:40                   ` Sascha Hauer
2012-02-16 18:23                     ` [PATCH V3 1/3] drivers/pwm: add duty_ns and period_ns to core pwm chip Robert Jarzmik
2012-02-16 18:23                       ` [PATCH V3 2/3] drivers/pwm: add PXA pulse width modulator controller Robert Jarzmik
2012-02-16 18:23                       ` [PATCH V3 3/3] drivers/video: remove pxafb enable on load Robert Jarzmik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120215083202.GX3852@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox