mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH V3] arm/mach-pxa: add mioa701 board
Date: Wed, 29 Feb 2012 08:41:53 +0100	[thread overview]
Message-ID: <20120229074153.GS3852@pengutronix.de> (raw)
In-Reply-To: <1330436471-716-1-git-send-email-robert.jarzmik@free.fr>

On Tue, Feb 28, 2012 at 02:41:11PM +0100, Robert Jarzmik wrote:
> Add Mitac MioA701 board initial support.
> The support provides basic boot and :
>  - a console over USB (serial gadget).
>  - the SD card support
>  - the MTD docg3 support
>  - the LCD support
> 
> Add a check in the default environment for a barebox.env
> file on the first partition (FAT). If the file exists,
> source it instead of the normal boot procedure.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Applied, thanks

Sascha

> 
> ---
> Since V1:
>  - taken into account Marc's review
>  - added SD+MTD
> 
> Since V2:
>  - added MFP setup for pxafb
>  - added pwm support for backlight
> ---
>  arch/arm/Makefile                                |    1 +
>  arch/arm/boards/mioa701/Makefile                 |    1 +
>  arch/arm/boards/mioa701/board.c                  |  278 ++++++++++++++++++++++
>  arch/arm/boards/mioa701/config.h                 |   22 ++
>  arch/arm/boards/mioa701/env/bin/barebox_update   |    5 +
>  arch/arm/boards/mioa701/env/bin/init             |   35 +++
>  arch/arm/boards/mioa701/env/bin/mtd_env_override |    4 +
>  arch/arm/boards/mioa701/env/bin/sdcard_override  |   16 ++
>  arch/arm/boards/mioa701/env/config               |    5 +
>  arch/arm/boards/mioa701/mioa701.h                |   81 +++++++
>  arch/arm/configs/mioa701_defconfig               |   62 +++++
>  arch/arm/mach-pxa/Kconfig                        |   18 ++
>  12 files changed, 528 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boards/mioa701/Makefile
>  create mode 100644 arch/arm/boards/mioa701/board.c
>  create mode 100644 arch/arm/boards/mioa701/config.h
>  create mode 100644 arch/arm/boards/mioa701/env/bin/barebox_update
>  create mode 100644 arch/arm/boards/mioa701/env/bin/init
>  create mode 100644 arch/arm/boards/mioa701/env/bin/mtd_env_override
>  create mode 100644 arch/arm/boards/mioa701/env/bin/sdcard_override
>  create mode 100644 arch/arm/boards/mioa701/env/config
>  create mode 100644 arch/arm/boards/mioa701/mioa701.h
>  create mode 100644 arch/arm/configs/mioa701_defconfig
> 
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 9926280..b28a5b2 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -83,6 +83,7 @@ board-$(CONFIG_MACH_FREESCALE_MX25_3STACK)	:= freescale-mx25-3-stack
>  board-$(CONFIG_MACH_FREESCALE_MX35_3STACK)	:= freescale-mx35-3-stack
>  board-$(CONFIG_MACH_IMX21ADS)			:= imx21ads
>  board-$(CONFIG_MACH_IMX27ADS)			:= imx27ads
> +board-$(CONFIG_MACH_MIOA701)			:= mioa701
>  board-$(CONFIG_MACH_MMCCPU)			:= mmccpu
>  board-$(CONFIG_MACH_MX1ADS)			:= mx1ads
>  board-$(CONFIG_MACH_NOMADIK_8815NHK)		:= nhk8815
> diff --git a/arch/arm/boards/mioa701/Makefile b/arch/arm/boards/mioa701/Makefile
> new file mode 100644
> index 0000000..dcfc293
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/Makefile
> @@ -0,0 +1 @@
> +obj-y += board.o
> diff --git a/arch/arm/boards/mioa701/board.c b/arch/arm/boards/mioa701/board.c
> new file mode 100644
> index 0000000..6a67a03
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/board.c
> @@ -0,0 +1,278 @@
> +/*
> + * (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <environment.h>
> +#include <fs.h>
> +#include <init.h>
> +#include <partition.h>
> +#include <led.h>
> +#include <gpio.h>
> +#include <pwm.h>
> +
> +#include <mach/devices.h>
> +#include <mach/mfp-pxa27x.h>
> +#include <mach/pxa-regs.h>
> +#include <mach/udc_pxa2xx.h>
> +#include <mach/mci_pxa2xx.h>
> +
> +#include <asm/armlinux.h>
> +#include <asm/io.h>
> +#include <generated/mach-types.h>
> +#include <asm/mmu.h>
> +
> +#include "mioa701.h"
> +
> +/*
> + * LTM0305A776C LCD panel timings
> + *
> + * see:
> + *  - the LTM0305A776C datasheet,
> + *  - and the PXA27x Programmers' manual
> + */
> +static struct pxafb_videomode mioa701_ltm0305a776c = {
> +	{
> +		.pixclock		= 220000,	/* CLK=4.545 MHz */
> +		.xres			= 240,
> +		.yres			= 320,
> +		.hsync_len		= 4,
> +		.vsync_len		= 2,
> +		.left_margin		= 6,
> +		.right_margin		= 4,
> +		.upper_margin		= 5,
> +		.lower_margin		= 3,
> +	},
> +	.bpp = 16,
> +};
> +
> +static void mioa701_lcd_power(int on)
> +{
> +	gpio_set_value(GPIO87_LCD_POWER, on);
> +}
> +
> +static void mioa701_lcd_backlight(int on)
> +{
> +	struct pwm_device *pwm0 = pwm_request("pxa_pwm0");
> +
> +	/*
> +	 * The backlight has a base frequency of 250kHz (<=> 4 ms).
> +	 */
> +	if (on) {
> +		pwm_enable(pwm0);
> +		pwm_config(pwm0, 2000 * 1024, 4000 * 1024);
> +	} else {
> +		pwm_disable(pwm0);
> +	}
> +	pwm_free(pwm0);
> +}
> +
> +static struct pxafb_platform_data mioa701_pxafb_info = {
> +	.mode			= &mioa701_ltm0305a776c,
> +	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
> +	.lcd_power		= mioa701_lcd_power,
> +	.backlight_power	= mioa701_lcd_backlight,
> +};
> +
> +#define MIO_LED(_name, _gpio) \
> +	{ .gpio = _gpio, .active_low = 1, .led = { .name = #_name, } }
> +static struct gpio_led leds[] = {
> +	MIO_LED(charging, GPIO10_LED_nCharging),
> +	MIO_LED(blue, GPIO97_LED_nBlue),
> +	MIO_LED(orange, GPIO98_LED_nOrange),
> +	MIO_LED(vibra, GPIO82_LED_nVibra),
> +	MIO_LED(keyboard, GPIO115_LED_nKeyboard),
> +};
> +
> +
> +static int is_usb_connected(void)
> +{
> +	return !gpio_get_value(GPIO13_nUSB_DETECT);
> +}
> +
> +static struct pxa2xx_udc_mach_info mioa701_udc_info = {
> +	.udc_is_connected = is_usb_connected,
> +	.gpio_pullup	  = GPIO22_USB_ENABLE,
> +};
> +
> +static struct pxamci_platform_data mioa701_mmc_info = {
> +	.gpio_power = GPIO91_SDIO_EN,
> +};
> +
> +static int mioa701_devices_init(void)
> +{
> +	int i;
> +	void *docg3_iospace;
> +
> +	pxa_add_pwm((void *)0x40b00000, 0);
> +	pxa_add_fb((void *)0x44000000, &mioa701_pxafb_info);
> +	pxa_add_mmc((void *)0x41100000, -1, &mioa701_mmc_info);
> +	docg3_iospace = map_io_sections(0x0, (void *)0xe0000000, 0x2000);
> +	add_generic_device("docg3", -1, NULL, (ulong) docg3_iospace, 0x2000,
> +			   IORESOURCE_MEM, NULL);
> +	armlinux_set_bootparams((void *)0xa0000100);
> +	armlinux_set_architecture(MACH_TYPE_MIOA701);
> +
> +	for (i = 0; i < ARRAY_SIZE(leds); i++)
> +		led_gpio_register(&leds[i]);
> +	add_generic_device("pxa27x-udc", 0, NULL, 0x40600000,
> +			   1024, IORESOURCE_MEM, &mioa701_udc_info);
> +	return 0;
> +}
> +
> +device_initcall(mioa701_devices_init);
> +
> +static unsigned long mioa701_pin_config[] = {
> +	/* Mio global */
> +	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
> +	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
> +	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
> +	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
> +
> +	/* Backlight PWM 0 */
> +	GPIO16_PWM0_OUT,
> +
> +	/* LCD */
> +	GPIOxx_LCD_TFT_16BPP,
> +	MIO_CFG_OUT(GPIO87_LCD_POWER, AF0, DRIVE_LOW),
> +
> +	/* MMC */
> +	GPIO32_MMC_CLK,
> +	GPIO92_MMC_DAT_0,
> +	GPIO109_MMC_DAT_1,
> +	GPIO110_MMC_DAT_2,
> +	GPIO111_MMC_DAT_3,
> +	GPIO112_MMC_CMD,
> +	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
> +	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
> +	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
> +
> +	/* USB */
> +	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
> +	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
> +
> +	/* QCI */
> +	GPIO12_CIF_DD_7,
> +	GPIO17_CIF_DD_6,
> +	GPIO50_CIF_DD_3,
> +	GPIO51_CIF_DD_2,
> +	GPIO52_CIF_DD_4,
> +	GPIO53_CIF_MCLK,
> +	GPIO54_CIF_PCLK,
> +	GPIO55_CIF_DD_1,
> +	GPIO81_CIF_DD_0,
> +	GPIO82_CIF_DD_5,
> +	GPIO84_CIF_FV,
> +	GPIO85_CIF_LV,
> +
> +	/* Bluetooth */
> +	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
> +	GPIO44_BTUART_CTS,
> +	GPIO42_BTUART_RXD,
> +	GPIO45_BTUART_RTS,
> +	GPIO43_BTUART_TXD,
> +	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
> +
> +	/* GPS */
> +	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
> +	GPIO46_STUART_RXD,
> +	GPIO47_STUART_TXD,
> +
> +	/* GSM */
> +	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
> +	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
> +	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
> +	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
> +	GPIO34_FFUART_RXD,
> +	GPIO35_FFUART_CTS,
> +	GPIO36_FFUART_DCD,
> +	GPIO37_FFUART_DSR,
> +	GPIO39_FFUART_TXD,
> +	GPIO40_FFUART_DTR,
> +	GPIO41_FFUART_RTS,
> +
> +	/* Sound */
> +	GPIO28_AC97_BITCLK,
> +	GPIO29_AC97_SDATA_IN_0,
> +	GPIO30_AC97_SDATA_OUT,
> +	GPIO31_AC97_SYNC,
> +	GPIO89_AC97_SYSCLK,
> +	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
> +
> +	/* Leds */
> +	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
> +	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
> +
> +	/* Keyboard */
> +	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
> +	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
> +	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
> +	GPIO100_KP_MKIN_0,
> +	GPIO101_KP_MKIN_1,
> +	GPIO102_KP_MKIN_2,
> +	GPIO103_KP_MKOUT_0,
> +	GPIO104_KP_MKOUT_1,
> +	GPIO105_KP_MKOUT_2,
> +
> +	/* I2C */
> +	GPIO117_I2C_SCL,
> +	GPIO118_I2C_SDA,
> +
> +	/* Unknown */
> +	MFP_CFG_IN(GPIO20, AF0),
> +	MFP_CFG_IN(GPIO21, AF0),
> +	MFP_CFG_IN(GPIO33, AF0),
> +	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
> +	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
> +	MFP_CFG_IN(GPIO96, AF0),
> +	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
> +};
> +
> +static int mioa701_coredevice_init(void)
> +{
> +	unsigned int cclk;
> +	/* route pins */
> +	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
> +
> +	CCCR = CCCR_A | 0x20110;
> +	cclk = 0x02;
> +	asm volatile("mcr p14, 0, %0, c6, c0, 0 @ set CCLK"
> +	  : : "r" (cclk) : "cc");
> +
> +	return 0;
> +}
> +coredevice_initcall(mioa701_coredevice_init);
> +
> +static int mioa701_mem_init(void)
> +{
> +	arm_add_mem_device("ram0", 0xa0000000, 64 * 1024 * 1024);
> +	return 0;
> +}
> +mem_initcall(mioa701_mem_init);
> diff --git a/arch/arm/boards/mioa701/config.h b/arch/arm/boards/mioa701/config.h
> new file mode 100644
> index 0000000..390aa30
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/config.h
> @@ -0,0 +1,22 @@
> +/*
> + * (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#endif  /* __CONFIG_H */
> diff --git a/arch/arm/boards/mioa701/env/bin/barebox_update b/arch/arm/boards/mioa701/env/bin/barebox_update
> new file mode 100644
> index 0000000..564549b
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/bin/barebox_update
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +
> +# Page+OOB specific partitions
> +addpart /dev/mtdraw0 1081344@3649536(msipl)
> +addpart /dev/mtdraw0 270336@3649536(barebox)
> diff --git a/arch/arm/boards/mioa701/env/bin/init b/arch/arm/boards/mioa701/env/bin/init
> new file mode 100644
> index 0000000..8a54da0
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/bin/init
> @@ -0,0 +1,35 @@
> +#!/bin/sh
> +
> +PATH=/env/bin
> +export PATH
> +
> +. /env/config
> +addpart /dev/mtd0 $mtdparts
> +
> +usbserial -s "Mio A701 usb gadget"
> +led keyboard 0
> +
> +sdcard_override
> +
> +fb0.enable=1
> +bmp /dev/mtd0.barebox-logo
> +
> +mtd_env_override
> +if [ $? = 0 ]; then
> +    echo "Switching to custom environment"
> +    /env/init
> +    exit
> +fi
> +
> +echo "No custom environment found"
> +echo -n "Hit any key to stop autoboot: "
> +timeout -a $autoboot_timeout
> +if [ $? != 0 ]; then
> +	echo
> +	echo "Welcome to barebox console"
> +	exit
> +fi
> +
> +echo "Booting linux kernel on docg3 chip ..."
> +bootargs="$bootargs mtdparts=mtd0:$mtdparts root=/dev/mtd4"
> +bootm /dev/mtd0.kernel
> diff --git a/arch/arm/boards/mioa701/env/bin/mtd_env_override b/arch/arm/boards/mioa701/env/bin/mtd_env_override
> new file mode 100644
> index 0000000..faeb4d0
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/bin/mtd_env_override
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +
> +loadenv /dev/mtd0.barebox-env
> +exit $?
> diff --git a/arch/arm/boards/mioa701/env/bin/sdcard_override b/arch/arm/boards/mioa701/env/bin/sdcard_override
> new file mode 100644
> index 0000000..4b2ad51
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/bin/sdcard_override
> @@ -0,0 +1,16 @@
> +#!/bin/sh
> +# Script to switch to execute sdcard environment scripts if available
> +#
> +# This enables an override of the default environment if an SD Card
> +# is inserted, has a FAT filesystem,  and has a barebox.env file in
> +# the root directory.
> +
> +mci0.probe=1
> +if [ $mci0.probe = 1 ]; then
> +	mkdir /sdcard
> +	mount /dev/disk0.0 fat /sdcard
> +	if [ -f /sdcard/barebox.env ]; then
> +		loadenv /sdcard/barebox.env /env.sd
> +		/env.sd/bin/init
> +	fi
> +fi
> diff --git a/arch/arm/boards/mioa701/env/config b/arch/arm/boards/mioa701/env/config
> new file mode 100644
> index 0000000..2cc44fd
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/env/config
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +
> +autoboot_timeout=3
> +
> +mtdparts="256k@3456k(barebox)ro,256k(barebox-logo),128k(barebox-env),4M(kernel),-(root)"
> diff --git a/arch/arm/boards/mioa701/mioa701.h b/arch/arm/boards/mioa701/mioa701.h
> new file mode 100644
> index 0000000..20b9b51
> --- /dev/null
> +++ b/arch/arm/boards/mioa701/mioa701.h
> @@ -0,0 +1,81 @@
> +/*
> + * (C) 2011 Robert Jarzmik <robert.jarzmik@free.fr>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +#ifndef _MIOA701_H_
> +#define _MIOA701_H_
> +
> +#define MIO_CFG_IN(pin, af)		\
> +	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
> +	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
> +
> +#define MIO_CFG_OUT(pin, af, state)	\
> +	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
> +	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
> +
> +/* Global GPIOs */
> +#define GPIO9_CHARGE_EN				9
> +#define GPIO18_POWEROFF				18
> +#define GPIO87_LCD_POWER			87
> +#define GPIO96_AC_DETECT			96
> +#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
> +
> +/* USB */
> +#define GPIO13_nUSB_DETECT			13
> +#define GPIO22_USB_ENABLE			22
> +
> +/* SDIO bits */
> +#define GPIO78_SDIO_RO				78
> +#define GPIO15_SDIO_INSERT			15
> +#define GPIO91_SDIO_EN				91
> +
> +/* Bluetooth */
> +#define GPIO14_BT_nACTIVITY			14
> +#define GPIO83_BT_ON				83
> +#define GPIO77_BT_UNKNOWN1			77
> +#define GPIO86_BT_MAYBE_nRESET			86
> +
> +/* GPS */
> +#define GPIO23_GPS_UNKNOWN1			23
> +#define GPIO26_GPS_ON				26
> +#define GPIO27_GPS_RESET			27
> +#define GPIO106_GPS_UNKNOWN2			106
> +#define GPIO107_GPS_UNKNOWN3			107
> +
> +/* GSM */
> +#define GPIO24_GSM_MOD_RESET_CMD		24
> +#define GPIO88_GSM_nMOD_ON_CMD			88
> +#define GPIO90_GSM_nMOD_OFF_CMD			90
> +#define GPIO114_GSM_nMOD_DTE_UART_STATE		114
> +#define GPIO25_GSM_MOD_ON_STATE			25
> +#define GPIO113_GSM_EVENT			113
> +
> +/* SOUND */
> +#define GPIO12_HPJACK_INSERT			12
> +
> +/* LEDS */
> +#define GPIO10_LED_nCharging			10
> +#define GPIO97_LED_nBlue			97
> +#define GPIO98_LED_nOrange			98
> +#define GPIO82_LED_nVibra			82
> +#define GPIO115_LED_nKeyboard			115
> +
> +/* Keyboard */
> +#define GPIO0_KEY_POWER				0
> +#define GPIO93_KEY_VOLUME_UP			93
> +#define GPIO94_KEY_VOLUME_DOWN			94
> +
> +#endif /* _MIOA701_H */
> diff --git a/arch/arm/configs/mioa701_defconfig b/arch/arm/configs/mioa701_defconfig
> new file mode 100644
> index 0000000..2bb3cec
> --- /dev/null
> +++ b/arch/arm/configs/mioa701_defconfig
> @@ -0,0 +1,62 @@
> +CONFIG_ARCH_PXA=y
> +CONFIG_AEABI=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_ARM_UNWIND=y
> +# CONFIG_BANNER is not set
> +CONFIG_TEXT_BASE=0xa3f00000
> +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x262144
> +CONFIG_MALLOC_SIZE=0x1000000
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_GETOPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/mioa701/env"
> +CONFIG_DEBUG_INFO=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_LOADY=y
> +CONFIG_CMD_LOADS=y
> +CONFIG_CMD_SAVES=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_IOMEM=y
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_CRC_CMP=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_BOOTM_VERBOSE=y
> +CONFIG_CMD_BOOTM_INITRD=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_BMP=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_LED=y
> +CONFIG_DRIVER_SERIAL_PXA=y
> +# CONFIG_SPI is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_DEVICE=y
> +CONFIG_MTD_DOCG3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_SERIAL=y
> +CONFIG_VIDEO=y
> +CONFIG_DRIVER_VIDEO_PXA=y
> +CONFIG_MCI=y
> +CONFIG_MCI_PXA=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_FS_CRAMFS=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_WRITE=y
> +CONFIG_FS_FAT_LFN=y
> +CONFIG_BZLIB=y
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 9ef11bb..750f466 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -2,9 +2,11 @@ if ARCH_PXA
>  
>  config ARCH_TEXT_BASE
>  	hex
> +	default 0xa0000000 if MACH_MIOA701
>  
>  config BOARDINFO
>  	string
> +	default "Scoter Mitac Mio A701" if MACH_MIOA701
>  
>  # ----------------------------------------------------------
>  
> @@ -29,8 +31,24 @@ choice
>  	prompt "PXA27x Board Type"
>  	bool
>  
> +config MACH_MIOA701
> +	bool "Mitac Mio A701"
> +	select BCH_CONST_PARAMS
> +	select PWM
> +	help
> +	  Say Y here if you are using a Mitac Mio A701 smartphone
> +	  board
>  endchoice
>  
> +if MACH_MIOA701
> +config BCH_CONST_M
> +	int
> +	default 14 if MACH_MIOA701
> +config BCH_CONST_T
> +	int
> +	default 4 if MACH_MIOA701
> +endif
> +
>  endif
>  
>  # ----------------------------------------------------------
> -- 
> 1.7.5.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2012-02-29  7:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-28 13:41 Robert Jarzmik
2012-02-29  7:41 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120229074153.GS3852@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox