mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Patrick <kpa_info@yahoo.fr>
Cc: barebox@lists.infradead.org
Subject: Re: GPIO commands on OMAP4
Date: Thu, 5 Apr 2012 18:19:28 +0200	[thread overview]
Message-ID: <20120405161928.GG3852@pengutronix.de> (raw)
In-Reply-To: <4F7DB31D.6030800@yahoo.fr>

On Thu, Apr 05, 2012 at 04:58:37PM +0200, Patrick wrote:
> On 04/05/2012 04:38 PM, Patrick wrote:
> >On 04/05/2012 03:49 PM, Sascha Hauer wrote:
> >>On Thu, Apr 05, 2012 at 11:40:49AM +0200, Patrick wrote:
> >>>Dear mailing-list,
> >>>
> >>>I am using a pcm049 phyCORE omap4430 module from Phytec with BareBox
> >>>2011.09.0 patched with BSP from Phytec.
> >>>
> >>>I would like to use the GPIO command to read a switch at startup.
> >>>This chip is connected on ABE_MCBSP1_DX (gpio_116). I have edited
> >>>the boards/pcm049/mux.c files to change the configuration of this
> >>>GPIO as follow: {ABE_MCBSP1_DX, (DIS | IEN | M3)} instead of
> >>>{ABE_MCBSP1_DX, (SAFE_MODE)}.
> >>>
> >>>I then use the "gpio_get_value 116" command followed by "echo $?" to
> >>>read the value. I always read a 0. On Linux I could read the right
> >>>value depending of the position of the switch, so it's not an
> >>>hardware problems.
> >>>
> >>>I have tried with one of the two LEDs on the module (gpio_152) and I
> >>>could change the LED state and read it back with gpio_get_value.
> >>>
> >>>I do not understand what I am doing wrong. Any help will be appreciated.
> >>
> >>What you tried should work. The only thing I can imagine is that you
> >>need a gpio_direction_input before reading the value.
> >>
> >>Sascha
> >>
> >I have found the the problem come from the mux configuration.
> >
> >I have added a call to set_muxconf_regs() from the gpio_get_value()
> >(this is only to try) and then it works. I have checked my configuration
> >and the lowlevel init is enabled:
> >
> >CONFIG_MACH_HAS_LOWLEVEL_INIT=y
> >CONFIG_MACH_DO_LOWLEVEL_INIT=y
> >
> >I am runnig my development version of barebox from the stable barebox
> >flashed on NAND. I do the following:
> >
> >tftp barebox.bin /dev/ram0
> >go /dev/ram0
> >
> >Could this be a problem ?

The mux config is executed from lowlevel_init which returns immediately
when it detects that barebox runs from SDRAM. So yes, that's your
problem.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2012-04-05 16:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-05  9:40 Patrick
2012-04-05 12:45 ` Patrick
2012-04-05 13:49 ` Sascha Hauer
2012-04-05 14:38   ` Patrick
2012-04-05 14:58     ` Patrick
2012-04-05 16:19       ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120405161928.GG3852@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=kpa_info@yahoo.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox