From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2012.05.0
Date: Thu, 3 May 2012 10:00:45 +0200 [thread overview]
Message-ID: <20120503080045.GI4141@pengutronix.de> (raw)
Hi All,
We have a may release \o/. 145 non merge patches made it into this release,
here is what happened:
----------------------------------------------------------------
Alexander Shiyan (28):
i.MX51: add support for UART3
i.MX51: Remove GPIO2.6 setup from lowlevel_init
i.MX27: Use resigter name in imx27_add_fb
Use register names for MC13892
Use mx53-related functions for i.MX53 boards
Remove duplicate voltage setup for imx-esdhc
i.MX27: Define base address for SDHC1,2,3
i.MX27: Add support for SDHC1,3
i.MX51: Fix name definition for SSI3
ARM i.MX51 babbage: Remove clock raise from power_init.
ARM i.MX51 eukrea_cpuimx51: Remove unused include
Rename definitions for ULPI registers
Add ULPI detection function.
Move set_vbus_power code to ULPI driver
Rename function ulpi_init to ulpi_detect
Completely migrate option ISP1504 to ULPI
Cosmetic change name ISP1504 -> ISP150x
i.MX27: Added helper for setup chipselect control register
i.MX51: Added definition for 600 mHz PLL setup.
Select POLLER option for fsl_udc
i.MX27: Export boot source to magic variables
Add barebox.map and compressed default_env to distclean
i.MX51: Fix NANDF_RDY_INT pin definition
i.MX51: Use register names for imx_gpio_base
i.MX51: Removed 1000 MHz pll definition
i.MX5x: Unused pll definitions removed
PCM-038: fix SRAM device name
Define barebox_loc magic variable only once
Allan Heldgaard (1):
mx28-evk: Add LCD support
Asen Chavdarov Dimov (4):
pm9g45: boot from NAND
pm9g45: fix Ethernet
pm9g45: enable MCI0
pm9g45: enable USB OHCI host and USB mass storage
Enrico Scholz (1):
net: dhcp: allow to set transmitted vendor id
Eric Bénard (3):
imx27-regs: fix .h usage in assembly file
fix mxs iomux error in mx23 case
at91sam9g45_devices: fix warning
Esben Haabendal (5):
mxs: Fix support for BITKEEPER() macro
mxs: Fix i.MX28 PWM3 iomux configuration
mxs: Cleanup use of blank lines in i.MX28 iomux configurations
mxs: Add remaining i.MX28 iomux configurations
mx28-evk: Enable LCD support and bmp command
Jan Weitzel (5):
omap: move scale_vcores to omap4_generic
omap: move do_set_mux to omap4_generic
omap: add support for phycard-a-xl2
NET: Add support for ks8851_mll
ENV: remove kernelimage_type from env/config
Jean-Christophe PLAGNIOL-VILLARD (48):
macb: fix mmu support
at91sam9263ek: add runtime nor detection
at91sam9263ek: add leds support
at91sam9263ek: add dfu and usb serial support
at91sam9263ek: update defconfig
at91sam9261ek/9g10ek: update partition layout
at91sam9261ek/9g10ek: add leds support
at91sam9261ek/9g10ek: add dfu and usb serial support
at91sam9261ek/9g10ek: add gpio Keyboard support
at91sam9261ek/9g10ek: update board supprt
at91sam9m10g45ek: update partition layout
at91sam9m10g45ek: add leds support
at91sam9m10g45ek: update defconfig
at91sam9260ek/9g20ek: update defconfig
at91: set dhcp vendor id on Atmel Reference board
defaultenv: add bootp support
defaultenv: add dhcp-barebox option
net: at91_ether re-implement against new at91rm9200 api
at91rm9200ek: enable at91_ether and net support
at91: set ip mode to dhcp-barebox
at91rm9200ek: update config for network
at91rm9200ek: adjust kernel partition to be able to flash mainline kernel
at91rm9200ek: add ohci support
at91rm9200ek: add leds support
at91rm9200ek: add usb serial support
at91rm9200ek: update defconfig
atmel_nand: add on_flash_btt option to enable bbt option
ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro
ARM: at91: allow to pass the interface id to at91_add_device_eth
ARM: at91/pio: add new PIO3 features
AT91: at91sam9x5: add chip and board file
net: dhcp: factorise option recption handling
net: dhcp: reset env variable before do a dhcp request
net: dhcp: add support of tftp name server
net: dhcp: factorise setting option code
net: dhcp: allow to set transmitted client id
net: dhcp: allow to set transmitted client uuid
net: dhcp: allow to set transmitted user class
net: env: getenv_ip use resolv
at91rm9200ek: set maximum nor flash size
defaultenv/update: fix dhcp-barebox support
at91: at91_register_uart use number instead of IDs
tny-a926x: fix MOB-TNY-MD2 Motherboard support
usb: fix driver name
menu: fix double action when "\n\r" or "\r\n" is received
menu: fix non command management support
menu: fix support for "\n", "\n\r" and "\r"
menu: fix menu alloc init
Marc Kleine-Budde (1):
common: memory: fix off-by-one in tlsf_create
Michael Grzeschik (1):
imx_nand_load_image: change all users to use barebox_image_size
Robert Jarzmik (8):
drivers/mtd: improve docg3 write speed
mci: pxamci define timeouts
mci: pxamci change clocks handling
mci: pxamci fix response type
mci: pxamci fix CMD12 handling
mci: pxamci fix R1b responses
mci: pxamci poweron ramp delay
mtd: docg3 fixes backport from Linux kernel
Sascha Hauer (30):
Merge remote-tracking branch 'jean/at91-update' into next
fs: change get_fs_device_by_path prototype
fs: drop struct mtab_entry
Add automount support
fs open: pass error from stat
hush source: expand $PATH
FAT: Fix error path
usb command: by default scan only once for USB devices
partition command: optionally do not automatically prepend the device name
Merge branch 'work/automount' into next
defenv: remove bogus defaultenv from defconfigs
Revert "ARM i.MX53:: Add i2cclk"
ARM linker script: Fix barebox_image_size
ARM i.MX flash header: Fix barebox image sizes
ARM i.MX51 clk: select uart clk parent based on hardware setting
ARM i.MX51 babbage: move lowlevel setup after power init
ARM i.MX51 lowlevel: setup full cpu speed unconditionally
Merge branch 'work/imx-dcd-size' into next
Merge branch 'work/imx51-babbage-clk' into next
cfi flash: Fix loop count calculation
cfi flash: Fix alignment problem
Merge branch 'next'
Merge branch 'work/cfi-fixes'
addpart: remove duplicate line in help text
filetype: Make it work on files < 512 bytes
Merge tag 'j-master-fixes' of git://git.jcrosoft.org/barebox
bootm: fix initrd handling
hush: bail out of scripts on syntax error
uimage/file_to_sdram: fix resource allocation
Release v2012.05.0
Teresa Gámez (5):
pcm049: Update RAM timings
pcm049: Update muxing
pcm049: Update GPMC net conf
devices-gpmc-nand: Add OMAP4 gpmc nand timings
pcm049_xload_defconfig: activate Thumb-2 support
Uwe Hermann (2):
Fixup DRIVER_VIDEO_S3C24XX usage.
menuconfig: Show "Barebox", not "Linux" at the top.
Wolfram Sang (9):
net: miidev: check for errors when accessing bus in restart_aneg
net: miidev: Refactor timeout for aneg
net: miidev: properly check for MII reset
net: ping: send PING packets with 1-second interval
net: ping: remove unneeded initialization
net: tftp: check for error when retrying
net: arp_request: do not retry endlessly
net: tftp: do not retry endlessly
net: ping: do not retry endlessly
guenter.gebhardt@rafi.de (1):
ARM i.MX53:: Add i2cclk
Kconfig | 2 +-
Makefile | 6 +-
arch/arm/Makefile | 2 +
arch/arm/boards/at91rm9200ek/env/bin/init_board | 11 +
arch/arm/boards/at91rm9200ek/env/config | 7 +-
arch/arm/boards/at91rm9200ek/init.c | 68 +-
arch/arm/boards/at91sam9260ek/env/config | 14 +-
arch/arm/boards/at91sam9260ek/init.c | 2 +-
arch/arm/boards/at91sam9261ek/env/bin/init_board | 51 ++
arch/arm/boards/at91sam9261ek/env/config | 16 +-
arch/arm/boards/at91sam9261ek/init.c | 111 ++-
arch/arm/boards/at91sam9263ek/env/bin/init_board | 51 ++
arch/arm/boards/at91sam9263ek/env/config | 9 +-
arch/arm/boards/at91sam9263ek/init.c | 87 +-
arch/arm/boards/at91sam9m10g45ek/env/config | 7 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 48 +-
arch/arm/boards/at91sam9x5ek/Makefile | 1 +
arch/arm/boards/at91sam9x5ek/config.h | 6 +
arch/arm/boards/at91sam9x5ek/env/config | 38 +
arch/arm/boards/at91sam9x5ek/init.c | 167 ++++
arch/arm/boards/beagle/board.c | 3 +-
arch/arm/boards/dss11/init.c | 2 +-
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 8 +-
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 3 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 11 +-
arch/arm/boards/eukrea_cpuimx35/flash_header.c | 2 +-
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 3 +-
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 1 -
arch/arm/boards/eukrea_cpuimx51/flash_header.c | 4 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 8 +-
arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 86 ++
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 3 +-
.../boards/freescale-mx35-3-stack/flash_header.c | 2 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 66 +-
arch/arm/boards/freescale-mx51-pdk/flash_header.c | 4 +-
arch/arm/boards/freescale-mx53-loco/board.c | 2 +-
arch/arm/boards/freescale-mx53-loco/flash_header.c | 2 +-
arch/arm/boards/freescale-mx53-smd/board.c | 2 +-
arch/arm/boards/freescale-mx53-smd/flash_header.c | 2 +-
arch/arm/boards/guf-cupid/lowlevel.c | 3 +-
arch/arm/boards/guf-neso/board.c | 4 +-
arch/arm/boards/guf-neso/lowlevel.c | 3 +-
arch/arm/boards/imx21ads/imx21ads.c | 3 +-
arch/arm/boards/imx27ads/imx27ads.c | 12 +-
arch/arm/boards/karo-tx25/board.c | 3 +-
arch/arm/boards/karo-tx25/lowlevel.c | 3 +-
arch/arm/boards/mini2440/Kconfig | 2 +-
arch/arm/boards/mmccpu/init.c | 2 +-
arch/arm/boards/panda/lowlevel.c | 33 +-
arch/arm/boards/panda/mux.c | 13 +-
arch/arm/boards/pcm037/pcm037.c | 9 +-
arch/arm/boards/pcm038/lowlevel.c | 3 +-
arch/arm/boards/pcm038/pcm038.c | 18 +-
arch/arm/boards/pcm043/lowlevel.c | 3 +-
arch/arm/boards/pcm049/board.c | 15 +-
arch/arm/boards/pcm049/lowlevel.c | 60 +-
arch/arm/boards/pcm049/mux.c | 251 +++---
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 2 +-
arch/arm/boards/phycard-a-xl2/Makefile | 20 +
arch/arm/boards/phycard-a-xl2/config.h | 1 +
.../boards/phycard-a-xl2/env/bin/nand_bootstrap | 31 +
arch/arm/boards/phycard-a-xl2/env/config | 47 ++
arch/arm/boards/phycard-a-xl2/lowlevel.c | 94 +++
arch/arm/boards/phycard-a-xl2/mux.c | 245 ++++++
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 147 ++++
arch/arm/boards/phycard-i.MX27/pca100.c | 11 +-
arch/arm/boards/pm9263/init.c | 2 +-
arch/arm/boards/pm9g45/env/config | 8 +-
arch/arm/boards/pm9g45/init.c | 48 +-
arch/arm/boards/tny-a926x/env/config | 2 +-
arch/arm/boards/tny-a926x/init.c | 38 +-
arch/arm/boards/tqma53/board.c | 2 +-
arch/arm/boards/tqma53/flash_header.c | 2 +-
arch/arm/boards/usb-a926x/env/config | 3 +-
arch/arm/boards/usb-a926x/init.c | 2 +-
arch/arm/configs/at91rm9200ek_defconfig | 27 +-
arch/arm/configs/at91sam9260ek_defconfig | 3 +-
arch/arm/configs/at91sam9261ek_defconfig | 29 +-
arch/arm/configs/at91sam9263ek_defconfig | 31 +-
arch/arm/configs/at91sam9g10ek_defconfig | 39 +-
arch/arm/configs/at91sam9g20ek_defconfig | 3 +-
arch/arm/configs/at91sam9m10g45ek_defconfig | 32 +-
arch/arm/configs/at91sam9x5ek_defconfig | 69 ++
arch/arm/configs/cupid_defconfig | 2 +-
arch/arm/configs/eukrea_cpuimx51_defconfig | 2 +-
arch/arm/configs/freescale_mx51_babbage_defconfig | 2 +-
arch/arm/configs/freescale_mx53_loco_defconfig | 2 +-
arch/arm/configs/freescale_mx53_smd_defconfig | 2 +-
arch/arm/configs/imx28evk_defconfig | 3 +
arch/arm/configs/neso_defconfig | 2 +-
arch/arm/configs/nhk8815_defconfig | 2 +-
arch/arm/configs/pca100_defconfig | 2 +-
arch/arm/configs/pcm038_defconfig | 2 +-
arch/arm/configs/pcm049_xload_defconfig | 1 +
arch/arm/configs/phycard_a_l1_defconfig | 2 +-
arch/arm/configs/phycard_a_xl2_defconfig | 56 ++
arch/arm/configs/phycard_a_xl2_xload_defconfig | 41 +
arch/arm/configs/pm9g45_defconfig | 49 +-
arch/arm/configs/tny_a9260_defconfig | 2 +-
arch/arm/configs/tny_a9263_defconfig | 2 +-
arch/arm/configs/tny_a9g20_defconfig | 2 +-
arch/arm/configs/tqma53_defconfig | 2 +-
arch/arm/lib/barebox.lds.S | 2 +-
arch/arm/mach-at91/Kconfig | 35 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91rm9200_devices.c | 17 +-
arch/arm/mach-at91/at91sam9260_devices.c | 23 +-
arch/arm/mach-at91/at91sam9261_devices.c | 10 +-
arch/arm/mach-at91/at91sam9263_devices.c | 14 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 21 +-
arch/arm/mach-at91/at91sam9x5.c | 314 +++++++
arch/arm/mach-at91/at91sam9x5_devices.c | 270 ++++++
arch/arm/mach-at91/clock.c | 82 +-
arch/arm/mach-at91/gpio.c | 129 ++-
arch/arm/mach-at91/include/mach/at91_pio.h | 25 +
arch/arm/mach-at91/include/mach/at91_pmc.h | 68 +-
arch/arm/mach-at91/include/mach/at91sam9x5.h | 179 ++++
.../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 139 +++
arch/arm/mach-at91/include/mach/board.h | 2 +-
arch/arm/mach-at91/include/mach/cpu.h | 28 +
arch/arm/mach-at91/include/mach/gpio.h | 6 +
arch/arm/mach-at91/include/mach/hardware.h | 2 +
arch/arm/mach-imx/Kconfig | 2 +-
arch/arm/mach-imx/boot.c | 27 +-
arch/arm/mach-imx/imx51.c | 37 +-
arch/arm/mach-imx/include/mach/clock-imx51_53.h | 39 -
arch/arm/mach-imx/include/mach/devices-imx27.h | 12 +-
arch/arm/mach-imx/include/mach/devices-imx51.h | 5 +
arch/arm/mach-imx/include/mach/imx-flash-header.h | 10 +
arch/arm/mach-imx/include/mach/imx27-regs.h | 33 +-
arch/arm/mach-imx/include/mach/imx51-regs.h | 2 +-
arch/arm/mach-imx/include/mach/iomux-mx51.h | 2 +-
arch/arm/mach-imx/speed-imx51.c | 10 +-
arch/arm/mach-mxs/include/mach/iomux-imx23.h | 4 +
arch/arm/mach-mxs/include/mach/iomux-imx28.h | 163 +++-
arch/arm/mach-mxs/iomux-imx.c | 6 +
arch/arm/mach-omap/Kconfig | 10 +
arch/arm/mach-omap/devices-gpmc-nand.c | 33 +-
arch/arm/mach-omap/include/mach/gpmc_nand.h | 6 +-
arch/arm/mach-omap/include/mach/omap4-mux.h | 2 +
arch/arm/mach-omap/include/mach/omap4-silicon.h | 1 +
arch/arm/mach-omap/omap3_generic.c | 16 +
arch/arm/mach-omap/omap4_generic.c | 57 ++
arch/openrisc/boards/generic/env/config | 1 -
commands/Kconfig | 10 +
commands/Makefile | 1 +
commands/automount.c | 66 ++
commands/bootm.c | 24 +-
commands/menu.c | 17 +-
commands/mount.c | 10 +-
commands/partition.c | 32 +-
commands/usb.c | 26 +-
common/filetype.c | 4 +-
common/hush.c | 21 +-
common/memory.c | 2 +-
common/menu.c | 9 +-
common/uimage.c | 6 +-
defaultenv/bin/_boot_help | 8 +-
defaultenv/bin/_update | 2 +-
defaultenv/bin/boot | 17 +-
defaultenv/config | 1 +
drivers/base/resource.c | 33 +
drivers/mci/imx-esdhc.c | 2 -
drivers/mci/pxamci.c | 49 +-
drivers/mci/pxamci.h | 1 +
drivers/mfd/mc13892.c | 2 +-
drivers/mtd/devices/docg3.c | 41 +-
drivers/mtd/nand/atmel_nand.c | 6 +
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1 +
drivers/net/at91_ether.c | 495 ++++++-----
drivers/net/at91_ether.h | 50 ++
drivers/net/ks8851_mll.c | 891 ++++++++++++++++++++
drivers/net/miidev.c | 63 +-
drivers/nor/cfi_flash_intel.c | 20 +-
drivers/usb/core/usb.c | 1 +
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/otg/Kconfig | 8 +-
drivers/usb/otg/Makefile | 1 -
drivers/usb/otg/isp1504.c | 37 -
drivers/usb/otg/ulpi.c | 80 +-
drivers/usb/storage/usb.c | 1 -
drivers/video/Kconfig | 2 +-
fs/Kconfig | 3 +
fs/fat/fat.c | 18 +-
fs/fat/ff.c | 4 +-
fs/fs.c | 282 +++++--
include/driver.h | 11 +
include/fs.h | 19 +-
include/menu.h | 1 +
include/net.h | 8 +-
include/usb/isp1504.h | 6 -
include/usb/ulpi.h | 21 +-
net/dhcp.c | 434 +++++++---
net/dns.c | 2 +-
net/net.c | 14 +-
net/ping.c | 12 +-
net/tftp.c | 14 +-
198 files changed, 5834 insertions(+), 1383 deletions(-)
create mode 100644 arch/arm/boards/at91rm9200ek/env/bin/init_board
create mode 100644 arch/arm/boards/at91sam9261ek/env/bin/init_board
create mode 100644 arch/arm/boards/at91sam9263ek/env/bin/init_board
create mode 100644 arch/arm/boards/at91sam9x5ek/Makefile
create mode 100644 arch/arm/boards/at91sam9x5ek/config.h
create mode 100644 arch/arm/boards/at91sam9x5ek/env/config
create mode 100644 arch/arm/boards/at91sam9x5ek/init.c
create mode 100644 arch/arm/boards/phycard-a-xl2/Makefile
create mode 100644 arch/arm/boards/phycard-a-xl2/config.h
create mode 100644 arch/arm/boards/phycard-a-xl2/env/bin/nand_bootstrap
create mode 100644 arch/arm/boards/phycard-a-xl2/env/config
create mode 100644 arch/arm/boards/phycard-a-xl2/lowlevel.c
create mode 100644 arch/arm/boards/phycard-a-xl2/mux.c
create mode 100644 arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
create mode 100644 arch/arm/configs/at91sam9x5ek_defconfig
create mode 100644 arch/arm/configs/phycard_a_xl2_defconfig
create mode 100644 arch/arm/configs/phycard_a_xl2_xload_defconfig
create mode 100644 arch/arm/mach-at91/at91sam9x5.c
create mode 100644 arch/arm/mach-at91/at91sam9x5_devices.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
create mode 100644 commands/automount.c
create mode 100644 drivers/net/at91_ether.h
create mode 100644 drivers/net/ks8851_mll.c
delete mode 100644 drivers/usb/otg/isp1504.c
delete mode 100644 include/usb/isp1504.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-05-03 8:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120503080045.GI4141@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox