mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <shc_work@mail.ru>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses
Date: Fri, 11 May 2012 22:02:05 +0200	[thread overview]
Message-ID: <20120511200205.GT27341@pengutronix.de> (raw)
In-Reply-To: <1336762729-20308-1-git-send-email-shc_work@mail.ru>

On Fri, May 11, 2012 at 10:58:49PM +0400, Alexander Shiyan wrote:
> ---
>  commands/i2c.c |   26 +++++++++++++++++---------
>  1 files changed, 17 insertions(+), 9 deletions(-)
> 

Applied and realized afterwards that you forgot to sign off your
patches. Please resend this one, I'll replace it.

Sascha

> diff --git a/commands/i2c.c b/commands/i2c.c
> index 39bae35..1eaa968 100644
> --- a/commands/i2c.c
> +++ b/commands/i2c.c
> @@ -74,10 +74,10 @@ static int do_i2c_write(int argc, char *argv[])
>  {
>  	struct i2c_adapter *adapter = NULL;
>  	struct i2c_client client;
> -	int addr = -1, reg = -1, count = -1, verbose = 0, ret, opt, i, bus = 0;
> +	int addr = -1, reg = -1, count = -1, verbose = 0, ret, opt, i, bus = 0, wide = 0;
>  	u8 *buf;
>  
> -	while ((opt = getopt(argc, argv, "a:b:r:v")) > 0) {
> +	while ((opt = getopt(argc, argv, "a:b:r:v:w")) > 0) {
>  		switch (opt) {
>  		case 'a':
>  			addr = simple_strtol(optarg, NULL, 0);
> @@ -91,6 +91,9 @@ static int do_i2c_write(int argc, char *argv[])
>  		case 'v':
>  			verbose = 1;
>  			break;
> +		case 'w':
> +			wide = 1;
> +			break;
>  		}
>  	}
>  
> @@ -112,13 +115,13 @@ static int do_i2c_write(int argc, char *argv[])
>  	for (i = 0; i < count; i++)
>  		*(buf + i) = (char) simple_strtol(argv[optind+i], NULL, 16);
>  
> -	ret = i2c_write_reg(&client, reg, buf, count);
> +	ret = i2c_write_reg(&client, reg | (wide ? I2C_ADDR_16_BIT : 0), buf, count);
>  	if (ret != count)
>  		goto out;
>  	ret = 0;
>  
>  	if (verbose) {
> -		printf("wrote %i bytes starting at reg 0x%02x to i2cdev 0x%02x on bus %i\n",
> +		printf("wrote %i bytes starting at reg 0x%04x to i2cdev 0x%02x on bus %i\n",
>  			count, reg, addr, adapter->nr);
>  		for (i = 0; i < count; i++)
>  			printf("0x%02x ", *(buf + i));
> @@ -135,7 +138,8 @@ static const __maybe_unused char cmd_i2c_write_help[] =
>  "write to i2c device.\n"
>  "  -a 0x<addr>   i2c device address\n"
>  "  -b <bus_num>  i2c bus number (default = 0)\n"
> -"  -r 0x<reg>    start register\n";
> +"  -r 0x<reg>    start register\n"
> +"  -w            use 16bit-wide address access\n";
>  
>  BAREBOX_CMD_START(i2c_write)
>  	.cmd		= do_i2c_write,
> @@ -148,9 +152,9 @@ static int do_i2c_read(int argc, char *argv[])
>  	struct i2c_adapter *adapter = NULL;
>  	struct i2c_client client;
>  	u8 *buf;
> -	int count = -1, addr = -1, reg = -1, verbose = 0, ret, opt, bus = 0;
> +	int count = -1, addr = -1, reg = -1, verbose = 0, ret, opt, bus = 0, wide = 0;
>  
> -	while ((opt = getopt(argc, argv, "a:b:c:r:v")) > 0) {
> +	while ((opt = getopt(argc, argv, "a:b:c:r:v:w")) > 0) {
>  		switch (opt) {
>  		case 'a':
>  			addr = simple_strtol(optarg, NULL, 0);
> @@ -167,6 +171,9 @@ static int do_i2c_read(int argc, char *argv[])
>  		case 'v':
>  			verbose = 1;
>  			break;
> +		case 'w':
> +			wide = 1;
> +			break;
>  		}
>  	}
>  
> @@ -183,11 +190,11 @@ static int do_i2c_read(int argc, char *argv[])
>  	client.addr = addr;
>  
>  	buf = xmalloc(count);
> -	ret = i2c_read_reg(&client, reg, buf, count);
> +	ret = i2c_read_reg(&client, reg | (wide ? I2C_ADDR_16_BIT : 0), buf, count);
>  	if (ret == count) {
>  		int i;
>  		if (verbose)
> -			printf("read %i bytes starting at reg 0x%02x from i2cdev 0x%02x on bus %i\n",
> +			printf("read %i bytes starting at reg 0x%04x from i2cdev 0x%02x on bus %i\n",
>  				count, reg, addr, adapter->nr);
>  		for (i = 0; i < count; i++)
>  			printf("0x%02x ", *(buf + i));
> @@ -205,6 +212,7 @@ static const __maybe_unused char cmd_i2c_read_help[] =
>  "  -a 0x<addr>   i2c device address\n"
>  "  -b <bus_num>  i2c bus number (default = 0)\n"
>  "  -r 0x<reg>    start register\n"
> +"  -w            use 16bit-wide address access\n"
>  "  -c <count>    byte count\n";
>  
>  BAREBOX_CMD_START(i2c_read)
> -- 
> 1.7.3.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-05-11 20:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-11 15:42 [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command Alexander Shiyan
2012-05-11 15:42 ` [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses Alexander Shiyan
2012-05-11 18:15   ` Sascha Hauer
2012-05-11 18:17     ` Re[2]: " Alexander Shiyan
2012-05-11 18:35       ` Sascha Hauer
2012-05-11 18:58         ` Alexander Shiyan
2012-05-11 20:02           ` Sascha Hauer [this message]
2012-05-11 20:17             ` [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command Alexander Shiyan
2012-05-11 20:17             ` [PATCH 2/2] i2c: Added switch for allowing usage 16bit register addresses Alexander Shiyan
2012-05-11 18:12 ` [PATCH 1/2] i2c: Fix barebox crash when 'count' is not set for i2c_read command Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120511200205.GT27341@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=shc_work@mail.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox