From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from canuck.infradead.org ([2001:4978:20e::1]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Shm6r-0006Uy-Iw for barebox@lists.infradead.org; Thu, 21 Jun 2012 18:28:01 +0000 Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Shm6p-0000a3-Li for barebox@lists.infradead.org; Thu, 21 Jun 2012 18:28:01 +0000 Date: Thu, 21 Jun 2012 20:27:57 +0200 From: Sascha Hauer Message-ID: <20120621182757.GF28394@pengutronix.de> References: <1340270178-2615-1-git-send-email-jbe@pengutronix.de> <1340270178-2615-3-git-send-email-jbe@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1340270178-2615-3-git-send-email-jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 2/2] Add two architectures which can detect the reset source To: Juergen Beisert Cc: barebox@lists.infradead.org On Thu, Jun 21, 2012 at 11:16:18AM +0200, Juergen Beisert wrote: > These are examples how to provide the reset source. Not really tested on > the corresponding hardware yet. I did. On i.MX1 it does not work. The reset source register is not inside the watchdog module, but at 0x0021b800 (Reset source register, RSR) On i.MX27 it correctly detects a watchdog reset but not a power on reset. On i.MX27 it must be: # define WDOG_WRSR_EXT (1 << 3) # define WDOG_WRSR_PWR (1 << 4) i.MX51 does not seem to have a power-on-reset bit, at least not in the watchdog module. I didn't check the other i.MXs Sascha > > Signed-off-by: Juergen Beisert > --- > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/reset_source.c | 59 ++++++++++++++++++++++++++++++++++ > arch/arm/mach-samsung/Makefile | 1 + > arch/arm/mach-samsung/reset_source.c | 56 ++++++++++++++++++++++++++++++++ > 4 files changed, 117 insertions(+) > create mode 100644 arch/arm/mach-imx/reset_source.c > create mode 100644 arch/arm/mach-samsung/reset_source.c > > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 03e2421..7da8cec 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -1,4 +1,5 @@ > obj-y += clocksource.o gpio.o > +obj-$(CONFIG_GLOBALVAR) += reset_source.o > obj-$(CONFIG_ARCH_IMX1) += speed-imx1.o imx1.o iomux-v1.o > obj-$(CONFIG_ARCH_IMX25) += speed-imx25.o imx25.o iomux-v3.o > obj-$(CONFIG_ARCH_IMX21) += speed-imx21.o imx21.o iomux-v1.o > diff --git a/arch/arm/mach-imx/reset_source.c b/arch/arm/mach-imx/reset_source.c > new file mode 100644 > index 0000000..79e5337 > --- /dev/null > +++ b/arch/arm/mach-imx/reset_source.c > @@ -0,0 +1,59 @@ > +/* > + * (C) Copyright 2012 Juergen Beisert - > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +#ifdef CONFIG_ARCH_IMX1 > +# define WDOG_WRSR 0x08 > +# define WDOG_WRSR_TOUT (1 << 0) > +/* let the compiler sort out useless code on this arch */ > +# define WDOG_WRSR_SFTW 0 > +# define WDOG_WRSR_EXT 0 > +# define WDOG_WRSR_PWR 0 > +#else > +# define WDOG_WRSR 0x04 > +# define WDOG_WRSR_SFTW (1 << 0) > +# define WDOG_WRSR_TOUT (1 << 1) > +# define WDOG_WRSR_EXT (1 << 2) > +# define WDOG_WRSR_PWR (1 << 3) > +#endif > + > +static int imx_detect_reset_source(void) > +{ > + u16 reg = readw(IMX_WDT_BASE + WDOG_WRSR); > + > + if (reg & WDOG_WRSR_PWR) { > + set_reset_source(RESET_POR); > + return 0; > + } > + > + if (reg & (WDOG_WRSR_EXT | WDOG_WRSR_SFTW)) { > + set_reset_source(RESET_RST); > + return 0; > + } > + > + if (reg & WDOG_WRSR_TOUT) { > + set_reset_source(RESET_WDG); > + return 0; > + } > + > + /* else keep the default 'unknown' state */ > + return 0; > +} > + > +device_initcall(imx_detect_reset_source); > diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile > index d7344c8..74799c5 100644 > --- a/arch/arm/mach-samsung/Makefile > +++ b/arch/arm/mach-samsung/Makefile > @@ -1,4 +1,5 @@ > obj-y += s3c-timer.o generic.o > +obj-$(CONFIG_GLOBALVAR) += reset_source.o > obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o > obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o > obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o mem-s3c24x0.o > diff --git a/arch/arm/mach-samsung/reset_source.c b/arch/arm/mach-samsung/reset_source.c > new file mode 100644 > index 0000000..2456e3f > --- /dev/null > +++ b/arch/arm/mach-samsung/reset_source.c > @@ -0,0 +1,56 @@ > +/* > + * (C) Copyright 2012 Juergen Beisert - > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +/* S3C2440 relevant */ > +#define S3C2440_GSTATUS2 0xb4 > +# define S3C2440_GSTATUS2_PWRST (1 << 0) > +# define S3C2440_GSTATUS2_SLEEPRST (1 << 1) > +# define S3C2440_GSTATUS2_WDRST (1 << 2) > + > +static int s3c_detect_reset_source(void) > +{ > + u32 reg = readl(S3C_GPIO_BASE + S3C2440_GSTATUS2); > + > + if (reg & S3C2440_GSTATUS2_PWRST) { > + set_reset_source(RESET_POR); > + writel(S3C2440_GSTATUS2_PWRST, > + S3C_GPIO_BASE + S3C2440_GSTATUS2); > + return 0; > + } > + > + if (reg & S3C2440_GSTATUS2_SLEEPRST) { > + set_reset_source(RESET_WKE); > + writel(S3C2440_GSTATUS2_SLEEPRST, > + S3C_GPIO_BASE + S3C2440_GSTATUS2); > + return 0; > + } > + > + if (reg & S3C2440_GSTATUS2_WDRST) { > + set_reset_source(RESET_WDG); > + writel(S3C2440_GSTATUS2_WDRST, > + S3C_GPIO_BASE + S3C2440_GSTATUS2); > + return 0; > + } > + > + /* else keep the default 'unknown' state */ > + return 0; > +} > + > +device_initcall(s3c_detect_reset_source); > -- > 1.7.10 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox