* Re: [PATCH v2 0/5] rewritten memtest command
[not found] <1339682504-4063-1-git-send-email-a.aring@phytec.de>
@ 2012-06-26 18:44 ` Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2012-06-26 18:44 UTC (permalink / raw)
To: Alexander Aring; +Cc: barebox
Hi Alexander,
On Thu, Jun 14, 2012 at 04:01:39PM +0200, Alexander Aring wrote:
> Rewritten memtest command.
> Added new section data which is between text and bss.
> Only tested on arm architecture.
It took a while until I found some time to have a closer look at this. I
was a bit concerned about the fact that the new memtest command depends
on some very lowlevel internal barebox APIs. Anyway, I gave it a try and
it actually works quite well. Thanks for working on it, the new memtest
seems much more trustworthy than the old test(s).
I found some problems with the calculation of used regions, so I would
like to add the following to your patch, if that's ok with you. It also
adds a progress bar and the possibility to interrupt the test during an
iteration.
Sascha
8<-------------------------------------------------------
memtest updates
- fix calculation of regions to test. When we use PAGE_ALIGN on
size, size can be to high.
- start address has to be aligned up
- end address has to be aligned down
- then size can be calculated as end - start + 1
- Add ctrlc() to the longer loops
- Add a progress bar to give some visual feedback that something is
still going on.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/memtest.c | 128 ++++++++++++++++++++++++++++++----------------------
1 file changed, 74 insertions(+), 54 deletions(-)
diff --git a/commands/memtest.c b/commands/memtest.c
index ff7aac2..683765b 100644
--- a/commands/memtest.c
+++ b/commands/memtest.c
@@ -31,6 +31,8 @@
#include <types.h>
#include <getopt.h>
#include <memory.h>
+#include <errno.h>
+#include <progress.h>
#include <asm/mmu.h>
static const vu_long bitpattern[] = {
@@ -69,12 +71,6 @@ static int mem_test(vu_long _start, vu_long _end,
num_words = (_end - _start)/sizeof(vu_long);
- /* Exit if ctrl-c is pressed */
- if (ctrlc()) {
- printf("Memtest interrupted.\n");
- return -1;
- }
-
printf("Starting data line test.\n");
/*
@@ -311,53 +307,78 @@ static int mem_test(vu_long _start, vu_long _end,
/*
* Fill memory with a known pattern.
*/
- for (offset = 0; offset < (num_words); offset++) {
+ init_progression_bar(num_words);
+ for (offset = 0; offset < num_words; offset++) {
+ if (!(offset & 0xfff)) {
+ if (ctrlc())
+ return -EINTR;
+ show_progress(offset);
+ }
+
ret = address_in_sdram_regions((vu_long)&start[offset]);
if (ret)
continue;
- start[offset] = offset+1;
+ start[offset] = offset + 1;
}
- printf("Compare written patterns...\n");
+ show_progress(offset);
+
+ printf("\nCompare written patterns...\n");
/*
* Check each location and invert it for the second pass.
*/
+ init_progression_bar(num_words - 1);
for (offset = 0; offset < num_words; offset++) {
+ if (!(offset & 0xfff)) {
+ if (ctrlc())
+ return -EINTR;
+ show_progress(offset);
+ }
+
ret = address_in_sdram_regions((vu_long)&start[offset]);
if (ret)
continue;
temp = start[offset];
- if (temp != (offset+1)) {
- printf("FAILURE (read/write) @ 0x%08lx:"
+ if (temp != (offset + 1)) {
+ printf("\nFAILURE (read/write) @ 0x%08lx:"
" expected 0x%08lx, actual 0x%08lx.\n",
(vu_long)&start[offset],
- (offset+1), temp);
+ (offset + 1), temp);
return -1;
}
- anti_pattern = ~(offset+1);
+ anti_pattern = ~(offset + 1);
start[offset] = anti_pattern;
}
- printf("Filling ram with inverted pattern and compare it...\n");
+ show_progress(offset);
+
+ printf("\nFilling ram with inverted pattern and compare it...\n");
/*
* Check each location for the inverted pattern and zero it.
*/
+ init_progression_bar(num_words - 1);
for (offset = 0; offset < num_words; offset++) {
+ if (!(offset & 0xfff)) {
+ if (ctrlc())
+ return -EINTR;
+ show_progress(offset);
+ }
+
ret = address_in_sdram_regions((vu_long)&start[offset]);
/* Step over barebox mem usage */
if (ret)
continue;
- anti_pattern = ~(offset+1);
+ anti_pattern = ~(offset + 1);
temp = start[offset];
if (temp != anti_pattern) {
- printf("FAILURE (read/write): @ 0x%08lx:"
+ printf("\nFAILURE (read/write): @ 0x%08lx:"
" expected 0x%08lx, actual 0x%08lx.\n",
(vu_long)&start[offset],
anti_pattern, temp);
@@ -367,6 +388,8 @@ static int mem_test(vu_long _start, vu_long _end,
start[offset] = 0;
}
+ show_progress(offset);
+
return 0;
}
@@ -378,14 +401,12 @@ static void print_region(vu_long start, vu_long size, uint32_t flags)
switch (flags) {
case PTE_FLAGS_UNCACHED:
- printf("Set non caching region at 0x%08lx until"
- " 0x%08lx size 0x%08lx.\n", start,
- start + size, size);
+ printf("Set non caching region at 0x%08lx - 0x%08lx size 0x%08lx.\n",
+ start, start + size - 1, size);
break;
case PTE_FLAGS_CACHED:
- printf("Set caching region at 0x%08lx until"
- " 0x%08lx size 0x%08lx.\n", start,
- start + size, size);
+ printf("Set caching region at 0x%08lx - 0x%08lx size 0x%08lx.\n",
+ start, start + size - 1, size);
break;
default:
/* This should never happen. */
@@ -394,6 +415,8 @@ static void print_region(vu_long start, vu_long size, uint32_t flags)
}
}
+#define PAGE_ALIGN_DOWN(x) ((x) & ~(PAGE_SIZE - 1))
+
static void do_remap_range(struct memory_bank *bank, uint32_t flags)
{
struct resource *r = NULL;
@@ -407,41 +430,37 @@ static void do_remap_range(struct memory_bank *bank, uint32_t flags)
list_for_each_entry(r, &bank->res->children, sibling) {
/* Do on head element for bank boundary */
if (r->sibling.prev == &bank->res->children) {
- start = bank->start;
- end = r->start;
- size = end - start;
+ /* remember last used element */
+ r_prev = r;
- size = PAGE_ALIGN(size);
- start = PAGE_ALIGN(start);
+ start = PAGE_ALIGN(bank->start);
+ end = PAGE_ALIGN_DOWN(r->start) - 1;
+ if (start >= end)
+ continue;
+ size = end - start + 1;
print_region(start, size, flags);
remap_range((void *)start, size, flags);
- /* remember last used element */
- r_prev = r;
continue;
}
/* Between used regions */
- start = r_prev->start + r_prev->size;
- end = r->start;
- size = end - start;
-
-
- size = PAGE_ALIGN(size);
- start = PAGE_ALIGN(start);
-
- print_region(start, size, flags);
- remap_range((void *)start, size, flags);
+ start = PAGE_ALIGN(r_prev->start + r_prev->size);
+ end = PAGE_ALIGN_DOWN(r->start) - 1;
+ if (start < end) {
+ size = end - start + 1;
+ print_region(start, size, flags);
+ remap_range((void *)start, size, flags);
+ }
r_prev = r;
/* Do on head element for bank boundary */
if (list_is_last(&r->sibling, &bank->res->children)) {
- start = r->start + r->size;
- end = bank->start + bank->size;
- size = end - start;
-
- size = PAGE_ALIGN(size);
- start = PAGE_ALIGN(start);
+ start = PAGE_ALIGN(r->start + r->size);
+ end = PAGE_ALIGN_DOWN(bank->start + bank->size) - 1;
+ if (start >= end)
+ continue;
+ size = end - start + 1;
print_region(start, size, flags);
remap_range((void *)start, size, flags);
@@ -490,7 +509,7 @@ static int do_mem_memtest(int argc, char *argv[])
/* Error if no end address */
if (start && !end) {
- printf("Please add a end address.\n");
+ printf("Please add an end address.\n");
return 1;
}
@@ -532,9 +551,8 @@ static int do_mem_memtest(int argc, char *argv[])
for_each_memory_bank(bank) {
list_for_each_entry(r, &bank->res->children, sibling)
- printf("Will skipping region at 0x%08x"
- " until 0x%08x size 0x%08x name %s.\n",
- r->start, r->size + r->start,
+ printf("Skipping region at 0x%08x - 0x%08x, size 0x%08x (%s)\n",
+ r->start, r->size + r->start - 1,
r->size, r->name);
#ifdef CONFIG_MMU
/* Disable caching */
@@ -544,8 +562,7 @@ static int do_mem_memtest(int argc, char *argv[])
/* Do test if we set a start or end address */
if (start && end) {
- printf("Testing address range: 0x%08lx until "
- "0x%08lx.\n",
+ printf("Testing address range: 0x%08lx - 0x%08lx.\n",
start, end);
for (i = 1; (i <= max_i) || !max_i; i++) {
@@ -553,6 +570,10 @@ static int do_mem_memtest(int argc, char *argv[])
/* Do the memtest */
err = mem_test(start, end, bus_only);
+ if (err == -EINTR) {
+ printf("Test interrupted\n");
+ goto err;
+ }
if (err < 0) {
printf("Test failed.\n");
@@ -577,8 +598,7 @@ static int do_mem_memtest(int argc, char *argv[])
start = bank->start;
end = bank->start + bank->size;
- printf("Testing address range: 0x%08lx until "
- "0x%08lx on bank /dev/%s.\n",
+ printf("Testing address range: 0x%08lx - 0x%08lx on bank /dev/%s.\n",
start, end, bank->res->name);
printf("Iteration: %u\n", i);
@@ -624,4 +644,4 @@ BAREBOX_CMD_START(memtest)
.cmd = do_mem_memtest,
.usage = "Memory Test",
BAREBOX_CMD_HELP(cmd_memtest_help)
- BAREBOX_CMD_END
+BAREBOX_CMD_END
--
1.7.10
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-06-26 18:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1339682504-4063-1-git-send-email-a.aring@phytec.de>
2012-06-26 18:44 ` [PATCH v2 0/5] rewritten memtest command Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox