mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jan Weitzel <j.weitzel@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
Date: Thu, 19 Jul 2012 00:11:27 +0200	[thread overview]
Message-ID: <20120718221127.GS30009@pengutronix.de> (raw)
In-Reply-To: <1342615033-3232-2-git-send-email-j.weitzel@phytec.de>

Hi Jan,

On Wed, Jul 18, 2012 at 02:37:11PM +0200, Jan Weitzel wrote:
> GPMC could be already configured by xloader or rom bootloader
> Use the configured buswidth (width == 0) or set it explicit in the board file.

What happens if it hasn't been configured by the ROM or xloader, for
example when booting from MMC?

Sascha

> 
> Use autodetect on pcm049
> 
> Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> ---
>  arch/arm/boards/pcm049/board.c         |    4 ++--
>  arch/arm/mach-omap/devices-gpmc-nand.c |   23 ++++++++++++++++++-----
>  arch/arm/mach-omap/gpmc.c              |   19 +++++++++++++++++++
>  arch/arm/mach-omap/include/mach/gpmc.h |    8 ++++++++
>  4 files changed, 47 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
> index 3a2b574..4f056e0 100644
> --- a/arch/arm/boards/pcm049/board.c
> +++ b/arch/arm/boards/pcm049/board.c
> @@ -112,9 +112,9 @@ static int pcm049_devices_init(void)
>  
>  	pcm049_network_init();
>  
> -	gpmc_generic_nand_devices_init(0, 8,
> +	/* Autodetect buswidth*/
> +	gpmc_generic_nand_devices_init(0, 0,
>  			OMAP_ECC_BCH8_CODE_HW, &omap4_nand_cfg);
> -
>  #ifdef CONFIG_PARTITION
>  	devfs_add_partition("nand0", 0x00000, SZ_128K,
>  			DEVFS_PARTITION_FIXED, "xload_raw");
> diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
> index cf87b57..06f9576 100644
> --- a/arch/arm/mach-omap/devices-gpmc-nand.c
> +++ b/arch/arm/mach-omap/devices-gpmc-nand.c
> @@ -35,9 +35,7 @@
>  #include <mach/silicon.h>
>  #include <mach/gpmc.h>
>  #include <mach/gpmc_nand.h>
> -
> -#define GPMC_CONF1_VALx8	0x00000800
> -#define GPMC_CONF1_VALx16	0x00001800
> +#include <mach/xload.h>
>  
>  /** NAND platform specific settings settings */
>  static struct gpmc_nand_platform_data nand_plat = {
> @@ -51,15 +49,30 @@ static struct gpmc_nand_platform_data nand_plat = {
>   *
>   * @return success/fail based on device function
>   */
> +
>  int gpmc_generic_nand_devices_init(int cs, int width,
>  		enum gpmc_ecc_mode eccmode, struct gpmc_config *nand_cfg)
>  {
>  	nand_plat.cs = cs;
>  
> +	if (width == 0) {
> +		struct gpmc_config cfg;
> +		/* try to get buswidth from gpmc */
> +		gpmc_get_config(cs, &cfg);
> +		width = (cfg.cfg[0] & GPMC_CONFIG1_DEVICETYPE_NAND) ? 16 : 8;
> +
> +		if (!(cfg.cfg[0] & GPMC_CONFIG1_DEVICETYPE_NAND))
> +			debug("GPMC not configured for NAND, "
> +					"try width %d bit\n", width);
> +
> +		debug("%s cfg0 %x width %d\n", __func__, cfg.cfg[0], width);
> +	}
> +
>  	if (width == 16)
> -		nand_cfg->cfg[0] = GPMC_CONF1_VALx16;
> +		nand_cfg->cfg[0] = GPMC_CONFIG1_DEVICETYPE_NAND |
> +					GPMC_CONFIG1_DEVICESIZE_16;
>  	else
> -		nand_cfg->cfg[0] = GPMC_CONF1_VALx8;
> +		nand_cfg->cfg[0] = GPMC_CONFIG1_DEVICETYPE_NAND;
>  
>  	nand_plat.device_width = width;
>  	nand_plat.ecc_mode = eccmode;
> diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c
> index e8946d7..399f68a 100644
> --- a/arch/arm/mach-omap/gpmc.c
> +++ b/arch/arm/mach-omap/gpmc.c
> @@ -115,3 +115,22 @@ void gpmc_cs_config(char cs, struct gpmc_config *config)
>  	mdelay(1);		/* Settling time */
>  }
>  EXPORT_SYMBOL(gpmc_cs_config);
> +
> +void gpmc_get_config(char cs, struct gpmc_config *config)
> +{
> +	unsigned int reg = GPMC_REG(CONFIG1_0) + (cs * GPMC_CONFIG_CS_SIZE);
> +	unsigned int cfg7;
> +	unsigned char i;
> +
> +	/* Read the CFG1-6 regs */
> +	for (i = 0; i < 6; i++) {
> +		config->cfg[i] = readl(reg);
> +		reg += GPMC_CONFIG_REG_OFF;
> +	}
> +
> +	cfg7 = readl(reg);
> +
> +	config->size = (cfg7 >> 8) & 0xf;
> +	config->base = (cfg7 & 0x3F) << 24;
> +}
> +EXPORT_SYMBOL(gpmc_get_config);
> diff --git a/arch/arm/mach-omap/include/mach/gpmc.h b/arch/arm/mach-omap/include/mach/gpmc.h
> index 3ddc5f5..84260fc 100644
> --- a/arch/arm/mach-omap/include/mach/gpmc.h
> +++ b/arch/arm/mach-omap/include/mach/gpmc.h
> @@ -140,6 +140,11 @@
>  
>  #define NAND_WP_BIT		0x00000010
>  
> +#define GPMC_CONFIG1_DEVICESIZE(val)	((val & 3) << 12)
> +#define GPMC_CONFIG1_DEVICESIZE_16	GPMC_CONFIG1_DEVICESIZE(1)
> +#define GPMC_CONFIG1_DEVICETYPE(val)	((val & 3) << 10)
> +#define GPMC_CONFIG1_DEVICETYPE_NAND	GPMC_CONFIG1_DEVICETYPE(2)
> +
>  #ifndef __ASSEMBLY__
>  
>  /** Generic GPMC configuration structure to be used to configure a
> @@ -157,6 +162,9 @@ void gpmc_generic_init(unsigned int cfg);
>  /** Configuration for a specific chip select */
>  void gpmc_cs_config(char cs, struct gpmc_config *config);
>  
> +/** Get Configuration for a specific chip select */
> +void gpmc_get_config(char cs, struct gpmc_config *config);
> +
>  #endif
>  
>  #endif /* __ASM_ARCH_OMAP_GPMC_H */
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-07-18 22:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-18 12:37 [PATCH 0/3] omap gpmc nand autodetect Jan Weitzel
2012-07-18 12:37 ` [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC Jan Weitzel
2012-07-18 22:11   ` Sascha Hauer [this message]
2012-07-19  7:54     ` [PATCH 1/3 v2] " Jan Weitzel
2012-07-19  8:31     ` [PATCH 1/3] " Jan Weitzel
2012-07-19 13:09       ` Sascha Hauer
2012-07-18 12:37 ` [PATCH 2/3] gpmc: Add reset to gpmc_generic_init Jan Weitzel
2012-07-18 22:10   ` Sascha Hauer
2012-07-19  7:58     ` [PATCH 2/3 v2] " Jan Weitzel
2012-07-20  7:20       ` Sascha Hauer
2012-07-18 12:37 ` [RFC 3/3] mtd omap nand: reconfigure buswidth Jan Weitzel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120718221127.GS30009@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=j.weitzel@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox