mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
Date: Mon, 23 Jul 2012 08:26:48 +0200	[thread overview]
Message-ID: <20120723062648.GU30009@pengutronix.de> (raw)
In-Reply-To: <20120723062440.GT30009@pengutronix.de>

On Mon, Jul 23, 2012 at 08:24:40AM +0200, Sascha Hauer wrote:
> Hi Jean-Christophe,
> 
> On Sun, Jul 22, 2012 at 09:31:36PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Keep the previous target untouched.
> > This will allow to do not brake the modules support.
> 
> This breaks images which use barebox.bin as an input for their SoC
> specific image, like MLO (Omap xload), barebox.netx, barebox.s5p

If you want to do this, you have to add a make variable for the target
which can be used for these SoC images.

Sascha

> 
> Sascha
> 
> > 
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> > This patch apply over my previous patch series that add gzip support
> > 
> > Best Regards,
> > J.
> >  Makefile     |   49 ++++++++++++++++++++++++++-----------------------
> >  piggy.gzip.S |    2 +-
> >  piggy.lzo.S  |    2 +-
> >  3 files changed, 28 insertions(+), 25 deletions(-)
> > 
> > diff --git a/Makefile b/Makefile
> > index 1003786..16a81d3 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -300,6 +300,7 @@ CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
> >  AFLAGS          := -D__ASSEMBLY__
> >  
> >  LDFLAGS_barebox	:= -Map barebox.map
> > +LDFLAGS_zbarebox	:= -Map zbarebox.map
> >  
> >  # Read KERNELRELEASE from include/config/kernel.release (if it exists)
> >  KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
> > @@ -441,7 +442,10 @@ endif # $(dot-config)
> >  # command line.
> >  # This allow a user to issue only 'make' to build a kernel
> >  # Defaults barebox but it is usually overridden in the arch makefile
> > -all: barebox.bin
> > +
> > +zbarebox.bin-$(CONFIG_IMAGE_COMPRESSION) := zbarebox.bin
> > +
> > +all: barebox.bin $(zbarebox.bin-y)
> >  
> >  include $(srctree)/arch/$(ARCH)/Makefile
> >  
> > @@ -672,11 +676,13 @@ quiet_cmd_objcopy = OBJCOPY $@
> >        cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
> >  
> >  OBJCOPYFLAGS_barebox.bin = -O binary
> > -OBJCOPYFLAGS_barebox-uncompressed.bin = -O binary
> > +OBJCOPYFLAGS_zbarebox.bin = -O binary
> >  
> >  barebox.bin: barebox FORCE
> >  	$(call if_changed,objcopy)
> > +ifndef CONFIG_IMAGE_COMPRESSION
> >  	$(call cmd,check_file_size,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE))
> > +endif
> >  
> >  ifdef CONFIG_X86
> >  barebox.S: barebox
> > @@ -706,46 +712,43 @@ quiet_cmd_disasm = DISASM  $@
> >  
> >  barebox.S: barebox FORCE
> >  	$(call if_changed,disasm)
> > -barebox-uncompressed.S: barebox-uncompressed FORCE
> > +zbarebox.S: zbarebox FORCE
> >  	$(call if_changed,disasm)
> >  endif
> >  
> >  # barebox image
> > -barebox-uncompressed: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o)
> > +barebox: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o) FORCE
> >  	$(call barebox-modpost)
> >  	$(call if_changed_rule,barebox__)
> >  	$(Q)rm -f .old_version
> >  
> > -barebox-uncompressed.bin: barebox-uncompressed
> > -	$(call if_changed,objcopy)
> > -
> >  suffix_$(CONFIG_IMAGE_COMPRESSION_GZIP) = gzip
> >  suffix_$(CONFIG_IMAGE_COMPRESSION_LZO)	= lzo
> >  
> > -barebox-uncompressed.bin.gzip: barebox-uncompressed.bin
> > +barebox.bin.gzip: barebox.bin
> >  	@echo "  GZIP   " $@
> > -	$(Q)gzip -n -9 -c barebox-uncompressed.bin > $@
> > +	$(Q)gzip -n -9 -c barebox.bin > $@
> >  
> > -barebox-uncompressed.bin.lzo: barebox-uncompressed.bin
> > +barebox.bin.lzo: barebox.bin
> >  	@echo "  LZO    " $@
> > -	$(Q)lzop -f -9 -o $@ barebox-uncompressed.bin
> > +	$(Q)lzop -f -9 -o $@ barebox.bin
> >  
> > -piggy.$(suffix_y).o: barebox-uncompressed.bin.$(suffix_y) $(src)/piggy.$(suffix_y).S
> > +piggy.$(suffix_y).o:  barebox.bin.$(suffix_y) FORCE
> >  	@echo "  CC     " $@
> >  	$(Q)$(CC) $(CFLAGS) $(CPPFLAGS) -c $(src)/piggy.$(suffix_y).S -o $@
> >  
> > -ifdef CONFIG_IMAGE_COMPRESSION
> > -barebox: piggy.$(suffix_y).o $(barebox-comp)
> > +zbarebox: piggy.$(suffix_y).o $(barebox-comp) FORCE
> >  	@echo "  LD     " $@ $(barebox-comp)
> > -	$(Q)$(LD) $(LDFLAGS) $(LDFLAGS_barebox) -o $@ \
> > +	$(Q)$(LD) $(LDFLAGS) $(LDFLAGS_zbarebox) -o $@ \
> >  		-T $(barebox-compressed-lds) \
> >  		--start-group $(barebox-comp) $(comp-arch-y) piggy.$(suffix_y).o --end-group
> > -else
> > -barebox: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o) FORCE
> > -	$(call barebox-modpost)
> > -	$(call if_changed_rule,barebox__)
> > -	$(Q)rm -f .old_version
> > -endif
> > +
> > +zbarebox.bin: zbarebox 
> > +	$(call if_changed,objcopy)
> > +	$(call cmd,check_file_size,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE))
> > +
> > +zbarebox.srec: zbarebox
> > +	$(OBJCOPY) -O srec $< $@
> >  
> >  barebox.srec: barebox
> >  	$(OBJCOPY) -O srec $< $@
> > @@ -1040,11 +1043,11 @@ endif # CONFIG_MODULES
> >  # Directories & files removed with 'make clean'
> >  CLEAN_DIRS  += $(MODVERDIR)
> >  CLEAN_FILES +=	barebox System.map include/generated/barebox_default_env.h \
> > -                .tmp_version .tmp_barebox* barebox.bin barebox.map barebox.S \
> > +                .tmp_version .tmp_barebox* barebox.* \
> >  		.tmp_kallsyms* barebox_default_env* barebox.ldr \
> >  		scripts/bareboxenv-target \
> >  		Doxyfile.version barebox.srec barebox.s5p \
> > -		barebox-uncompressed barebox-uncompressed.bin*
> > +		zbarebox*
> >  
> >  # Directories & files removed with 'make mrproper'
> >  MRPROPER_DIRS  += include/config include2 usr/include
> > diff --git a/piggy.gzip.S b/piggy.gzip.S
> > index 2ca7d78..ffd85cb 100644
> > --- a/piggy.gzip.S
> > +++ b/piggy.gzip.S
> > @@ -1,6 +1,6 @@
> >  	.section .piggydata,#alloc
> >  	.globl  input_data
> >  input_data:
> > -	.incbin "barebox-uncompressed.bin.gzip"
> > +	.incbin "barebox.bin.gzip"
> >  	.globl  input_data_end
> >  input_data_end:
> > diff --git a/piggy.lzo.S b/piggy.lzo.S
> > index 6cc618d..ae5b2db 100644
> > --- a/piggy.lzo.S
> > +++ b/piggy.lzo.S
> > @@ -1,6 +1,6 @@
> >  	.section .piggydata,#alloc
> >  	.globl  input_data
> >  input_data:
> > -	.incbin "barebox-uncompressed.bin.lzo"
> > +	.incbin "barebox.bin.lzo"
> >  	.globl  input_data_end
> >  input_data_end:
> > -- 
> > 1.7.10
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-07-23  6:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-22 19:31 Jean-Christophe PLAGNIOL-VILLARD
2012-07-23  6:24 ` Sascha Hauer
2012-07-23  6:26   ` Sascha Hauer [this message]
2012-07-23  6:30     ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-23  6:28   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120723062648.GU30009@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox