From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jan Weitzel <j.weitzel@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] xload: get barebox size from barebox_arm_head
Date: Wed, 29 Aug 2012 08:59:29 +0200 [thread overview]
Message-ID: <20120829065929.GO26594@pengutronix.de> (raw)
In-Reply-To: <1346157381-16420-1-git-send-email-j.weitzel@phytec.de>
On Tue, Aug 28, 2012 at 02:36:21PM +0200, Jan Weitzel wrote:
> Add functions to read the barebox_arm_head, check barebox magicword
> and read out the barebox image size.
> Create a inital partion of 1Mb to access the barebox image on nand.
The patch neither applies on next or on master. On which branch did you
apply this?
Sascha
>
> Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> ---
> v2: remove fall back if header read fail
>
> arch/arm/include/asm/barebox-arm-head.h | 4 ++
> arch/arm/mach-omap/include/mach/xload.h | 2 +-
> arch/arm/mach-omap/xload.c | 58 ++++++++++++++++++++++++++++--
> 3 files changed, 59 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/include/asm/barebox-arm-head.h b/arch/arm/include/asm/barebox-arm-head.h
> index 0dc3074..521bcf6 100644
> --- a/arch/arm/include/asm/barebox-arm-head.h
> +++ b/arch/arm/include/asm/barebox-arm-head.h
> @@ -1,6 +1,10 @@
> #ifndef __ASM_ARM_HEAD_H
> #define __ASM_ARM_HEAD_H
>
> +#define ARM_HEAD_SIZE 0x30
> +#define HEAD_MAGICWORD_OFFSET 0x20
> +#define HEAD_SIZE_OFFSET 0x2C
> +
> static inline void barebox_arm_head(void)
> {
> __asm__ __volatile__ (
> diff --git a/arch/arm/mach-omap/include/mach/xload.h b/arch/arm/mach-omap/include/mach/xload.h
> index 844b57f..26f1b68 100644
> --- a/arch/arm/mach-omap/include/mach/xload.h
> +++ b/arch/arm/mach-omap/include/mach/xload.h
> @@ -1,7 +1,7 @@
> #ifndef _MACH_XLOAD_H
> #define _MACH_XLOAD_H
>
> -void *omap_xload_boot_nand(int offset, int size);
> +void *omap_xload_boot_nand(int offset);
> void *omap_xload_boot_mmc(void);
>
> enum omap_boot_src {
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 9a6b0b4..0be0c50 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -7,16 +7,66 @@
> #include <fcntl.h>
> #include <mach/xload.h>
> #include <sizes.h>
> +#include <asm/barebox-arm-head.h>
>
> -void *omap_xload_boot_nand(int offset, int size)
> +void *read_image_head(const char *name)
> {
> + void *header = xmalloc(ARM_HEAD_SIZE);
> + struct cdev *cdev;
> int ret;
> - void *to = xmalloc(size);
> +
> + cdev = cdev_open(name, O_RDONLY);
> + if (!cdev) {
> + printf("failed to open partition\n");
> + return NULL;
> + }
> +
> + ret = cdev_read(cdev, header, ARM_HEAD_SIZE, 0, 0);
> + cdev_close(cdev);
> +
> + if (ret != ARM_HEAD_SIZE) {
> + printf("failed to read from partition\n");
> + return NULL;
> + }
> +
> + return header;
> +}
> +
> +unsigned int get_image_size(void *head)
> +{
> + unsigned int ret = 0;
> + unsigned int *psize = head + HEAD_SIZE_OFFSET;
> + const char *pmagic = head + HEAD_MAGICWORD_OFFSET;
> +
> + if (!strcmp(pmagic, "barebox"))
> + ret = *psize;
> + debug("Detected barebox image size %u\n", ret);
> +
> + return ret;
> +}
> +
> +void *omap_xload_boot_nand(int offset)
> +{
> + int ret;
> + int size;
> + void *to, *header;
> struct cdev *cdev;
>
> - devfs_add_partition("nand0", offset, size, PARTITION_FIXED, "x");
> + devfs_add_partition("nand0", offset, SZ_1M, PARTITION_FIXED, "x");
> dev_add_bb_dev("x", "bbx");
>
> + header = get_image_size(read_image_head("bbx"));
> + if (header == NULL)
> + return NULL;
> +
> + size = get_image_size(header);
> + if (!size) {
> + printf("failed to get image size\n");
> + return NULL;
> + }
> +
> + to = xmalloc(size);
> +
> cdev = cdev_open("bbx", O_RDONLY);
> if (!cdev) {
> printf("failed to open nand\n");
> @@ -80,7 +130,7 @@ int run_shell(void)
> printf("unknown boot source. Fall back to nand\n");
> case OMAP_BOOTSRC_NAND:
> printf("booting from NAND\n");
> - func = omap_xload_boot_nand(SZ_128K, SZ_512K);
> + func = omap_xload_boot_nand(SZ_128K);
> break;
> }
>
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-29 6:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 10:56 [RFC] " Jan Weitzel
2012-08-28 6:54 ` Sascha Hauer
2012-08-28 8:41 ` Jan Weitzel
2012-08-28 9:08 ` Sascha Hauer
2012-08-28 12:36 ` [PATCH v2] " Jan Weitzel
2012-08-29 6:59 ` Sascha Hauer [this message]
2012-08-29 8:01 ` Jan Weitzel
2012-08-29 9:10 ` [PATCH v3] " Jan Weitzel
2012-08-29 12:21 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 7:34 ` Jan Weitzel
2012-09-04 9:28 ` Sascha Hauer
2012-09-04 12:27 ` Jan Weitzel
2012-09-04 14:41 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 8:22 ` [PATCH v4] " Jan Weitzel
2012-09-05 10:34 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 11:37 ` Suspected ##SPAM## -:Re: " Jan Weitzel
2012-09-05 12:02 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120829065929.GO26594@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=j.weitzel@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox