From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1T7Lj4-0005FC-DZ for barebox@lists.infradead.org; Fri, 31 Aug 2012 07:33:10 +0000 Date: Fri, 31 Aug 2012 09:33:06 +0200 From: Sascha Hauer Message-ID: <20120831073306.GM26594@pengutronix.de> References: <1346329850-3866-1-git-send-email-s.trumtrar@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1346329850-3866-1-git-send-email-s.trumtrar@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 0/3] ARM i.MX6: basic USB H1 support To: Steffen Trumtrar Cc: barebox@lists.infradead.org On Thu, Aug 30, 2012 at 02:30:47PM +0200, Steffen Trumtrar wrote: > This series adds basic support for usb host1 on imx6q. This was tested on a > sabrelite board. > > Steffen Trumtrar (3): > ARM i.MX6: add the usbphy1 base addr > ARM i.MX6: enable usbphy1 > usb: use ep-specific pwrgood delay Applied, thanks. I also applied 3/3 from which I know that it currently does not help Eric. It's a step in the right direction and I hope that there might be something else wrong on his hardware. BTW, Eric, does the hub work under Linux? It also should not work there when Linux also uses 100ms. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox