From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Jan Luebbe <jlu@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs
Date: Mon, 3 Sep 2012 18:32:27 +0200 [thread overview]
Message-ID: <20120903163227.GH19931@game.jcrosoft.org> (raw)
In-Reply-To: <1346672765-16162-11-git-send-email-jlu@pengutronix.de>
On 13:46 Mon 03 Sep , Jan Luebbe wrote:
> Also create devices for OMAP3.
>
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
> arch/arm/mach-omap/include/mach/mcspi.h | 11 +
> arch/arm/mach-omap/include/mach/omap3-devices.h | 34 ++
> drivers/spi/Kconfig | 6 +
> drivers/spi/Makefile | 1 +
> drivers/spi/omap3_spi.c | 403 +++++++++++++++++++++++
> drivers/spi/omap3_spi.h | 100 ++++++
> 6 files changed, 555 insertions(+)
> create mode 100644 arch/arm/mach-omap/include/mach/mcspi.h
> create mode 100644 arch/arm/mach-omap/include/mach/omap3-devices.h
> create mode 100644 drivers/spi/omap3_spi.c
> create mode 100644 drivers/spi/omap3_spi.h
>
> diff --git a/arch/arm/mach-omap/include/mach/mcspi.h b/arch/arm/mach-omap/include/mach/mcspi.h
> new file mode 100644
> index 0000000..dbde67a
> --- /dev/null
> +++ b/arch/arm/mach-omap/include/mach/mcspi.h
> @@ -0,0 +1,11 @@
> +#ifndef __OMAP_MCSPI_H
> +#define __OMAP_MCSPI_H
> +
> +#define OMAP3_MCSPI1_BASE 0x48098000
> +#define OMAP3_MCSPI2_BASE 0x4809A000
> +#define OMAP3_MCSPI3_BASE 0x480B8000
> +#define OMAP3_MCSPI4_BASE 0x480BA000
> +
> +int mcspi_devices_init(void);
> +
> +#endif /* __OMAP_MCSPI_H */
> diff --git a/arch/arm/mach-omap/include/mach/omap3-devices.h b/arch/arm/mach-omap/include/mach/omap3-devices.h
> new file mode 100644
> index 0000000..2db8583
> --- /dev/null
> +++ b/arch/arm/mach-omap/include/mach/omap3-devices.h
> @@ -0,0 +1,34 @@
> +#include <driver.h>
> +#include <sizes.h>
> +
> +#include <mach/mcspi.h>
> +
> +/* the device numbering is the same as in the device tree */
> +
this avoid duplicaation
static inline struct device_d *omap3_add_spi(int id, resource_t start)
{
return add_generic_device("omap3_spi", id, NULL, start, SZ_4K,
IORESOURCE_MEM, NULL);
}
static inline struct device_d *omap3_add_spi1(void)
{
return omap3_add_spi(1, OMAP3_MCSPI1_BASE);
}
static inline struct device_d *omap3_add_spi2(void)
{
return omap3_add_spi(2, OMAP3_MCSPI2_BASE);
}
...
really DROP this struct way to describe the register it's too much dangerous
to modiffy and maintian
Best Regards,
J.
> +static inline struct device_d *omap3_add_spi1(void)
> +{
> + return add_generic_device("omap3_spi", 1, NULL,
> + OMAP3_MCSPI1_BASE, SZ_4K,
> + IORESOURCE_MEM, NULL);
> +}
> +
> +static inline struct device_d *omap3_add_spi2(void)
> +{
> + return add_generic_device("omap3_spi", 2, NULL,
> + OMAP3_MCSPI2_BASE, SZ_4K,
> + IORESOURCE_MEM, NULL);
> +}
> +
> +static inline struct device_d *omap3_add_spi3(void)
> +{
> + return add_generic_device("omap3_spi", 3, NULL,
> + OMAP3_MCSPI3_BASE, SZ_4K,
> + IORESOURCE_MEM, NULL);
> +}
> +
> +static inline struct device_d *omap3_add_spi4(void)
> +{
> + return add_generic_device("omap3_spi", 4, NULL,
> + OMAP3_MCSPI4_BASE, SZ_4K,
> + IORESOURCE_MEM, NULL);
> +}
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index a249b81..ba1b948 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -34,4 +34,10 @@ config DRIVER_SPI_ATMEL
> depends on ARCH_AT91
> depends on SPI
>
> +
> +config DRIVER_SPI_OMAP3
> + bool "OMAP3 McSPI Master driver"
> + depends on ARCH_OMAP3
> + depends on SPI
> +
> endmenu
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 101652f..b53061e 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -2,3 +2,4 @@ obj-$(CONFIG_SPI) += spi.o
> obj-$(CONFIG_DRIVER_SPI_IMX) += imx_spi.o
> obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o
> obj-$(CONFIG_DRIVER_SPI_ATMEL) += atmel_spi.o
> +obj-$(CONFIG_DRIVER_SPI_OMAP3) += omap3_spi.o
> diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
> new file mode 100644
> index 0000000..eadb78d
> --- /dev/null
> +++ b/drivers/spi/omap3_spi.c
> @@ -0,0 +1,403 @@
> +/*
> + * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
> + *
> + * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
> + *
> + * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
> + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * Copyright (C) 2007 Atmel Corporation
> + *
> + * Parts taken from linux/drivers/spi/omap2_mcspi.c
> + * Copyright (C) 2005, 2006 Nokia Corporation
> + *
> + * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <errno.h>
> +#include <spi/spi.h>
> +#include <malloc.h>
> +#include <io.h>
> +#include "omap3_spi.h"
> +
> +#define WORD_LEN 8
> +#define SPI_WAIT_TIMEOUT 30000000
> +
> +#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
> +#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
> +
> +static void spi_reset(struct spi_master *master)
> +{
> + struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
> + struct mcspi __iomem *regs = omap3_master->regs;
> + unsigned int tmp;
> +
> + writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, ®s->sysconfig);
> + do {
> + tmp = readl(®s->sysstatus);
> + } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
> +
> + writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
> + OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
> + OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
> + ®s->sysconfig);
> +
> + writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, ®s->wakeupenable);
> +}
> +
> +int spi_claim_bus(struct spi_device *spi)
> +{
> + struct spi_master *master = spi->master;
> + struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
> + struct mcspi __iomem *regs = omap3_master->regs;
> + unsigned int conf, div = 0;
> +
> + /* McSPI global module configuration */
> +
> + /*
> + * setup when switching from (reset default) slave mode
> + * to single-channel master mode
> + */
> + conf = readl(®s->modulctrl);
> + conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
> + conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
> + writel(conf, ®s->modulctrl);
> +
> + /* McSPI individual channel configuration */
> +
> + /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
> + if (spi->max_speed_hz) {
> + while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
> + > spi->max_speed_hz)
> + div++;
> + } else
> + div = 0xC;
> +
> + conf = readl(®s->channel[spi->chip_select].chconf);
> +
> + /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
> + * REVISIT: this controller could support SPI_3WIRE mode.
> + */
> + conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
> + conf |= OMAP3_MCSPI_CHCONF_DPE0;
> +
> + /* wordlength */
> + conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
> + conf |= (WORD_LEN - 1) << 7;
> +
> + /* set chipselect polarity; manage with FORCE */
> + if (!(spi->mode & SPI_CS_HIGH))
> + conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
> + else
> + conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
> +
> + /* set clock divisor */
> + conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
> + conf |= div << 2;
> +
> + /* set SPI mode 0..3 */
> + if (spi->mode & SPI_CPOL)
> + conf |= OMAP3_MCSPI_CHCONF_POL;
> + else
> + conf &= ~OMAP3_MCSPI_CHCONF_POL;
> + if (spi->mode & SPI_CPHA)
> + conf |= OMAP3_MCSPI_CHCONF_PHA;
> + else
> + conf &= ~OMAP3_MCSPI_CHCONF_PHA;
> +
> + /* Transmit & receive mode */
> + conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
> +
> + writel(conf, ®s->channel[spi->chip_select].chconf);
> + readl(®s->channel[spi->chip_select].chconf);
> +
> + return 0;
> +}
> +
> +int omap3_spi_write(struct spi_device *spi, unsigned int len, const u8 *txp,
> + unsigned long flags)
> +{
> + struct spi_master *master = spi->master;
> + struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
> + struct mcspi __iomem *regs = omap3_master->regs;
> + int i;
> + int timeout = SPI_WAIT_TIMEOUT;
> + int chconf = readl(®s->channel[spi->chip_select].chconf);
> +
> + if (flags & SPI_XFER_BEGIN)
> + writel(OMAP3_MCSPI_CHCTRL_EN,
> + ®s->channel[spi->chip_select].chctrl);
> +
> + chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
> + chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
> + chconf |= OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf, ®s->channel[spi->chip_select].chconf);
> + readl(®s->channel[spi->chip_select].chconf);
> +
> + for (i = 0; i < len; i++) {
> + /* wait till TX register is empty (TXS == 1) */
> + while (!(readl(®s->channel[spi->chip_select].chstat) &
> + OMAP3_MCSPI_CHSTAT_TXS)) {
> + if (--timeout <= 0) {
> + printf("SPI TXS timed out, status=0x%08x\n",
> + readl(®s->channel[spi->chip_select].chstat));
> + return -1;
> + }
> + }
> + /* Write the data */
> + writel(txp[i], ®s->channel[spi->chip_select].tx);
> + }
> +
> + if (flags & SPI_XFER_END) {
> + /* wait to finish of transfer */
> + while (!(readl(®s->channel[spi->chip_select].chstat) &
> + OMAP3_MCSPI_CHSTAT_EOT));
> +
> + chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf, ®s->channel[spi->chip_select].chconf);
> +
> + writel(0, ®s->channel[spi->chip_select].chctrl);
> + }
> +
> + while (!(readl(®s->channel[spi->chip_select].chstat) &
> + OMAP3_MCSPI_CHSTAT_TXS));
> + while (!(readl(®s->channel[spi->chip_select].chstat) &
> + OMAP3_MCSPI_CHSTAT_EOT));
> +
> + return 0;
> +}
> +
> +int omap3_spi_read(struct spi_device *spi, unsigned int len, u8 *rxp,
> + unsigned long flags)
> +{
> + struct spi_master *master = spi->master;
> + struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
> + struct mcspi __iomem *regs = omap3_master->regs;
> + int i;
> + int timeout = SPI_WAIT_TIMEOUT;
> + int chconf = readl(®s->channel[spi->chip_select].chconf);
> +
> + if (flags & SPI_XFER_BEGIN)
> + writel(OMAP3_MCSPI_CHCTRL_EN,
> + ®s->channel[spi->chip_select].chctrl);
> +
> + chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
> + chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
> + chconf |= OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf, ®s->channel[spi->chip_select].chconf);
> + readl(®s->channel[spi->chip_select].chconf);
> + writel(0, ®s->channel[spi->chip_select].tx);
> +
> + for (i = 0; i < len; i++) {
> + /* Wait till RX register contains data (RXS == 1) */
> + while (!(readl(®s->channel[spi->chip_select].chstat) &
> + OMAP3_MCSPI_CHSTAT_RXS)) {
> + if (--timeout <= 0) {
> + printf("SPI RXS timed out, status=0x%08x\n",
> + readl(®s->channel[spi->chip_select].chstat));
> + return -1;
> + }
> + }
> + /* Read the data */
> + rxp[i] = readl(®s->channel[spi->chip_select].rx);
> + }
> +
> + if (flags & SPI_XFER_END) {
> + chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf, ®s->channel[spi->chip_select].chconf);
> + readl(®s->channel[spi->chip_select].chconf);
> +
> + writel(0, ®s->channel[spi->chip_select].chctrl);
> + }
> +
> + return 0;
> +}
> +
> +int spi_xfer(struct spi_device *spi, struct spi_transfer *t, unsigned long flags)
> +{
> + struct spi_master *master = spi->master;
> + struct omap3_spi_master *omap3_master = container_of(master, struct omap3_spi_master, master);
> + struct mcspi __iomem *regs = omap3_master->regs;
> + unsigned int len = t->len;
> + int ret = -1;
> + const u8 *txp = t->tx_buf; /* can be NULL for read operation */
> + u8 *rxp = t->rx_buf; /* can be NULL for write operation */
> +
> + if (len == 0) { /* only change CS */
> + int chconf = readl(®s->channel[spi->chip_select].chconf);
> +
> + if (flags & SPI_XFER_BEGIN) {
> + writel(OMAP3_MCSPI_CHCTRL_EN,
> + ®s->channel[spi->chip_select].chctrl);
> + chconf |= OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf,
> + ®s->channel[spi->chip_select].chconf);
> + readl(®s->channel[spi->chip_select].chconf);
> + }
> +
> + if (flags & SPI_XFER_END) {
> + chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
> + writel(chconf,
> + ®s->channel[spi->chip_select].chconf);
> + writel(0, ®s->channel[spi->chip_select].chctrl);
> + readl(®s->channel[spi->chip_select].chconf);
> + }
> +
> + ret = 0;
> + } else {
> + if (t->tx_buf != NULL)
> + ret = omap3_spi_write(spi, len, txp, flags);
> +
> + if (t->rx_buf != NULL)
> + ret = omap3_spi_read(spi, len, rxp, flags);
> + }
> + return ret;
> +}
> +
> +static int omap3_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
> +{
> + struct spi_master *master = spi->master;
> + struct spi_transfer *t, *t_first, *t_last = NULL;
> + unsigned long flags;
> + int ret = 0;
> +
> + ret = spi_claim_bus(spi);
> + if (ret)
> + return ret;
> +
> + if (list_empty(&mesg->transfers))
> + return 0;
> +
> + t_first = list_first_entry(&mesg->transfers, struct spi_transfer, transfer_list);
> + t_last = list_last_entry(&mesg->transfers, struct spi_transfer, transfer_list);
> +
> + mesg->actual_length = 0;
> +
> + dev_dbg(master->dev, "transfer start actual_length=%i\n", mesg->actual_length);
> + list_for_each_entry(t, &mesg->transfers, transfer_list) {
> + dev_dbg(master->dev,
> + " xfer %p: len %u tx %p rx %p\n",
> + t, t->len, t->tx_buf, t->rx_buf);
> + flags = 0;
> + if (t == t_first)
> + flags |= SPI_XFER_BEGIN;
> + if (t == t_last)
> + flags |= SPI_XFER_END;
> + spi_xfer(spi, t, flags);
> + mesg->actual_length += t->len;
> + }
> + dev_dbg(master->dev, "transfer done actual_length=%i\n", mesg->actual_length);
> +
> + return ret;
> +}
> +
> +static int omap3_spi_setup(struct spi_device *spi)
> +{
> + struct spi_master *master = spi->master;
> +
> + if (((master->bus_num == 0) && (spi->chip_select > 3)) ||
> + ((master->bus_num == 1) && (spi->chip_select > 1)) ||
> + ((master->bus_num == 2) && (spi->chip_select > 1)) ||
> + ((master->bus_num == 3) && (spi->chip_select > 0))) {
> + printf("SPI error: unsupported chip select %i \
> + on bus %i\n", spi->chip_select, master->bus_num);
> + return -1;
> + }
> +
> + if (spi->max_speed_hz > OMAP3_MCSPI_MAX_FREQ) {
> + printf("SPI error: unsupported frequency %i Hz. \
> + Max frequency is 48 Mhz\n", spi->max_speed_hz);
> + return -1;
> + }
> +
> + if (spi->mode > SPI_MODE_3) {
> + printf("SPI error: unsupported SPI mode %i\n", spi->mode);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int omap3_spi_probe(struct device_d *dev)
> +{
> + struct spi_master *master;
> + struct omap3_spi_master *omap3_master;
> +
> + omap3_master = xzalloc(sizeof(*omap3_master));
> +
> + master = &omap3_master->master;
> + master->dev = dev;
> +
> + /*
> + * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
> + * with different number of chip selects (CS, channels):
> + * McSPI1 has 4 CS (bus 0, cs 0 - 3)
> + * McSPI2 has 2 CS (bus 1, cs 0 - 1)
> + * McSPI3 has 2 CS (bus 2, cs 0 - 1)
> + * McSPI4 has 1 CS (bus 3, cs 0)
> + */
> +
> + master->bus_num = dev->id;
> + switch (master->bus_num) {
> + case 1:
> + master->num_chipselect = 4;
> + break;
> + case 2:
> + master->num_chipselect = 2;
> + break;
> + case 3:
> + master->num_chipselect = 2;
> + break;
> + case 4:
> + master->num_chipselect = 1;
> + break;
> + default:
> + printf("SPI error: unsupported bus %i. \
> + Supported busses 1 - 4\n", master->bus_num);
> + return -ENODEV;
> + }
> + master->setup = omap3_spi_setup;
> + master->transfer = omap3_spi_transfer;
> +
> + omap3_master->regs = (struct mcspi *)dev_request_mem_region(dev, 0);;
> +
> + spi_reset(master);
> +
> + spi_register_master(master);
> +
> + return 0;
> +}
> +
> +static struct driver_d omap3_spi_driver = {
> + .name = "omap3_spi",
> + .probe = omap3_spi_probe,
> +};
> +
> +static int omap3_spi_init(void)
> +{
> + return register_driver(&omap3_spi_driver);
> +}
> +
> +device_initcall(omap3_spi_init);
> diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
> new file mode 100644
> index 0000000..2ad8ef7
> --- /dev/null
> +++ b/drivers/spi/omap3_spi.h
> @@ -0,0 +1,100 @@
> +/*
> + * Register definitions for the OMAP3 McSPI Controller
> + *
> + * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
> + *
> + * Parts taken from linux/drivers/spi/omap2_mcspi.c
> + * Copyright (C) 2005, 2006 Nokia Corporation
> + *
> + * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef _OMAP3_SPI_H_
> +#define _OMAP3_SPI_H_
> +
> +#define OMAP3_MCSPI_MAX_FREQ 48000000
> +
> +/* OMAP3 McSPI registers */
> +struct mcspi_channel {
> + unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
> + unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
> + unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
> + unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
> + unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
> +};
> +
> +struct mcspi {
> + unsigned char res1[0x10];
> + unsigned int sysconfig; /* 0x10 */
> + unsigned int sysstatus; /* 0x14 */
> + unsigned int irqstatus; /* 0x18 */
> + unsigned int irqenable; /* 0x1C */
> + unsigned int wakeupenable; /* 0x20 */
> + unsigned int syst; /* 0x24 */
> + unsigned int modulctrl; /* 0x28 */
> + struct mcspi_channel channel[4]; /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
> + /* channel1: 0x40 - 0x50, bus 0 & 1 */
> + /* channel2: 0x54 - 0x64, bus 0 & 1 */
> + /* channel3: 0x68 - 0x78, bus 0 */
> +};
> +
> +/* per-register bitmasks */
> +#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
> +#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
> +#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
> +#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
> +
> +#define OMAP3_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
> +
> +#define OMAP3_MCSPI_MODULCTRL_SINGLE (1 << 0)
> +#define OMAP3_MCSPI_MODULCTRL_MS (1 << 2)
> +#define OMAP3_MCSPI_MODULCTRL_STEST (1 << 3)
> +
> +#define OMAP3_MCSPI_CHCONF_PHA (1 << 0)
> +#define OMAP3_MCSPI_CHCONF_POL (1 << 1)
> +#define OMAP3_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
> +#define OMAP3_MCSPI_CHCONF_EPOL (1 << 6)
> +#define OMAP3_MCSPI_CHCONF_WL_MASK (0x1f << 7)
> +#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12)
> +#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12)
> +#define OMAP3_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
> +#define OMAP3_MCSPI_CHCONF_DMAW (1 << 14)
> +#define OMAP3_MCSPI_CHCONF_DMAR (1 << 15)
> +#define OMAP3_MCSPI_CHCONF_DPE0 (1 << 16)
> +#define OMAP3_MCSPI_CHCONF_DPE1 (1 << 17)
> +#define OMAP3_MCSPI_CHCONF_IS (1 << 18)
> +#define OMAP3_MCSPI_CHCONF_TURBO (1 << 19)
> +#define OMAP3_MCSPI_CHCONF_FORCE (1 << 20)
> +
> +#define OMAP3_MCSPI_CHSTAT_RXS (1 << 0)
> +#define OMAP3_MCSPI_CHSTAT_TXS (1 << 1)
> +#define OMAP3_MCSPI_CHSTAT_EOT (1 << 2)
> +
> +#define OMAP3_MCSPI_CHCTRL_EN (1 << 0)
> +
> +#define OMAP3_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
> +
> +struct omap3_spi_master {
> + struct spi_master master;
> + struct mcspi __iomem *regs;
> +};
> +
> +#endif /* _OMAP3_SPI_H_ */
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-03 16:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-03 11:45 Prepare support for TI AM35xx Jan Luebbe
2012-09-03 11:45 ` [PATCH 01/10] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-09-03 11:45 ` [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl Jan Luebbe
2012-09-04 8:20 ` Sascha Hauer
2012-09-03 11:45 ` [PATCH 03/10] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-09-03 16:22 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-03 11:45 ` [PATCH 04/10] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-09-04 8:27 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 05/10] common: split out meminfo output and make it optional Jan Luebbe
2012-09-03 11:46 ` [PATCH 06/10] omap: add SPI as a boot mode for xload Jan Luebbe
2012-09-03 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 7:41 ` Jan Weitzel
2012-09-03 11:46 ` [PATCH 07/10] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-09-03 11:46 ` [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-09-03 16:27 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 8:42 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-09-04 8:48 ` Sascha Hauer
2012-09-05 9:28 ` Jan Lübbe
2012-09-03 11:46 ` [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-09-03 16:32 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-04 8:58 ` Sascha Hauer
2012-09-05 9:20 ` Jan Lübbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120903163227.GH19931@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=jlu@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox